Insignia Ns Dv720Pbl2 Users Manual

NS-DV720PBL2 to the manual cfe8b930-d822-4a55-97e9-e5b1c2e58251

2015-01-24

: Insignia Insignia-Ns-Dv720Pbl2-Users-Manual-318457 insignia-ns-dv720pbl2-users-manual-318457 insignia pdf

Open the PDF directly: View PDF PDF.
Page Count: 28

720p HD Digital Camcorder
NS-DV720PBL2
User Guide
ii www.insigniaproducts.com
Contents
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
LCD recording mode icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
LCD playback mode icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting up your camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Charging the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Inserting or removing an SD/SDHC memory card . . . . . . . . . . . . . . . . . 6
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Turning your camcorder on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Turning on your camcorder for the first time . . . . . . . . . . . . . . . . . . . . . . 7
Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Recording a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Viewing movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Deleting movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Taking a close-up picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Viewing pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Deleting pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using camcorder features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adjusting camcorder settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning Simple Mode off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning operation sounds on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the video format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning stabilization on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning motion detection on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the scene mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the color balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Imprinting the date and time on pictures . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Erasing an SD/SDHC memory card or the internal memory . . . . . . . 15
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning help text on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting the TV format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Selecting the file format for movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
iii
Contents
www.insigniaproducts.com
Resetting to factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Viewing movies and pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting to an HDMI enabled TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting to a TV using the supplied A/V cable . . . . . . . . . . . . . . . . . 18
Viewing movies and pictures on a computer . . . . . . . . . . . . . . . . . . . . 19
Installing software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transferring movies or pictures to a computer . . . . . . . . . . . . . . . . . . . 19
Burning a movie to a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications and default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
iv
Contents
www.insigniaproducts.com
1
www.insigniaproducts.com
720p HD Digital Camcorder
Important safety
instructions
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use your camcorder near water.
6Clean only with a dry cloth.
7Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8Do not leave your camcorder near any heat
sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that
produce heat.
9Protect the power cord from being walked on or
pinched particularly at plugs and the point
where they exit from your camcorder.
10 Only use attachments/accessories specified by
the manufacturer.
11 Unplug your camcorder during lightning storms
or when unused for long periods of time.
12 Refer all servicing to qualified service personnel.
Servicing is required when your camcorder has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into your
camcorder, your camcorder has been exposed
to rain or moisture, does not operate normally,
or has been dropped.
13 To reduce the risk of fire or electric shock, do not
expose your camcorder to rain, moisture,
dripping, or splashing, and no objects filled with
liquids, such as vases, shall be placed on it.
14 Batteries should not be exposed to excessive
heat such as direct sunlight, fire, or the like.
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-DV720PBL2 is designed
for reliable and trouble-free performance.
Features
• Five megapixel sensor that can record movies in
720p high definition
• 4x digital zoom gives you increased control over
the movies and pictures you take
• Internal memory lets you take pictures and
movies without a memory card (approximately
90 MB of the internal memory is available for
video and still image capture)
• Memory card slot lets you use an SD memory card
(up to 4 GB) or SDHC memory card (up to 32 GB)
to increase storage capacity
• Captures still images at 5 megapixel resolution
• LCD monitor to help you easily compose and view
images
• HDMI ouput so you can easily play back movies
and view pictures on an HDMI-enabled TV (HDMI
cable not included)
• Automatic or manual color balance adjustment
• Image stabilization for recording reduces blurry
movies from shaky hands or low-light conditions
• Simplified menu and user interface makes using
your camcorder easy
Package contents
• NS-DV720PBL2 720p HD digital camcorder
•USB cable
•A/V cable
• AC adapter/charger
• Lithium-ion rechargeable battery
• Quick Start Guide
• CD (software and User Guide)
• Wrist strap
•Carrying pouch
System requirements
• Microsoft® Windows® XP, Windows Vista®,
Windows 7 or Mac OS 10.x or higher
• Intel® Pentium®4 2.4GHz or higher processor
• 512 MB of RAM (memory)
• CD drive (DVD drive is required if you want to
burn movies to DVD using the included ArcSoft
MediaImpression software)
• 700 MB free hard drive space
• Available USB 2.0 port
• 16-bit color display
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
2
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Front Back
#Item Description
Lens Focuses the image when taking pictures or movies.
LCD panel
Lets you view pictures and movies while you are
capturing them. Lets you view stored pictures and
movies. Displays camcorder status information.
LED light Turns on when you press on the five-way button.
(power button) Press down for one second to turn your camcorder on
or off.
12
34
1
2
3
4
#Item Description
(playback) LED
indicator
Lights green when your camcorder is in playback
mode.
(camera) button Press to take a picture.
(record/power)
LED indicator
Lights blue when your camcorder is in record mode.
Flashes blue when the battery is recharging.
T/W (Tele/Wide) button
In record mode
Press T to zoom in. Press W to zoom out.
In playback mode
In movie playback mode, press T to increase the
volume or press W to decrease the volume. In picture
playback mode, press T to zoom in or press W to zoom
out.
(movie) button
In record mode
Press to start recording a movie. Press again to stop
recording.
In playback mode
Press to start and pause movie playback.
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
3
720p HD Digital Camcorder
www.insigniaproducts.com
Right
Five-way button
In record mode
Press to turn the light on and off. One press turns
on the digital light, two presses tuns on the LED light,
and three presses turns off the light. Note: The digital
light function increases the sensitivity of the
camcorder's imaging sensor, which increases the grain
of the image. The LED light is the light on the front of
the camcorder. It is excellent for dark environments
and has a range of 2 to 4 feet (0.6 to 1.2 meters).
Press to turn the self-timer on or off. The self-timer
is only available in camera mode.
In playback mode
Press to go to the next movie or picture. Press and
hold to fast-forward during movie playback.
Press to go to the previous movie or picture. Press
and hold to fast-reverse during movie playback.
Press to turn the indicators on the LCD display on
or off during picture playback or in movie playback
when a movie is paused. When a movie is playing,
press to increase the volume.
Press to delete the current movie or picture. A
movie must be stopped (not paused) in order to delete
it. If you press this button while a movie is playing or is
paused, the playback volume is decreased.
SET In picture playback mode, press to start a
slideshow. In picture magnification mode, press to
resume normal playback.
In menu mode
Press to adjust a setting.
Press to adjust a setting.
Press to move up in the list of options.
Press to move down in a list of options.
SET Press to open the record menu and to confirm
changes to menu settings.
(exit) button
In record or playback mode
Press to switch between record and playback mode.
After you stop recording, press to quickly review the
movie you recorded.
In menu mode
Press to go to the previous page.
TV out port Connect a non-high-definition TV to this port using
the supplied A/V cable.
HDMI out port Connect an HDMI-enabled TV to this port.
Mini USB port
Connect a computer to this port using the supplied
USB cable.
Connect the supplied AC adapter/charger to this port
to charge the battery.
Strap hook Attach the carrying strap to this hook.
#Item Description
6
7
8
9
10
11
#Item Description
Macro switch
Slide to switch between Macro mode and
Normal mode.
Switch to Macro mode to take close-up pictures of
objects between 6 in. ~ 10 in. (15 cm ~ 25 cm) away.
When your camcorder is in Macro mode, appears
on the LCD.
Battery cover Slide off to install the battery. For more information,
see “Installing the battery” on page 6.
2
1
1
2
4
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Left
Bottom
LCD recording mode icons
#Item Description
Speaker In playback mode, plays the audio recorded with
movies.
Microphone In record mode, records sound.
#Item Description
SD card slot Insert an SD/SDHC memory card (not included) into
this slot to increase the storage capacity.
Tripod socket Screw a tripod (not included) to this socket to increase
stability and help avoid blurry pictures or movies.
1
2
1
2
12
1
2
#Item
Picture resolution
2592 x 1944 (5 megapixels)
71
If a memory card is inserted, indicates the number of
pictures that can be taken at the current resolution
with the card’s unused memory.
If no memory card is inserted, indicates the number of
pictures that can be taken at the current resolution
with your camcorder’s unused internal memory.
Motion Detection (Simple Mode off)
Self-timer
Scene (Simple Mode off)
Backlight
Night
Face
Macro
Digital light
LED light
Movie resolution (Simple Mode on)
HD
SD
Movie resolution (Simple Mode off)
HD 720p
SD wide
SD standard
QVGA
00:06:10 Movie recording time remaining at the current
resolution
Stabilization
1
2
3
4
5
6
7
9
8
10
11
12
13
14
1
2
3
4
5
6
7
8
9
10
5
720p HD Digital Camcorder
www.insigniaproducts.com
LCD playback mode icons
Zoom meter:
4x digital zoom
2009/05/19
1 : 00 PM Date and time
Battery power full
Battery power medium
Battery power low
Battery power depleted
Color balance (Simple Mode off)
AUTO Auto
Daylight
Fluorescent
Tungsten
#Item
00:06:10 Movie playback time counter
0005/0005 Current number/total number of movies or pictures
Volume
#Item
11
12
13
14
1
2
3
4
5
1
2
3
Movie resolution (Simple Mode on)
HD
SD
Movie resolution (Simple Mode off)
HD 720p
SD wide
SD standard
QVGA
Indicates your camcorder is in movie playback mode.
The icon on the right toggles between and each
time you press .
#Item Description
Indicates your camcorder is in photo playback mode
0005/0005 Current number/total number of pictures
Magnification area
2009/05/19
1 : 00 PM Date and time stamp
#Item
4
5
12
3
4
1:00 PM
1:00 PM
1:00 PM
1:00 PM
1
2
3
4
6
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Setting up your camcorder
Installing the battery
Before using your camcorder, you need to install
the battery.
To install the battery:
1Slide the battery cover off your camcorder.
2Insert the battery. Make sure that the + and –
symbols on the battery line up with the + and –
symbols on your camcorder.
3Replace the battery cover. Make sure that it is
firmly in place.
Charging the battery
While the battery is charging, the record/power
light blinks. When charging is complete, the
record/power light is solid.
To charge the battery:
1Make sure that your camcorder is turned off.
2Connect the AC charger to your camcorder’s
mini USB port and to a power outlet.
Or,
Connect the USB cable to the mini USB port on
your camcorder and to a USB port on a
computer.
Inserting or removing an SD/SDHC memory
card
To insert or remove an SD/SDHC memory card:
1Insert the card into the memory card slot with
the arrow on the card pointing toward the slot
and the label facing up.
2To remove the card, press in on the card to
release it. When the card pops out slightly, pull it
out of the slot.
Protecting data on an SD/SDHC memory card
You can protect an SD/SDHC memory card to
prevent the recording or deletion of pictures or
movies.
To protect an SD/SDHC memory card:
• Slide the protection tab into the protected
position.
Caution
You must use the supplied AC adapter or USB cable
to power your camcorder or charge the battery.
You can use your camcorder while the AC adapter is
connected, but the battery will not charge if your
camcorder is in use.
Notes
• We recommend using a memory card with a
capacity of 1 GB or higher.
• When a memory card is inserted, movies and
pictures are automatically saved to the card
rather than to the internal memory.
Unprotected Protected
7
720p HD Digital Camcorder
www.insigniaproducts.com
Getting started
Turning your camcorder on or off
To turn your camcorder on or off:
1Press down and hold (power) for one second.
Or
Open the LCD panel 90°.
2Rotate the LCD panel 90° counter-clockwise so
you can view pictures and movies.
3To turn off your camcorder, press down and hold
(power) for one second.
Or
Return the LCD to its original (closed) position.
Turning on your camcorder for the first time
When you turn on your camcorder for the first time,
you need to choose a menu language and set the
date and time.
To choose a menu language and set the date and
time:
1Turn on your camcorder. The language screen
opens.
2Press or to select a language, then press
SET. The Set Date/Time screen opens.
3Press or to set the year, then press to
move to the month field.
4Repeat Step 3 to enter the day, hour, and
minute, and to select AM or PM.
5When you are finished, press SET.
Note
If you reset your camcorder to the default settings,
you will have to select the menu language and set
the date and time again.
8
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Initial settings
When you turn on your camcorder for the first time,
your camcorder will be in Simple Mode. Simple
Mode hides advanced settings and makes your
camcorder easier to operate.
Your camcorder's default settings are:
•Video Format: HD (1280 x 720p, 30 fps). This is
the highest quality video resolution that your
camcorder offers. You can switch it to SD (640 x
480p, 30 fps) mode. SD mode is preferable when
the movies you capture will only be watched on a
standard definition TV. SD mode also uses less
memory than HD mode.
•Stabilization: Off. Image stabilization is ideal for
reducing blurred images that may be caused by
shaky hands or low-light conditions. Turn off
Stabilization when using a tripod.
•Sounds: On. When sounds are turned on, an alert
is heard when key functions are accessed.
Additional settings become available when Simple
Mode is turned off. To turn off Simple Mode, see
“Turning Simple Mode off” on page 11.
•Simple Mode: On. Turn off Simple Mode to access
advanced settings.
Default advanced settings:
•Motion Detection: Off.
•Scene Mode: Auto.
•Color Balance: Auto.
•Time Stamp: Off.
•Help Text: On.
•TV Format: NTSC.
•File Format: AVI.
A brief description of what the advanced settings
do is provided by the viewing help text at the
bottom of the screen. To view the help text,
highlight any menu option.
Recording a movie
To record a movie:
1Turn on your camcorder.
2Aim the lens, then press to start recording.
Press again to stop recording.
3Press immediately after recording to view the
recording.
Viewing movies
To view movies:
1Press to switch to playback mode. The
playback mode main menu opens.
2Press or to highlight MOVIE, then press SET
to go to movie playback mode.
3Press or to highlight the movie you want to
view, then press SET.
4Press to play the movie.
5While the movie is playing, you can press:
• or to fast-rewind or fast-forward the
movie. Press the button again to resume
normal playback.
• Press T or to increase or press W or to
decrease the volume.
6Press again to pause playback.
Deleting movies
To delete movies:
1Press to switch to playback mode. The
playback mode main menu opens.
2Press or to highlight MOVIE, then press SET
to go to movie playback mode. The first frame of
the last movie recorded is displayed.
3Press or to highlight the movie you want to
delete.
IMPORTANT
Your camcorder ships with the default file format set
to AVI. AVI is ideal for users of Windows® XP,
Windows Vista®, or Windows® 7 computers. You can
view and edit AVI files with the included ArcSoft
MediaImpression software.
If you are a Mac™ user, you should change the default
file format to MOV. MOV files may be easily viewed
and edited on Mac computers using QuickTime™ or
iMovie™ (not included).
The file format cannot be changed after a recording
is created. You should select the file format before
you start recording.
Note
When no buttons are pressed for three seconds
during playback, the playback function icons in the
upper right of the LCD disappear automatically.
9
720p HD Digital Camcorder
www.insigniaproducts.com
4Press to highlight Delete. A message appears
asking you to confirm the deletion.
5Press or to highlight Yes, then press SET to
delete the movie.
Or,
Press or to highlight No, then press SET to
cancel the deletion. (You can also press to
cancel the deletion and close the menu.)
Taking a picture
To take a picture:
1Turn on your camcorder.
2Aim the lens, then press .
3Press to view the picture. Press two more
times to go back to record mode.
Taking a close-up picture
Switch to Macro mode to take close-up pictures of
objects between 6 in. ~ 10 in. (15 cm ~ 25 cm) away.
To take a close-up picture:
1Turn on your camcorder.
2Slide the Macro switch to the macro position.
appears on the LCD.
3Aim the lens, then press .
4Press to view the picture. Press two more
times to go back to record mode.
Viewing pictures
You can view pictures stored on your camcorder or
memory card. If a memory card is inserted, you can
only view pictures stored on the memory card.
To view pic tures:
1Press to switch to playback mode. The
playback mode main menu opens.
2Press or to highlight PICTURE, then press
SET to go to picture playback mode. The most
recent photo captured is displayed.
3While viewing pictures, you can press:
• or to go to the previous or next picture.
•T to magnify the picture. To move around in a
magnified picture, press or . Press
SET to resume normal viewing
•SET to start a slideshow. Press this button
again to pause the slideshow.
Notes
• If a memory card is inserted, you can delete only
movies stored on the card.
• Movies stored on a write-protected memory
card cannot be deleted.
Note
If the selected Video Format is a wide format (HD,
HD 720p, or SD Wide), the image displayed on your
camcorder in record mode will have black bars.
However, pictures will always be captured in 4:3
(full frame) format.
Note
Make sure that you return the Macro switch to the
normal position when you are not taking close-up
pictures.
10
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Deleting pictures
To delete pictures:
1Press to switch to playback mode. The
playback mode main menu opens.
2Press or to highlight PICTURE, then press
SET to go to picture playback mode. The most
recent photo captured is displayed.
3Press or to select the picture you want to
delete.
4Press to highlight Delete. A message appears
asking to confirm the deletion.
5Press or to highlight Yes, then press SET to
delete the picture.
Or,
Press or to highlight No, then press SET to
cancel the deletion. (You can also press to
cancel the deletion and close the menu.)
Using camcorder features
Using the light
Your camcorder has a built-in light to provide
lighting in low-light environments.
To use the light:
1Press on the five-way switch. The light turns
on and (digital light) appears on the LCD.
Digital light extends the dynamic range for
backlight and provides high contrast so objects
will be brighter and clearer.
2Press again. The light changes to normal light
and appears on the LCD and indicates that
the LED light is turned on. The LED light
provides additional lighting in low-light
environments and has a range of 2 to 4 feet
(0.6 to 1.2 meters).
3Aim the lens, then press to start recording.
Press again to stop recording.
4Press again to turn off the light.
Using the self-timer
When you turn on the self-timer, your camcorder
waits 10 seconds before taking a picture.
To use the self-timer:
1Aim the lens, then press . appears on the
LCD.
2Press . The LED light on the front of your
camcorder blinks until the shutter operates
(about 10 seconds after you press . The
speed of the blinking increases just before the
picture is taken.
Notes
• If a memory card is inserted, you can delete only
pictures stored on the card.
• Pictures stored on a write-protected memory
card cannot be deleted.
Notes
Using the digital light will increase the grain of your
movie. This slight reduction in image quality is
normal.
Note
The LED light is automatically disabled when battery
power is low.
11
720p HD Digital Camcorder
www.insigniaproducts.com
Using zoom
Zoom magnifies images when recording movies or
taking pictures.
To use zoom:
1Press T on the Tele/Wide button to zoom in. The
maximum digital zoom is 4x.
2Press W on the Tele/Wide button to zoom out.
Adjusting camcorder
settings
Turning Simple Mode off
Your camcorder comes from the factory in Simple
Mode. Simple Mode hides advaced user settings
and makes your camcorder easier to use right out of
the box. Turning off Simple Mode lets you access
advaced settings, such as video format options,
motion detection, scene condition, and color
balance.
To turn off Simple Mode:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The Simple menu opens.
3Press or to highlight the (settings) tab.
The Settings menu opens.
4Press or to highlight Simple Mode, then
press SET or . The Simple Mode screen opens.
5Press or to highlight Off, then press SET.
To turn on Simple Mode, select On.
6Press to close the menu.
Turning operation sounds on or off
By default, your camcorder makes sounds when
you access key functions. You can turn the sounds
off.
To turn operation sounds on or off:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Press or to highlight the (settings) tab.
4Press or to highlight Sounds, then press
SET or . The Sounds screen opens.
5Press or to highlight On or Off, then press
SET.
6Press to close the menu.
12
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Setting the video format
To set the video format:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The Menu opens.
3Press or to highlight the (movie) tab,
then press to highlight Video Format.
4Press SET or . The Video Format screen opens.
Simple Mode Off
5Press or to highlight a resolution, then
press SET. You can select:
•SD—(Simple Mode only) SD mode resolution
is 640 x 480p, 30 fps, 4:3 format. SD resolution
requires less memory than HD resolution and
is a good choice if you will only be watching
your videos on an SD, 4:3 television. Note: SD
mode is called SD Std. when Simple Mode is
off.
•HD—(Simple Mode only) HD mode resolution
is 1280 x 720p, 30 FPS, 16:9 format. This mode
requires the most memory, but also produces
the highest quality video images your
camcorder can offer. This resolution is ideal if
you will be watching your movies on an HDTV.
Note: HD mode is called HD 720p when
Simple Mode is off.
•HD 720p—(Only accessible when Simple
Mode is off) HD 720p mode resolution is
1280 x 720p, 30 fps, 16:9 format. This mode
requires the most memory, but also produces
the highest quality video images your
camcorder can offer. This resolution is ideal if
you will be watching your movies on an HDTV.
Note: HD 720p mode is called HD when
Simple Mode is on.
•SD Wide—(Only accessible when Simple
Mode is off) SD Wide capture resolution is
848 x 480, 60 fps, 16:9 format. This mode is
ideal if you want wide-format video, but want
to use less memory space than would be used
in the camcorder's HD (720p) mode. The
higher frame rate offered by SD Wide mode is
also excellent for filming action movies, such
as sporting events. SD Wide movies will be
upconverted to 720p if played back when your
camcorder is connected to a TV using an HDMI
cable (not included).
•SD Std.—(Only accessible when Simple Mode
is off) SD Std. mode resolution is 640 x 480p,
4:3 format. SD Standard resolution requires
less memory than HD resolution and is a good
choice if you will only be watching your videos
on an SD, 4:3 television. Note: SD Std. mode is
called SD when Simple Mode is on.
•QVGA—(Only accessible when Simple Mode
is off) The resolution is 320 x 240, 30 fps,
4:3 format. This mode is ideal you want to
e-mail your videos or upload them to a video
sharing service such as YouTube™. This mode
requires the least amount of memory, but also
produces the lowest quality videos.
6Press to close the menu.
Turning stabilization on or off
The Stabilization feature increases stability and
helps avoid blurry movies in low-light conditions or
when your hands are not steady.
To turn stabilization on or off:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The Menu opens.
3Press or to highlight the (movie) tab,
press to highlight Stabilization, then press
SET or . The Stabilization screen opens.
4Press or to highlight On or Off, then press
SET.
5Press to close the menu.
Turning motion detection on or off
Your camcorder has a motion detection feature. If
this feature is turned on, your camcorder starts
recording when it detects movement. Press to
stop recording.
To turn motion detection on or off:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
Note
The Stabilization feature is only supported in SD
(Simple Mode), SD Std. (Simple Mode off), or QVCA
(Simple Mode off) resolution modes or for still
images.
The Stabilization feature should be turned off if you
are using a tripod.
13
720p HD Digital Camcorder
www.insigniaproducts.com
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (movie) tab,
press to highlight Motion Detection, then
press SET or . The Motion Detection screen
opens.
5Press or to highlight On or Off, then press
SET.
6Press to close the menu.
Selecting the scene mode
Your camcorder has four scene modes to help
optimize your movies and pictures.
To select the scene mode:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (effect) tab,
press to highlight Scene, then press SET or
. The Scene screen opens.
5Press or to highlight a scene mode, then
press SET. You can select:
•Auto—Select this option when there are no
special lighting conditions. Your camcorder
will automatically choose the best settings for
your subject.
•Backlight—Select this option when there is
bright light behind the subject.
•Night—Select this option for night scenes or
low-light conditions.
•Face—Select this option to make skin tones
more natural.
6Press to close the menu.
Adjusting the color balance
Your camcorder automatically adjusts the color
balance for most conditions. However, you can
manually select the color balance for special
conditions.
To adjust the color balance:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (effect) tab,
press to highlight Color Balance, then press
SET or . The Color Balance screen opens.
5Press or to highlight a color balance
mode, then press SET. You can select:
•Auto—Select this option to let your
camcorder automatically adjust the white
balance.
•Daylight—Select this option when recording
movies or taking pictures outdoors.
•Fluorescent—Select this option when the
light source is fluorescent.
•Tungsten—Select this option when the light
source is tungsten.
6Press to close the menu.
Note
If you are recording a movie with Motion Detection
turned on and you stop recording, Motion Detection
is automatically turned off. To turn it back on again,
repeat these steps.
Note
To avoid blurry pictures when Night mode is
selected, place the camcorder on a flat, steady
surface, or use a tripod.
14
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Imprinting the date and time on pictures
You can imprint the date or the date and time on
pictures.
To imprint the date and time on pictures:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (settings) tab.
The Settings menu opens.
5Press to highlight Time Stamp, then press
SET or . The Time Stamp screen opens.
6Press or to highlight an option, then press
SET. You can select:
•Date & Time—Imprints the date and time on
pictures.
•Date—Imprints the date on pictures.
•Off—Turns the time stamp feature off.
7Press to close the menu.
Setting the date and time
To set the date and time:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (settings) tab.
The Settings menu opens.
5Press to highlight Set Time/Date, then press
SET or . The Set Time/Date screen opens.
6Press or to move between the fields, then
press or to change the values in the fields.
The formats are YEAR/MONTH/DAY and
HOUR:MINUTES.
7Press SET to save your settings, then press to
close the menu.
Note
Date and time cannot be imprinted on movies.
Note
Once the date or date and time are imprinted on a
picture, they cannot be removed.
15
720p HD Digital Camcorder
www.insigniaproducts.com
Erasing an SD/SDHC memory card or the
internal memory
If the files on an SD/SDHC memory card do not
display smoothly and the LCD displays the “!”
symbol, the card is formatted for low speed or has
the wrong type of content on it. To correct this
problem, format the card in your camcorder instead
of in a computer.
To erase an SD/SDHC memory card or the
internal memory:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Press or to highlight the (settings) tab.
No card inserted
Card inserted
4Press or to highlight Erase Card (if a card
is inserted) or Erase Memory (if a card is not
inserted), then press SET or . The Erase Card
screen opens.
Erase Card
Erase Memory
5Press or to select Ye s or No, then press
SET to confirm or press to close the menu
without formatting.
Selecting the menu language
To select the menu language:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
Caution
When you use the Erase feature, all files stored on the
card or in internal memory are deleted. Make sure
that you backup any files you want to save to a
computer before you use the Erase feature.
Note
If an SD/SDHC memory card is inserted in your
camcorder, the Erase feature erases and formats the
card.
If no SD/SDHC memory card is inserted, the Erase
feature erases the internal memory.
16
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
4Press or to highlight the (settings) tab.
The Settings menu opens.
5Press to highlight Language, then press SET
or . The Language screen opens.
6Press or to highlight a language, then
press SET.
7Press to close the menu.
Turning help text on or off
Your camcorder can display scrolling help text to
make using your camcorder easier.
To turn help text on or off:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (settings) tab.
The Settings menu opens.
5Press to highlight Help Text, then press SET
or . The Help Text screen opens.
6Press or to highlight On or Off, then press
SET.
7Press to close the menu.
Selecting the TV format
If you connect your camcorder to a TV, you need to
make sure that your camcorder is set to the correct
TV standard. The wrong TV standard may cause
images to flicker.
The NTSC standard is used in the USA, Canada,
Mexico, Japan, South Korea, and Taiwan.
The PAL standard is used in the UK, Europe, China,
Australia, Singapore, and Hong Kong.
To select the TV format:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (settings) tab.
The Settings menu opens.
17
720p HD Digital Camcorder
www.insigniaproducts.com
5Press to highlight TV Format, then press SET
or . The TV Format screen opens.
6Press or to highlight NTSC or PAL, then
press SET.
7Press to close the menu.
Selecting the file format for movies
To select the file format for movies:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Make sure that Simple Mode is off. See “Turning
Simple Mode off” on page 11.
4Press or to highlight the (settings) tab.
The Settings menu opens.
5Press to highlight File Format, then press
SET or . The File Format screen opens.
6Press or to highlight a file format then press
SET. You can select:
•AVI—Select this format if you are using a
Windows-based computer and/or intend to
use the included ArcSoft MediaImpression
software to view and edit movies.
•MOV—Select this format if you are using
QuickTime (not included) to view movies. This
setting is ideal for users of Mac computers.
Note: Movies cannot be edited in ArcSoft
MediaImpression if this format is selected.
7Press to close the menu.
Note
The file format cannot be changed after a recording
is created. You should select the file format before
you start recording.
18
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Resetting to factory defaults
To reset your camcorder to its original factory
default settings:
1Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2Press SET. The menu opens.
3Press or to highlight the (settings) tab.
4Press or to highlight Factory Reset, then
press SET or . The Factory Reset screen opens.
5Press or to select Ye s or No, then press
SET to confirm or press to close the menu
without resetting.
Viewing movies and
pictures on a TV
After you connect the TV, follow the instructions in
“Viewing movies” on page 8 or “Viewing pictures”
on page 9 to view movies or pictures.
Connecting to an HDMI enabled TV
To connect an HDMI enabled TV:
1Connect a mini HDMI to HDMI cable (not
included) to the HDMI port on your camcorder
and to an HDMI IN port on the TV.
2Set the video input source of the TV to HDMI.
Connecting to a TV using the supplied A/V
cable
To connect to a TV using the supplied A/V cable:
1Connect the A/V cable (included) to the TV port
on your camcorder and to the
VIDEO IN (yellow) and LAUDIOIN(white) ports
on the TV.
Note
If you reset your camcorder to the default settings,
you will have to select the menu language and set
the date and time again. For more information, see
“Turning on your camcorder for the first time” on
page 7.
Note
• Resetting your camcorder to the factory
defaults does not delete movies and pictures
store on internal memory.
Note
When your camcorder is connected to a TV:
• The LCD does not display.
• You cannot record movies or take pictures if
using your camcorder’s HDMI connection.
AV mode
(16:9)
AV mode
19
720p HD Digital Camcorder
www.insigniaproducts.com
2Set the TV's video input to the correct source.
This may be called "AV,” "Composite,” or
something else.
Viewing movies and
pictures on a computer
Installing software
Your camcorder comes with:
ArcSoft MediaImpression—A user-friendly program
that helps you manage your media, burn your
movies to DVDs, and upload your movies to
YouTube.
To install software:
1Insert the included CD into the CD or DVD drive
on your computer.
2Click Install MediaImpression, then follow the
on-screen instructions to complete the
installation.
Transferring movies or pictures to a computer
You can transfer movies or pictures to a computer
to e-mail to family and friends or post on a Web site.
To transfer movies or pictures to a computer:
1Connect the supplied mini USB cable to the mini
USB port on your camcorder and to a USB 2.0
port on the computer. The record/power LED
lights and starts blinking.
2 Windows® XP, Windows Vista® or Window 7:
Open My Computer or Windows Explorer. If a
card is inserted, two new drives will appear in
the drive list; otherwise, one new drive
(camcorder’s internal memory) will appear. The
internal memory drive will show up as DV. The
card drive will show up as whatever label the
card shipped with or that you selected if you
formatted the card in your computer. If you
erased the card in the camcorder, the label will
be DV-SD Card.
Mac OS 10.x and higher:
Two new drive icons will appear on the desktop
or in the sidebar if a card is inserted. Otherwise,
one new drive icon appears. The internal
memory drive will show up as DV. The card drive
will show up as whatever label the card shipped
with or that you selected if you formatted the
card in your computer. If you erased the card in
the camcorder, the label will be DV-SD Card.
3Double-click the drive you want to view. Your
movie and photo fi les will be in the
\DCIM\100MEDIA folder.
You can view, copy, delete, and move any
movies or pictures you want using normal
procedures for your computer's operating
system.
You can use ArcSoft MediaImpression to edit
movies or pictures (Windows XP, Windows Vista,
or Windows 7). For more information, see
“Installing software” on page 19.
Burning a movie to a DVD
If your computer runs the Windows XP, Windows
Vista, or Windows 7 operating system, you can use
ArcSoft MediaImpression to burn a movie to DVD,
then play the movie using regular DVD player.
To burn a movie to a DVD:
1Install ArcSoft MediaImpression. For more
information, see “Installing software” on
page 19.
2Make sure that you have a blank, writeable DVD
in the computer’s DVD drive.
Note
When using the TV out jack on your camcorder, all
movies will be output in an interlaced format.
Note
The included software is compatible with Windows
XP, Windows Vista, and Windows 7 only.
Note
Detailed information for using a program can be
found in the program’s online help.
Note
ArcSoft MediaImpression must be installed to view
movies in .avi format on your Windows-based
computer. If you do not want to install ArcSoft
MediaImpression, but want to watch your .avi
formatted movies on your Windows-based computer,
alternative software is available at Web sites such as
http://ffdshow.info/.
Note
If you previously named your memory card
something else, such as “SD Card,” that name is
retained and will be displayed in My Computer
(Windows), on the desktop, or in the sidebar (Mac)
unless you erase the card using your camcorder. If
you erase the card using your camcorder, the card
will be labeled DV - SD Card. For more information,
see “Erasing an SD/SDHC memory card or the
internal memory” on page 15.
Note
Although you can save an edited movie to
camcorder’s memory card, we do not recommended
it. When you edit a movie, the changes you make
may make the movie unviewable on your camcorder.
To safeguard your edited movie, save it to your
computer.
20
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
3In Windows, click Start, All Programs, click
ArcSoft MediaImpression, then
clickMediaImpression. The Welcome to ArcSoft
MediaImpression screen opens.
4Click Make Movie. The Make Movie screen
opens.
5Under Folders (1), open the folder that contains
the movies you want to burn to DVD.
6In the preview area (2), select the file you want
to burn.
7In the Make Movie area, click the select
button (3).
8Click Burn to Disc (4). The Burn to Disc screen
opens.
9Click Start. Your movie is burned to the DVD.
Troubleshooting
Problem Solution
Image on the LCD is blurry Try switching between Macro and Normal mode.
Use Macro mode for objects between 6 in. ~ 10 in.
(15 cm ~ 25 cm) away.
Use Normal mode for objects over 5 ft. (150 cm)
away.
The LED light on the front of the
camcorder is not working
Battery power is low. Charge the battery.
You cannot turn on the LED light after you start
recording. Stop recording, turn on the light, then
start recording again.
The files on the memory card do
not display smoothly and the
LCD shows the “!” icon
The “!” means the SD card is low speed or the files
on the card are the wrong type. Use your
camcorder to format your card instead of a
computer. See “Erasing an SD/SDHC memory card
or the internal memory” on page 15.
Indoor pictures look blurry and
dark
Your camcorder extends the exposure time under
low-light or indoor conditions. Keep your
camcorder and photographed subject steady for
several seconds when taking pictures. The shutter
sounds when a picture has been taken.
21
720p HD Digital Camcorder
www.insigniaproducts.com
Specifications and default
settings
Specifications
Specifications are subject to change without notice.
Default settings
Note
The LCD screen is manufactured using extremely
high-precision technology so over 99.99% of the
pixels are operational for effective use. However,
some tiny black or bright dots (white, red, blue, or
green) may appear on the LCD screen. These dots are
a normal result of the manufacturing process, and do
not affect the recording.
Image sensor 5 megapixel CMOS sensor
Operation modes Video record
Picture record
Lens F2.5 (f=5.7mm)
Focus range Normal mode:
5 ft. (150 cm) ~ infinite (still image)
3.6 ft. (110cm) ~ infinite (720p video)
Macro Mode:
Center 8 in. (20cm)
Zoom 4× digital zoom
Shutter Electronic
LCD monitor 3"
Storage media Internal 128 MB memory (approximately 90 MB is
available for movie and picture capture)
SD/SDHC card support (up to 32GB)
Image resolution 2592 x 1944 (5 megapixels)
Video resolution HD(720p)/HD: 1280 x 720 (30 fps)
SD Wide: 848 x 480 (60 fps)
SD Standard/SD: 640 x 480 (30 fps)
QVGA: 320 x 240 (30 fps)
Color balance Auto/Manual (Daylight, Fluorescent, Tungsten)
Self-timer 10-second delay
Light LED lamp
File format Picture: JPG
Video: H.264 in AVI or MOV format
Image play Single image and slideshow
Computer interface mini USB 2.0 port
TV out NTSC/PAL selectable, mini HDMI, or AV out
Battery Lithium-ion rechargeable battery (NP-60)
Dimensions
H×W×D
4.29 × 3.15 × 1.1 inches
(10.9 × 8 × 2.8 cm)
Weight 6.24 oz (170 grams) without battery
Setting Default
Resolution HD 720p/HD for movies
2592 x 1944 (5 megapixels) for pictures
Stabilization Off
Motion Detection Off
Scene Auto
Color Balance Auto
Sound On
Time Stamp Off
Simple Mode On
Help Text On
TV Format NTSC
File Format AVI
Volume Level 12
Light Off
Self-timer Off
22
NS-DV720PBL2 720p HD Digital Camcorder
www.insigniaproducts.com
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
23
720p HD Digital Camcorder
www.insigniaproducts.com
One-year limited warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new product (“Product”), that the Product shall
be free of defects in the original manufacture of the material or
workmanship for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This Product must
be purchased from an authorized dealer of Insignia brand
products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify
Insignia during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. The purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a screen
30 inches or larger, call 1-888-BESTBUY. Call agents will diagnose
and correct the issue over the phone or will have an
Insignia-approved repair person dispatched to your home.
Should the Insignia-approved repair person not correct the issue
on the first call, an Insignia television (size and features to be
determined by Insignia) will be loaned to you until your TV is
repaired and returned, at no charge to you. This feature is only
available to Insignia television consumers residing in the United
States.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
•Installation
•Set up adjustments
•Cosmetic damage
• Damage due to acts of God, such as lightning strikes
•Accident
•Misuse
•Abuse
•Negligence
•Commercial use
• Modification of any part of the Product, including the
antenna
• Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has been
altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2010 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
TM
www.insigniaproducts.com (877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2010 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
10-0742

Navigation menu