Inrico Technologies T199 Smart Phone User Manual T198
Shenzhen Inrico Electronics Co.,Ltd Smart Phone T198
Contents
- 1. Users Manual
- 2. User Manual
User Manual
![](/img.php?id=3245419&img=bg1.png)
![](/img.php?id=3245419&img=bg2.png)
![](/img.php?id=3245419&img=bg3.png)
GSM850/PCS1900/WCDMA Band II/WCDMA Band V
![](/img.php?id=3245419&img=bg4.png)
This device is not radio circuit of traditional walkie talkie or mobile
phone. It uses 2G/3G network to transmit data (i.e. audio file). When
in use, equipment suppliers will built local network according to the
customer actual usage scenarios. Users push the button to record
voice, the audio file will be sent to other match device in the form of
data. This function is similar as software function such as WeChat or
Facebook Messenger.
User depress button of the device to record user's voice. After the
user release its button to finish recording user's voice, the voice
become audio file and sending the file to another user thru
connection of GPRS/EDGE/WCDMA network.
T199 has no ear loudspeaker and does not support the GSM dial
and call function. It only supports GPRS/EDGE/WCDMA network
function. It has no display. It could not be installed Skype or other
network software. The device does not have any instant verbal
talking and does not have any verbal dialing function thru
connection of network.
There is not any voice communication or FM transmitter on the
device.
T199 is Push-to-Talk radios. It need to be tested with Held-To-face
position and no need for Head SAR testing.
According to KDB 643646 A2, all sides of the radio that may be
positioned facing the user when using a body-worn accessory must
be considered for SAR compliance.
When user operates the product using a body-worn accessory,
users only operates the front and rear sides of the product and face
the user. The product is fixed to the waist, through a microphone
and a headset to communication. It is because this is face-to-talk
product. Thus, we only tested the front and rear sides of body-worn
positions of the product. The other four sides of body-worn
positions (top, bottom, left and right) were not tested. Therefore,
the product complies with SAR requirement.
18 19
1
Federal Communications Commission (FCC)
Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
![](/img.php?id=3245419&img=bg6.png)
2
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Note: Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
This mobile device meets guidelines for exposure to
radio waves. Your mobile device is a radio
transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended
![](/img.php?id=3245419&img=bg7.png)
3
by international guidelines.
The SAR limit adopted by USA and Canada is 1.6
watts/kilogram (W/kg) averaged over one gram of
tissue. The highest SAR value reported to the
Federal Communications
Commission (FCC) and the Industry Canada (IC) for
this device type when it is tested for use at the body
is 1.086 W/kg.
The device complies with the RF specifications when
the device is used at a distance of 1.0 cm from your
body. Ensure that the device accessories such as a
device case and a device holster are not composed
of metal components. Keep your device 1.0 cm away
from your body to meet the requirement earlier
mentioned.