Innovative Wireless Technologies FAP6210001 Handheld mesh radio for underground/hazardous environments User Manual CERTIFICATE OF COMPLIANCE
Innovative Wireless Technologies, Inc. Handheld mesh radio for underground/hazardous environments CERTIFICATE OF COMPLIANCE
User Manual
Rhein Tech Laboratories, Inc.
Client:
Innovative Wireless Technologies, Inc.
360 Herndon Parkway
Model #:
FAP6210-001
Suite 1400
Standards:
FCC 15.247 & IC RSS-210
Herndon, VA 20170
http://www.rheintech.com
ID’s:
SP8-FAP6210001/9568A-FAP6210001
Report #:
2011030
Page 35 of 39
Appendix J: Manual
Please refer to the following pages.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 1 of 17
IWT Miner Mesh Handset
Operator Manual
FAP6210-001
Innovative Wireless Technologies, Inc.
1047 Vista Park Drive, Suite A
Forest, VA 24551
Phone: (434)316-5230
Fax: (434)316-5232
www.iwtwireless.com
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 2 of 17
CONTENTS
1.0
PRODUCT OVERVIEW..............................................................................................................................3
2.0
SAFETY INFORMATION ..........................................................................................................................3
2.1
GENERAL DEVICE USAGE: ...................................................................................................................3
2.2
DEVICES USED IN UNDERGROUND COAL MINES:..........................................................................5
2.3
PROXIMITY TO BLASTING COMPONENTS:.......................................................................................5
3.0
SPECIFICATIONS FOR FAP6210-001......................................................................................................6
4.0
MMH HANDSET DESCRIPTION .............................................................................................................6
4.1
HANDSET CONTROLS:...........................................................................................................................7
4.2
HOME MENU DESCRIPTION: ................................................................................................................9
4.3
HANDSET ID ..........................................................................................................................................10
5.0
HANDSET OPERATION: .........................................................................................................................11
5.1
VOICE CALLS ........................................................................................................................................11
5.2
TEXT MESSAGES ..................................................................................................................................12
5.3
EMERGENCY BUTTON ........................................................................................................................16
6.0
HANDSET MAINTENANCE:...................................................................................................................17
7.0
WARRANTY INFORMATION: ...............................................................................................................17
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 3 of 17
1.0 PRODUCT OVERVIEW
Innovative Wireless Technologies’ Miner Mesh Handset (MMH) is a two way radio handset
designed primarily for use in industrial mining applications. The MMH is a portable device which
provides voice, data and tracking capabilities over an ad-hoc wireless communications network.
Some key features of the MMH:
• Supports simultaneous Voice/Data/Tracking
• High reliability communications in underground environments
• Supports talk around and fostering for extended network range
• High quality voice communications with minimal latency
• Automatic power adjustment for above and below ground use
• Intrinsically Safe when equipped with IS battery pack
(Mine Safety and Health Administration Approval No. TBD)
2.0 SAFETY INFORMATION
IMPORTANT INFORMATION ON SAFE OPERATION! READ THIS INFORMATION BEFORE
OPERATING THE MINER MESH HANDSET.
Changes or modifications to this unit not expressly approved by Innovative Wireless
Technologies, Inc. may void the user’s authority to operate this equipment.
Innovative Wireless Technologies, Inc.
1047 Vista Park Drive, Suite A
Forest, VA 24551
1-434-316-5230 (United States)
www.iwtwireless.com (United States)
2.1 GENERAL DEVICE USAGE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC ID: SP8-FAP6210001
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 4 of 17
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IC: 9568A-FAP6210001
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The following contains important safety information regarding specific absorption rate
(SAR) and RF exposure limits included in United States and international standards. Read the
information before operating your radio.
• This portable radio generates RF electromagnetic energy during transmit mode. This
device has been shown to be compliant for localized Specific Absorption Rate (SAR) for
controlled environment limits specified in ANSI/IEEE Std. C95.1-1992 and has been
tested in accordance with the measurement procedures specified in IEEE 1528-2003,
OET Bulletin 65 Supp. C, RSS-102 and Safety Code 6.
RF EXPOSURE GUIDELINES - CAUTION
To ensure that exposure to RF electromagnetic energy is within the FCC allowable limits for
general exposure, always adhere to the following guidelines:
• Do not operate the radio without a proper antenna attached, as this may damage the
radio and may also cause the FCC RF exposure limits to be exceeded. A proper
antenna is the antenna supplied with this radio by IWT (Antenna Factor: ANT-916-CW-
HD), or an antenna specifically authorized by IWT for use with this radio.
• Only use IWT authorized accessories (antennas, batteries, belt clips,
speaker/microphones, etc). Use of unauthorized accessories may cause the FCC
Occupational/Controlled Exposure RF compliance requirements to be exceeded.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 5 of 17
2.2 DEVICES USED IN UNDERGROUND COAL MINES:
This device has been evaluated by the Mine Safety and Health Administration (MSHA) per Title
30 Code of Federal Regulations Part 23.
MSHA Approval Number: TBD
Per MSHA’s evaluation, this product has been determined to be intrinsically safe under the
following conditions of use:
TBD
Never disassemble the handset, add or remove accessories, change or charge the battery,
while underground. Doing so may create an unsafe condition.
2.3 PROXIMITY TO BLASTING COMPONENTS:
The transmitted waveform characteristics are short duration (milliseconds/second) pulses, with
a power level of one (1) watt or less. For this reason the energy density is very low such that
the handset is classified as a low Power RF source as defined by the Institute of Makers of
Explosives, Safety Library Publication No. 20. Therefore, the Handset shall not be turned on
or operated within five (5) feet with respect to explosives or blasting components.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 6 of 17
3.0 SPECIFICATIONS FOR FAP6210-001
ENVIRONMENTAL
Operating Temperature -30C to +60C ambient
Storage Temperature -30C to +60C ambient
Dimensions (without Antenna) 5.5”x2.5”x1.5”
Weight (with Battery) 13.5oz
Enclosure IP67 (When assembled with antenna and
IS Battery pack.)
Alkaline Battery Pack
Voltage 5.8V – 9.0V
IS Battery Pack
Voltage TBD
ELECTRICAL
Frequency Range 902 – 928 MHz
Receiver Sensitivity
1
-100 dBm
RF Transmit Power – below ground +28 dBm
RF Transmit Power – above ground +13 dBm
RF input/output 50 ohms nominal (RP-SMA Connector)
Note 1: Conducted sensitivity measured at BER < 2%
4.0 MMH HANDSET DESCRIPTION
The Innovative Wireless Technologies’ Miner Mesh Handset (MMH) is a radio handset designed
specifically for use in mines and marketed exclusively to industrial mining operations to support
communications and tracking of personnel in and around mines. The handset is rated IP67 for
protection against entry of water and dust making it well suited for demanding underground
environments (when mated with the IS Battery Pack)
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 7 of 17
4.1 HANDSET CONTROLS:
Volume / Power (On/Off) Knob:
The Volume Knob is located on the top right of the handset. Rotating clockwise will first turn on
the handset and then increase the volume. Rotate counter clockwise to lower the volume and
turn off the handset.
Group Select Knob:
The group select knob is located on the top middle of the handset. The knob allows the
selection of 16 different groups for voice and text messages. See section 5.1 for more
information.
Emergency Button:
The emergency button is located on the top left of the handset. Pressing the emergency button
signals an emergency condition to the Mine Operation Center. See section 5.3 for more
information.
Clear Button:
The clear button is located on the upper left side of the handset. Pressing the clear button will
return you to the Home Menu from any sub menu. Pressing the clear button while in the home
menu will set the call destination to the currently selected group.
Push To Talk Button:
The push to talk button (PTT) is located on the middle left side of the handset. Press and hold
the PTT button will place a voice call to the current call destination.
Key Pad:
The keypad is located on the lower front of the handset. It is divided into two sections. The
lower section is an alpha numeric pad used for writing text messages and setting the call
destination for handset to handset calls. The upper portion is made up of four menu select
buttons. Pressing these buttons will activate the menu function located above them.
Microphone:
The microphone is located on the front left of the handset just above the display. When making
a voice call, make sure the microphone is level with your mouth.
Accessory connector:
The accessory connector is located on the right side of the handset and is used to connect
optional accessories such as a speaker microphone. Always make sure the connector is
covered when not in use. Use only IWT approved accessories. Using unapproved accessories
may result in a non-intrinsically safe condition, unauthorized RF emissions, and may void the
warranty. Do not install or remove accessories while below ground.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 8 of 17
Antenna
Group Select
Volume / Power
Push To Talk (PTT)
Keypad
Display
Accessory Connector
Emergency
Speaker
MMH Front View
Microphone
Clear
Figure 1
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 9 of 17
4.2 HOME MENU DESCRIPTION:
When the handset is first powered up the home menu will be displayed. The home menu
displays the status of the handset and allows you to access advanced functions. See figure 2.
The top of the display shows current status icons.
Volume:
The volume icon is only active when changing the volume using the volume knob. Additional
crescents indicate louder volume. The icon will become hidden a few seconds after the volume
adjustment is complete.
New Text Message:
The new text message icon is displayed when you have unread text messages. Reading or
deleting your messages will cause the icon to become hidden. See section 5.2 for more
information.
Talk Around:
The talk around icon is displayed when the current call destination is a talk around group. When
in talk around mode calls placed will only be received by handsets directly within range. Calls
will not be received by the network or more distant handsets.
Battery Level:
The battery level icon shows the remaining battery life. If the battery is too low the handset will
automatically shut down to protect the battery from damage.
Signal Strength:
The signal strength icon shows the strength of the current connection to the network. An ‘x’
indicates that the handset is not within range of the network. While within range of the network
up to 4 bars will be shown with more bars representing a stronger connection.
Emergency:
The emergency icon indicates that the handset has been placed in emergency mode using the
emergency button, or that an emergency voice call or text is currently being received.
Call Destination/Message Display:
The middle part of the display shows your current call destination. Pushing the PTT button will
place a call to the destination shown. The destination may be changed by using the group
select knob or choosing a different destination from the menu. See section 5.1 for more
information. This area is also used for displaying text messages.
Menu Display
The bottom of the display shows the menu. The home menu allows you to access additional
functions of the handset such as changing your call destination, sending and receiving text
messages and accessing the handset ID. These functions will be discussed in section 5.0.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 10 of 17
Call
Destination
Volume New Text
Message
Talk Around
Mode
Signal
Strength
Battery
Level
Home Menu
Menu
Figure 2
4.3 HANDSET ID
Each handset has a unique ID. This ID is used for tracking and to place calls and send text
messages to a specific handset. To show the ID of the handset press the Square () key,
labeled ‘Inf’ while in the home menu. The ID of the handset will be shown for a few seconds
before automatically returning to the home menu.
Information Menu
Figure 3
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 11 of 17
5.0 HANDSET OPERATION:
This section details the operation of the handset. The handset will automatically detect the
mesh network and adjust its frequency and power as directed by the network. The user can not
change any aspects of the RF operation of the handset. The user can place voice calls, send
and receive text messages and signal an emergency.
To turn the handset on, turn the volume knob clockwise. There will be resistance and an
audible click. Turning the volume knob further will increase the volume. Once the handset is
powered on it will take a few seconds to boot before showing the home menu. You may return
to the home menu at any time by pressing the clear button. From the home menu you may
place voice calls and access additional handset functions.
5.1 VOICE CALLS
Voice calls can be placed to your current group, a specific handset or the Mine Operation
Center (MOC). The current call destination is shown in the home menu. You may select a
different destination by using the Triangle (▲) (▼) keys on the keypad. To place a call simply
hold down the PTT button while speaking into the microphone.
Group calls
When the handset is first powered on the voice destination is set to the currently selected group
as indicated by the setting of the group select knob. You may change the destination group
using the group select knob. The 16 available groups are listed below.
Group Knob
Setting Group ID Call Type
1 Bcast Network Broadcast Call
2 Group1 Network Group Call
3 Group2 Network Group Call
4 Group3 Network Group Call
5 Group4 Network Group Call
6 Group5 Network Group Call
7 Group6 Network Group Call
8 Group7 Network Group Call
9 Group7T Talk Around Group Call
10 Group6T Talk Around Group Call
11 Group5T Talk Around Group Call
12 Group4T Talk Around Group Call
13 Group3T Talk Around Group Call
14 Group2T Talk Around Group Call
15 Group1T Talk Around Group Call
16 BcastT Talk Around Broadcast Call
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 12 of 17
There are two types of Group calls; Network and Talk Around. Network calls can be received
by any handset within range of the mesh network while Talk Around calls can only be received
by handsets within direct range of the caller. (Talk Around calls do not use or require the mesh
network). Group calls will only be heard by handsets that have selected the same group while
Broadcast calls will be heard by all handsets in range, regardless of which group is selected.
To place a group call, make sure that the group you wish to call is shown in the display and
press the PTT. If MOC or IDxxx is displayed you may change back into group mode by
pressing the Triangle (▲) (▼) key labeled ‘GRP’ or pressing the Clear Button. You may also
change the group using the group knob which automatically places the handset back into group
mode.
Individual Calls
Individual are ID specific calls placed to an specific individual handset. Other handsets will not
receive the call. A handset can receive Individual calls regardless of the group setting of the
destination handset. To place an Individual call, press the triangle (▲) (▼) key labeled ‘ID’.
‘IDxxx’ will appear on the screen. The ‘xxx’ is the ID of the last handset to which an individual
call was made. To change the call destination, use the number pad to enter the ID of the
handset you wish to call. If a mistake is made, you can use the Star (*) key to delete the last
character entered. Once the correct ID is displayed, press the PTT button to place the call. This
also sets the current ID as the new default ID until the handset is turned off.
When an Individual call is received, the handset will generate an alert tone and display the
handset ID. To respond, press PTT and speak into the microphone. If you do not respond
within several seconds, the handset will revert to displaying the selected group, effectively
ending the Individual call.
Mine Operations Center (MOC) Call
MOC calls are individual call, dedicated for communication with dispatch console in the mine
operations center. To place a MOC call select MOC by pressing the triangle (▲) (▼) key
labeled ‘MOC’. Press the PTT button to call the MOC.
5.2 TEXT MESSAGES
Text messages may be sent and received in a manner similar to cell phones. To access text
messaging press the Diamond () key from the home menu. The display will then change to
the text message menu. From here you may view your received text messages, send a text
message or clear all current text messages. If no selection is made within a few seconds the
display will return to the home menu.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 13 of 17
Text Message Menu
Figure 4
Viewing Text messages
If you have received a new text message an envelope icon will appear in the top of the display.
To view this text message press the Diamond () key labeled ‘Txt’. The display will change to
the Text Message display. Press the Diamond () key again to read your text messages.
Use the Triangle (▲) (▼) keys to scroll through messages that are longer than can be displayed
on the screen.
The Diamond () Key labeled ‘Next’ will advance to the next message. If there are no
additional messages the Diamond () key will be labeled ‘Bak’ and return you to the Home
Menu.
The Square () key labeled ‘Del’ will delete the current text message. When deleting a
message a confirmation menu will appear. Select yes or no using the Triangle (▲) (▼) keys.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 14 of 17
Text Message Viewing Menu
Figure 5
Sending Pre-Programmed Text Messages
The MMH has several standard text messaged pre-programmed. To send on of these
messages press the Diamond () Key labeled ‘Txt’ in the Home Menu. Next Press the Triangle
(▼) key labeled ‘Sel’. This will bring up a menu displaying pre-programmed messages. Use
the Triangle (▲) (▼) Keys to scroll through the messages. You may also use the number keys
to jump to a message. Once the message you wish to send is selected, press the Square ()
Key labeled ‘Ok’.
The text message is now shown in the middle of the display. If it is longer than can be
displayed on the screen, you can use the Triangle (▲) (▼) Keys to scroll through the message.
The message destination is shown at the top left of the display. By default, the destination is the
currently selected group.
You may change the destination group using the group knob. You may also send messages to
individual handsets or to the MOC by pressing the Square () Key labeled ‘To:’ and then
selecting the destination using the Triangle (▲) (▼) Keys.
To send a message to a specific handset press the Triangle (▲) (▼) Key labeled ‘ID’ and then
use the keypad to enter the ID of the handset you wish to text.
To send a message to the MOC press the Triangle (▲) (▼) Key labeled ‘MOC’.
Press the Diamond () Key labeled ‘Snd’ to send your message once you have selected the
correct destination.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 15 of 17
Pre-Programmed Message Menu
Figure 6
Text Message Destination Menu
Figure 7
Sending Custom Text Messages
The MMH can also send custom messages. To send a custom message press the Diamond
() Key labeled ‘Txt’ in the Home Menu. Next Press the Triangle (▼) key labeled ‘New’. This
will bring up a new display. The current destination is shown in the top left and the middle of the
display is blank. Use the keypad to enter the text you wish to send. Rapidly pressing a button
multiple times will rotate through the letters and numbers displayed on the key. When the letter
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 16 of 17
or number you wish to enter appears, quit pressing the button. After a second the cursor (thin
vertical bar in the display) will appear to the right character just entered indicating that you may
enter the next character. The Triangle (▲) (▼) Keys can be used to move the cursor left and
right. Press the (#) key to insert a space. Press the (#) key multiple times to rotate through
various punctuation and other symbols. Press the Star (*) key to delete the character to the left
of cursor.
You may change the destination in the same way as for a Pre-Programmed text message. Use
the Square () key to switch between selecting your destination and editing your text message.
Press the Diamond () Key labeled ‘Snd’ to send your message.
Text Message Editing Menu
Figure 8
5.3 EMERGENCY BUTTON
The emergency button is orange and located on the top of the handset near the
antenna. Pressing the emergency button for 3 seconds will place the handset
into emergency mode; this will trigger an immediate notification to be sent to
the MOC, plus the handset will vibrate and give an audible alert. For the
duration of emergency mode, an emergency icon appears in the top-right corner of the display.
Once in emergency mode, you may notify others by placing a call or sending a text message.
Completion of either action will also conclude emergency mode. Each handset user who
receives the call or text, based on normal destination rules, will receive an audible/tactile alert.
Unless you are placing a voice call or preparing to send a text message, emergency mode will
automatically end after 30 seconds.
Revised: 4/29/2011 6650-11-0014 R4
Approval: Page 17 of 17
6.0 HANDSET MAINTENANCE:
The handset is designed to require minimal maintenance from the user. If the handset is dirty,
use a 1” paint brush or similar brush to clean loose dust and debris from your handset before
wiping clean with a damp cloth taking care not to scratch the display. Do not use chemical or
abrasive cleaners as this may result in damage to the chassis.
If using the alkaline battery pack the alkaline batteries may be replaced by the user. To open
the battery pack, depress the orange tab and slide the battery cover off. Remove and replace
the six alkaline cells. Be sure to follow the diagram for the positive and negative terminals. Use
only standard 1.5V AA size alkaline cells. Slide the orange cover back onto the pack until the
catch clicks, locking it into place.
Never disassemble the handset or IS battery pack. Doing so will void your warranty. If your
handset or its battery pack is damaged do not use it.
7.0 WARRANTY INFORMATION:
TBD