Inovonics Wireless 3B6ABB Battery powered transmitter User Manual FA5230 draft

Inovonics Wireless Corporation Battery powered transmitter FA5230 draft

FA5230 user manual draft

DRAFT VERSION97789  2000 Inovonics Corporation.All rights reserved. Revised 4/25/00Adding a FA5230–Meter Pair to the SystemMaking the Hardware ConnectionEach water meter in the TapWatch system is paired with an FA5230 Pulse Meter Transmitter.The function of the FA5230 is to count reed switch closures from the meter magnet, digitize thiscount in an Inovonics formatted RF message and broadcast it at 900MHz.Figure 1a: FA5230 fits inside the meter housing…Figure 1b: FA5230 is not visible with meter installed.
DRAFT VERSION97789 Page 2 4/25/00Programming the FA5230—Meter Pair1. Confirm that the battery is installed in the FA5230.2. Go to the ‘Registered Meters’ tab of the Site Information editor.3. Click ‘Add’ on the ‘Registered Meters’ page making sure that the desired building is selectedin the drop-down box.4. Complete the ‘Add New Meter To...’ form when it appears.5. Click the ‘Register’ button.6. When prompted, press the reset button on the FA5230 being registered and wait forconfirmation that the FA5230–Meter pair has been logged to the system.7. Repeat steps 1-6 to add additional FA5230–Meter pairs to the system.Clicking the ‘Add’ button on the Registered Meters page initiates the software for adding aFA5230–Meter pair to the building that is selected in the drop-down box.For example, Figure 2 shows the screen that appears when the Add button is pressed.When all text boxes are filled properly, click ‘Register’ to enter the registration mode. A registrationbox then appears, prompting you to press the reset button on the transmitter.Once the transmitter’s reset message is received by the FA403 receiver, it is passed to the PC. TheFA5230–Meter pair is logged into the system and registration is complete.Figure 2: Add New MeterApartment # Five-character (or less)alphanumeric identifier forthe location of the FA5230—Meter pair.Initial MeterReadingThe number that appears onthe meter dial at registrationtime.Meter ID An alphanumeric identifier forthe meter (optional).Metering A drop-down box indicatingwhether the meter ismonitoring hot, cold, or allwater.

Navigation menu