Insignia Ns 40D40Sna14 Quick Start Guide 40D40SNA14_13 0420_QSG_V2_ENG__lr
2014-07-06
: Insignia Insignia-Ns-40D40Sna14-Quick-Start-Guide insignia-ns-40d40sna14-quick-start-guide insignia pdf
Open the PDF directly: View PDF .
Page Count: 2
CABLE
QUICK SETUP
GUIDE
40" LED TV
NS-40D40SNA14
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 1/DVI (ARC) jack to connect a DVI device to your TV. Attach
an HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack.
Note: Images may not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power cable in until
all other devices have
been connected.
Multipurpose jacks: You can plug any
device that uses HDMI into any HDMI
jack. However,certain devices must be
connected to the HDMI/DVI (ARC)
I jack.
See the instructions that came with
your ARC or DVI device for more
information.
Note: The HDMI/DVI (ARC) jack is a
shared jack. This means you can only
connect only one DVI or ARC device at
a time.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
Note: Connect the yellow video cable
connector to the green VIDEO/Y jack
on the back of your TV.
Using an HDMI cable (BEST)
How do I connect my TV to an antenna or cable wall jack?
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need: A soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches.
B See the instructions that came with your wall mount for more information about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the
screen from damages and scratches.
B Secure the stand column to your TV with the six provided 16 mm screws
(the shorter screws).
C Secure the TV stand to the stand column with the ve provided 18 mm screws
(the longer screws).
Power indicator
Remote control sensor
Before using your new product, please read these instructions to prevent any damage.
INPUTMENU CH CH
VOL+VOL- POWER
Remote control
and two AAA batteries
T
Stand column
V stand
B4 type (18mm length)
(5 pcs.)
B4 type (16mm length)
(6 pcs.)
INPUT
1 2 3
4 5 6
7 8 9
0
MENU
EXIT
INFO+
ENTER
ASPECT
MUTE
FAVORITE
SLEEP
MTS/ASP PICTURE
AUDIO
CCD
VOL
+
-
CH
NS-RC4NA-14
B4 type (16mm) B4 type (18mm)
B
AC
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
Component cable option
AV cable option
AUDIO/ VIDEO
OUT
AUDIO/VIDEO OUT
(ARC)
(ARC)
(ARC)
V2 ENGLISH 13-0420
MOVE SELECT
OK
ENTER
MENU
PREVIOUS
EXIT
EXIT
Set menu language to English, Français, or Español
TV SETUP
Choose Your Menu Language
Français
Español
English
4
40" LED TV I QUICK SETUP GUIDE I NS-40D40SNA14
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289
(U.S./Canada markets)
INSIGNIA is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC,
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc.
All Rights Reserved
1-877-467-4289
www.insigniaproducts.com
Using digital audio
Using analog audio
Note: Refer to the instructions that came
with your speakers for more information.
Note: Refer to the instructions that came
with your speakers for more information.
I already have a universal remote control. How do I make it control this TV?
Using your remote control
The best time to turn on your TV is after you have attached the TV
stand or wall-mounted your TV and connected all devices.
1 Plug the AC power cord into a power outlet.
2 Install the remote control batteries.
3 Press (power) on your remote control.
4 Follow the on-screen instructions.
UNIVERSAL REMOTE TV CODES
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026
Charter 2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox 1326, 1463
Direct TV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002
Dish Network 720
Time Warner 400, 450, 461, 456, 10463, 1463, 0463
Tivo 0091
Verizon 0198, 0490
One for All 0054
Philips 0198, 0490
RCA 135
Sony 068, 069, 078, 096
If you already have a universal remote control that you would like to program to work with your TV and don’t
want to use the included Insignia remote control, see the table for common codes.
CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
- OR -
For an up-to-date list of codes for other
cable providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
TURNING ON MY TV
When can I turn on my TV?
UNIVERSAL REMOTE CONTROLS
RECALL
Returns to the previous channel.
Arrows
Navigate in on-screen menus.
HOME
Opens the on-screen menu.
INFO*
Opens a TV status banner.
CCD
Turns closed captioning on or o.
MUTE
Mutes the sound.
Channel
Changes the TV channels.
MTS/SAP
Analog TV – Cycles through mono,
stereo, and secondary audio for
analog programs.
Digital TV – Selects the audio
language for the current channel.
PICTURE
Selects the picture mode.
AUDIO
Selects the audio mode.
Numbers
Enter channel numbers and parental
control password.
Enters a digital sub-channel number
(for example 4.1).
ENTER
Conrms selections or opens a sub-menu
.
MENU
Opens the on-screen menu.
EXIT
Closes the on-screen menu.
ASPECT
Changes how the picture is
displayed on the screen.
Volume
Changes the volume.
SLEEP
Sets the sleep timer.
FAVORITE
Opens the Favorite Channel List.
INlink Controls
Control HDMI-CEC devices
connected to your TV.
NORMAL: Original aspect ratio is
preserved.Black bars are present if content
is notwidescreen (16:9).
ZOOM: Expands the image to ll the
screen. The top and bottom of the image
may be cropped.
WIDE: Displays content recorded in a
16:9 (wide-screen) aspect ratio.
CINEMA: Stretches the image at the
edges, but keeps a clear image in the
center.
AUTO: Automatically adjusts the image
based on the screen size and the TV
program. Select this option if you are
uncertain which aspect ratio to choose.
Note: Auto is only available when Auto
Zoom in the Channels menu is set to On.
What are my screen-size options?
INPUT
Opens the INPUT SOURCE list.
Power
Turns your TV on or o.
TV
HDMI 1
HDMI 2
VGA
Component/AV
USB(Photos)
INPUT SOURCE
HDMI 3
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Adjust settings to affect picture quality.
Picture
MOVE SELECT PREVIOUS EXIT
Picture Mode
Backlight
Brightness
Contrast
Tint
Energy Savings
39
50
52
75
0
50
Color
Sharpness
Advanced Video
SOUNDBAR
AUDIO IN
SOUNDBAR
DIGITAL
AUDIO IN