Intech Electronics CS8043 Bluetooth Stereo Pendant User Manual MCB 8043010 0A to Jacky

In Tech Electronics Ltd Bluetooth Stereo Pendant MCB 8043010 0A to Jacky

manual

1. Pairinga. Follow the Pairing process [ C ] to pair the Pendant and the USB Bluetoothdongle.b. After successful pairing, turn the Pendant off.c. Follow the pairing process [ A ] to pair the Pendant and the Bluetooth mobilephone.d. After successful pairing, please follow the PC Bluetooth application programinstructions to re-establish the Bluetooth connection between the Bluetoothdongle and the Pendant.e. All three devices are in Standby Mode and the LED's should flash green.2. Listening to musica. Follow the Listen to music process [ C ] to enjoy the music.3. Monitoring mobile phone callsa. Follow the in [ A ] to monitor phone calls[Advance function]This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one of the followingmeasures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.This equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment. To maintain compliance with FCC RF exposure compliancerequirements, please avoid direct contact to the transmitting antenna duringtransmitting.IMPORTANT NOTE:FCC Radiation Exposure Statement:IMPORTANT NOTE:This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter.

Navigation menu