Inspectron INS003 Remote Inspection Tool User Manual

Inspectron Inc. Remote Inspection Tool

User Manual

Draft Compliance StatementUSAThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may causeundesired operation.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating in-structions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmit-ter, except in accordance with FCC multi-transmitter product procedures.This equipment has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15 of the FCC rules. These limits are de-signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television re-ception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the fol-lowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Consult the dealer for help.Use of shielded cable is required to comply with Class A limits in Subpart B of Part 15 of the FCC rules.CanadaThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deuxconditions suivantes : 1) l‘appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d‘en compromettre le fonctionnement.NOTE:Changes or modifications not expressively approved by the party responsible for compliance could void the user‘s authority to operate the equipment.WarrantyLimited One (1) Year Warranty Inspectron (the “Seller”) warrants only to the original purchaser that under normal use, care andservice, the Equipment (except as otherwise provided herein) shall be free from defects in material and workmanship for one yearfrom the date of original invoice. SELLER’S OBLIGATIONS UNDER THIS WARRANTY ARE LIMITED SOLELY TO THEREPAIR OR, AT SELLER’S OPTION,REPLACEMENT OF EQUIPMENT OR PARTS WHICH TO SELLER’S SATISFACTIONARE DETERMINED TO BE DEFECTIVE AND WHICH ARE NECESSARY IN SELLER’S JUDGMENT, TO RETURN THISEQUIPMENT TO GOOD OPERATING CONDITION. NO OTHER WARRANTIES, EXPRESS OR IMPLIED OR STATUTORY,INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, SHALL APPLY AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. Thiswarranty does not cover (and separate charges for parts, labor and related expenses shall apply to) any damage to, malfunctioning, inoperability or improper operation of the Equipment caused by, resulting from or attributable to (A) abuse, misuse or tampering;(B)alteration, modification or adjustment of the Equipment by other than Seller’s authorized represent atives; (C) installation, repair ormaintenance (other than specified operator maintenance) of the Equipment or related equipment, attachments, peripherals or optionalfeatures by other than Seller’s authorized representatives; (D) improper or negligent use, application, operation, care, cleaning, storageor handling; (E) fire, water, wind, lightening or other natural causes; (F) adverse environmental conditions, including, withoutlimitation, excessive heat, moisture, corrosive elements, or dust or other air contaminants, radio frequency interference, electric powerfailure, power line voltages beyond those specified for the Equipment, unusual physical, electrical or electromagnetic stress and/orother condition outside of Seller’s environmental specifications;(G) use of Equipment in combination or connection with otherequipment, attachments, supplies or consumable not manufactured or supplied by Seller; or (H) failure to comply with any applicablefederal, state or local regulation, requirement or specification governing emission analyzers and related supplies or consumables.Repairs or replacements qualifying under this Warranty will be performed on regular business days during Seller’s normal workinghours within a reasonable time following purchaser’s request. All requests for Warranty service must be made during the statedwarranty period. This Warranty is nontransferable.

Navigation menu