Intec IXBLIVET Wireless XBOX Live Game Controller User Manual

Intec Inc. Wireless XBOX Live Game Controller

User Manual

Download: Intec IXBLIVET Wireless XBOX Live Game Controller User Manual
Mirror Download [FCC.gov]Intec IXBLIVET Wireless XBOX Live Game Controller User Manual
Document ID553865
Application IDuMcPsm7/UsRYbm/8HFElZg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.33kB (16592 bits)
Date Submitted2005-06-21 00:00:00
Date Available2005-06-21 00:00:00
Creation Date2005-06-14 00:56:10
Producing SoftwareAcrobat Distiller 6.0.1 (Windows)
Document Lastmod2005-06-14 00:56:10
Document Titleuntitled

THE INSTRUCTION FOR XBOX LIVE+GAMEPAD
I.Feature:
1. High technology of CMOS.
2. Working Voltage: 3.5V-6V(3 AAA or 4 AAA valid battery).
3. Working Current: 100mA(the VOICE is on),70mA(the VOICE is off).
4. Wireless transmit frequency: 2.4G.
5. Wireless transmit agreement: Blue Tooth
6. The valid operation distance: 7M.
7. 12-bit ADC inside.
8. Supporting dual-vibration mode.
9. Have “Turbo” function( can’t adjust the speed).
10. The battery lifetime(1800mAh battery): up to 5 hours during vibration, up to 8
hours during no-vibration.
11. The vibration can be exchanged into three levels.
12. 4 LED display on transmitter: Link,Turbo,Mute. 1 LED dispaly on receiver: Link.
II.Operating instructions:
1. Turn on the TV&XBOX console.
2. Place the XBOX game CD into the XBOX console.
3. Open the battery cover at the back of controller&put 3 AAA batteries into it,
insert the headset into the headset jack, turn on the power switch, then
CONNECT LED on the controller will flash.
4. Insert the signal cable on the receiver into the relative game port, the CONNECT
LED on the receiver will flash.
5. After several minutes, if the CONNECT LED on the transmitter&receiver turn to
illuminate, which shows the connection is OK, and you can start to play the game.
6. If the CONNECT LED on the transmitter&receiver still flash after a long
time ,which means the connection is lost, pls restart the above process.
III. Function instruction:
(I)
LIVE function
1. Effect: if the played game have the LIVE function, also already connected
with another console through network, so you can turn on the voice function
while you play with your parter.
2. Operation and instruction: press&hold the MUTE key for above 3 minutes,
then the voice function is on, so the MUTE LED will turn to green; restart to
press and hold the MUTE key, the voice function is off and MUTE LED is
off.
(II)
MUTE function
1. Effect: when start the VOICE function, if you don’t want your parter to hear
your sound, you can turn off the mike through the MUTE function.
2. Operation&instruction: while the VOICE is on, press the MUTE key, then
the green MUTE LED turn to red, the mike function is off; press the MUTE
key again, The red MUTE LED turn to green, the mike function is on.
(III) HEADSET volume adjust function
You can adjust the HEADSET sound volume by VOLUME button
(IV) VIBRATION function
1. Operation: you can set up the intension both for vibration and
non-vibration through VIB SW, the intension (from left to right) is:
non-vibration----the left&right motor will vibrate by 50%
intension----the left&right motor will vibrate by 100% intension.
(V)
TURBO function
Total have A.B.X.Y.BLACK.WHITE.LT.RT 8 keys to be set into TURBO
function.
1. Operation&instruction:
a. Press&hold TURBO key, then press the keys to be set up, so the
keys will have TURBO function, TURBO LED will flash, un-press
this key, the TURBO LED will illuminate, press again TURBO key,
and the TURBO function is deleted.
b. Can set up several keys into TURBO function at same time.
c. When the pressed keys have been already set into TURBO function,
so the keys will fire ceaselessly, the TURBO LED will flash at the
speed of 16HZ.
d. If any keys are to be set into TURBO function when you have not
pressed any keys, so the TURBO LED will illuminate, otherwise it
will be off.
2. Adjust the speed.
The fixed speed is 16HZ.
WARNING:
1.Do not submerge in water.
2.Do not disassociate any part of Gamepad & Host
3.Do not place heavy objects on top of Gamepad & Host
4.Do not allow small children to play with Gamepad & Host unsupervised.
5.Do not use this controller in any other way than its intended use.
6.Do not unplug Host while the console is turned on.
7.Keep away from areas where dirt or liquid can get into Gamepad & Host
8.Keep away from extreme temperatures
9.Store in areas away from dust and humidity
10.Turn off or discontinue use of Vibration function if you have anyhand or wrist
ailments or if you have any injury’s to which the vibration creates discomfort
to you in anyway.
The users manual for an intentional or unintentional radiator shall caution the user that changes
or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:3d4f728c-9df9-4008-bf40-c4afafee4939
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Modify Date                     : 2005:06:14 00:56:10+08:00
Create Date                     : 2005:06:14 00:56:10+08:00
Document ID                     : uuid:892ee7b3-38aa-4a95-972b-943942b9daaf
Format                          : application/pdf
Title                           : untitled
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RDDIXBLIVET

Navigation menu