Inseego NVWCC760 Cellular/ PCS CDMA PCI Express Mini Card User Manual Sprint 7B

Novatel Wireless Inc Cellular/ PCS CDMA PCI Express Mini Card Sprint 7B

UserManual.wiki >

NVWCC760 User Manual

Users Manual

Table of ContentsYour Merlin C777 Device . . . . . . . . . . . . . . . . . . . . . iHow to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . iSection 1: Introducing the Merlin C777 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11A. Introducing the Merlin C777 Device . . . . . . . 2Your Merlin C777 Device . . . . . . . . . . . . . . . . . . . . . . . 2Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 3Section 2: Setting Up and Using the Merlin C777 Device . . . . . . . . . . . . . . . . . . . . . . . . . . 52A. Setting Up Your Sprint Account . . . . . . . . . . . 6Setting Up Your Device On Your Sprint Account . . . 62B. Installing the Software and Activating Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Inserting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Installing the Drivers and Software on a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Installing the Drivers and Software on a Mac Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Activating Your Merlin C777 Device . . . . . . . . . . . . 122C. Using Your Merlin C777 Device . . . . . . . . . 13Starting the Software . . . . . . . . . . . . . . . . . . . . . . . . . 13Viewing the User Guide . . . . . . . . . . . . . . . . . . . . . . . 14Removing the Device . . . . . . . . . . . . . . . . . . . . . . . . . 14Using the Removable PC Card Adapter . . . . . . . . . 14External Antenna Connector . . . . . . . . . . . . . . . . . . . 15Contacting Sprint Customer Service . . . . . . . . . . . . 16Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Section 3: Technical Specifications, Regulatory and Safety Information, and Warranty . . . . . . . . 193A. Technical Specifications . . . . . . . . . . . . . . . . 20LED Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . 22Mechanical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 22Software Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Transmitter Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 23Receiver Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Hardware Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3B. Regulatory Information . . . . . . . . . . . . . . . . . 26Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . 29Additional Information and Updates . . . . . . . . . . . . . 303C. Important Safety Information . . . . . . . . . . . . 31Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Safety and Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . 313D. Novatel Wireless Limited Warranty and Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

iYour Merlin C777 DeviceThank you for purchasing a Novatel Wireless Merlin C777 device. This device offers more freedom than ever before. No wires, no cables—just access to your data when you need it. The power of the Internet is truly at your fingertips.How to Use This GuideThe advantages of Sprint are as clear as each wireless connection you make. With Sprint service, we give you what you really want from a wireless service provider—clear connections, easy-to-understand service plans, and self-servicing options for managing your account. All this is designed to make your life easier and worry-free.We know you’re eager to start using your device right away, and the sections of this guide are designed to help you do just that.The first section (page 1) gives an overview of the device package contents.The second section (page 5) guides you through the steps required to install your device and the Windows or Mac software, and describes how to start the software once it is installed.The third section (page 19) lists technical specifications, and regulatory, safety, and warranty information for your device.

iiGetting More Information About the Device and ServiceThis guide describes how to install and start the software. To learn how to use all the features of your device and software, consult the user guide (see page 14 of this document) or online help.

Section 1Introducing the Merlin C777 Device

2 Section 1A. Introducing the Merlin C777Section 1AIntroducing the Merlin C777 DeviceࡗYour Merlin C777 Device (page 2)ࡗPackage Contents (page 2)ࡗCare and Maintenance (page 3)This section introduces your Merlin C777 device.Your Merlin C777 DeviceThe Novatel Wireless Merlin C777 device is a dual-band wireless card. It enhances the functionality of your mobile computing devices by adding wireless connectivity to the Internet.Your device fits into a PC Card or ExpressCard® slot (available on most notebook and some desktop computers).Package ContentsYour Merlin C777 device package contains the following components:ⅷSprint Mobile Broadband 2-in-1 Card Merlin C777ⅷGet Started guide (this document)

IntroductionSection 1A. Introducing the Merlin C777 3Care and MaintenanceAs with any electronic device, the Merlin C777 device must be handled with care to ensure reliable operation. Follow these guidelines in using and storing the device:ⅷThe device should fit easily into an available PC Card or ExpressCard slot (by removing the integrated adapter). Forcing the device into a slot may damage the connector pins.ⅷProtect the device from liquids, dust, and excessive heat.ⅷWhen not installed in your computer, store the device in a safe place.ⅷRemove the device before storing or transporting your computer.ⅷWhen inserting or removing the device, always grip it by the sides rather than the end, as this prevents damage to the device’s antenna and connector.ⅷDo not handle or operate the device while driving or operating a vehicle. Doing so may distract you from properly operating the vehicle. In some jurisdictions, operating communication devices while in control of a vehicle is a criminal offense.

Section 2Setting Up and Using theMerlin C777 Device

6 Section 2A. Setting Up Your Sprint AccountSection 2ASetting Up Your Sprint AccountࡗSetting Up Your Device On Your Sprint Account (page 6)Setting Up Your Device On Your Sprint AccountNormally your device will be set up on your Sprint account at the time of purchase.To verify that your device is set up on your Sprint account:1. Log on to your account at www.sprint.com by entering your username and password.2. Confirm that the Merlin C777 device is on your account with a Mobile Broadband connection plan.If you don’t see your device listed, you will need to contact Sprint Customer Service to complete setting up the device on your account. Have the following available before calling:ⅷYour Sprint account information.ⅷThe ESN number of your device (displayed on the back of the device and on the packaging).

Installing the SoftwareSection 2B. Installing the Software and Activating Your Device 7Section 2BInstalling the Software and Activating Your DeviceࡗInserting the Device (page 7)ࡗInstalling the Drivers and Software on a Windows Computer (page 9)ࡗInstalling the Drivers and Software on a Mac Computer (page 10)ࡗActivating Your Merlin C777 Device (page 12)The installation process has two stages:ⅷInstalling the Drivers and Software — Install the device drivers and Sprint SmartView software (for Windows, see page 9; for Mac, see page 10).ⅷActivating the Device — Sprint’s hands-free activation feature will automatically begin activating your device on the network (page 12).Inserting the DeviceYour device may be used in computers equipped with a Type II PCMCIA (PC Card) slot or an ExpressCard slot.Inserting the Device into a PC Card SlotTo use the device in a Type II PCMCIA (PC Card) slot, use the integrated adapter as follows. ᮣInsert the device, with the integrated adapter attached, into your computer’s PC Card slot, Sprint label facing up. (Do not forcefully insert the device, as this may damage it.)Note For information on using the Merlin C777 device with Linux, please see www.sprint.com/downloads.

8 Section 2B. Installing the Software and Activating Your DeviceInserting the Device into an ExpressCard SlotTo use the device in an ExpressCard slot, you must remove the integrated adapter as follows.1. Locate the locking mechanism on the bottom of the adapter.2. Push the lock slightly out.3. Pull the device out of the adapter.4. Insert the device into your computer’s ExpressCard slot, Sprint label facing up. (Do not forcefully insert the device, as this may damage it.)

Installing the SoftwareSection 2B. Installing the Software and Activating Your Device 9Installing the Drivers and Software on a Windows ComputerSystem RequirementsThe Merlin C777 device is supported on:ⅷWindows VistaⅷWindows XP with Service Pack 2 or laterⅷWindows 2000 with Service Pack 4 Installing the Drivers and SoftwareThe device drivers and Sprint SmartView software for this device automatically install once the device is inserted into the computer.Your device is designed for quick and effortless installation and configuration. No CD is required for installation. Simply insert the device, allow the drivers and software to load, select automatic activation, and connect to the Sprint Mobile Broadband Network right away!1. Ensure you are in the Sprint Mobile Broadband coverage area (not roaming).2. Insert the device into your computer’s PC Card or ExpressCard slot. (See pages 7 and 8 for instructions on proper use of the device and the removable adapter.)3. The first time you insert the device into your computer, the drivers install. Wait a few moments while your computer automatically installs the necessary drivers for your device. A series of “Found New Hardware” messages may appear.Note Windows Vista and Windows 2000 users: You must log in with administrative privileges to install the software and drivers.Windows XP users: You may need to log in with administrative privileges, depending on your Windows configuration.As part of the installation process you may need to restart your computer; save any open documents.

10 Section 2B. Installing the Software and Activating Your Device4. Once the drivers have automatically installed, a Welcome window appears. Click Continue.5. Once the InstallShield window appears, click Next.6. Read the Software License Agreement. Click Next to accept the terms in the License Agreement.7. In the “Installation Customization Wizard” window, select a skin and then click Next. (A series of dialog boxes guides you through the installation. 8. Install the software in the default destination folder (recommended), or click Change to install into a different folder. Click Next.9. Click Install to begin the installation. This may take a few minutes.10. Once installation is complete, the Sprint SmartView desktop icon appears on your desktop and you may be prompted to restart your computer in order for the new settings to take effect. Click Yes and Finish to exit the Installation Wizard.11. Proceed to “Activating Your Merlin C777 Device” on page 12.Installing the Drivers and Software on a Mac ComputerSystem RequirementsThe C777 device is supported on Mac OS® X, version 10.4 or higher.To check your version, from the Apple menu ( ) choose About This Mac. If your version is earlier, then:ᮣVisit www.apple.com/downloads/macosx/apple for upgrading instructions.– or –1. In Finder™, select Applications > System Preferences.2. Double-click the System Preferences icon.3. Double-click Software Update.4. Click Check Now.

Installing the SoftwareSection 2B. Installing the Software and Activating Your Device 11Installing the Drivers and Software1. Ensure you are in the Sprint Mobile Broadband coverage area (not roaming).2. If your computer has an AirPort®, AirPort Extreme®, AirPort Express®, or Bluetooth adapter, turn it off. (For instructions, see your computer’s user guide.)3. Insert the device into your computer’s ExpressCard slot. (See pages 7 and 8 for instructions on proper use of the device and the removable adapter.)4. Once the drivers have automatically installed, a Welcome window appears. Click Continue.5. Once the InstallShield window appears, click Next.6. Read the Software License Agreement. Click Next to accept the terms in the License Agreement.7. In the “Installation Customization Wizard” window, select a skin and then click Next. (A series of dialog boxes guides you through the installation.8. Install the software in the default destination folder (recommended), or click Change to install into a different folder. Click Next.9. Click Install to begin the installation. This may take a few minutes.10. Once installation is complete, the Sprint SmartView desktop icon appears on your desktop and you may be prompted to restart your computer in order for the new settings to take effect. Click Yes and Finish to exit the Installation Wizard.11. Proceed to “Activating Your Merlin C777 Device” on page 12.Note As part of the installation process you will be prompted to restart your computer; save any open documents first.Note The Sprint SmartView software can also be downloaded from www.sprint.com/downloads.

12 Section 2B. Installing the Software and Activating Your DeviceActivating Your Merlin C777 DeviceAfter you have successfully installed Sprint SmartView and while your device is connected to your computer, Sprint SmartView will inform you that hands-free activation has started and will periodically give you updates about activation status. No intervention is required on your part.If activation is successful, Sprint SmartView will display “Hands Free Activation Complete,” after which you are ready to connect to the network.

Using Your DeviceSection 2C. Using Your Merlin C777 Device 13Section 2CUsing Your Merlin C777 DeviceࡗStarting the Software (page 13)ࡗViewing the User Guide (page 14)ࡗRemoving the Device (page 14)ࡗUsing the Removable PC Card Adapter (page 14)ࡗExternal Antenna Connector (page 15)ࡗContacting Sprint Customer Service (page 16)ࡗTroubleshooting (page 16)Starting the Software1. Double-click the program’s icon ( ) on your desktop.– or –ⅢWindows: Select Start > All Programs > Sprint > Sprint SmartView.ⅢMac: In Finder, select Applications > Sprint SmartView, and then double-click Sprint SmartView.2. Sprint SmartView launches and the “Ready: Sprint Mobile Broadband” dialog appears.

14 Section 2C. Using Your Merlin C777 DeviceViewing the User GuideThe user guide provides detailed information on the Windows and Mac versions of the Sprint SmartView software.ᮣIn Windows, select Start > All Programs > Sprint > SmartView > User Guide.– or –Mac, in Finder, select Applications > Sprint SmartView > SmartView_User_Guide.pdf.Removing the Device1. Exit the Sprint SmartView software if it is open.2. If your computer has a PC Card or ExpressCard ejector, use it to eject the device from the slot.3. Remove the device from your computer’s PC Card or ExpressCard slot by gripping both sides of the device and pulling straight out.Using the Removable PC Card AdapterFor instructions on inserting the device into either a PC Card or an ExpressCard slot, see “Inserting the Device” on page 7.WARNING When inserting or removing your device, always grip it by its sides, as this prevents damage to the device.

Using Your DeviceSection 2C. Using Your Merlin C777 Device 15External Antenna ConnectorThis Sprint Mobile Broadband device is equipped with an external antenna connector.To access the external antenna connectorᮣGently flip open the unlabeled rubber tab on the side of the device.This device is only authorized for use in laptop computers that are identical or substantially similar to those in its grant application. At least 8 inches (20 centimeters) of separation between the device with an attached external antenna and the user’s body must be maintained at all times. In order to comply with FCC/IC regulations limiting both maximum RF output power, and human exposure to RF radiation, the maximum antenna gain must not exceed 6dBi in the Cellular or PCS bands of operation. If this device is intended for use in a portable device, you (the user) are responsible for separate approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102/Safety Code 6.Note Your device does not come with an external antenna.Note The rubber tab is removable. If removed, place the tab in a secure location for future use.

16 Section 2C. Using Your Merlin C777 DeviceContacting Sprint Customer ServiceYou can reach Sprint Customer Service by:ⅷLogging on to your account at www.sprint.com.ⅷCalling us toll-free at 1-888-211-4727 (personal use) or 1-800-927-2199 (business use).ⅷWriting to us at Sprint Customer Service, P.O. Box 8077, London, KY 40742.TroubleshootingFor a more complete listing of errors and possible solutions, please see the user guide or online Help. You may also visit www.sprint.com/support to find up-to-date FAQs, Troubleshooting Guide and User Guides specific to this device.Problem/error SolutionThe device has no power.(The LED indicator is off.) Ensure the following:ⅷThe device is properly inserted.ⅷThe computer is turned on and not in suspend mode (Windows) or sleep mode (Mac).

Using Your DeviceSection 2C. Using Your Merlin C777 Device 17No service is available.(The LED indicator is red.) Try the following:ⅷReorient your computer.ⅷIf you are inside a building or near a structure that may be blocking the signal, change the position or location of your computer.ⅷCheck with Sprint — a network or account problem may be preventing the device from obtaining service.Problem/error Solution

Section 3Technical Specifications,Regulatory and SafetyInformation, and Warranty

20 Section 3A. Technical SpecificationsSection 3ATechnical Specifications ࡗLED Overview (page 20)ࡗEnvironmental Specifications (page 22)ࡗMechanical Specifications (page 22)ࡗSoftware Specifications (page 23)ࡗTransmitter Specifications (page 23)ࡗReceiver Specifications (page 24)ࡗHardware Specifications (page 24)ࡗMiscellaneous (page 25)This section describes the LED indicators and various specifications of your Merlin C777 device.LED OverviewYour device has an LED light that operates as follows:LED Status IndicatesOff (no light) The device has no power. The device may not be completely inserted into the computer.

SpecificationsSection 3A. Technical Specifications 21Red No service is available. If this state persists, try the following:ⅷTry reorienting your computer.ⅷIf you are inside a building or near a structure that may be blocking the signal, change the position or location of your computer.ⅷCheck with Sprint — a network or account problem may be preventing the device from obtaining service.Amber Error; reset device.LED Status IndicatesGreen (solid) The device is powered but is not transmitting or receiving data.Green (blinking slowly) The device is powered and is searching for the network.Green (intermittent blinking) The device is powered, connected, and is sending or receiving data.Blue The device is roaming.LED Status Indicates

22 Section 3A. Technical SpecificationsEnvironmental Specifications Mechanical SpecificationsOperating temperature 0° C to 55° C(32° F to 131° F)Storage temperature -20° C to 65° C(-4° F to 149° F)Humidity 5% to 90% within operating temperatureVibration stability 5 Hz to 500 Hz, 0.1 octave/secondDrop 1 meter drop, no damage – fully operationalDimensions (W x D x H) 120 mm x 54 mm x 19 mmWeight 47 g/1.65 ozBattery pack N/ALED YesAntenna Internal

SpecificationsSection 3A. Technical Specifications 23Software Specifications Transmitter SpecificationsCDMA specification EVDO Rev AData service SupportedSMS (IS-637) Currently not supportedIOTA SupportedOTAPA (IS-683A) SupportedPRL (preferred roaming list) SupportedAuthentication SupportedNAM 1Mobile IP SupportedType of multiplexing EVDO and 1xRTTNormal output power 7-10 dBmTX Max power 24.8 dBmFrequency range 1850 MHz to 1919 MHzFrequency stability Compliant with CDG1Bandwidth 1.25 MHzOccupied bandwidth 1.25 MHzModulation method O-QPSK/HPSKWaveform quality .944

24 Section 3A. Technical SpecificationsReceiver Specifications Hardware SpecificationsConducted spurious emission Complies with Title 47, Part 24 of the FCC RulesCommon RF impedance 50 ohmsType of receiving EVDO and 1xRTTFrequency range 1930 MHz to 1990 MHzBandwidth 1.25 MHzOccupied bandwidth 1.25 MHzModulation method O-QPSK/HPSKReceiver sensitivity -104 dBmInter-modulation spurious response attenuationComplies with CDG stage 1Common RF impedance 50 ohmsInterface type PCMCIA and ExpressCardCommon air interface 1xEVDO Rev AChannel spacing 50 kHzChipset QUALCOMMTM QSC6085Transmitting (max. data rate) Forward link: 3.1 MbpsReverse link: 1.8 Mbps

SpecificationsSection 3A. Technical Specifications 25MiscellaneousSupply voltage 500 mABattery N/ACharger (charging time) N/ACommunication ports PCMCIA and ExpressCardVoice capability Not supportedGPS capability SupportedCertification and approval FCC (parts 2, 22, & 24, SAR), UL, CDG, etc.

26 Section 3B. Regulatory InformationSection 3BRegulatory InformationࡗRegulatory Notices (page 26)ࡗTrademarks (page 29)ࡗCopyright (page 29)ࡗLimitation of Liability (page 29)ࡗAdditional Information and Updates (page 30)This section contains important regulatory notices about your Merlin C777 device, and also patent and other information. Regulatory NoticesThis device is designed to be activated on the Sprint network and has a software programming lock that, in part, protects many of the device's features and functions against tampering and unauthorized reprogramming. This device will work with Sprint services—service plans and other services/options must be purchased separately. Operates within the Sprint CDMA frequency band of 800 MHz/1.9 GHz. This device will not operate on any iDEN network. Coverage is not available everywhere. Product meets current FCC Radio Frequency Emission Exposure Guidelines. FCC Equipment Authorization ID number: PKRNVWCC760.Federal Communications Commission Notice (FCC – United States)Electronic devices, including computers and wireless modems, generate RF energy incidental to their intended function and are therefore subject to FCC rules and regulations.

Regulatory InformationSection 3B. Regulatory Information 27This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates radio frequency energy and is designed for use in accordance with the manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:ⅷReorient or relocate the receiving antenna.ⅷIncrease the separation between the equipment and the receiver.ⅷConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.ⅷConsult the dealer or an experienced radio/television technician for help.This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION MAY VOID THE WARRANTY. THE MERLIN C777 DEVICE IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR TUNING IS REQUIRED. CONTACT SPRINT TECHNICAL SUPPORT FOR INFORMATION ABOUT SERVICING YOUR WIRELESS COMMUNICATION DEVICE.FCC CAUTION: Any changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.MODIFICATIONS: The FCC requires that you be notified that any changes or modifications made to this device that are not expressly approved by Sprint may void your authority to operate the equipment.

28 Section 3B. Regulatory InformationRF Exposure/Specific Absorption Rate (SAR) InformationThis product has been evaluated for SAR and meets the FCC Guidelines for exposure to radio waves.FCC Equipment Authorization ID: PKRNVWCC760Your wireless modem is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless devices including mobile cards and wireless modems uses a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using standard operating positions reviewed by the FCC with the device under test transmitting at its highest certified power level in all frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before this device is made available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear or worn on the body) as required by the FCC for each model. THE FCC HAS GRANTED AN EQUIPMENT AUTHORIZATION FOR THIS WIRELESS MODEM WITH ALL REPORTED SAR LEVELS EVALUATED AS IN COMPLIANCE WITH THE FCC RF EXPOSURE GUIDELINES. THE HIGHEST SAR VALUE FOR THIS MODEM WHEN TESTED FOR COMPLIANCE AGAINST FCC STANDARDS WAS 1.179 W/KG USER-LAP POSITION.

30 Section 3B. Regulatory InformationAdditional Information and UpdatesFor up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases, visit www.sprint.com.

Regulatory InformationSection 3B. Regulatory Information 31

Important Safety InformationSection 3C. Important Safety Information 31Section 3CImportant Safety InformationࡗImportant Notice (page 31)ࡗSafety and Hazards (page 31)Important NoticeBecause of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors), or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Merlin C777 device are used in a normal manner with a well constructed network, they should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. SPRINT SPECTRUM L.P. accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Merlin C777 device or for failure of the Merlin C777 device to transmit or receive such data.Safety and HazardsDo not operate the Merlin C777 device in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Merlin C777 device MUST BE POWERED OFF. It can transmit signals that could interfere with this equipment.Do not operate the Merlin C777 device in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Merlin C777 device MUST BE POWERED OFF. When operating, it can transmit signals that could interfere with various onboard systems.The driver or operator of any vehicle should not operate the Merlin C777 device while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some jurisdictions, operating such communications devices while in control of a vehicle is an offense.

Important Safety InformationSection 3C. Important Safety Information 32

32 Section 3D. Novatel Wireless Limited Warranty and LiabilitySection 3DNovatel Wireless Limited Warranty and LiabilityNovatel Wireless warrants for the 12 month period immediately following receipt of the Product by Purchaser that the Product will be free from defects in material and workmanship under normal use. THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.The exclusive remedy for a claim under this warranty shall be limited to the repair or replacement, at Novatel Wireless’ option, of defective or non-conforming materials, parts or components. The foregoing warranties do not extend to (I) non conformities, defects or errors in the Products due to accident, abuse, misuse or negligent use of the Products or use in other than a normal and customary manner, environmental conditions not conforming to Novatel Wireless’ specification, of failure to follow prescribed installation, operating and maintenance procedures, (II) defects, errors or nonconformity’s in the Product due to modifications, alterations, additions or changes not made in accordance with Novatel Wireless’ specifications or authorized by Novatel Wireless, (III) normal wear and tear, (IV) damage caused by force of nature or act of any third person, (V) shipping damage, (VI) service or repair of Product by the purchaser without prior written consent from Novatel Wireless’ (VII) products designated by Novatel Wireless as beta site test samples, experimental, developmental, reproduction, sample, incomplete or out of specification Products, or (VIII) returned products if the original identification marks have been removed or altered.

Navigation menu