Intech Electronics CS8110 Bluetooth Car Kit User Manual BT70RD 2007

In Tech Electronics Ltd Bluetooth Car Kit BT70RD 2007

Contents

Manual 2

MicEnvironmentalfriendlyLD 77ALCD Display for Cigarette PlugandVisortypeCarKitForUser Manual1Table of Contents1. BT70RD profile and its functions..........................................31.1. Profile..................................................................................32. How to mount the BT70RD in the car....................................53 . LCD Display status ..............................................................53 .1. On / Off and Pairing..............................................................53 .2. Calling in.............................................................................73.3. Calling out..........................................................................83.4 On Line................................................................................94. Federal Communication Commission Interference Statement...11.122Note: LD 77A is a standard feature for BT 70RD.341. profile and its functionsBT70RD1.1. Profile(Fig.1)2Phone 1 icon Phone 2 icon3Mute icon4Battery icon71Built-in Microphone(for BT70PD andBT70RD only)6Metal Standwith 2-side tapeFig. 152.How to mount the BT70RD in the carUse the Alcohol Pad to clean the surface of a desired position on the top of thedashboard.●●●●Use the 2-side tape to attach the metal stand on the cleaned area.Put the BT70RD into an appropriate position(Refer to Fig.4)Slide the LCD to the metal stand. 6BT70RD1.Attach the metal stand to the desiredposition.2.Put the BT70PD/BT70RD into the CigaretteSocket.3.Slide the LCD77A LCD display into themetal stand.73. LCD Display statusWhen the LCD Display unit is properly connected to a Car Kit,it will provide youwith the status of the Car Kit’s operations. For detailed operations, pleaserefer to the appropriate user manuals..1.On/OffandPairingCar Kit3After the car kit has been poweredon, it will stay on idle. Before it isconnected to the mobile phone,theLCD screen displays “READY”.When the Car Kit is in pairing mode,the LCD screen displays “PAIRING”S1 S3 S3S4S1 S3 S3S48While the car kit is connecting to themobile phone, the LCD screen disp-lays “CONNECTING .”After the car kit has connected to themobile phone successfully, the LCDscreen displays “CONNECTED”.If you press the ON / OFF key for about5 seconds to turn off the car kit,the LCDscreen displays“OFF for a few secondsbefore it is completely off.”S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4LCD Display for Cigarette Plug and Visor types of Car KitsThank you for using LD 77A LCD Display unit. This LCD Display unit is designed tobe an optional accessory to BT 77AD Visor type car kit and a standard feature ofBT 70PD and BT70RD Cigarette Plug type car kits. It provides useful informationof the car kits including Caller ID of incoming calls and other operational status.CS8118Y2RMicFig. 4The backlight will be on automatically for 10 seconds when there is an incoming call orwhen any key operations are performed directly from the car kit.key operations are performed from the mobile phones.Note that the backlightwill not be turned on whenTMCS8118Y2R (BT70RD)Abe / CS8118Y2R (BT70RD)PhoneVolume DownVolume up3.3. Calling outWhen there is an outgoing call from themobile phone, the LCD screen displays“CALLING”.When the call is made successfully, theLCD screen displays “ON LINE”.S1 S3 S3S4S1 S3 S3S43.2. Calling inWhen there is an incoming call, the LCDscreen displays “RINGING”, or its callerID, if it is received.Note: Some mobile phones may notdisplay Caller ID via this LCD Displayunit.When the call is answered, the LCDscreen displays“ON LINE”.If the call is rejected, it will go back toidle state and the LCD screen displays“CONNECTED”.Or Caller IDS1 S3 S3S4S1 S3 S3S4S1 S3 S3S4S1 S3 S3S4CS8118Y2R / Abe
1011When you are talking on line, the LCDscreen displays “ON LINE”.Whenever the Volume Up key or VolumeDown key is pressed, the LCD screendisplays “ VOL ” and the current volumesetting for 2 seconds.3.4 On LineS1 S3 S3S4S1 S3 S3S4If you mute the microphone, the muteicon will be turned on. And it stays onuntil you cancel it.S1 S3 S3S4129When the call is ended, it will go back tothe idle state. The LCD screen displays“CONNECTED”.When there is another call incomingwhile you are on line, the LCD screenwill show“CALL WAITING”or its CallerID,ifitisreceived.Note: Some mobile phones may notdisplay “CALL WAITING” or Caller IDvia this LCD Display unit.Or Caller IDS1 S3 S3S4S1 S3 S3S4S1 S3 S3S4TMAbe / CS8118Y2R (BT70RD)Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatTo which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operatethis equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operatinginstructions for satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction with anyother antenna or transmitter.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment should be installed andoperated with minimum distance20cmbetween the radiator & your body.This transmitter must not be co-located or operating in conjunction withany other antenna or transmitter.

Navigation menu