Insignia Ns Av511 Users Manual AV511_11 0201_MAN_ENG_V1

7cc9de8f-2712-4702-9.. 7cc9de8f-2712-4702-9d4c-6304fef23dcb

NS-AV511 to the manual 7cc9de8f-2712-4702-9d4c-6304fef23dcb

2015-01-24

: Insignia Insignia-Ns-Av511-Users-Manual-318697 insignia-ns-av511-users-manual-318697 insignia pdf

Open the PDF directly: View PDF .
Page Count: 38

Download
Open PDF In Browser	View PDF

NS-AV511_11-0201_MAN_.book Page 0 Wednesday, April 13, 2011 9:31 AM

User Guide

Surround Sound Receiver
NS-AV511

NS-AV511_11-0201_MAN_.book Page ii Wednesday, April 13, 2011 9:31 AM

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1
1
1
2

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3
3
3
3
4
4

Setting up your home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Finding a location for your home theater system . . . . . . . . . . . . . . . . . . 5
Placing your speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting your speakers to the receiver . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rocketboost Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing batteries in the remote control . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configuring speakers (Sp Config menu) . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting speaker distance (Sp Distance menu) . . . . . . . . . . . . . . . . . . . . 15
Setting the level calibration (Level Cal menu) . . . . . . . . . . . . . . . . . . . . 15

Operating your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Turning your receiver on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Understanding basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Listening to your receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Presetting FM or AM stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using the listening modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using advanced setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Using on-screen setup menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up HDMI input (HDMI Input menu) . . . . . . . . . . . . . . . . . . . . . .
Setting up Component input (Component menu) . . . . . . . . . . . . . . .
Setting up Digital Audio (Digital Audio menu) . . . . . . . . . . . . . . . . . . .
Adjusting the audio (Audio Adjust menu) . . . . . . . . . . . . . . . . . . . . . . . .
Setting up HDMI (HDMI Setup menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Naming inputs (Name Edit menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a digital input signal format (Fixed Mode) . . . . . . . . . . . . . .

20
20
21
21
21
22
23
24
25

Controlling other components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Preprogrammed remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the remote control to control other components . . . . . . . . . . 26
Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page iii Wednesday, April 13, 2011 9:31 AM

Contents

Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Amplifier section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Video section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tuner section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
General section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Dolby TrueHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DTS HD® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
HDMI® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

www.insigniaproducts.com

iii

NS-AV511_11-0201_MAN_.book Page iv Wednesday, April 13, 2011 9:31 AM

Contents

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 1 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511
Surround Sound Receiver
Introduction

Safety information

Congratulations on your purchase of a high-quality
Insignia product. Your NS-AV511 represents the
state of the art in Surround Sound Receiver design
and is designed for reliable and trouble-free
performance.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.

WARNING

AVIS

RISK OF ELECTRIC SHOCK
DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Important safety instructions

Ventilation
Caution
Do not block any ventilation openings. Install in
accordance with these instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of your
system and to protect it from over-heating.
The openings should never be blocked by placing
your system on a bed, sofa, rug, or other similar
surface. This system should not be placed in a built-in
installation such as a bookcase or rack unless correct
ventilation is provided or these instructions have
been adhered to.

1
2
3
4
5
6
7
8

Power cord
Caution
We recommend that most appliances be placed
upon a dedicated circuit—a single outlet circuit
which powers only that appliance and has no
additional outlets or branch circuits. Check the
specification page of this manual for power
requirements.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine the power cord. If its
appearance indicates damage or deterioration,
unplug it, discontinue use of your system, and have
the cord replaced with an exact replacement part by
an authorized service provider.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
your receiver.
To disconnect power from the outlet, pull out the
plug. When installing your system, make sure that the
plug is easily accessible.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by
the manufacturer.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 2 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

PORTABLE CART WARNING
12 Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury S3125A
from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15 Damage Requiring Service
Unplug the apparatus from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
• When the power-supply cord or plug is
damaged,
• If liquid has been spilled, or objects have fallen
into the apparatus,
• If the apparatus has been exposed to rain or
water,
• If the apparatus does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the
apparatus to its normal operation,
• If the apparatus has been dropped or
damaged in any way, and
• When the apparatus exhibits a distinct change
in performance this indicates a need for
service.
16 Object and Liquid Entry
• Never push objects of any kind into the
apparatus through openings as they may
touch dangerous voltage points or short-out
parts that could result in a fire or electric
shock.
• The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases shall be placed on
the apparatus.
• Don’t put candles or other burning objects on
top of this unit.
17 Batteries
Always consider the environmental issues and
follow local regulations when disposing of
batteries.
18 If you install the apparatus in a built-in
installation, such as a bookcase or rack, ensure
that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and
sides and 10 cm (4") at the rear. The rear edge of
the shelf or board above the apparatus shall be
set 10 cm (4") away from the rear panel or wall,
creating a flue-like gap for warm air to escape.

The temperature protection operates if the
apparatus attains an abnormally high temperature.
The apparatus cannot operate until it has cooled
down.

Precautions
1 Recording copyrighted material—Unless it’s for
personal use only, recording copyrighted
material is illegal without the permission of the
copyright holder.
2 AC fuse—The AC fuse inside the unit is not
user-serviceable. If you cannot turn on the unit,
contact your Insignia dealer.
3 Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a
soft cloth dampened with a weak solution of
mild detergent and water. Dry the unit
immediately afterwards with a clean cloth.
Don’t use abrasive cloths, thinners, alcohol, or
other chemical solvents, because they may
damage the finish or remove the panel lettering.
4 Power
Warning
Before plugging in the unit for the first time, read the
following section carefully.

AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets
the voltage requirements printed on the unit’s
rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60
Hz).
The power cord plug is used to disconnect this
unit from the AC power source. Make sure that
the plug is readily operable (easily accessible) at
all times.
Pressing ON/STANDBY to select Standby mode
does not fully shutdown the unit. If you do not
intend to use the unit for an extended period,
remove the power cord from the AC outlet.
5 Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and
headphones can cause hearing loss.

6 Batteries and heat exposure
Warning
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat as sunshine, fire, or the
like.

7 Never touch this unit with wet hands—Never
handle this unit or its power cord while your
hands are wet or damp. If water or any other
liquid gets inside this unit, have it checked by
your Insignia dealer.
8 Handling notes
• If you need to transport this unit, use the
original packaging to pack it how it was when
you originally bought it.
• Do not leave rubber or plastic items on this
unit for a long time, because they may leave
marks on the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 3 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Components

Front controls

Features
• 90 Watts per Channel @ 8 ohms
• Rocketboost™ Expandable Wireless Audio
Technology: sends wireless audio for surround
sound, subwoofer, and left/right channels;
receives wireless audio from Rocketboost devices
(Requires Rocketboost Wireless Card, RF-RBCARD,
sold separately)
• HDMI (Audio Return Channel, 3D), Deep-Color,
x.v.Color*, Lip Sync, DTS-HD Master Audio,
DTS-HD High Resolution Audio, Dolby® TrueHD,
Dolby® Digital Plus, DSD and Multi-CH PCM
• 4 HDMI Inputs and 1 Output
• 3 Digital Inputs (2 Optical/1 Coaxial)
• Component Video Switching (2 Inputs/1 Output)
• 40 FM/AM Presets
• H.C.P.S. (High Current Power Supply) Massive High
Power Transformer
• Direct Mode
• 192 kHz/24-bit D/A Converters
• Powerful and Highly Accurate 32-bit Processing
DSP
• Crossover Adjustment
(40/50/60/70/80/90/100/120/150/200 Hz)
• A/V Sync Control Function (up to 400 ms)
• On-Screen Display via HDMI
* “x.v.Color” is a trademark of Sony Corporation.

Item

Description

|/ ON/STANDBY button Press to turn on your stereo receiver.
HDMI THRU indicator
Lights when the HDMI pass-through function is
activated in standby mode.
STANDBY indicator
Lights red when your stereo receiver is in
standby mode.
Remote control sensor
Receives the signal from the remote control.
Display
See “Display” on page 3 for additional
information.
SETUP button
Press to open the on-screen menus.
Press TUNING / to tune the radio to the
TUNING /
next or previous station.
PRESET /
ENTER
Press PRESET / to tune the radio to the
next or previous station preset.
Press ENTER to confirm a selection.
RETURN button
In menu mode, press to return to the main
menu.
MEMORY button
Press to save a radio station preset. Press with
the TUNING MODE button to clear presets.
TUNING MODE button
Press to turn on the receiver tuning mode and
listen to the radio. Press with the MEMORY
button to clear presets.
MASTER VOLUME knob
Turn to increase or decrease the volume.
Headphone jack
Plug your headphones into this jack.
Input selector buttons
Press to select the input signal source you want.
Protective cap
A rubber cap protecting the A/V jacks. Remove
the cap when using the jacks.
AUX INPUT VIDEO jack
Plug an external video source into this jack.
AUX INPUT AUDIO L/R
Plug an external sound source into this jack.
jacks
HOME button
Press to access audio settings. See “Changing
audio settings” on page 23.

2
3
4
5
6
7

Rocketboost Wireless Card Ready

Installing a Rocketboost
Wireless Card (sold separately)
enables this product to send
and receive wireless audio with
your other Rocketboost
products.
What is Rocketboost?

Rocketboost is expandable wireless digital audio.
• Products with Rocketboost™ technology let you
easily expand your listening experience
throughout your home.
• Rocketboost does not interfere with other
wireless products in your home.
• Rocketboost is uncompressed digital audio
compatible with all audio formats such as Dolby,
TrueHD, and DTS-HD Master Audio used with
Blu-ray.
When you see the Rocketboost logo on any
product, it has been designed to work with other
Rocketboost products, no matter who
manufactures them.

11
12
13
14
15
16
17

Function

Display

Package contents
•
•
•
•
•
•

Receiver
Remote control
AA batteries (2)
FM antenna
AM antenna
User Guide

www.insigniaproducts.com

Indicator

1
2
3
4
5
6

Audio input indicator
Listening mode indicator
Tuning indicators
SLEEP indicator
MUTING indicator
DIGITAL display

NS-AV511_11-0201_MAN_.book Page 4 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Back

Remote control

Description

Function

DIGITAL IN jacks

HDMI jacks

ANTENNA connectors

FRONT SPEAKERS
SURROUND SPEAKERS
CENTER SPEAKER

5
6

AC power cord
COMPONENT video jacks

Composite Video and
Audio L/R jacks

8
9

MONITOR OUT V (Video)
SUBWOOFER

Plug the optical digital cable from a game (1) or
TV/CD (2) into the upper jacks, or the coaxial
digital cable from a BD/DVD into the lower jack.
Plug the HDMI signal input cable from a GAME
(IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD
(IN1).
Plug the HDMI output signal cable to a TV or
monitor into the OUT jack.
Connect a 75 ohm FM antenna to the coaxial
connector or an AM loop antenna to the wire
connectors.
Connect the front speakers to these jacks.
Connect the left and right surround speakers and
the center speaker to these connectors. If you use
the RF-RBCARD to connect your surround speakers,
do not connect them here.
Plug this cord into an AC power outlet.
Plug the cables from a component video source
into the #1 (BD/DVD) or #2 (CBL/SAT) jacks.
Plug the cables to a component video monitor into
the OUT jacks.
The jacks are color coded (red, green, and blue) to
correspond to the cable connectors.
Plug the composite video and audio L/R output
cables from the indicated devices into these jacks.
For video recording, plug the composite video and
audio L/R input cables to a VCR or DVR into the
OUT jacks
Connect this jack to a TV monitor.
Connect the subwoofer to this jack.

Item Description

Function

ON/STANDBY button

Remote mode input selector
buttons

ENTER / /
TUNING+/–

4
5

SETUP button
LISTENING MODE buttons

Press to turn the power on to your receiver.
Press again to go to standby mode.
Press to directly select your receiver input
source.
Press the arrow keys to navigate through the
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
Press to open the on-screen menus.
Press to select the listening mode you want.
See “Using the listening modes” on page 18
for additional information.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 5 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Placing your speakers

Item Description

Function

In tuner mode, press D.TUN, then the
number buttons to tune directly to a
frequency.
Press DIMMER to adjust the brightness of
the display.
Press repeatedly to cycle through the
available input source information.
Press to control the receiver.
Press to mute the sound output from the
receiver.
Press to toggle between auto and manual
tuning modes.
Press to increase or decrease the sound
volume.
In tuner mode, press to go to the next or
previous preset channel.

D.TUN
DIMMER

DISPLAY button

8
9

RECEIVER button
MUTING button

TUN MODE button

VOL

12
13

CH +/– buttons
ALBUM
RETURN button

HOME button

Number buttons

SLEEP/CLR button

buttons

In menu mode, press to return to the main
menu or previous menu.
Press to access audio settings. See
“Changing audio settings” on page 23.
Press to enter a preset number or to
manually tune the radio.
Press repeatedly to select the sleep timer
duration.
In menu mode, press to clear an entry.

Setting up your home
theater system
Finding a location for your home theater
system
• Install your home theater system on a stable flat
surface. Position your receiver so that it has a
direct line of sight to the remote control.
• Do not expose your system to extremes of
temperature or humidity.
• Avoid placing your system on a hot surface such
as on top of other hot running equipment. Make
sure that there is adequate ventilation to your
system.
Caution

1 - Center speaker
This speaker enhances the front speakers, making
sound movements distinct and providing a
full-sound image. In movies it is used mainly for
dialog. Position it close to your TV facing forward at
about ear level, or at the same height as the front
speakers.
2 - Front speakers
These provide the overall sound. Their role in a
home theater system is to provide a solid anchor for
the sound image. They should be positioned facing
the listener at about ear level, and equidistant from
the TV. Angle them inward so as to create a triangle,
with the listener at the apex.
3 - Subwoofer
The subwoofer handles the bass sounds of the LFE
(Low-Frequency Effects) channel. The volume and
quality of the bass output from your subwoofer
depends on its position, the shape of your listening
room, and your listening position. In general, a
good bass sound can be obtained by installing the
subwoofer in a front corner, or at one-third the
width of the wall, as shown.
Tip

Do not install the receiver in a confined space such as
a bookcase.

To find the best position for your subwoofer, while
playing a movie or some music with good bass,
experiment by placing your subwoofer at various
positions within the room, and choose the one that
provides the most satisfying results.

Caution
Connect the AC cord only after the speakers,
antenna, and all optional equipment have been
connected. Never make or change any
connections with the power turned on.

4 - Surround speakers
These speakers are used for precise sound
positioning and to add realistic ambience. Position
them at the sides of the listener, or slightly behind,
about two to three feet (60 to 100 cm) above ear
level. Ideally they should be equidistant from the
listener.
Speaker precautions
• Do not put water or other liquids close to the
speakers. If liquid is spilled on the speakers, they
may be damaged.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 6 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

• Speakers should only be placed on sturdy, flat
surfaces that are free from vibration. Putting them
on uneven or unstable surfaces, where they may
fall and cause damage, affects the sound quality.

• Don’t connect one speaker to several terminals.

Connecting your speakers to the receiver
Speaker configuration
The following table indicates the channels you
should use depending on the number of speakers
that you have. For 5.1-channel surround-sound
playback, you need five speakers and a powered
subwoofer.
Number of channels 2

Front speakers
Center speaker

Surround speakers

1
2

No matter how many speakers you use, a powered
subwoofer is recommended for a really powerful
and solid bass.
To get the best from your surround sound system,
you need to set the speaker settings.
Speaker connection precautions
Read the following before connecting your
speakers:
• You can connect speakers with an impedance of
between 6 and 16 ohms. If you use speakers with
a lower impedance, and use the amplifier at high
volume levels for a long period of time, the
built-in amp protection circuit may be activated.
• Disconnect the power cord from the wall outlet
before making any connections.
• Pay close attention to speaker wiring polarity. In
other words, connect positive (+) terminals only
to positive (+) terminals, and negative (–)
terminals only to negative (–) terminals. If you get
them the wrong way around, the sound will be
out of phase and will sound unnatural.
• Unnecessarily long, or very thin speaker cables
may affect the sound quality and should be
avoided.
• Be careful not to short the positive and negative
wires. Doing so may damage the receiver.
• Make sure the metal core of the wire does not
contact the receiver’s rear panel. Doing so may
damage the receiver.

To connect the speaker cables:
1 Strip 1/2" to 5/8" (12 to 15 mm) of insulation
from the ends of the speaker cables, and twist
the bare wires tightly.
2 Push in on the speaker terminals on the receiver
and insert the speaker wires into the terminals.
The following illustration shows which speaker
should be connected to each pair of terminals.
3 Release the terminals to secure the wire.
To connect the subwoofer:
1 Using a subwoofer RCA cable, connect the AV
receiver's SUBWOOFER PRE OUT jack to an
input on your powered subwoofer, as shown.
Front left speaker

Front right speaker

Center speaker

Powered subwoofer

Surround right speaker

Surround left speaker

Connecting devices
Warning
Do not plug the AC cord into the AC outlet until all
connections are completed.

Notes
•

• Don’t connect more than one cable to each
speaker terminal. Doing so may damage the
receiver.

www.insigniaproducts.com

•

Be sure to observe the color coding when
connecting audio and speaker cords.
Make connections firmly and correctly. Failure
to do this can cause loss of sound, add noise to
the sound, or damage your receiver.

NS-AV511_11-0201_MAN_.book Page 7 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Connecting the antenna

2 Connect the AM loop antenna to the receiver.

This section explains how to connect the supplied
indoor FM antenna and AM loop antenna.
The receiver won’t pick up any radio signals without
any antenna connected, so you must connect the
antenna to use the tuner.
AM Antenna connection

Notes
Place the AM loop antenna as far as possible from the
receiver, television, speaker cords, and the AC cord.
Change the position of the antenna until you get the
best reception of your favorite AM stations.
To improve reception, use an outdoor AM antenna
instead of a loop AM antenna. Disconnect the indoor
antenna before replacing it with an outdoor antenna.

Connecting audio components
Push

Release

Insert wire

HDMI cable
Receiver

Assembling the AM loop antenna

Blu-ray disc/DVD player
Game console

TV or projector

Other cables

AM loop antenna (supplied)

Video
Audio

FM Antenna connection
FM 75 Ohm

Receiver

Insert the plug
fully into the jack
Blu-ray disc/DVD player
TV or projector

Game console

Notes
Thumbtacks

•
•

Indoor FM antenna (supplied)

•
•

To connect the antennas:
1 Connect the FM antenna to your receiver.

Before making any AV connections, read the
manuals supplied with your AV components.
Don’t connect the power cord until you’ve
completed and double-checked all AV
connections.
Push plugs in all the way to make good
connections (loose connections can cause noise
or malfunctions).
To prevent interference, keep audio and video
cables away from power cords and speaker
cables.

Note
If you are using an indoor FM antenna, change the
position of the antenna until you get the best
reception of your favorite FM stations.
To improve reception, use a 75 Ω outdoor antenna
instead of an indoor antenna. Disconnect the
indoor antenna before replacing it with an outdoor
antenna.

Tip
Once your receiver is ready for use, you need to tune
into a radio station and position the antenna to
achieve the best possible reception.
If you cannot achieve good reception with the
supplied indoor FM antenna, try a commercially
available outdoor FM antenna instead.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 8 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

AV cables and jacks
Signal

Cable

Video and
audio

HDMI

Video

Jack

HDMI connections can carry digital video and audio.

HDMI

Green

Blue

Red

Composite video

Yellow

Optical digital audio

OPTICAL

Component video

Pb/Cb
Pr/Cr

Audio

Description

Component video is a better alternative to Composite video, and
is used for TVs, VCRs, DVD and Blu-ray players.

Composite video is commonly used on TVs, VCRs, and other video
equipment.
Optical digital connections allow you to enjoy digital sound such
as PCM or Dolby Digital. The audio quality is the same as coaxial.
Note: The available sampling rate for PCM input signals is
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.

Coaxial digital audio

Orange
DIGITAL

Analog audio (RCA)

Coaxial digital connections allow you to enjoy digital sound such
as PCM or Dolby Digital. The audio quality is the same as optical.
Note: The available sampling rate for PCM input signals is
32/44.1/48/88.2/96 kHz. Even 176.4/192 kHz is effective in case of the
HDMI connection.

White

Red

Analog audio connections (RCA) carry analog audio.

Video connection formats

Notes
The AV receiver’s optical digital jacks have
shutter-type covers that open when an optical plug is
inserted and close when it’s removed. Push plugs in
all the way.

Video components can be connected by using any
one of the following video connection formats
(shown best first): HDMI, component video, or
composite video.
Video Signal Flow Chart

Caution

Blu-ray Disc, DVD player, etc.

To prevent shutter damage, hold the optical plug
straight when inserting and removing.

Deciding which connections to use

Composite

The receiver supports several connection formats
for compatibility with a wide range of AV
equipment. The format you choose depends on the
formats supported by your components. Use the
following sections as a guide.
•

•

The on-screen setup menus appear only on a TV
that is connected to the HDMI OUT. If your TV is
connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT, use the receiver’s
display when changing settings.
The on-screen setup menus are displayed when
there is no video input, or the video input is
480p, 720p, 1080i, or 1080p.

HDMI

MONITOR OUT
Composite

Notes

Component

HDMI

TV, projector, etc.

When choosing a connection format, bear in mind
that the receiver does not convert between formats,
so only outputs of the same format as the input will
output the signal.
Audio connection formats
Audio components can be connected by using any
of the following audio connection formats (shown
best first):
• HDMI
• Optical
• Coaxial
• Analog

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 9 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Using the audio return channel (ARC) function
The audio return channel (ARC) function lets an
HDMI-capable TV send the audio stream to the
receiver’s HDMI OUT jack. To use this function, you
must select the TV/CD input selector and your TV
must support the ARC function.

Audio Signal Flow Chart
Blu-ray Disc, DVD player, etc.
Analog

Coaxial

Optical

HDMI

Connecting external components

Note
OUT

Analog

HDMI
*1

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT jack. If your TV is
connected to the MONITOR OUT V jack or the
COMPONENT VIDEO OUT jack, use the receiver’s
display when changing settings.

TV, projector, etc.
*1 - Depends on the Audio TV Out setting.
*2 - This setting is available when the Audio Return Ch setting is
set to Auto. You must select the TV/CD input selector and your
TV must support the ARC function.

Receiver front

When choosing a connection format, note that the
receiver does not convert digital input signals for
analog line outputs and vice versa. For example,
audio signals connected to an optical or coaxial
digital input are not output by the analog VCR/DVR
OUT.
If signals are present at more than one input, the
inputs are selected automatically in the following
order of priority:
• HDMI
• Digital
• Analog
Receiver back

Connecting components with HDMI
VCR
or DVD recorder/Digital Video Recorder
VCR or DVD recorder/Digital Video Recorder

Game
console
Game
console

TV or projector

TV, projector, etc.

Satellite/cable
box,box
etc.
Satellite,
cable,set-top
or set-top

Blu-ray Disc/DVD
Disc/DVDplayer
player
Blu-ray

Connect your components to the appropriate jacks.
The default input assignments are shown below. To
change assignments, see “Setting up HDMI input
(HDMI Input menu)” on page 20.
Jack

Signal

Input

HDMI IN 1 Audio/Video
HDMI IN 2
HDMI IN 3
HDMI IN 4
Output HDMI OUT

Components

Assignable

Blu-ray disc/DVD player
VCR/DVR or DVR
Satellite, cable, set-top box
Game console
TV or projector

X
X
X
X

Connect your components to the appropriate jacks.
The default input assignments are shown below. To
change assignments, see “Setting up Component
input (Component menu)” on page 21.
No. Jack
1

Tip
To listen to audio received by the HDMI IN jacks
through your TV’s speakers:
• Set the TV Control setting to On for a
CEC-compatible TV.
• Set the Audio TV OUT setting to On when the TV
is not compatible with CEC or the TV Control
setting is Off.
• Set your Blu-ray Disc/DVD player’s HDMI audio
output setting to PCM.
• To listen to TV audio through the receiver, see
“Connecting external components” on page 9.

AUX INPUT

Signal
VIDEO

AUDIO L/R
OPTICAL
IN 1 (GAME)
IN 2 (TV/CD)
COAXIAL
IN 1 (BD/DVD)
COMPONENT IN 1 (BD/DVD) Component
VIDEO
video
IN 2 (CBL/SAT)
DIGITAL IN

www.insigniaproducts.com

OUT

Components

Composite
Camcorder
video
Analog audio
Digital audio Game console
TV or CD player
Blu-ray disc/DVD
player
Blu-ray disc/DVD
player
Satellite, cable,
set-top box
TV or projector

Assign.

X
X
X
X
X

NS-AV511_11-0201_MAN_.book Page 10 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

No. Jack

Signal

Composite
TV or projector
video
Analog audio Blu-ray disc/DVD
and composite player
video
VCR or DVD
recorder/Digital
Video recorder
Satellite, cable,
set-top box
Game console
Analog audio TV, CD player,
turntable*, cassette
tape player, MD,
CD-R

MONITOR OUT
BD/DVD IN

VCR/DVR IN

CBL/SAT IN
GAME IN
TV/CD IN

Components

Assign.

Notes
•
•

•

•
•
•

* Connect to a turntable (MM) that has a phono preamp built-in. If your
turntable (MM) does not have a built-in preamp, you will need a
commercially available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you will need a
commercially available MC head amp or MC transformer as well as a
phono preamp. See your turntable’s manual for details.

Notes
•
•
•
•

The receiver can output audio and video signals
from the AUX INPUT jacks to the VCR/DVR OUT
jacks.
With connection 2, you can enjoy Dolby Digital
and DTS.
With connection 4, if your Blu-ray Disc/DVD
player has both main stereo and multichannel
outputs, be sure to connect the main stereo.
With the connections described above, you
cannot record the video through the receiver. To
make a connection for video recording, see the
following section.

•

The AV receiver must be turned on for
recording. Recording is not possible while it’s in
Standby mode.
If you want to record directly from your TV or
playback VCR to the recording VCR without
going through the AV receiver, connect the
TV/VCR’s audio and video outputs directly to
the recording VCR’s audio and video inputs. See
the manuals supplied with your TV and VCR for
details.
Video signals connected to composite video
inputs can be recorded only via composite
video outputs. If your TV/VCR is connected to a
composite video input, the recording VCR must
be connected to a composite video output.
The surround sound and DSP listening modes
cannot be recorded.
Copy-protected Blu-ray discs and DVDs cannot
be recorded.
Sources connected to a digital input cannot be
recorded. Only analog inputs can be recorded.
DTS signals will be recorded as noise, so don’t
attempt analog recording of DTS CDs or LDs.

Connecting the power
To connect your receiver to power:
• Plug the power cord into an AC outlet.
AV Recording
Audio sources can be recorded to a recorder (such
as a cassette deck, CD-R, MD [MiniDisc]) connected
to the VCR OUT jacks. Video sources can be
recorded to a video recorder (such as a VCR or DVD
recorder) connected to the VCR/DVR Out jack.

Connecting recording components
To record audio and video from the same
source input

R
AUDIO
IN

VIDEO
IN

VCR,
DVD recorder,
tape deck,
VCR,
DVDcassette
recorder,
CDR, MD recorder, and similar.

cassette tape deck,

VCR or DVR Recorder, or
Cassette, CDR, or MD

VCR DVD

R
AUDIO
IN

VIDEO
IN

To record an audio source:
1 Use the input selector buttons to select the
source that you want to record. You can watch
the source while recording. The receiver’s
MASTER VOLUME control has no effect on
recording.
2 Start recording on your recorder.
3 On the source component, start playback. If you
select another input source during recording,
that input source is recorded.
Recording Separate AV Sources
You can record audio and video from completely
separate sources, allowing you to overdub audio
onto your video recordings. This function takes
advantage of the fact that when an audio-only
input source (TV/CD) is selected, the video input
source remains unchanged.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 11 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

In the following example, audio from the CD player
connected to the TV/CD IN jack and video from the
camcorder connected to the AUX INPUT VIDEO
jack are recorded by the VCR connected to the
VCR/DVR OUT jacks.
To record the audio from one source input and the
video from another source input
Camcorder

How can I use Rocketboost™ with my Surround Sound
Receiver?
A Rocketboost Wireless Card (RF-RBCARD - sold
separately) can be used to receive any Rocketboost
audio stream from your other Rocketboost
products. For example, you can play music from
audio sources that are in other rooms.
Plus, the RF-RBCARD can be used to send audio
from the NS-AV511. For example, you can connect
your rear surround sound speakers, or even
subwoofer, by using Rocketboost wireless instead
of wires. You can even send the front left/right
speaker audio signals to Rocketboost receivers in
other rooms of your house.
Both send and receive functions require additional
Rocketboost products. You can learn more about
Rocketboost products at www.rocketboost.com.
Typical Rocketboost applications
Wireless Surround Sound solution or
Wireless 2nd room audio solution

Send audio from MP3 or PC

CD player

RF-RBREC
Rocketboost Receiver
Amplifier

VCR

RF-RBUSB
Rocketboost
Sender

: Video signal
: Audio signal

NS-AV511
Surround sound receiver with RF-RBCARD

To record separate AV sources:
1 Prepare the camcorder and CD player for
playback and the VCR for recording.
2 Press the AUX input selector.
3 Press the TV/CD input selector. This selects the
CD player as the audio source, but leaves the
camcorder as the video source.
4 Start recording on the VCR and start playback
on the camcorder and CD player. The video from
the camcorder and the audio from the CD player
are recorded by the VCR.

NS-AV511

Wireless Subwoofer solution

RF-RBCARD
Rocketboost Wireless
Card

Wireless headphone solution

Rocketboost Setup
Rocketboost™ is expandable wireless digital audio.
• Products with Rocketboost™ technology let you
easily expand your listening experience
throughout your home.
• Rocketboost™ does not interfere with other
wireless products in your home.
• Rocketboost™ is uncompressed digital audio
compatible with all audio formats like Dolby
TrueHD and DTS-HD Master Audio used with
Blu-ray.

RF-RBWHP01 Rocketboost
Wireless Headphones

RF-RBUSB
Rocketboost
Sender/Receiver

When you see the Rocketboost logo on any
product, it has been designed to work with other
Rocketboost products, no matter who
manufactures them.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 12 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Initial Rocketboost setup
Insert the RF-RBCARD into the Rocketboost Module
Slot on the top of NS-AV511 receiver.

3 Press or to select Send Wireless Audio,
then press ENTER. The Send Audio menu opens.
Send Audio
Front
Surround
Subwoofer

< Enabled >
Enabled
Enabled

[< >] to Enable/Disable

4 Press or to select the Sender you want
(Front, Surround, or Subwoofer), then press
or to Enable or Disable the selected sender.
Setting up your surround sound receiver to send audio to
other Rocketboost receivers
Note
This is only required if you are using Rocketboost™
for your wireless surround sound, wireless subwoofer,
or if you are sending the front left/right speaker
audio signals to Rocketboost receivers in other
rooms of your house.

To set up your surround sound receiver to send
audio to other Rocketboost receivers:
1 Press SETUP. The Setup Menu opens.

Sender

Signal Status

Front Enabled
Front Disabled
Surround Enabled
Surround Disabled
Subwoofer Enabled
Subwoofer Disabled

Front is ON
Front is OFF
Surround signal is ON
Surround signal is OFF
Subwoofer signal is ON
Subwoofer signal is OFF

Note
•

Setup Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

HDMI Input
Component
Digital Audio
Sp Config
Sp Distance
Level Cal
Audio Adjust
Source Setup
Hardware
HDMI Setup
Rocketboost

•

Establishing communications with other Rocketboost
products
Note
Every Rocketboost™ network must contain a device
called a Hub, which directs network data traffic and
helps devices join the network. The network can
have only one hub. If you are setting up your network
for the first time, choose one of your Rocketboost™
senders to be your hub. If you already have a
Rocketboost™ network, then set the Hub (Manager)
setting in to Disable.

2 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub (Manager) Enable

To connect to a Rocketboost wireless network:
1 Press the Power button on your surround sound
receiver to turn it on.
2 Press SETUP. The Setup Menu opens.
Setup Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

The Front sender should be enabled if you want
to send the front left/right audio signals to other
Rocketboost receivers (for example
Rocketboost headphones or Rocketboost
receiver products in other rooms of your house.)
We recommend that you do not enable
channels that you will not be using.

www.insigniaproducts.com

HDMI Input
Component
Digital Audio
Sp Config
Sp Distance
Level Cal
Audio Adjust
Source Setup
Hardware
HDMI Setup
Rocketboost

NS-AV511_11-0201_MAN_.book Page 13 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

3 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub (Manager) Enable

• When successfully joined, the power indicator
LED on your other Rocketboost device will
stop blinking and stay on.
• If joining fails after 30 seconds, the display on
your surround sound receiver shows
“Timeout.” If this occurs, repeat the above
steps.
Listening to music from other Rocketboost™ products
To listen to music:
1 Press the Power button on your surround sound
receiver to turn it on.
2 Press SETUP. The Setup Menu opens.
Setup Menu

4 Press or to select Hub (Manager), then
press ENTER, then press or to select
Enable or Disable.
If you are setting up your network for the first
time, choose one of your Rocketboost senders
to be your hub. If you want the surround sound
receiver to be the hub then set the Hub
(Manager) setting in this menu to Enable.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

Hub Enable
Hub Status

< Enabled >

HDMI Input
Component
Digital Audio
Sp Config
Sp Distance
Level Cal
Audio Adjust
Source Setup
Hardware
HDMI Setup
Rocketboost

3 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub (Manager) Enable

[< >] to Enable/Disable

If you already have a Rocketboost network
established, set the Hub (Manager) setting in
this menu to Disable.
5 Press RETURN to go to the previous menu.
Note
Every new Rocketboost device you add to your
Rocketboost network must be “joined” to your
Rocketboost hub device. If the surround sound
receiver is the Hub of your network then repeat the
following steps for each of your Rocketboost devices
on your network.

4 Press or to select Listen to Wireless
Audio, then press ENTER. The Listen to Audio
menu opens.
Listen to Audio

6 If possible, bring your existing Rocketboost Hub
device, or the new Rocketboost device to which
you’d like to join, into the same room as the
soundbar.
7 Press the Power button on your other
Rocketboost device to turn it on.
8 Press and hold the Power button on your other
Rocketboost device for more than three seconds
to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in
joining mode for 30 seconds.
9 Press or to select Connect to Wireless
Network, then press ENTER.
10 The display on your surround sound receiver
shows “Connecting.” When connected to your
other Rocketboost device, the display shows
“Connected.”

RF-RBAUX(Audio In)

[Selected]

[ENTER] to Select

5 Press or to highlight the Rocketboost
device you want to listen to, then press ENTER
to select it.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 14 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Use the remote control within about 16 feet
(5 meters) of the receiver and within 30 degrees of
perpendicular to the front of the receiver.

Rocketboost Network Capabilities
The maximum number of Rocketboost devices in a
Rocketboost Network is nine. If you already have
nine and attempt to join an additional device,
joining will fail for the new device.

Cautions
•

Note
If you want to remove a device from your
Rocketboost network you need to rejoin it to a
different hub device (this basically creates a 2nd
Rocketboost network).

•
•

The maximum number of audio streams that can be
sent simultaneously on the Rocketboost network is
five (stereo CD quality).

Installing batteries in the remote control

Configuring speakers (Sp Config menu)

Cautions
•
•
•
•

Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a case,
change the angle of the lighting or receiver, or
operate the remote control closer to the remote
sensor window.

If the remote control doesn’t work reliably, try
replacing the batteries.
Don’t mix new and old batteries or different
types of batteries.
If you intend not to use the remote control for a
long time, remove the batteries to prevent
damage from leakage or corrosion.
Remove expired batteries as soon as possible to
prevent damage from leakage or corrosion.

This section explains how to specify which speakers
are connected and defines their sizes.
For speakers with a cone diameter larger than 6.5
inches (16 cm), specify Large (full band). For those
with a smaller diameter, specify Small (default
crossover 120 Hz).
The crossover frequency can be changed in the
Crossover submenu.
See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.

To install the batteries:
1 Remove the cover.

Note
Speaker Configuration, Crossover Frequency, and
Double Bass settings are disabled while headphones
are connected, or when Audio TV OUT is set to On.

Speaker(s)
Subwoofer

Batteries (AA/R6)

Front

2 Insert two AA batteries into the compartment
matching the polarity indicated.
3 Replace the cover.

Using the remote control
Use the remote control by pointing it towards the
receiver’s remote sensor window. Objects between
the remote control and sensor window may
prevent proper operation.

Center and Surround

Configuration
Yes–if a subwoofer is connected.
No–If no subwoofer is connected.
Small–If speaker cone is 6.5 inches (16 cm) or less in
diameter.
Large–If speaker cone is larger than 6.5 inches (16 cm)
in diameter.
Note: If the Subwoofer setting is No, the default setting
for this is Large and cannot be changed.
Small–If speaker cone is 6.5 inches (16 cm) or less in
diameter.
Large–If speaker cone is larger than 6.5 inches (16 cm)
in diameter.
None–If no center speaker is connected.
Note: If the Front setting is Small, the Large option
cannot be selected.

Remote control sensor
Receiver

Approx. 16 ft. (5 m)

Setting the crossover frequency (Crossover Frequency
submenu of Sp Config menu)
This setting is recommended for the speakers that
you specify as Small. To get the best bass
performance from your speaker system, you need
to set the crossover frequency according to the size
and frequency response of your speakers. Options
include 40Hz, 50Hz, 60Hz, 70Hz, 80Hz, 90Hz,
100Hz, 120Hz, 150Hz, and 200Hz.
Use the diameter of the smallest speaker in your
system when choosing the crossover frequency.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 15 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.

See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.
Speaker cone diameter

Recommended
Crossover Frequency

Over 8 in. (20 cm)
6-1/2 to 8 in. (16 to 20 cm)
5-1/4 to 6-1/2 in. (13 to 16 cm)
3-1/2 to 5-1/4 in. (9 to 13 cm)
Under 3-1/2 in. (9 cm)

40/50/60 Hz
70 Hz, 80 Hz, 90 Hz
100 Hz
120 Hz
150/200 Hz

Option

Configuration

Feet (default)–Distances can be set from 1 to 30
feet, in one foot increments.
Unit
Meters–Distances can be set from 0.3 to 9.0 meters,
in 0.3 meter increments.
Specify the distance from each speaker to your
Left, Center, Right,
Surround Right, Surround listening position.

Left, Subwoofer

Notes
•
•

Notes

For a more accurate setting, look up your
speaker’s specifications.
Choose a higher crossover frequency if you
want more sound from your subwoofer.

•
•

Using the Double Bass setting (Double Bass submenu of
Sp Config menu)

•

Lets you boost bass output by feeding bass sounds
from the front left, right, and center channels to the
subwoofer. Optional settings are On and Off.
Note

•

This function can only be set if the Subwoofer
setting is Yes, and the Front setting is Large.

Setting wireless (This setting appears only when
RF-RBCARD is inserted)
This menu is used if you are connecting your home
theater front left/right, surround, or subwoofer
channels using Rocketboost wireless (see
“Rocketboost Setup” on page 11 for more details
about Rocketboost).
The On menu option results in the wired and
wireless channels in your home theater to be
synchronized in time.
If any of these channels in your home theater are
connected with Rocketboost wireless, then set
those channels to On. For example, if you are using
Rocketboost for wireless surround sound and
wireless subwoofer in your home theater, then set
Wireless Sur and Wireless SW to On.
If you are using Rocketboost Wireless to send the
front left/right speaker audio signals to
Rocketboost receivers in other rooms of your
house, and not for your left/right home theater
speakers, then set Wireless Front to Off.
Option

Configuration

Wireless Front

On or Off

Wireless Sur

On or Off

Wireless SW

On or Off

The speaker distance setting is disabled while
headphones are connected, or when Audio TV
OUT is set to On.
Speakers that you set to No or None in the
speaker configuration (Sp Config menu) cannot
be selected.
The Center, Right, and Subwoofer distances can
be set up to 5 ft. (1.5 m) more or less than the
Left distance. For example, if the Left distance is
set to 20 ft. (6 m), the Center, Right, and
Subwoofer distances can be set between 15 and
25 ft. (4.5 and 7.5 m).
The Surround distances can be set up to 5 ft.
(1.5 m) more or 15 ft. (4.5 m) less than the Left
distance. For example, if the Left distance is set
to 20 ft. (6 m), the SurrRight and SurrLeft
distances can be set between 5 and 25 ft. (1.5
and 7.5 m).

Setting the level calibration (Level Cal menu)
Lets you adjust the level of each speaker with the
built-in test tone so that the volume of each
speaker is the same at the listening position.
See “Using on-screen setup menus” on page 20 for
information on accessing and using the menus.
Option

Configuration

Left, Center, Right,
Surround Right,
Surround Left

-12 dB to 0 dB to +12 dB, in 1 dB steps.

Subwoofer

-15 dB to 0 dB to +12 dB, in 1 dB steps.

Notes
•
•
•

The speaker level setting is disabled while
headphones are connected, or the receiver is
muted, or the Audio TV OUT setting is set to ON.
Speakers that you set to No or None in the
speaker configuration (Sp Config menu) cannot
be selected.
The center speaker and subwoofer level settings
made by using AUDIO are saved here as the
default settings.

Tip

Setting speaker distance (Sp Distance menu)
Lets you specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener’s ears as the sound
designer intended.

www.insigniaproducts.com

If you’re using a handheld sound level meter, adjust
the level of each speaker so that it reads 75 dB SPL at
the listening position, measured with C-weighting
and slow reading.

NS-AV511_11-0201_MAN_.book Page 16 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Operating your receiver

Notes
•

Turning your receiver on and off

•

To turn your receiver on and off:
1 Press ON/STANDBY on the front panel.
- OR Press RECEIVER, then ON/STANDBY on the
remote control.
The receiver turns on, the display lights, and the
STANDBY indicator turns off.
2 Press ON/STANDBY on the remote control
again. The receiver enters standby mode.
To prevent any loud surprises when you turn on
the receiver, always turn down the volume
before you turn it off.

Understanding basic operations
Notes
•

•

The on-screen setup menus appear only on a TV
that is connected to the HDMI OUT jack. If your
TV is connected to the MONITOR OUT V or the
COMPONENT VIDEO OUT jacks, use the
receiver’s display when changing settings.
This manual describes the procedure using the
remote control unless otherwise specified.

•

Using the music optimizer
The music optimizer enhances the sound quality of
compressed music files.
To use the music optimizer:
1 Press AUDIO, then press or to select
M.Optimizer.
2 Press or to select On.
The M.Opt indicator lights on the display.
Notes
•

Playing a connected component

•

To play a connected component:
1 Press RECEIVER, then press INPUT SELECTOR
buttons to select the input source.
2 Start playback on the source component.
3 To adjust the volume, use the MASTER
VOLUME control.
4 Select a listening mode and enjoy!
See also “Using the listening modes” on page
18.
Displaying source information
To display source information:
• Press RECEIVER, then press DISPLAY
repeatedly to cycle through the available
information.
The following information can typically be
displayed:

When AM or FM radio is used, the band, preset
number, and frequency are displayed.
If the input signal is analog, no format
information is displayed. If the input signal is
PCM, the sampling frequency is displayed. If the
input signal is digital but not PCM, the signal
format is displayed. Information is displayed for
about three seconds, then the previously
displayed information reappears.
The input source is displayed with the default
name even when you have selected a name. See
“Setting up HDMI (HDMI Setup menu)” on page
22.

The music optimizer function only works with
PCM digital audio input signals with a sampling
rate below 48 kHz and analog audio input
signals. The music optimizer is disabled when
the direct listening mode is selected.
The setting is stored individually for each input
selector.

Setting the display brightness
You can adjust the brightness of the receiver’s
display.
To set the display brightness:
• Press RECEIVER, then press DIMMER
repeatedly to select: Dim, Dimmer, or Normal
brightness.
Muting the receiver
To mute the receiver:
• Press RECEIVER, then press MUTING.
The output is muted and the MUTING indicator
flashes on the display.
Tip
•

Input source and volume

•

To unmute, press MUTING again or adjust the
volume.
Muting is also cancelled when the receiver is set
to Standby.

Using the sleep timer
With the sleep timer, you can set the receiver to turn
off automatically after a specified period.
To use the sleep timer:
• Press RECEIVER, then press SLEEP repeatedly
to select the sleep time you want.
The sleep time can be set from 90 to 10 minutes,
in 10 minute steps.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 17 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

The SLEEP indicator lights on the display when
the sleep timer has been set. The specified sleep
time appears on the display for about five
seconds, then the previous display reappears.
Tip
•
•

To cancel the sleep timer, press SLEEP
repeatedly until the SLEEP indicator goes off.
To check the time remaining until the receiver
turns off, press SLEEP. If you press SLEEP while
the sleep time is being displayed, the sleep time
is shortened by 10 minutes.

Using headphones
To use headphones:
• Connect a pair of stereo headphones with a
standard plug (1/4 in. or 6.3 mm) to the PHONES
jack.

Tip
You can also press the TUNE MODE and arrow
buttons on the remote control.

- OR • To manually tune to a station:
• Press TUNING MODE until the AUTO
indicator goes off.
• Press and hold TUNING or . The
receiver tunes up or down the frequency
band as long as you hold the button. Press
the button repeatedly to tune up or down
by steps.
Tip
•
•

Tip
•
•
•
•

Always turn down the volume before
connecting your headphones.
While the headphones plug is inserted in the
PHONES jack, the speakers are turned off.
When you connect a pair of headphones, the
listening mode is set to Stereo, unless it is
already set to Stereo, Mono, or Direct.
The listening modes cannot be selected while a
pair of headphones is connected.

Listening to your receiver

•

In Manual Tuning mode, FM stations are in
mono.
If the signal from a stereo FM station is weak, it
may be impossible to get good reception. In this
case, switch to Manual Tuning mode and listen
to the station in mono.
You can also press the TUN MODE and arrow
buttons on the remote control.

- OR • To tune to a station by entering the frequency:
• Using the remote control, press TUNER
repeatedly to select AM or FM, then press
D.TUN.

Important
The procedures described in this section use the
buttons on the front panel, unless otherwise
specified.

Listening to the radio
With the built-in tuner you can enjoy AM and FM
radio stations. You can store your favorite stations
as presets for quick selection.
To listen to the radio:
• Press TUNER to select either AM or FM (each time
you press TUNER, the radio band changes
between AM and FM).
In this example, FM has been selected.
Band

Frequency

• To automatically tune to a station:
• Press TUNING MODE until the AUTO
indicator appears on the display.
• Press TUNING or . The receiver
automatically searches for stations and
stops when a station is found.
FM Stereo

• Within eight seconds, press the number
buttons to enter the frequency of the radio
station you want. For example, to tune to
87.50, press 8, 7, then 5.

Presetting FM or AM stations
You can store a combination of as many as 40 of
your favorite AM or FM stations as presets.
To store a station as a preset:
1 Tune to the FM or AM station that you want to
store as a preset. See “Listening to the radio” on
page 17 for information on tuning your receiver.
2 Press MEMORY. The preset number flashes.
3 While the preset number is flashing (about eight
seconds), press PRESET or to select a
preset number from one through 40.
4 Press MEMORY again to store the station or
channel. The station or channel is stored and the
preset number stops flashing.
5 Repeat steps 1 through 4 to preset your favorite
radio stations.
Tuning to a preset station
To tune to a preset station:
• To select a preset, press PRESET or on
the receiver, or press CH +/– on the remote
control.
Tip

AUTO
TUNED

www.insigniaproducts.com

You can also press the number buttons on the
remote control to select a preset station directly.

NS-AV511_11-0201_MAN_.book Page 18 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Deleting preset stations
To delete a preset station:
1 Select the preset you want to delete.
2 Press TUNING MODE while pressing and
holding MEMORY. The preset is deleted and its
number disappears from the display.

Using the listening modes
Notes
•

•

•
•

You can only select the Dolby Digital and DTS
listening modes if your Blu-ray Disc/DVD player
is connected to the receiver with a digital audio
connection (coaxial, optical, or HDMI).
The listening mode you can select depends on
the format of the input signal. To check the
format, see “Displaying source information” on
page 16.
You can only select Mono, Direct, and Stereo
listening modes with a pair of headphones is
connected.
Listening modes cannot be selected while a pair
of headphones is connected.

The receiver’s listening modes can transform your
listening room into a movie theater or concert hall,
with high fidelity and stunning surround sound.
The following audio formats are supported by the
listening modes:
• MONO–This is mono (monophonic) sound. All the
audio signals are mixed and reproduced through
a single speaker.
• STEREO–This is stereo (stereophonic) sound. Two
independent audio signal channels are
reproduced through two speakers.

• 5.1ch–This is 5.1-channel surround sound. This
receiver has five main channels of sound and a
sixth subwoofer channel (called the point-one
channel).
• 7.1ch–This is 7.1-channel surround sound. This is
a further sound enhancement to 5.1 channel
sound with two additional speakers that provide
greater sound envelopment and more accurate
positioning of sounds. The receiver outputs this
source in 5.1-channel surround sound.
Selecting a listening mode
To select a listening mode:
• Press one of the following buttons. If you are
using the remote control, press the RECEIVER
button first. See “Listening modes” on page 18,
and “Insignia-Original Listening Modes” on page
19 for information on listening modes.
• MOVIE/TV–This button selects the listening
modes intended for use with movies and TV.
• MUSIC–This button selects the listening
modes intended for use with music.
• GAME–This button selects the listening
modes intended for use with video games.
• STEREO–This button selects the Stereo
listening mode and All Channel Stereo
listening mode.
Listening modes
These listening modes become available when one
of the buttons described in “Selecting a listening
mode” on page 18 are pushed. The optional modes
available depend on which button is pushed.
Input
Source

Listening Mode

Description

Direct (Direct)

In this mode, audio from the input source is output without surround-sound processing. The “Sp Config (Speaker
Configuration)” (presence of speakers), “Sp Distance (Speaker Distance)” and “A/V Sync (A/V Sync)” settings are enabled,
but much of the processing set via AUDIO is disabled. See “Using advanced setup” on page 20 for more details.
Sound is output by the front left and right speakers and subwoofer.

Stereo (Stereo)

Mono (Mono)
Multichannel
(Multich)

Use this mode when watching an old movie with a mono soundtrack, or use it with the foreign language soundtracks
recorded in the left and right channels of some movies. It can also be used with DVDs or other sources containing
multiplexed audio, such as karaoke DVDs.
This mode is for use with PCM multichannel sources.

Dolby Pro Logic II expands any 2-channel source for 5.1-channel playback. It provides a very natural and seamless
surround-sound experience that fully envelops the listener. As well as music and movies, video games can also benefit from
Dolby Pro Logic II the dramatic spatial effects and vivid imaging.
(PL II Movie)
• Dolby PLII Movie–Use this mode with DVDs and videos that bear the Dolby Surround logo or TV shows that feature
(PL II Music)
Dolby Surround. You can also use this mode with stereo movies or TV shows and the receiver creates a 5.1 surround
mix from the 2-channel stereo.
(PL II Game)
• Dolby PLII Music–Use this mode to add 5.1 surround to stereo sources such as music CDs and DVDs.
• Dolby PLII Game–Use this mode when playing game discs.
In this mode, audio from the input source is output without surround-sound processing.
Dolby Digital
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
(Dolby D)
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.
Dolby Digital In this mode, audio from the input source is output without surround-sound processing.
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
Plus1
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.
(Dolby D+)

www.insigniaproducts.com

MONO
STEREO
5.1ch
7.1ch
MONO
STEREO
5.1ch
7.1ch
MONO
STEREO
5.1ch
7.1ch
5.1ch
7.1ch

Speaker Layout
2.1, 3.1, 5.1

2.1, 3.1, 5.1

3.1, 5.1

STEREO

3.1, 5.1

5.1ch

3.1, 5.1

5.1ch
7.1ch

3.1, 5.1

NS-AV511_11-0201_MAN_.book Page 19 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Description

Input
Source

Speaker Layout

Dolby TrueHD
Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance), 7.1ch
(Dolby TrueHD) Sp
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.

In this mode, audio from the input source is output without surround-sound processing.

5.1ch

3.1, 5.1

In this mode, audio from the input source is output without surround-sound processing.
5.1ch
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.
5.1ch
DTS-HD High In this mode, audio from the input source is output without surround-sound processing.
Resolution Audio Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance), 7.1ch
(DTS-HD HR) A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.

3.1, 5.1

Listening Mode

DTS (DTS)

5.1ch
DTS-HD Master In this mode, audio from the input source is output without surround-sound processing.
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance), 7.1ch
Audio
(DTS-HD MSTR) A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.

DTS Express
(DTS Express)
DSD2
(DSD)
DTS 96/243
(DTS 96/24)

3.1, 5.1

In this mode, audio from the input source is output without surround-sound processing.
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.
In this mode, audio from the input source is output without surround-sound processing.
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See “Using advanced setup” on page 20.
This mode is for use with DTS 96/24 sources. This is high-resolution DTS with a 96 kHz sampling rate and 24-bit resolution,
providing superior fidelity. Use it with DVDs that bear the DTS 96/24 logo.

STEREO
5.1ch

3.1, 5.1

5.1ch

3.1, 5.1

5.1ch

3.1, 5.1

This mode expands any 2-channel source for up to 5.1-channel playback. It uses seven full-bandwidth channels of matrix

STEREO

3.1, 5.1

decoding for matrix-encoded material, providing a very natural and seamless surround sound experience that fully envelops
DTS Neo:6
(Neo : 6Cinema) the listener.
• Neo:6 Cinema–Use this mode with any stereo movie (such as TV, DVD, VHS).
(Neo : 6Movie)
• Neo:6 Music–Use this mode with any stereo music source (such as CD, radio, cassette, TV, VHS, DVD).
1
Dolby Digital is used for Blu-ray discs.
2
The receiver can use the DSD signal from HDMI IN. Setting the output on the player side to PCM might provide better sound to the player.
3

Depending on the input source, DTS is used.

Insignia-Original Listening Modes
Listening Mode

Description

Input Source Speaker Layout

MONO
STEREO
5.1ch
Suitable
for
acoustic
instruments,
vocals,
and
jazz,
this
mode
emphasizes
the
front
stereo
image,
giving
the
impression
MONO
Unplugged of being right in front of the stage.
STEREO
(Unplugged)
5.1ch
Suitable
for
rock
or
pop
music,
listening
to
music
in
this
mode
creates
a
lively
sound
field
with
a
powerful
acoustic
MONO
Studio-Mix
image, like being at a club or rock concert.
STEREO
(Studio-Mix)
5.1ch
This
mode
adds
realistic
acoustics
to
TV
shows
produced
in
a
TV
studio,
surround
effects
to
the
entire
sound,
and
clarity
MONO
TV Logic
to voices.
STEREO
(TV Logic)
5.1ch
Use
this
mode
when
playing
role
playing
game
discs.
MONO
Game-RPG
STEREO
(Game - RPG)
5.1ch
Use
this
mode
when
playing
action
game
discs.
MONO
Game-Action
STEREO
(Game - Action)
5.1ch
MONO
Game-Rock Use this mode when playing rock game discs.
STEREO
(Game - Rock)
5.1ch
Use
this
mode
when
playing
sports
game
discs.
MONO
Game-Sports
STEREO
(Game - Sports)
5.1ch
Ideal for background music, this mode fills the entire listening area with stereo sound from the front, surround, and MONO
All Ch Stereo surround back speakers.
STEREO
5.1ch
(All Ch St)
7.1ch

Orchestra
(Orchestra)

Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo
image, and simulates the natural reverberation of a large hall.

www.insigniaproducts.com

5.1

3.1, 5.1

NS-AV511_11-0201_MAN_.book Page 20 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Listening Mode

Description

Input Source Speaker Layout

In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you MONO
are within the listening room.
STEREO
5.1ch
7.1ch
With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works by controlling MONO
how sounds reach the listener’s left and right ears. Good results may not be possible if there is too much reverb, so we STEREO
recommend that you use this mode in an environment with little or no natural reverb.
5.1ch
7.1ch

Full Mono
(Full Mono)
T-D (TheaterDimensional)
(T-D)

3.1, 5.1

2.1, 3.1, 5.1

Speaker layout
The following shows the speakers that are activated
in each type of configuration.
2.1ch
Z

3.1ch
X

5.1ch
C

c
d

a - Front speakers
b - Center speaker
c - Subwoofer
d - Surround speakers

Using advanced setup

5 Press RETURN to return to the main menu.
Tip
You can also performed these changes on the
receiver by pressing SETUP, the arrow buttons, then
ENTER.

Using on-screen setup menus
On-screen setup menus appear on the connected
TV and provide a convenient way to change the
receiver’s various settings. Settings are organized
into nine categories on the main menu.
You can change the settings by using the on-screen
display.
To use the on-screen setup menus:
1 Press RECEIVER, then press SETUP. The Setup
menu opens.

Setting up HDMI input (HDMI Input menu)
If you connect a video component to HDMI inputs,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD
player to HDMI IN 2, you must assign HDMI2 to the
BD/DVD input selector.
Here are the default assignments:
Input selector Default assignment
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD

Setup Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

HDMI Input
Component
Digital Audio
Sp Config
Sp Distance
Level Cal
Audio Adjust
Source Setup
Hardware
HDMI Setup
Rocketboost

HDMI1, HDMI2, HDMI3, HDMI4–Select the HDMI
input to which the video component has been
connected.
- - - - -–Select if you’re not using the HDMI OUT.

Tip
If the main menu doesn’t appear, make sure the
appropriate external input is selected on your TV.

2 Press or to select a menu, then press
ENTER.
3 Press or to select an option, then press
or to change the setting.
4 Press SETUP to close the menu.

HDMI1
HEMI 2
HDMI3
HDMI4
----------------

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 21 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

- - - - -–Select if you are using an analog audio input.

Each HDMI input can only be assigned to a single
input selector. When HDMI1 - HDMI4 have already
been assigned, you must first set unused input
selectors to “- - - - -,” or you cannot assign HDMI1 HDMI4 to an input selector.

Notes
•

•

When an HDMI IN is assigned to an input
selector as explained here, the digital audio
input for that input selector is automatically set
to the same HDMI IN.
Do not assign the component connected with
the HDMI input to a TV/CD selector when you
set the TV Control setting to On. Otherwise, the
appropriate CEC (Consumer Electronics Control)
operation can not be guaranteed.

Setting up Component input (Component
menu)

•

Adjusting the audio (Audio Adjust menu)
With the audio adjust settings you can adjust the
sound and listening modes to your taste.
Setting the Multiplex (Input Ch(Mux) submenu) and
Mono (Input Ch(Mono) submenu)
The multiplex setting determines which channel of
a stereo multiplex source is output. Use it to select
audio channels or languages with multiplex
sources, multilingual TV broadcasts, and so on.
The mono setting specifies the channel to be used
for playing any 2-channel digital source, such as
Dolby Digital, or 2- channel analog/PCM source in
the Mono listening mode.

If you connect a video component to a component
video input, you must assign that input to an input
selector. For example, if you connect your Blu-ray
Disc/DVD player to COMPONENT VIDEO IN 2, you
must assign IN2 to the BD/DVD input selector.
Here are the default assignments:
Input selector Default assignment
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD

IN1
-----IN2
---------------------

Option
Multiplex

Mono

IN1, IN2–Select the component input to which the
video component has been connected.
- - - - -–Select if you’re not using the COMPONENT
VIDEO OUT.

Setting up Digital Audio (Digital Audio menu)
If you connect a component to a digital audio input,
you must assign that input to an input selector. For
example, if you connect your CD player to the
OPTICAL IN 1, you must assign OPT1 to the TV/CD
input selector.
Here are the default assignments:
Input selector Default assignment
BD/DVD
VCR/DVR
CBL/SAT
GAME
AUX
TUNER
TV/CD

COAX
----------OPT1
-----OPT2
------

When an HDMI IN is assigned to an input
selector as explained here, the digital audio
input for that input selector is automatically set
to the same HDMI IN. In addition to the usual
inputs, such as COAX, you can also select HDMI
inputs.
The available sampling rate for PCM signals
from a digital input (optical and coaxial) is
32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

Settings
Main (default)–The main channel is output.
Sub–The sub channel is output.
M/S–Both the main and sub channels are output.
L+R–Both the left and right channels are output.
Left–Only the left channel is output.
Right–Only the right channel is output.

Setting the Dolby options (Panorama, Dimension, and
Center Width submenus)
These settings only apply to 2-channel stereo
sources.
The Panorama setting lets you broaden the width
of the front stereo image when using the Dolby Pro
Logic II Music listening mode.
The Dimension setting lets you move the sound
field forward or backward when using the Dolby
Pro Logic II Music listening mode. Higher settings
move the sound field backward. Lower settings
move it forward. If the stereo image feels too wide,
or there’s too much surround sound, move the
sound field forward to improve the balance.
Conversely, if the stereo image feels like it’s in
mono, or there’s not enough surround sound, move
it backward.

COAX, OPT1, OPT2–Select the digital audio input
to which the video component has been
connected.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 22 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

The Center Width setting lets you adjust the width
of the sound from the center speaker when using
the Dolby Pro Logic II Music listening mode.
Normally, if you’re using a center speaker, the center
channel sound is output by only the center speaker.
(If you’re not using a center speaker, the center
channel sound is distributed to the front left and
right speakers to create a phantom center). This
setting controls the front left, right, and center mix,
allowing you to adjust the weight of the center
channel sound.
Submenu

Configuration

Dimension

On– Turns the Panorama function on.
Off–Turns the Panorama function off.
–3 to 0 to +3

Center Width

0 to 3 to 7

Panorama

Setting the DTS options (Center Image submenu)
The DTS Neo:6 Music listening mode lets you create
6-channel surround sound from 2-channel stereo
sources. With this setting, you can specify by how
much the front left and right channel output is
attenuated in order to create the center channel.
A value 0 is only audible from the center speaker. A
value of more than 0 is audible from the left and
right speakers as well.
Submenu

Configuration

Center Image

0 to 2 (default) to 5

Setting up HDMI (HDMI Setup menu)
Submenu

Configuration

Off (default)–CEC disabled.
On–CEC enabled.
Off (default)–HDMI Through is off.
Auto–Detects the signal and automatically selects
the input source.
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD–
HDMI Through
Selects the input source for which the HDMI Through
function is enabled.
Last–The HDMI Through function is activated on the
input source selected when the AV receiver is set to
Standby mode.
Off (default)–HDMI audio is not output.
Audio TV OUT
On–HDMI audio is output.
Off–Select if you don’t want to use audio return
channel (ARC) function.
Audio Return Ch (ARC)
Auto (default)–The audio signal from your TV tuner
can be sent digitally to the HDMI OUT of the receiver.
On (default)–Lip sync enabled.
LipSync
Off–Lip sync disabled.

CEC Function

CEC Function (HDMI Control submenu)
This function lets CEC-compatible components
connected via HDMI to be controlled by the
receiver.
Notes
•

•

Adjusting the Theater-Dimensional setting (Listening
Angle submenu)

•

This setting lets you optimize the
Theater-Dimensional listening mode by specifying
the angle of the front left and right speakers relative
to the listening position. Ideally, the front left and
right speakers should be equidistant from the
listening position and at an angle close to one of
the two available settings.

•
•
•

HDMI Through

20°/40°

• Off (default)–HDMI Through is off.
• Auto–Detects the signal and automatically
selects the input source.
• BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD– Selects the input source for which the
HDMI Through function is enabled.
• Last–The HDMI Through function is activated on
the input source selected when the AV receiver is
set to Standby mode.

Submenu

Options

Listening Angle

Wide (default)–The listening angle is 40 degrees.
Narrow–The listening angle is 20 degrees.

When set to On, the name of connected
CEC-compatible components and CEC On are
displayed on the receiver when the menu is
closed.
When set to Off, CEC Off is displayed on the
receiver when the menu is closed.
When a CEC-compatible component is
connected to the receiver via HDMI cable, the
name of the connected component is displayed
on the receiver. For example, when you are
watching TV, if you turn on a Blu-ray Disc/DVD
player by the receiver’s remote control, the
name of the Blu-ray Disc/DVD player is
displayed on the receiver.
Set to Off when a connected piece of
equipment is not compatible or it is unclear
whether the equipment is compatible or not.
If movement is unnatural when set to On,
change the setting to Off.
Refer to the connected component’s instruction
manual for details.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 23 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

When enabling the HDMI Through function,
regardless of whether the AV receiver is On or in
Standby, both the audio and video streams from an
HDMI input will be output to the TV or other
components via the HDMI connection. The HDMI
THRU and HDMI indicators light when this is
enabled. This setting is set to Auto automatically
when the above CEC Function is set to On.

• To disable, set to OFF.
Notes
•
•

This function only works if your
HDMI-compatible TV supports HDMI Lip Sync.
You can check the amount of delay being
applied by the HDMI Lip Sync function on the
A/V Sync screen.

Changing audio settings

Notes
•
•

•
•
•

Only the input source assigned to the HDMI IN
via “HDMI Input” is enabled.
The power consumption during standby mode
will increase when the HDMI Through function
is turned on, however, in the following cases,
the power consumption does not increase:
• The TV is in standby mode.
• You are watching a TV program.
Refer to the connected component’s instruction
manual for details.
Depending on the connected component, the
correct input source may not be selected with
the setting set to Auto.
This setting is set to Off automatically when CEC
Function is set to Off.

You can change various audio settings by pressing
HOME on the remote control.
Note
When Audio TV OUT is set to On, the HOME button
is disabled.

To change audio settings:
1 Press RECEIVER on the remote control, then
press HOME.
2 Press or to select an option, then press
or to change the setting. Repeat this step
to change additional settings.
Changing tone control settings

Audio TV OUT (Audio TV Out submenu)

You can adjust the bass and treble for the front
speakers, except when the Direct Listening mode is
selected. Options include:
• Bass–You can boost or cut low-frequency
sounds output by the front speakers. 10 dB to
0 dB to +10 dB, in 2 dB steps
• Treble–You can boost or cut high-frequency
sounds output by the front speakers. 10 dB to
0 dB to +10 dB, in 2 dB steps

This setting determines whether audio received by
HDMI IN is output by the HDMI OUT. You may want
to turn this preference on if your TV is connected to
the HDMI OUT and you want to listen to the audio
from a component that’s connected to an HDMI IN,
through your TV’s speakers. Normally, this should
be set to Off.
Notes
•
•
•
•
•

If On is selected and the signal can be output by
the TV, the receiver outputs no sound through
its speakers.
If On is selected, TV Sp On appears on the
display when you press DISPLAY.
When TV Control is set to On, this setting
default is Auto.
With some TVs and input signals, no sound may
be output, even when this setting is On.
When the Audio TV OUT or TV Control are set
to On, and you are listening through your TV’s
speakers, if you turn up the receiver’s volume
control, the sound is output by the receiver’s
front left and right speakers. To stop the
receiver’s speakers from producing sound,
change the settings, change your TV’s settings,
or turn down the receiver’s volume.

Notes
•
•

Note

Changing the speaker levels
You can adjust the volume of each speaker while
listening to an input source. These temporary
adjustments are cancelled when the receiver is set
to Standby. To save the setting you made here, go
to “Setting the level calibration (Level Cal menu)”
on page 15, before returning the receiver to
Standby. Options include:
• Subwoofer–15 dB to 0 dB to +12 dB, in 1 dB
steps.
• Center–12 dB to 0 dB to +12 dB, in 1 dB
steps.

Audio Return Ch (ARC)(Audio Return Ch submenu)
The audio return channel (ARC) function enables an
HDMI 1.4-capable TV to send the audio stream to
the HDMI OUT jack of the receiver. To use this
function, you must select the TV/CD input and your
TV must support the ARC function.

Notes
•

Notes
•
•

To bypass the bass and treble tone circuits,
select the Direct listening mode.
This procedure can also be performed on the
receiver by pressing the TONE–/+ buttons.

•

The Audio Return Ch setting can only be set
when HDMI Control is On.
This setting is set to Auto automatically when
HDMI Control is set to On first time.

You cannot use this function while the receiver
is muted.
Speakers that are set to No or None in the Sp
Config (Speaker Configuration) submenu
cannot be adjusted.

Note

LipSync (LipSync submenu)
Lets you set the receiver to automatically correct
any delay between the video and the audio, based
on the data from the connected monitor.
• To enable, set to ON.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 24 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Setting the A/V Sync

Setting the Late Night function
The Late Night function lets you reduce the
dynamic range of Dolby Digital material so that you
can still hear quiet parts even when listening at low
volume levels. This makes it ideal for watching
movies late at night when you do not want to
disturb anyone. Options are:
• For Dolby Digital and Dolby Digital Plus sources,
the options are Off, Low, and High.
• For Dolby TrueHD sources, the options are Auto,
Off, and On.
Notes
•

•
•

The effect of the Late Night function depends
on the material that you are playing and the
intention of the original sound designer. With
some material there is little or no effect when
you select the different options.
The Late Night function can only be used when
the input source is Dolby Digital, Dolby Digital
Plus, or Dolby TrueHD.
The Late Night function is set to Off when the
receiver is set to Standby. For Dolby TrueHD
sources, it is set to Auto.

When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and
sound are out of sync. With this setting, you can
correct this by delaying the audio signals. Option
settings are from -400 ms to 400 ms, in 10 ms steps.
Notes
•
•

Naming inputs (Name Edit menu)
You can enter a preset name for each individual
input selector for easy identification. When entered,
the preset name appears on the display.
Before selecting a name, press the input selector to
select the input source to name.
Submenu

Options

Name Edit

- - -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo,
CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD,
TAPE, and iPod.
To reset to the default, select - - -.

Setting the Music Optimizer
The Music Optimizer function enhances the sound
quality of compressed music files. Use it with music
files that use “lossy” compression, such as MP3.
Options are Off and On.

Notes
•

Notes

•
•

The Music Optimizer function only works with
PCM digital audio input signals with a sampling
rate below 48 kHz and analog audio input
signals. The Music Optimizer is disabled when
the Direct listening mode is selected.
The setting is stored individually for each input
selector.
When the Music Optimizer is on, the M.OPT
indicator lights.

Setting the CinemaFILTER
The CinemaFILTER lets you soften overly bright
movie soundtracks, which are typically mixed for
reproduction in a movie theater.
CinemaFILTER can be turned On or Off for the
following listening modes:
• Dolby Digital
• Dolby Digital Plus
• Dolby TrueHD
• Dolby Pro Logic II Movie
• Multichannel
• DTS
• DTS Neo:6 Cinema
• DTS 96/24
• DTS-HD High Resolution
• DTS-HD Master
• DTS Express.

Two different inputs cannot have the same
name.
This menu cannot be used for the TUNER input
selector.

Setting the Audio Selector
You can set priorities of audio output when there
are both digital and analog inputs. Options include:
• ARC–The audio signal from your TV tuner can
be sent digitally to the HDMI OUT of the
receiver. With this selection, the TV’s audio can
automatically be selected as a priority.
• HDMI–This can be selected when HDMI IN
has been assigned as an input source. If both
HDMI (HDMI IN) and digital audio inputs
(COAXIAL IN or OPTICAL IN) have been
assigned, HDMI input is automatically
selected.
• COAX–This can be selected when COAXIAL IN
has been assigned as an input source. If both
coaxial and optical inputs have been assigned,
coaxial input is automatically selected.
• OPT–This can be selected when OPTICAL IN
has been assigned as an input source.
• Analog–The receiver always outputs analog
signals.
Notes
•
•

Notes
The CinemaFILTER may not work with some input
sources.

•

A/V Sync is disabled when the Direct listening
mode is used with an analog input source.
The setting is stored individually for each input
selector.

www.insigniaproducts.com

The setting is stored individually for each input
selector.
This setting can be made only for the input
source that is assigned as HDMI IN, COAXIAL IN,
or OPTICAL IN. If both HDMI (HDMI IN) and
digital audio inputs (COAXIAL IN or OPTICAL IN)
are assigned, HDMI input is selected as a priority
by setting to ARC. To select the digital audio
input, see “Setting up Digital Audio (Digital
Audio menu)” on page 21.
You can select ARC if you select the TV/CD input
selector. But you cannot select it if you have
selected Off in the Audio Return Ch setting.

NS-AV511_11-0201_MAN_.book Page 25 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Selecting a digital input signal format (Fixed
Mode)
The digital input signal formats are available only
for the input sources that you have assigned a
digital input jack.
Normally, the receiver detects the signal format
automatically. However, if you experience any
issues when playing PCM or DTS material, you can
manually set the signal format to PCM or DTS.
Notes
•
•
•
•

If the beginnings of tracks from a PCM source
are cut off, try setting the format to PCM.
If noise is produced when fast forwarding or
reversing a DTS CD, try setting the format to
DTS.
The setting is stored individually for each input
selector.
The setting is reset to Off when you change the
setting in the Audio Selector.

• Off–The format is detected automatically. If no
digital input signal is present, the
corresponding analog input is used instead.
• PCM–Only 2-channel PCM format input
signals are heard. If the input signal is not
PCM, the PCM indicator flashes and noise may
also be produced.
• DTS–Only DTS (but not DTS-HD) format input
signals is heard. If the input signal is not DTS,
the DTS indicator flashes and there is no
sound.
OSD Setting
Volume OSD
• On
• Off
Select On when you want to display the volume
level on-screen when it is adjusted.
Auto Standby
Auto Standby
• On
• Off
When Auto Standby is set to On, the Surround
Sound Receiver automatically returns to Standby
when no audio or video signal is received for 30
minutes.
Note
The Auto Standby function may activate during
playback of some source.

Controlling other
components
You can use your receiver’s remote control to
control your other AV components. This section
explains how to enter the remote control code for a
component that you want to control, such as a DVD
player, a TV, or a CD player. See “Remote control
codes” on page 26.

Preprogrammed remote control codes
Remote control codes for Insignia Blu-ray disc
players and Insignia TVs are preprogrammed into
the remote control. You do not need to enter a
remote control code to control these components.
To enter remote control codes:
1 While holding down the REMOTE MODE button
to which you want to enter a code, press and
hold down the DISPLAY button until the
Remote indicator lights up (about three
seconds).
2 Within 30 seconds, press the number buttons to
enter the 5-digit remote control code. The
Remote indicator flashes twice.
To reset a REMOTE MODE button:
1 While holding down the REMOTE MODE button
that you want to reset, press and hold HOME
until the Remote indicator lights (about three
seconds).
2 Within 30 seconds, press the REMOTE MODE
button again.
The Remote indicator flashes twice, indicating
that the button has been reset.
Each REMOTE MODE button is preprogrammed
with a remote control code. When a button is
reset, its preprogrammed code is restored.
To reset the remote control:
1 While holding down the RECEIVER button,
press and hold HOME until the Remote
indicator lights (about three seconds).
2 Within 30 seconds, press the RECEIVER button
again.
3 The Remote indicator blinks twice, indicating
that the remote control has been reset.
To control other components:
• Press the REMOTE MODE button that you have
programmed with the remote control code for
your component.

www.insigniaproducts.com

NS-AV511_11-0201_MAN_.book Page 26 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Using the remote control to control other
components
Press the REMOTE MODE button for the
component you want to control first.

Remote control codes
Insignia Receiver

Default
Tuner

62472
52472

Cable Set Top Box

# Button/
Component
1
2
3
4
5

6
7
8

9
10
11
12
13
14
15

DVD
VCR/
player/ Blu-ray
disc player PVR
recorder

X
X
|/ ON/STANDBY X
Input selector
X
These buttons can control the TV, regardless of the mode selected.
TOP MENU
X
ENTER
X
X
X
/ /
/
SETUP
X
X
/ / / / X
/
/
SEARCH
X* X
X*
REPEAT
X* X
X*
RANDOM
X* X
X*
MODE
X* X
X*
Numbers
X
X
X
DISPLAY
X
X
X
MUTING
X
X
X
MENU
X
RETURN
X
X
X
HOME
X
X
CLR
X
X
X

Satellite/
Cable
receiver
X

01376, 01877
01376, 01877
01006, 01376, 01877
01376, 01877
01877, 01982
01376, 01877, 01982
01376, 01877
01187
01376, 01877
01877
01376, 01877
01187, 01376, 01982
01376, 01877, 01982
01982
01877
01877
01877
01376
01006
01376, 01877
01376, 01877
01877

Cable/PVR Combination
X
X*
X*
X*
X*
X
X
X
X
X
X

Note
Certain buttons may not work as expected with some
components, and some may not work at all.

Bright House
Cable One
Cablevision
Charter
Cisco
Comcast
Cox
Digeo
Insight
Knology
Mediacom
Motorola
Pace
Panasonic
Pioneer
Rogers
Scientific Atlanta
Shaw
Sony
Suddenlink
Time Warner
WideOpenWest

Bright House
Cable One
Cablevision
Charter
Cisco
Comcast
Cox
Digeo
Insight
Knology
Mediacom
Motorola
Pace
Panasonic
Pioneer
Rogers
Scientific Atlanta
Shaw
Sony
Suddenlink
Time Warner
Tivo
WideOpenWest

www.insigniaproducts.com

01376, 01877
01376, 01877
01006, 01376, 01877
01376, 01877, 02187
01877, 01982
01376, 01877, 01982, 02576
01376, 01877
01187, 02187
01376, 01877
01877
01376, 01877
01376, 01187
01877
01982
01877
01877
01877
01376
01006
01376, 01877
01376, 01877, 02187
02576
01877

NS-AV511_11-0201_MAN_.book Page 27 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

CD
Denon
DKK
Insignia
Miro
Optimus
Pioneer
RCA
Sony
Yamaha

SAT/PVR Combination
72222
70000
72585
70000
70000, 70468
70468
70468
70000
70036

DirecTV
Dish Network
Dishpro
Echostar
Expressvu
Hughes Network Systems
Motorola
Philips
Samsung
Sony
Star Choice
Tivo

CD-R
Sony

70000

Television

Accessory
Insignia
AT&T
Cisco
Motorola
Scientific Atlanta
Verizon

82587
00858
02345
00858, 02378
00858, 02345
02378

Satellite Set Top Box
Bell ExpressVu
DirecTV
Dish Network
Dishpro
Echostar
Expressvu
GE
General Instrument
GOI
HTS
Hughes Network Systems
Jerrold
JVC
Mitsubishi
Motorola
Next Level
Panasonic
Philips
Proscan
RadioShack
RCA
Samsung
Sony
Star Choice
Tivo
Toshiba
Voom

00775
00247, 00566, 00639, 00749, 01142,
01377, 01442, 01609, 01749
00775, 01775
00775, 01775
00775, 01775
00775, 01775
00566
00869
00775, 01775
00775, 01775
00749, 01142, 01442, 01749
00869
00775, 01775
00749
00869
00869
00247
00749, 01142, 01442, 01749
00566
00869
00566
01377, 01442, 01609
00639
00869
01142, 01442
00749, 01749
00869

SAT/PVR Combination
Bell ExpressVu

00639, 01142, 01377, 01442
00775
00775
00775
00775
01142, 01442
00869
01142, 01442
01442
00639
00869
01142, 01442

00775

Akai
Dynex
Electrograph
Emerson
ESA
Funai
Gateway
GFM
Hisense
Hitachi
Insignia

JVC
LG
Magnavox
Marantz
Maxent
Memorex
Mitsubishi
NEC
NetTV
Olevia
Panasonic
Petters
Philco
Philips
Pioneer
Polaroid
RCA
Sampo
Samsung
Sansui
Sanyo
Sharp
Sony
SVA
Sylvania
Syntax
Toshiba

www.insigniaproducts.com

10812, 11675
11780, 12049, 12184
11755
11394, 11864, 11963
10812, 11963
11963
11755
11963
11660
11643
11204, 11423, 11517, 11564, 11660,
11780, 11892, 11963, 12002, 12049,
12417
11601
11423, 12358
11454, 11963
11454
11755
11892
11250
11797
11755
11610
11457, 11480
11523
11394, 11963
11454, 11744
11457
11523, 12002
11781, 12002, 12187, 12247, 12434
11755
10812
11892
11142
10818
10810
11963
11394, 11864, 11963
11610
11524, 12006

NS-AV511_11-0201_MAN_.book Page 28 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Television
Viewsonic
Vizio
Westinghouse
Zenith

DVD
10857, 11627, 11755
11758
10889, 11712
11423

Sony
Sylvania
Symphonic
Technics
Toshiba
Urban Concepts
Xbox
Yamaha
Zenith

VCR
DirecTV
Humax
Philips
Tivo

20739
20739
20739
20739

30864, 31033, 31633, 33004
33002
33002
30490
30503, 32277
30503
30522
30490, 30539, 30817, 33011
30503, 33003

DVD High Definition (Blu-Ray)
PVR
DirecTV
Humax
Philips
Tivo

20739
20739
20739
20739

DVD
Accurian
California Audio Labs
Denon
Disney
Emerson
Funai
GE
GFM
Go Video
GoldStar
Grundig
Hitachi
Insignia
Integra
JVC
Kenwood
LG
Magnavox
Marantz
Microsoft
NAD
Onkyo
Panasonic
Philco
Philips
Pioneer
Polk Audio
Presidian
Proscan
RCA
Samsung
Sharp

33002
30490
30490, 31634, 33010
33002
33002
33002
30522
33002
33003
33003
30539
30573
32095, 33002, 33014, 33025
31634, 32900
32365
30490
33003
30503, 30539, 33002
30539, 33013
30522
33003
30503, 32900, 32910
30490, 30503, 33005
33002
30503, 30539, 32056, 33002, 33007,
33016
30631, 33000, 33017
30539
33002
30522
30522
30490, 30573, 33001, 32329, 32489,
32556
33002

Denon
Insignia
Integra
JVC
LG
Magnavox
Marantz
NAD
Olevia
Onkyo
Oppo
Panasonic
Philips
Pioneer
Samsung
Sharp
Sony
Sylvania
Viore
Vizio
Yamaha

33010
33002, 33014, 33025
32900
32365
33003
33002
33013, 33015
33024
33012
32900, 32910
33021
33005
33007, 33016
33000, 33017
33001
33009
33004, 33026, 33008
33002
33022
33023
33011

DVD-R
Accurian
Funai
Go Video
LG
Magnavox
Panasonic
Pioneer
RCA
Samsung
Sharp
Sony
Sylvania
Toshiba
Zenith

33002
33002
33003
33003
33002
30490
30631
30522
30490
33002
31033
33002
32277
33003

TV/DVD Combination
Akai

www.insigniaproducts.com

11675

NS-AV511_11-0201_MAN_.book Page 29 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

TV/DVD Combination
Dynex
Emerson
ESA
Funai
GFM
Insignia
LG
Magnavox
Polaroid
RCA
Sharp
Sylvania
Toshiba

12049, 12184
11394, 11864, 11963, 33002
11963
11963
11963
11963, 12002, 12049, 12417
11423
11963
11523, 12002
12002, 12187
10818
11394, 11864, 11963, 33002
11524, 12006

Maintaining
To clean this receiver, wipe with a soft, dry cloth. If
the surfaces are extremely dirty, use a soft cloth
dipped in a soap and water solution or a weak
detergent solution.
• Never use alcohol, paint thinner, or benzine to
clean this receiver.
• Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.

Troubleshooting
If a problem occurs, run through the following table
before contacting Insignia.
If the problem persists, attempt to solve it by
switching the receiver off and on again. If this fails
to resolve the problem, contact Insignia. Under no
circumstances should you attempt to repair the
receiver yourself as this could void the warranty.
To reset the receiver to its factory defaults, turn it on
and, while holding down VCR/DVR, press ON/
STANDBY. Clear appears on the display and the
receiver enters Standby mode.
On the receiver

Note that resetting the receiver will delete your radio presets and custom settings.

To reset the remote control to its factory defaults,
while holding down RECEIVER, press and hold
down AUDIO until the Remote indicator lights
(about three seconds). Within 30 seconds, press
RECEIVER again.
Remote indicator
Remote
indicator

RECEIVER button
RECEIVER

HOME
button
HOME

Notes
•

•
•

www.insigniaproducts.com

The receiver contains a microcomputer for
signal processing and control functions. In rare
situations, severe interference, noise from an
external source, or static electricity may cause it
to lockup. If this happens, unplug the power
cord from the wall outlet, wait at least five
seconds, and then plug it back in again.
Insignia is not responsible for damages (such as
CD rental fees) due to unsuccessful recordings
caused by the unit’s malfunction.
Before disconnecting the power cord from the
wall outlet, set the receiver to Standby.

NS-AV511_11-0201_MAN_.book Page 30 Wednesday, April 13, 2011 9:31 AM

Insignia NS-AV511 Surround Sound Receiver

Insignia Ns Av511 Users Manual AV511_11 0201_MAN_ENG_V1

7cc9de8f-2712-4702-9.. 7cc9de8f-2712-4702-9d4c-6304fef23dcb

NS-AV511 to the manual 7cc9de8f-2712-4702-9d4c-6304fef23dcb

Navigation menu

Versions of this User Manual:

Views

Navigation