Insinkerator Ss 1000 Users Manual How To Mount Food Disposer | Waste
SS-750 to the manual 36a0e9bf-31ea-43fd-84f1-722fc8546d33
2015-02-02
: Insinkerator Insinkerator-Ss-1000-Users-Manual-432060 insinkerator-ss-1000-users-manual-432060 insinkerator pdf
Open the PDF directly: View PDF 
.
Page Count: 4
Mounting Adaptor
Selection Guide
for Foodservice Food
Waste Disposers
T
h
e
m
o
s
t
t
r
u
s
t
e
d
n
a
m
e
i
n
f
o
o
d
w
a
s
t
e
m
a
n
a
g
e
m
e
n
t
.
FLANGE
SINK MOUNT
A
B
Waste King, ISE, Toledo, National 4½" 5-1/8" 11327A Discard previous adaptor parts.
FMC, Avant 4-5/8" 5-1/8" 11378 Re-use split ring.
FMC, Avant 5¼" 5-11/16" 11327C Discard previous adaptor parts.
Bus Boy 6" 6-7/8" 11327K Discard previous adaptor parts
(has 3-piece split ring).
ISE, Toledo 6" 7-3/16" 11327B Discard previous adaptor parts.
Standard ISE mounting 6-5/8" 7-1/8" 11599E Discard previous adaptor parts.
National, Hobart, Toledo 7" 7-3/8" 11327G Discard previous adaptor parts.
National mounting has ten
bolt circle on split ring.
Salvajor 7" 7¾" 11599A Discard previous adaptor parts
(split ring supplied).
ISE, Toledo 8" 9¼" 11327 Discard previous adaptor parts
(split ring supplied).
Normally Used By A B ISE Ring
Adaptor # Special Information
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
1
A
E
B
Waste King, Red Goat 4½" 6½" 5½" 6 11599 Discard previous
adaptor parts. Use
existing bolt holes.
American Delphi, Atomic 6" 7½" 6-7/8" 6 11378D Discard previous
adaptor parts. Use
existing bolt holes.
National, Hobart 7" 8½" 8-1/16" 10 11599B Discard previous
adaptor parts.
Hobart 9" 12-1/8" 11-1/8" 8 11327E Discard previous
adaptor parts. Use
existing bolt holes.
Normally Used By A E No. of
Bolt Holes
BSpecial
Information
ISE Ring
Adaptor#
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
E – Diameter (bolt hole circle)
2
A
B
BOLT
HOLES IN
UNATTACHED
RING
Waste King 6" 6½" 11327D Loose ring on sink not used with
this adaptor (O.D. of loose ring is
7½" with six bolts – 7" bolt hole
circle diameter).
Normally Used By A B Special Information
ISE Ring
Adaptor No.
A – Diameter (sink or bowl opening)
B – Diameter (outside flange)
3
A. Disconnect existing disposer from sink bowl or cone.
B. Find the diagram that matches your sink bowl or cone.
C. Measure the A and B dimensions (also C, D and E if indicated).
D. Match the manufacturer and dimensions to find the adaptor number to order.
Use This Chart to Select the Right InSinkErator Mounting Adaptor
LOOSE RING (RE-USE)
MEASURE
FROM ABOVE
(INSIDE BEND)
A
C
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Waste King, Bus Boy 5-7/8" 6-1/2" 11327H Re-use existing clamping ring. Request
#11307 clamping ring if existing
Waste King, Bus Boy 5-7/8" 6-7/8" 11327H clamping ring cannot be used.
Normally Used By AC Special Information
ISE Ring
Adaptor No.
4
MEASURE
FROM ABOVE
(INSIDE BEND)
E
A
C
Hobart 4½" 6-7/8" 5½" 6 11327H Discard previous
adaptor parts.
Normally Used By A E No. of
Bolt Holes
CSpecial
Information
ISE Ring
Adaptor#
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
E – Diameter (bolt hole circle)
5
A
C
SNAP-
RING
GROOVE
MEASURE
FROM ABOVE
(INSIDE BEND)
A – Diameter (sink or bowl opening)
C – Diameter (inside bend)
Hobart 5" 5-7/8" 11327J Discard previous adaptor parts (clamping
ring supplied).
G.E. 6" 6-3/8" 11378E Discard previous adaptor parts – has snap
ring groove on outside of sink throat.
Normally Used By AC Special Information
ISE Ring
Adaptor No.
6
A
NO FLANGE
MOUNT
D
A – Diameter (sink or bowl opening)
D – Diameter
Red Goat, Insinger 4½" 1-1/8" 11378C 4¾" rubber connection sleeve and
clamping bands. Support legs required.
Waste King 6" 1-1/8" 11378A 6¼" rubber connection sleeve and
clamping bands. Support legs required.
Red Goat, Insinger 7" 1-1/8" 11378B 7¼" rubber connection sleeve and
clamping bands. Support legs required.
Master 8" 1" 11599K 8¼" rubber connection sleeve and
clamping bands. Support legs required.
Normally Used By AD Special Information
ISE Ring
Adaptor No.
7
A
D
RAISED
BEAD
A – Diameter (sink or bowl opening)
D – Diameter
Normally Used By AD Special Information
ISE Ring
Adaptor No.
8
Salvajor 4-7/16" 1" 11599N Has raised bead on outside of sink throat.
Support legs required.
Salvajor 6-5/8" 1" 11599H
Meat Prep. Area
4700 21st Street
Racine, WI 53406
1-800-845-8345
www.insinkerator.com
InSinkErator. #1 Choice of Foodservice Operations
Every InSinkErator disposer reflects an uncompromising
commitment to quality as well as state-of-the-art engineering.
Unlike other manufacturers, we begin with the raw materials and
build virtually every component that goes into our disposers.
65/8"
65/8"
613/16"
47/8"7"
11/2"
33/8"
711/16"
17"
71/8"
233/4"
311/8"
13"
3"
83/4"
83/4"
65/8"
73/4"
23/4"
187/16"
2"
613/16"
7
3/8"
It’s all part of our demanding quality control programs that
cover not only the initial design, but every step in the
manufacturing process.
Up to 100 SS-75 SS-50 – – –
100-150 SS-100 SS-75 SS-50 SS-50 –
150-175 SS-125 SS-100 SS-75 SS-50 SS-150
175-200 SS-150 SS-150 SS-75 SS-75 SS-150
200-300 SS-200 SS-150 SS-75 SS-75 SS-300
300-750 SS-300 SS-150 SS-75 SS-75 SS-300
750-1500 SS-500 SS-300 SS-150 SS-150 SS-500
1500-2500 (2) SS-500 SS-300 SS-150 SS-150 SS-500
Persons per Meal
Whether you serve 25 or 2500 people, there’s an InSinkErator disposer that’s right for you.
Soiled Dish Table Vegetable Prep.
Area Salad Prep. Area Pot Sink
Recommended Sizing Chart*
* The models listed are the minimum size InSinkErator disposer to be used at the point-of-origin for food wastes. Sizing recommendations are
given in general terms. Actual capacities vary depending on the type of food waste.
2500-over Contact your Food Service Consultant or InSinkErator
For special applications, such as supermarkets or other heavy, continuous volume installations, select Models SS-750 or SS-1000
10 Stainless Steel Models from ½ H.P. to 10 H.P. in three basic sizes.
SS-50 to SS-125 SS-150 to SS-200 SS-300 to SS-1000
The Emerson logo is a trademark and servicemark of Emerson Electric Co.
InSinkErator is a division of Emerson Electric Co.
F188-06E-19-02 ©InSinkErator 2006
