Inseego NVWSA1100 Wireless Communicator User Manual SA 2100 User Guide

Novatel Wireless Inc Wireless Communicator SA 2100 User Guide

Contents

User Manual

SA1100UG001SA 1100User GuideVersion: 1.03 17 September, 2014
i novatelwireless.comGeneralTERMS OF USE OF NEW MATERIALS - PLEASE READ CAREFULLYFrom time to time, Novatel Wireless, in its sole discretion, may make available for download on its website(www.novatelwireless.com), or may transmit via mail or email, updates or upgrades to, or new releases of, thefirmware, software or documentation for its products (collectively, 'New Materials'). Use of such New Materials issubject to the terms and conditions set forth below, and may be subject to additional terms and conditions as setforth in Novatel Wireless's Technical Support Policy (posted on its website) and/or any written agreementbetween the user and Novatel Wireless.All New Materials are provided AS IS. Novatel Wireless makes no warranty or representation with respect to themerchantability, suitability, functionality, accuracy or completeness of any such New Materials. The user of suchNew Materials assumes all risk (known or unknown) of such use. Novatel Wireless reserves all rights in such NewMaterials. The user shall have only a revocable and limited license to use such New Materials in connection withthe products for which they are intended. Distribution or modification of any New Materials without NovatelWireless's consent is strictly prohibited.IN NO EVENT WILL NOVATELWIRELESS BE RESPONSIBLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL ORSPECIAL DAMAGES AS A RESULT OF THE USE OF ANY NEW MATERIALS. NOVATELWIRELESS'S MAXIMUMLIABILITY FOR ANY CLAIM BASED ON THE NEW MATERIALS SHALL NOT EXCEED FIFTY U.S. DOLLARS ($50).Version VerificationPlease ensure you have the latest version of this document by downloading it from www.novatelwireless.com
ii novatelwireless.comCopyright© 2014 Novatel Wireless. All rights reserved. Complying with all applicable copyright laws is the responsibility ofthe user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in orintroduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical,photocopying, recording or otherwise), or for any purpose, without the express written permission of NovatelWireless.Novatel Wireless and the Novatel Wireless logo are either registered trademarks or trademarks of NovatelWireless, Inc. in the United States.251 Renner Pkwy, Suite 200Richardson, TX 75080 USAPhone: (972) 633-4400Fax: (972) 633-4444Email: info@nvtl.comwww.novatelwireless.com
iii novatelwireless.comWarranty InformationThis warranty applies to (a) products sold directly by Novatel Wireless, unless a different warranty is specified in awritten agreement between Novatel Wireless and the purchaser; and (b) products sold to end users through adistributor authorized by Novatel Wireless, but only where the authorized distributor does not provide a separatewarranty on such products, and Novatel Wireless has agreed to provide this warranty to such end users. If youpurchased the product from an authorized distributor, please check whether this warranty from Novatel Wireless,or a separate warranty from the distributor, applies to your purchase. This warranty does not apply to any (i)accessories or batteries for the products; or (ii) demonstration samples or prototypes of the products. Unlessotherwise provided in a written agreement between Novatel Wireless and the purchaser, all such accessories,batteries, samples or prototypes are provided by Novatel Wireless AS IS without any warranty of any kind.Novatel Wireless warrants to the original purchaser of the product from Novatel Wireless or its authorizeddistributor (as applicable) that, for a period of one (1) year from the date of shipment of the product from NovatelWireless, the product hardware will be substantially free from defects in material or workmanship under normaloperation, and the product firmware will perform substantially in accordance with the product documentationprovided by Novatel Wireless. Novatel Wireless does not warrant that (a) the product hardware or firmware willmeet the purchaser's requirements; (b) the operation of the product hardware or firmware will be uninterruptedor error-free; or (c) the product, when integrated in, or combined with, other products or software not suppliedby Novatel Wireless, will continue to perform substantially in accordance with the product documentation. Thislimited warranty is for the benefit of the original purchaser, and is not transferable.During the warranty period, Novatel Wireless, at its expense and in its sole discretion, will repair the product, orreplace the product with a corresponding or equivalent product, if it is determined to have a covered defect,provided that the purchaser first notifies Novatel Wireless (directly or through its authorized distributor fromwhich the product was purchased) of any such defect, furnishes Novatel Wireless with a proof of purchase (ifrequired), requests and obtains a return merchandize authorization (RMA) number from Novatel Wireless, andreturns the product under that RMA to Novatel Wireless (or, at Novatel Wireless's option, to its authorizeddistributor), with the shipping charges being prepaid by purchaser. If, upon reasonable examination of thereturned product, Novatel Wireless does not substantiate the defect claimed by purchaser, or determines that thedefect is not covered under this limited warranty, Novatel Wireless will not be required to repair or replace theproduct, but may instead reship the product to the purchaser (or, at Novatel Wireless's option, to its authorizeddistributor where the product can be made available to purchaser), in which case the purchaser shall beresponsible for paying Novatel Wireless's cost for reshipping the product to purchaser (or to Novatel Wireless'sauthorized distributor), and Novatel Wireless's usual charges for unpacking, testing, and repacking the productfor reshipment to purchaser (or to Novatel Wireless's authorized distributor). Purchaser shall bear the risk of lossor damage in transit to any product returned by purchaser to Novatel Wireless, or any returned product notfound to be defective or covered under this warranty, and reshipped by Novatel Wireless to purchaser (or toNovatel Wireless's authorized distributor). In the event Novatel Wireless repairs or replaces a defective productcovered by this limited warranty, the repaired or replacement product will be covered under this limited warranty
iv novatelwireless.comfor the remainder of the original warranty period on the defective product, or a period of ninety (90) days,whichever is longer. If Novatel Wireless is unable to repair or replace a defective product covered by this limitedwarranty, Novatel Wireless will provide to purchaser a credit or a refund (at Novatel Wireless's option) of theoriginal purchase price (excluding taxes and shipping charges). Any returned and replaced product, or anyproduct for which Novatel Wireless has furnished a credit or a refund, becomes the property of Novatel Wireless.Novatel Wireless shall not have any obligation to provide any firmware bug fixes, upgrades or new releases exceptas may be necessary to correct any covered defect of which purchaser notifies Novatel Wireless in writing duringthe warranty period. Novatel Wireless, from time to time and in its sole discretion, may make available fordownload on its website (www.nvtl.com), or may provide via email, certain firmware bug fixes, upgrades or newreleases for the product. Download and use of any such bug fixes, upgrades or new releases is subject to all of theapplicable terms and conditions of Novatel Wireless's technical support policy as posted and updated on itswebsite. Novatel Wireless shall have no obligation under this limited warranty for (a) normal wear and tear; (b) thecost of procurement of substitute products; or (c) any defect that is (i) discovered by purchaser during thewarranty period but for which purchaser does not request an RMA number from Novatel Wireless, as requiredabove, until after the end of the warranty period, (ii) caused by any accident, misuse, abuse, improper installation,handling or testing, or unauthorized repair or modification of the product, (iii) caused by use of any materials notsupplied by Novatel Wireless, or by use of the product other than in accordance with its documentation, or (iv)the result of electrostatic discharge, electrical surge, fire, flood or similar causes. The purchaser (or its customers,as applicable) shall be solely responsible for the proper configuration, testing and verification of the NovatelWireless product prior to deployment in the field, and for ensuring that any end user product or system intowhich the Novatel Wireless product is integrated or incorporated operates as intended and meets therequirements of purchaser (or its customers). Novatel Wireless shall have no responsibility whatsoever for theintegration, configuration, testing, verification, installation, upgrade, support or maintenance of any such enduser product or system, or for any liabilities, damages, costs or expenses associated therewith.NOVATELWIRELESS'S SOLE RESPONSIBILITY AND PURCHASER'S SOLE REMEDY UNDER THIS LIMITED WARRANTYSHALL BE FOR NOVATELWIRELESS TO REPAIR OR REPLACE THE PRODUCT (OR IF REPAIR OR REPLACEMENT ISNOT POSSIBLE, PROVIDE A CREDIT OR REFUND OF THE PURCHASE PRICE) AS PROVIDED ABOVE.NOVATELWIRELESS EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED,INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,SATISFACTORY PERFORMANCE AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALLNOVATELWIRELESS BE LIABLE FOR ANY INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR CONSEQUENTIALDAMAGES (INCLUDING WITHOUT LIMITATION LOSS OR INTERRUPTION OF USE, DATA, REVENUES OR PROFITS)RESULTING FROM A BREACH OF THIS WARRANTY OR BASED ON ANY OTHER LEGAL THEORY, EVEN IFNOVATELWIRELESS HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES.Some jurisdictions may require a longer warranty period than specified above and, accordingly, for products soldin those jurisdictions the applicable warranty period shall be extended as required under the laws of thosejurisdictions. Furthermore, some jurisdictions may not allow the disclaimer of implied warranties or the exclusionor limitation of incidental or consequential damages, so the above disclaimer, limitation or exclusion may not
v novatelwireless.comapply to products sold in those jurisdictions. This limited warranty gives the purchaser specific legal rights and thepurchaser may have other legal rights that vary from jurisdiction to jurisdiction. This limited warranty shall begoverned by the laws of the State of Texas, United States of America, without regard to conflict of laws principles.This limited warranty shall not be governed in any respect by the United Nations Convention on Contracts for theInternational Sale of Goods.
vi novatelwireless.comRegulatory ComplianceRegulatory ComplianceThis section summarizes the responsibilities and actions required of manufacturers and integrators whoincorporate OEM versions of the Novatel Wireless HS 3002 module into their products. In certain situations andapplications, these products will require additional FCC, CE, GCF, PTCRB or other regulatory approvals prior tosale or operation. Appropriate instructions, documentation and labels are required for all products. For moreinformation concerning regulatory requirements, please contact Novatel Wireless.PTCRB APPROVAL (FORMERLY FTA)The Novatel Wireless HS 3002 module is type approved in accordance with the requirements of and through theprocedures set forth by the GSM industry association. The relevant conformance specification is 3GPP TS 51010-1. Any OEM changes in the SIM interface, antenna port, software or the physical makeup of the unit may requirean incremental FTA to ensure continued compliance with the above-mentioned standard. For more informationconcerning type approval, please contact Novatel Wireless.FCC CERTIFICATIONNovatel Wireless certifies that the HS 3002 Radio Module (FCC ID: PKRNVWSA1100) complies with the RFrequirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 24, Subpart Eand Part 22 Subpart H of the FCC Rules and Regulations. This certification is contingent upon installation,operation and use of the HS 3002 module and its host product in accordance with all instructions provided toboth the OEM and end user. When installed and operated in a manner consistent with the instructions provided,the HS 3002 module meets the maximum permissible exposure (MPE) limits for general population / uncontrolledexposure at defined in Section 1.1310 of the FCC Rules and Regulations.The HS 3002 modem is designed for use in a variety of host units, "enabling" the host platform to perform wirelessdata communications. However, there are certain criteria relative to integrating the modem into a host platformsuch as a PC, laptop, hand held, monitor and control unit, etc. that must be considered to ensure continuedcompliance with FCC compliance requirements.
vii novatelwireless.comImportant Information for Canada/USA OEM IntegratorsThis section provides guidance for using the SA 1100 in host devices through the FCC Permissive Changeprocess. When utilizing the permissive change process, Novatel Wireless, the grantee, is responsible for allintegrations and must be consulted on all regulatory matters involving the SA 1100.The SA 1100 is granted with FCC/IC as a certified transmitter for mobile1and fixed use applications, and may beinstalled as a standalone2transmitter in final products meeting the following conditions. If the followingconditions are followed, it may be used in final products without additional FCC/IC certification. Otherwise,additional FCC/IC approvals must be obtained.lThe SA 1100 transmitter antennas must be installed to provide at least 20cm separation from the humanbody at all times.lThe SA 1100 transmitter antennas must not be co-located with any other transmitter or antenna within ahost device, except in accordance with FCC/IC multi-transmitter RF Exposure procedures.lThe transmitter antennas used with the SA 1100 must not exceed the following levels:lGSM850/WCDMA Band 5: the maximum gain is 6.9dBi..lGSM1900/WCDMA Band 2: the maximum gain is 2.0dBi.lOnly antennas of the same type and with equal or less gains as shown below may be used with this WLANdevice. Other types of antennas and/or higher gain antennas may require additional testing and/orauthorization for operation.lWLAN 2.4GHz: the maximum gain is 3.62dBi.lPIFA Antenna Type for 802.11b/g/n.lTo comply with the aspects of KDB 996369, strict adherence to the design parameters in the SectionAntenna and RF Signal Trace must be observed. This Section provides PCB RF trace design guidelines forthe coplanar micro strip between the transmitters RF compression pads and the SMA coaxial connector.lA label containing the SA 1100 FCC ID and Industry Canada certification number must be permanentlyaffixed to the exterior of the host device into which the SA 1100 transmitter is installed. The label may alsobe in a user accessible location such as under a panel or battery pack if it is a handheld device, readilyaccessible, not placed on a removable part and the FCC ID and Industry Canada certification number arevisible at the time of purchase. The label must contain a statement similar to the following:lThis device contains FCC ID: PKRNVWSA1100lThis device contains IC: 3229A-SA1100If the SA 1100 certified transmitter is intended for use in a portable use device, the OEM integrator is responsibleto design the product to comply with RF exposure requirements, and must work with Novatel Wireless (thegrantee) to satisfy FCC/IC SAR requirements. Refer to Industry Canada RSS-102 and FCC KDB publication 447498D01 and the applicable SAR/RF Exposure KDB publications available at:https://apps.fcc.gov/oetcf/kdb/reports/GuidedPublicationList.cfm. 3The system user manuals and other documentation must clearly indicate operating conditions that must beobserved to ensure compliance with FCC/IC RF exposure guidelines and also include appropriate caution andwarning statements and information.1Mobile Device Definition – FCC defines as a transmitting antenna located at a distance ≥ 20cm from the user2Standalone is defined as a single transmitter transmitting as opposed to 2 or more transmitters transmittingsimultaneously.3Portable Device Definition – FCC defines as a transmitting antenna located at a distance ≤ 20cm from the user.
viii novatelwireless.comThe host device containing the SA 1100 certified transmitter may also require compliance to FCC Part 15 SubpartB – Unintentional Radiator rule part as well as Industry Canada ICES-003.Cette section fournit des conseils pour l'utilisation de la SA 1100 dans des dispositifs d'accueil à travers lechangement à autorisation FCC processus . Lors de l'utilisation du processus de changement permissive , NovatelWireless , le bénéficiaire est responsable de tous les intégrations et doivent être consultés sur toutes les questionsréglementaires touchant la SA 1100 .Le SA 1100 est accordée aux normes FCC / IC comme un émetteur certifié pour mobile1et utilisez les applicationsfixes , et peut être installé comme un émetteur de standalone2dans les produits finaux répondant aux conditionssuivantes . Si les conditions suivantes sont respectées, il peut être utilisé dans les produits finaux sans certificationFCC / IC supplémentaire . Sinon , les approbations FCC / IC supplémentaires doivent être obtenues .lLes SA 1100 antennes d'émission doivent être installés pour fournir au moins 20 cm la séparation du corpshumain à tout moment.lLes SA 1100 antennes émettrices ne doivent pas être co- localisés avec un autre émetteur ou antenne dansun dispositif d'accueil , sauf en conformité avec la FCC / IC procédures d'exposition RF multi- émetteurs .lLes antennes d'émission utilisés avec la SA 1100 ne doivent pas dépasser les niveaux suivants :lGSM850 / WCDMA Bande 5 : le gain maximum est 6.9dBi.lGSM1900 / WCDMA Band 2 : le gain maximum est 2.0dBi.lSeuls les antennes du même type et avec des gains égaux ou moins , comme indiqué ci-dessous peuventêtre utilisés avec cet appareil WLAN . Autres types d'antennes et / ou des antennes à gain plus élevéspeuvent nécessiter des tests et / ou autorisation supplémentaire pour operation.lWLAN 2,4 GHz : le gain maximum est 3.62dBi .lType d'antenne PIFA pour 802.11b / g / n .lPour se conformer aux aspects de la KDB 996 369 , le strict respect des paramètres de conception de lasection de l'antenne et du signal RF Trace doit être respectée. Cette section fournit des lignes directrices deconception de traces de PCB RF pour la bande coplanaire micro entre les plaquettes de compressionémetteurs RF et le connecteur coaxial SMA .lUne étiquette contenant la FCC ID et Industrie Canada nombre SA 1100 certification doit être apposée defaçon permanente à l'extérieur de l'appareil hôte dans laquelle le SA 1100 émetteur est installé . L'étiquettepeut également être dans un endroit accessible à l'utilisateur comme sous un paquet de panneau ou de labatterie si elle est un appareil portable , facilement accessible , pas placé sur une partie amovible et lenuméro de certification de la FCC ID et Industrie Canada sont visibles au moment de l'achat . L'étiquettedoit contenir une déclaration semblable à la suivante :lCet appareil contient FCC ID : PKRNVWSA1100lCet appareil contient des IC : 3229A - SA11001Définition de dispositif mobile – la FCC définit comme une antenne d'émission située à une distance ≥ 20cm del'utilisateur.2Autonome est défini comme un seul émetteur transmettant au lieu de deux ou plusieurs émetteurs émettantsimultanément.
ix novatelwireless.comSi l'émetteur certifiée SA 1100 est destiné à être utilisé dans un dispositif à usage portable , l'intégrateur OEM estresponsable de la conception du produit à se conformer aux exigences d'exposition RF et doit travailler avecNovatel Wireless ( le bénéficiaire ) pour satisfaire aux exigences de la FCC / IC SAR . Reportez-vous à IndustrieCanada RSS -102 et FCC KDB publication 447498 D01 et la SAR applicable / publications KDB d'exposition RFdisponibles à : https://apps.fcc.gov/oetcf/kdb/reports/GuidedPublicationList.cfm . 1Les manuels d'utilisation du système et d'autres documents doivent indiquer clairement les conditions defonctionnement qui doivent être respectées pour assurer la conformité avec les lignes directrices d'exposition dela FCC / IC RF et comprennent également des déclarations et informations avertissements et consignesappropriées .Le dispositif hôte contenant l'émetteur certifiée SA 1100 peut également exiger le respect de la FCC Partie 15Sous-partie B - Source de rayonnement involontaire partie de la règle ainsi que Industrie Canada ICES-003.Industry CanadaThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the followingtwo conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil est conforme aux normes d’Industrie Canada exempts de license(s) RSS. Son fonctionnement estsoumis aux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences, et (2) cet appareildoit accepter toute interférence, y compris les interférences pouvant provoquer un fonctionnement indésirablede l’appareil.Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type andmaximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interferenceto other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power(e.i.r.p.) is not more than that necessary for successful communication.Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec uneantenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le butde réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le typed'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensiténécessaire à l'établissement d'une communication satisfaisante.1Définition de dispositifportable – la FCC définit comme une antenne d'émission située à une distance ≤ 20cm del'utilisateur.
x novatelwireless.comFCC NOTICE TO USERSNovatel Wireless has not approved any changes or modifications to this device by the user. Any changes ormodifications could void the users authority to operate the device. See 47 CFR Sec. 15.21. The device complieswith part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. See 47 CFR Sec. 15.19.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on the user is encouraged to try to correct the interference by one or more of the following measures:lReorient or relocate the receiving antenna.lIncrease the separation between the equipment and receiver.lConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.lConsult the dealer or an experienced radio/TV technician for help.If the FCCID of the module is not visible when installed in the host platform, then a permanently attached ormarked label must be displayed on the host unit referring to the module.The label should contain wording such as:Contains FCC ID: MxxxxxxxxThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interferencereceived, including interference that may cause undesired operation.REGULATORY REQUIREMENTS FOR OTHER COUNTRIESIn most other countries there are similar rules and regulations that may need to be met for importing the HS 3002module and for placing it on the market in the integrated device. Each country may require a different mark ofapproval as an acceptance requirement. For each of these cases the country should identified, and theappropriate steps should be taken to meet the requirements set forth in the intended market.ROHS COMPLIANCEAs a part of Novatel Wireless's corporate policy of environmental protection, Novatel Wireless takes every step toensure that the HS 3002 modules are designed and manufactured to comply to the European Union Directive2002/95/EC for the Restriction of Hazardous Substances (RoHS).
xi novatelwireless.comTable of Contents1 Getting Started 1Device Overview 2Versions 2Label 2Technical Specifications 2Interfaces 2Outputs 3Mechanical: Storage And Transportation 3Mechanical: Operational 3Application Interface 3Power 3Radio Features 3Audio Features 3Environmental 4Packet Data Transfer 4Regulatory 4Reference Documents 4Operating Power 5SA 1100 Communications Board Input Power 5HS 3002 Chipset Typical Input Current 52 Using The Device 6SIM Card 7Powering The Device 7Simon XT Connector 8USB 8Radio Connectivity 9
1 novatelwireless.com1Getting StartedDevice OverviewTechnical SpecificationsOperating Power
2 novatelwireless.comDevice OverviewThe SA 1100 Communications Board incorporates the Novatel Wireless HS 3002 cellular module for dataconnectivity and messaging. The SA 1100 Communications Board supports only incoming voice calls and SMSmessages. The device does not include a dial pad interface to make outbound calls.The SA 1100 Communications Board includes a USB port to allow access to the module's AT command interface.This is an integrated product designed to be used in conjunction with a third party end product. An 8-pin adapterbetween the SA 1100 Communications Board and the third party end product provides for power and datatransfer.This device is intended for professional installation and not for consumer use.VersionsThe SA 1100 Communications Board is available in the following configurations:lSA 1100-20lSA 1100-20-ATLabelFigure 1-1 Device LabelTechnical SpecificationsInterfacesHost Interface: Serial InterfaceData input/output interface: 100 position 0.4 mm pitch connector (Molex P/N 55909-1074)Primary serial port: V.24 protocol, 1.8V levels, UART implementation, Hardware flow controlUSB port: USB serial port and USB Debug (USB Debug is Novatel Wireless Use only)Antenna Interface: B2B Spring contact
3 novatelwireless.comCommand protocol: Novatel Wireless Packet API, AT Command setReference clock: 32 kHz output reference clock (accessible via 100-pin connector)ADC: 2 ADC inputsLogic: lUART1lPCMlDigital AudiolPWONlPower ControlOutputsSimon XTMechanical: Storage And TransportationTransportation vibration, packaged: ASTM D999Drop, packaged: ASTM D775 method A, 10 dropsMechanical: OperationalOperational vibration Random IEC60068-2-64 / MIL-STD-202G Method 214A50-2000 Hz, 7.56 GRMS, 3 Axis, 8 Hours per axisApplication InterfaceUSB: 3.4 to 4.4 Vdc (vbat)VBUS: Supply Vripple must be less than 25 mV across all frequenciesPowerElectrical Power: 6.0 to 12.0 VdcRadio FeaturesFrequency bands: HSDPA/WCDMA: B1 (2100MHz) and B8 (900 MHz) GPRS/EDGE: 900 and 1800Air Interfaces: UMTS/WCDMA– R99– HSDPA category 5/6 plus equalizer (3.6 Mbps peak rate)GSM/GPRS/EDGE– GSM Release 4– GPRS/EDGE Multislot Class 12, Release 4– DTM Multislot Class 11Audio FeaturesPhone Jack
4 novatelwireless.comEnvironmentalCompliant Operating Temperature -20 °C to 60 °COperating Temperature -30 °C to 70 °CStorage Temperature -40 °C to 85 °CHumidity Up to 95% non condensingEmissions FCC 47 CFR Parts 2,15,22 & 24Packet Data TransferProtocolShort MessageServicesText, MO/MTRegulatoryAgency approvals FCC CertificationIndustry CanadaPTCRBCEGCFReference DocumentsCNN0401xAT001 - HS 3002 AT Command ReferenceCNN0401xTG001 - HS 3002 Transition GuideENF0000SD001 - HDK GuideCNN0401AN001 - Using Digital Audio on the HS 3002
5 novatelwireless.comOperating PowerSA 1100 Communications Board Input PowerThe SA 1100 Communications Board receives 6-12 VDC power from an external power supply via a ferrite beaddressed coaxial cable.HS 3002 Chipset Typical Input CurrentTypical Results @ 3.7 V, 25 deg C, with 1000 μF at connector input on VBAT and RF terminated into a 50 Ω resistiveload.Band Mode Avg(mA)Peak(mA) NotesB2 HSPA WCDMA Radio Acccess Bearer channel of RMC12 MaxPower 23 dBm540B5 HSPA WCDMA Radio Acccess Bearer channel of RMC12 MaxPower 23 dBm525GSM850 GPRS 2000GSM850 EGPRS 1200GSM1900 GPRS 1300GSM1900 EGPRS 900*4:1 VSWR
6 novatelwireless.com2Using The DeviceSIM CardPowering the DeviceSimon XT ConnectorUSBRadio Connectivity
7 novatelwireless.comSIM CardTo insert the SIM card into the SIM card slot located on the SA 1100 Communications Board, follow these steps:1. Unlock the SIM card holder by sliding the holder in the "open" direction as marked on the SIM card holder.2. Insert the SIM card into the holder. Make sure the gold contact points on the SIM card are facing down (towardthe board).3. Lock the SIM card holder by sliding the holder in the "lock" direction as marked on the SIM card holder.Powering The DeviceThe SA 1100 requires 6-12 VDC power.The 8-pin adapter between the SA 1100 Communication Board and the third party end device provides bothpower and data.To power the SA 1100, connect the 8-pin connector to the Security Panel Main Board connector.
8 novatelwireless.comThe SA 1100 power pins are shown in the illustration below.Simon XT ConnectorThe Simon XT connector provides for data connectivity between the SA 1100 Communications Board and thethird party end product.USBUSB is provided solely for the communication with the module.
9 novatelwireless.comRadio ConnectivityRadio connectivity is provided solely by an Novatel Wireless HS 3002 module which has all APIs integrated withthe module software.

Navigation menu