Innovative Technology Electronics UOTUNE6 Hexagon Speaker User Manual 1

INNOVATIVE TECHNOLOGY ELECTRONICS LLC Hexagon Speaker 1

Users manual

PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENTKEEP IT IN A SAFE PLACE FOR FUTURE REFERENCEBC006_ D
DANGEROUS VOLTAGE:The lighting flash with arrowhead symbol withinan equilateral triangle is intended to alert the user to the presence ofuninsulated “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk of electric shock to persons.ATTENTION:The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSETHIS UNIT TO RAIN OR MOISTURE.WARNING: USE UNDER SUPERVISION OF AN ADULT DUE TO LONGCORD This unit has a long cord that can be easily tripped on or pulled on,causing injury. Please make sure it is arranged so that it will not drape over atabletop, etc. Where it can be pulled on by children or tripped over accidentally.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interferencethat may cause undesired operation.CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THECOVER (OR BACK). NO USER SERVICEABLE PART INSIDE, REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN2IC statement: (1) this device may not cause interference, and This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (2) this device must accept any interference, including interference that may cause undesired operation of the device.
●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.●CAUTION: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment. FCC WARNING:To assure continued operation, follow the attached installation instructions anduse only shield cables when connecting to other devices. Changes ormodifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.Before using the unit, be sure to read all operating instruction carefully, pleasenote that these are general precautions and may not pertain to your unit. Forexample, this unit may not have the capability to be connected to an outdoorantenna.1. Read these instructionsAll the safety and operating instructions should be read before the appliance isoperated.2. Keep these instructionsThe safety and operating instructions should be kept for future reference.3. Heed all warningsAll warnings on the appliance and in the operating instructions should beadhered to.4. Follow all instructionsAll operation and use instructions should be followed.FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:5. Do not use this apparatus near waterThe appliance should not be used near water; for example, near a bath tub,3
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimmingpool.6. Clean only with dry clothThe appliance should be cleaned only as recommended by the manufacturer.7. Do not block any ventilation openings.Install in accordance with themanufacturer’s instructions.Slots and openings in the cabinet and in the back or bottom are provided forventilation, to ensure reliable operation of the product and to protect it fromoverheating. These openings must not be blocked or covered. The openingsshould never be blocked by placing the product on a bed, sofa, rug, or similarsurface. This product should never be placed near or over a radiator or heatsource. This product should not be placed in a built-in installation, such as abookcase or rack unless proper ventilation is provided or the manufacturer’sinstructions have been adhered to.8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other. Agrounding type plug has two blades and a third grounding prong. Thewide or the third prong are provided for your safety. If the provided plugdoes not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10. Protect the power cord from being walked on or pinched particularlyat plugs, convenience receptacles, and the point where they exit from theapparatus.11. Only use attachments / accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving thecart/apparatus combination to avoid injuryfrom tip-over.An appliance and cart combination should be moved with care. Quick stop,excessive fore and uneven surfaces may cause the appliance and cartcombination to overturn.13. Unplug this apparatus during lightning storms or when unused forlong periods of time.To protect your product from a lightning storm, or when it is left unattended andunused for long periods of time, unplug it from the wall outlet and disconnectthe antenna or cable system. This will prevent damage to the product due tolightning and power-line surges.14. Refer all servicing to qualified service personnel. Servicing isrequired when the apparatus has been damaged in any way, such aspower-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed to rain orPortable Cart Warning4
moisture, does not operate normally, or has been dropped.15. Power sourceThis product should be operated only from the type of power source indicatedon the marking label. If you are not sure of the type of power supply to yourhome, consult your appliance dealer or local power company. For productsintended to operate from battery power, or other source, refer to the operationinstructions.16. Power linesAn outside antenna system should not be located in the vicinity of overheadpower lines or other electric light or power circuits, or where it can fall into suchpower lines or circuits. When installing an outside antenna system, extremecare should be taken to keep from touching such power lines or circuits ascontact with them might be fatal.17. OverloadingDo not overload wall outlets and extension cords as this can result in a risk offire or electric shock.18. Object and liquid entryNever push objects of any kind into the product through openings as they maytouch dangerous voltage points or short out parts that could result in fire orelectric shock. Never spill or spray any type of liquid on the product.19. Outdoor antenna groundingIf an outside antenna is connected to the product, be sure the antenna systemis grounded so as to provide some protection against voltage surges and builtup static charges. Section 810 of the National Electric Code ANSI/ NFPA 70provides information with respect to proper grounding of the mast andsupporting structure, grounding of the lead- in wire to an antenna dischargeproduct, size of grounding conductors, location of antenna- discharge product,connection to grounding electrodes and requirements for the groundingelectrodes.5
20. ServiceDo not attempt to service this product yourself as opening or removing coversmay expose you to dangerous voltage or other hazards. Refer all servicing toqualified service personnel.b)If liquid has been spilled or objects have fallen into the product.c)If the product has been exposed to rain or water.d)If the product does not operate normally by following the operatinginstructions. Adjust only those controls that are covered by the operatinginstructions, as an adjustment of other controls may result in damage and willrequire extensive work by a qualified technician to restore the product to itsnormal operation.e)If the product has been dropped or the cabinet has been damaged.f)When the product exhibits a distinct change in performance- this indicates aneed for service.25. Note to CATV system installerThis reminder is provided to call the CATV system installer' s attention toArticle 820- 40 of the NEC that provides guidelines for proper grounding and,in particular, specifies that the cable ground shall be connected to thegrounding system of the building, as close to the point of cable entry aspractical.NOTE: Refer all servicing to qualified service personnel. Servicing isrequired when the unit has been damaged in any way such as thefollowing: the power-supply cord or plug has been damaged, liquid hasbeen spilled into unit, the unit has been exposed to rain or moisture, theunit has been dropped or the unit does not operate normally.21. Replacement partsWhen replacement parts are required, be sure the service technician usesreplacement parts specified by the manufacturer or those that have the samecharacteristics as the original parts. Unauthorized substitutions may result infire or electric shock or other hazards.22. Safety checkUpon completion of any service or repairs to this product, ask the servicetechnician to perform safety checks to determine that the product is in properoperating condition.23. Wall or ceiling mountingThe product should be mounted to a wall or ceiling only as recommended bythe manufacturer.24. Damage requiring serviceUnplug this product from the wall outlet and refer service to qualified servicepersonnel under the following conditions.a)When the power- supply cord or plug is damaged.6
PRODUCT OVERVIEW17634 52TOP&FRONT VIEW SIDE VIEWBOTTOM VIEW1. Speaker2. LED Light Ring3. Power Button4. Aux In Jack5. LED Light On/Off Switch6. Micro USB Charging Port7. Strap Hole7
POWER SOURCE3.Connect the full sized USB Plug from the supplied USB Connection Cableto the USB Port on theComputer or USB Charger. (Computer and USB Charger NOT supplied).4.NOTES:Your battery will last longer if you're following these simple guidelines for caring and storing:A.Before first time use, charge it approximatelyhours until the unit is fullycharged.B.Recharge and store the unit within the temperature range of 5°C~35°C(40°F~95°F).C.Do not charge longer than 24 hours. Excessive charging or running theunit until battery fully drainswill damage battery. Battery life will be extended if you keep the battery fully charged.D.Battery life naturally shortens slowly over time.PCTo Micro USB PortUSB Connection CableMain unitTo USB Port on PC or USB ChargerDuring charging in power on mode, the LED Ring will be white and blink, after fully charged, it will be solid white. (NOTE: Charging in power off mode, the LED Ring will be solid white, after fully charged, it will turn off.)2-3NOTE: There is a built-in battery in this unit. The LED Light will blink quickly and an alarm will sound, indicating the battery is in low level and needs to be recharged.Do not dispose device in standard garbage disposal sites.Dispose of device at available Battery Recycling Sites after fully discharging battery.Not doing so may violate local disposal laws and regulations.Please refer to local regulations for proper battery disposal.The built-in rechargeable battery is not replaceable. Do not remove or replace it, do not throw in the trash or in a fire.2. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port at the rear of the unit.CAUTIONS:81. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.
BLUETOOTH OPERATION3. Activate the bluetooth function on your external device, and try searching, the pairing name will appear on the pairing name list.4. Select it and register in your player.6. Adjust the volume level by the connected external player and play music as usual.Note: The unit can be automatically connected with the last paired device after first time pairing when both of them are powered on and the Bluetooth is activated and in range.AUX IN OPERATION3. Connect one end of the AUX IN Cable to the AUX IN jack, the unit will send an indication sound4. Connect another end of the AUX IN Cable to the AUX OUT, Line Out or Headphone jack on the external player like Mobilephone, MP3 Player etc..5. After successful connection, the LED Ring will be solid white and it will send an indication sound.Do not plug in the AUX IN cable, or it will switch to AUX IN mode.5. Adjust the volume level by the connected external player and play music as usual.and the LED Ring will be solid white.91. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.2. Press and hold the Power button on the unit until the LED Ring lighting up and blinking to power on the unit.1. Uncover the rubber cover at the rear of the unit and slide the LED switch to left to turn on the LED Ring.2. Press and hold the Power button on the unit until the LED Ring lighting up and blinking to power on the unit.UO_TUNE_IN_006" "
Check the following before requesting service:SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONCan’t power on Built in battery drained Recharge the batteryVolume level of paired/connected deviceis in low levelRise the volume level of thepaired/connected deviceVolume level of the connected/paireddevice too highReduce the volume level of theconnected/paired deviceThe external BT device had NOT pairedto the unitPair the external BT device to theunitThe external BT device too far from theunitPlace the external BT deviceclose to the unitAudio power: 1 x 3W (RMS)BT Version: 4.1BT Operation Distance: ≧32 Feet in open areaNo sound or sound weakSound distortionBT notfunctioning1 x User's Manual1 x Micro USB Charging Cable with transparent clip 1 x Audio Connection Cable with transparent clipTROUBLESHOOTINGSPECIFICATIONSACCESSORIES:10LED Ring is off Built in battery drained Recharge the batteryDesign and specification are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.Made in China.and switch on the LEDBuilt-in battery: 3.7V, 1000mAhCharger: 5V,1ASame charging time for 1A or 2A charger 1. Under no battery condition, the charging time is around 2 hours and 45 minutes;2. Under 50% battery condition, the charging time is around 2 hours.
WARRANTYInnovative Technology Electronics LLC.Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage.Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address.Please include your check or money order in the amount of• USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)• USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)• USD $16.00 for items $100.00 and up (Price Paid Per Unit)• Shipping fees are non-refundableto be payable to Innovative Technology Electronics LLC. (for handling and returnshipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information.
WARRANTYSend all inquiries or RMA request via our website www.ithomeproducts.com/support.Innovative Technology Electronics LLC.1 Channel DrivePort Washington, NY 11050Toll free: 1-877-483-2497Website for support: www.ithomeproducts.com/support There are no express warranties except as listed above.REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVEREMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL ORCONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
Model / Modèle N.006_DMade in China / Fabriqué en ChineUrban Outfitters24 Market Place, 3rd FloorLondon W1W8AN UKwww.urbanoutfitters.comHEXAGON SPEAKER006_D

Navigation menu