Inrico Technologies B01 Bluetooth Microphone User Manual
Shenzhen Inrico Electronics Co.,Ltd Bluetooth Microphone Users Manual
User Manual
Bluetooth Microphone USER GUIDE Android/IOS 1. Description Bluetooth microphone is a kind of professional intercom equipment, by connecting APP of smart phone or network radio , providing truly secure link, easy pairing on the go, and instant push-to-talk. The Bluetooth microphone , as wireless accessory, is flexible and cost-effective that gives users more mobility in their critical communication. power indicator power/ play/pause PTT 2. Over views of the Bluetooth Microphone function indicator USB V+( Volume up/ Group switch page up ) MIC speaker V-( Volume down/ Group switch page down ) SOS Button earphone jack group switch desktop charger interface 3.Specification Bluetooth version BT4.2 Turn on Press and hold for 3 sec. Bluetooth protocol HFP;HSP;A2DP;AVRCP;SPP Turn off Press and hold for 3 sec. Transmission range >10m Answer the call Single click Music >12hrs in maximum volume Talking time ≈14hrs PTT time ≈14hrs Standby time >90hrs Working temperature -10~50℃ Storage temperature -25~60℃ Earphone jack 3.5mm,PTT supportive Batter y 2000mA/3.7V Charging time 2.5h ON/OFF PTT Encr yption Single click Decline Double click Push to Talk Push to Talk Release to End Release to End Encr yption Type To receive APP command when radio is on 5.LED indicator Description Power indicator 4.Button function Button Hang up the call (red light) Description Power indicator Power on Green light on for 3 seconds then off Green light on for 3 seconds then off (green light) Description Operation Power on Red light on for 3 seconds then off Power off Red light on for 3 seconds then off Power off Under charging Red light on Bluetooth match Fast-blink PTT calling Red light on PTT called green light on SOS Press and hold for 2 sec. Group switch page up Single click V+ Group switch page down Single click V- V+ Volume up Single click Low battery Fast-blink Full charged green light on V- Volume down Single click SOS green light on Group Switch green light on SOS button group switch (valid in 30 sec.) 6.Operation Answer the call Press Power button to answer phone when Bluetooth microphone has been activated. Decline Double click Power button to decline when there is call in. Hang up the call Single click power button to hang up the call. Mp3 play and pause Single click power button to play or pause MP3 music when connected. Standby Auto hibernation starts in 15min. When Bluetooth microphone has not activated. PTT function Bluetooth microphone supports PTT software such as Zello , Total control and etc. PTT button can be used when it is activated. Group switch Single click group switch button with green light on and Single click V+/V- to switch group when Bluetooth microphone is activated for PTT software. End group switch by pressing PTT button. SOS Press SOS button and hold for 2S when Bluetooth microphone is activated for PTT software. PTT starts after red light turns on and alarm goes off. It lasts for 20s. Firmware upgrade For Bluetooth microphone firmware upgrade, TF card and download box are necessary. Corresponding software must be installed to burn the firmware to TF card. Please connect download box and Bluetooth microphone with USB cable. Press and hold the reset button (under the battery after opening the rear cover) . Release reset button after the download box starts up. Successful download will be prompted in 10s. 7.FAQ Failed to power on. It is probably low batter y. Please charge for 2-3hrs. No voice Please check if volume sets too low. Please set the switch properly. Echo with speaker Speaker is too close to MIC. Please relocate the speaker. Disconnected with mobile phone. Low battery. Distance between Bluetooth microphone and mobile phone is over 10m. Shielding obstacle interferes. Failed to match with mobile phone. Clean up all matching information according to user guide. The Bluetooth microphone and the phone should be placed less than 1m and re-start the match. System halted It may caused by high-strength radio frequency interference, such as GSM base station, airport radar and a high power TV transmission tower. Please reset and restart after leaving the interference source. Abnormal working indicator A. Overuse or long period of non-use may cause low battery. It need to be charged for an hour and unplug and recharge. B. Change a charging cable or charger. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Miss Create Date : 2018:11:14 17:30:52+08:00 Modify Date : 2018:11:14 17:31:36+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2018:11:14 17:31:36+08:00 Creator Tool : CorelDRAW Format : application/pdf Title : B01说明书阅读版 Creator : Miss Document ID : uuid:4d124064-4764-44ca-ac9c-732cb950b2dd Instance ID : uuid:832fac27-46e6-4f4e-b82e-cb6a6a334117 Producer : Corel PDF Engine Version 14.0.0.701 Page Count : 2EXIF Metadata provided by EXIF.tools