Intech Electronics CS8120 Bluetooth Headset User Manual 8120 20070202

In Tech Electronics Ltd Bluetooth Headset 8120 20070202

Manual

12345678ABCDEABCE12345678DA3PART NOMCB-8059050-0B.: MODELCS 120:8DRAWN:LucyDATE:02/02/2007PAPER SIZE:A3UNIT:MMSCALE:11::DESCRIPTION#USE MANUALIn Tech Electronics Ltd-.!Ear Hook orientationIf you want to change the orientation of ear hook, please follow the following steps.1) Detach the ear hook from the Headset2) Select the orientation you want (left or right), and attach the ear hook and lock it2Bluetooth®HeadsetUser ManualUser ManualE13User ManualHeadset pictures..............................................................................................................1Charging the battery.........................................................................................................1Turning on the Headset....................................................................................................1Turning off the Headset....................................................................................................1Putting Headset in Pairing Mode......................................................................................2Establishing Link..............................................................................................2Answering incoming calls.................................................................................................2Transferring calls..............................................................................................................2Muting the microphone.....................................................................................................2Ending calls.....................................................................................................................3To make a new call using voice dialing.............................................................................3Redialing last dialed number............................................................................................3Rejecting incoming call.....................................................................................................3Adjusting speaker volume................................................................................................3Ear Hook orientation........................................................................................................3Bend the ear hook to fit your ear.......................................................................................4Putting way.......................................................................................................................4Low-battery indication......................................................................................................4Charging and recharging the battery.................................................................................4Charging Connection Diagrams......................................................................................5Voice Over Internet Protocol (VOIP) Application...............................................................5FCC Interference Statement.............................................................................................6BluetoothOn Off S1/()Volume Up (S2)Volume Down S3()LEDDC Socket MicrophoneSpeakerEar hookLockUser ManualBT 25EM!!Charging the batteryTurning on the HeadsetTurning off the HeadsetThank you for buying new BT 25EM Headset. Before first time use, it isimportant to charge the battery for 6 hours.While the Headset (HS) is powered down, press and hold S1 until Blue LED turn on.A low tone followed by a high tone will indicate that the HS is powered up.While the HS is powered up, press and hold S1 until red LED on. A high tonefollowed by a low tone will indicate that the HS is powered downBluetooth!!!!!Putting Headset in Pairing ModeEstablishing Bluetooth LinkAnswering Incoming CallsTransferring CallsMuting the microphoneMake sure the HS is fully charged and charging cable disconnected from it beforepairing starts. While the HS is powered off, press and hold S1 until red and blueLEDs flash alternately It indicates the HS is Pairing Mode.Follow the operating instructions for your mobile phone to start thepairing process. Typically, this has to be done by going to a setup or connectmenu and then selecting the options to discover devices.may take several seconds to establish a connection.Your phone’s display should indicate that it has found the “BT 25EM” headset andasks if you want to pair it. You should confirm this. The phone’s display wouldprompt you for a passkey or PIN. Enter a sequence of “0000”.The headset LED will flash Blue every 3 seconds, indicating successful pairing.Usually the phone will also ask whether you want to change the headset s name.We recommend you should approve the BT 25EM name and not change it. Youcan pair as many headsets and devices as you wish in your mobile phone.If pairing does not occur as expected. Turn the headset and phone off and wait for10 seconds. Turn the headset and phone on again and repeat all steps frombeginning.After pairing, the mobile phone will show “connect”, then please select “YES” toestablish the link. Now you are ready to make and answer calls on the HS. Forother phones, please follow the operation manual to establish the link.When an incoming call is present, the HS will ring. Pressing S1 will answer thecall. The blue LED will continue to flash fast while the call is in session. (Onceevery second)(For Nokia 3650 or equivalent models)When you are in session, calls can be transferred from the phone to theHS and from the HS to the phone.To transfer a call from the phone to the HS: press S1 once, the call willbe transferred to the HS.To transfer a call from HS to the phone, please follow the operatinginstructions of your phone.Pressing both S2 and S3 buttons simultaneously for about a second, themicrophone will be muted. A periodic beep tone will be heard while the mutefunction is active.When the microphone is muted, press on both S2 and S3 buttons simultaneouslywill end the mute function and the periodic beep tone will stop..'BluetoothBluetooth BluetoothBluetoothBluetoothBluetoothBluetoothTo mute the microphone during an active callTo end the mute function!!!Ending CallsTo make a new call using voice dialingRedialing last dialed numberRejecting incoming callAdjusting Speaker VolumeWhile a call is in session on the Headset, pressing S1 will disconnect the call.After the call is disconnected, the blue LED will flash normally.1.Make sure the voice dialing function is probably set up in the Mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the tones on the mobile phone, make a voice dial as you normally wouldby saying the name of the person on the HS. The call will be connected in a fewseconds.1.Make sure the voice dialing function is probably set up in the mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the tones on the mobile phone, make a voice dial as you normally wouldand the call will be connected in a few seconds.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)To redial the last dialed number, press and hold S3 for 1 seconds. 4 tones willindicate an attempt to redial.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)When there is an incoming call and you want to reject it, press the buttons S1 andhold it until you hear 2 tones, then release it.While a call is in session, pressing and releasing S2 will increase the speakervolume; pressing and releasing S3 will decrease the speaker volume on the HSThere is a key tone to indicate volume increase or decrease.When using a Bluetooth mobile phone:When using a mobile phone without Bluetooth built-in and requiring a Bluetoothdongle:.!!!200.00 mm270.00 mmTMCS8120 / Abe
12345678ABCDEABCE12345678DA3PART NOMCB-8059050-0B.: MODELCS 120:8DRAWN:LucyDATE:02/02/2007PAPER SIZE:A3UNIT:MMSCALE:11::DESCRIPTION#USE MANUALIn Tech Electronics Ltd-.!Bend the ear hook to fit your ear1. Put on the headset with the ear hook behind your ear.2. Bend the ear hook gently to fit your ear.Notice: Make sure the microphone is pointing towards your mouth.DISCLAIMER: Talk time and stand-by time of the BT 25EM Headset will vary dependingon mobile phone model being usedBluetooth!Putting way54!!Low-battery indicationCharging and recharging the batteryThe HS LED will flash red instead of blue when the battery is low.There will also be beep periodically. When the battery level is too low, the HS willautomatically power off. It cannot be powered on again unless the charger isconnected.To recharge the battery, connect the charger cable to the HS. During recharging,the LED shows a steady red light.When the battery is fully charged, the indicatorsof red will be off.ACAdaptorAC MainsCar charger!Charging Connection(2) Car charging(1) A/C chargingNOTEBQB CE and FCC approved:,.UB 22S USB Dongle and BT 25EM HeadsetVoice Over Internet Protocol (VOIP) ApplicationBluetooth BluetoothPlug the UB 22S USB Dongle (purchased separately) into the USB socket ofaPC.Install IVT BlueSoleil application from the CD-ROM provided in the UB 22Spackage. Note that the CD-ROM is not available in the BT 25EM package.Download from the corresponding websites and install MSN messenger, Netmeeting,Yahoo messenger, or ICQ application software in the PC.Pairing: Put the BT 25EM Headset into pairing mode by following the stepsin the BT 25EM User Manual, start the BlueSoleil application and pair the UB 22SDongle with the BT 25EM Headset. The Headset passkey is 0000Connecting and Disconnecting: The UB 22S Dongle will ring the BT 25EM Headset.Please press the S1 key on the headset to confirm the connection request. Todisconnect the link, press the S1 key again. You can now pair andreconnect your BT 25EM Headset to your mobile phone, if you desire.Testing the Link: After the UB 22S Dongle is paired with the BT 25EMHeadset, the PC audio will be automatically routed to the Audio driver.Play some music on the PC by Windows Media Player or other music applications; youshould be able to hear the music on the Headset. If you can’ hear it, then go theontrol Panel -> ound and Audio Device Properties -> udio -> ound playbackselect the Audio to activate the link.Now you can start using the VOIP application and talk to your friend through yourheadset wirelessly and freely.Connecting BT 25EM Headset back to your mobile phone.Please follow the steps from ‘Putting Headset in Pairing Mode’ to ‘EstablishingLink’ on page 2.BluetoothBluetoothBluetoothBluetoothBluetoothBluetoothluetoothluetoothBluetooth BluetoothBluetooth.tcS ASBB“”“”“”“”“ ”“”“ ”“”1.2.3.4.5.6.7.8.270.00 mm200.00 mmFederal Communication Commission Interference Statement----This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operating instructionsfor satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.
12345678ABCDEABCE12345678D3200.00 mm270.00 mm12Bluetooth®HeadsetUser ManualBT 25RM!!Charging the batteryTurning on the HeadsetTurning off the HeadsetThank you for buying new BT 25RM Headset. Before first time use, it isimportant to charge the battery for 6 hours.While the Headset (HS) is powered down, press and hold S1 until Blue LED turn on.A low tone followed by a high tone will indicate that the HS is powered up.While the HS is powered up, press and hold S1 until red LED on. A high tonefollowed by a low tone will indicate that the HS is powered downBluetooth!On Off S1/()Volume Up (S2)Volume Down S3()LEDDC Socket MicrophoneSpeakerEar hookLock!!!!Putting Headset in Pairing ModeEstablishing Bluetooth LinkAnswering Incoming CallsTransferring CallsMuting the microphoneMake sure the HS is fully charged and charging cable disconnected from it beforepairing starts. While the HS is powered off, press and hold S1 until red and blueLEDs flash alternately It indicates the HS is Pairing Mode.Follow the operating instructions for your mobile phone to start thepairing process. Typically, this has to be done by going to a setup or connectmenu and then selecting the options to discover devices.may take several seconds to establish a connection.Your phone’s display should indicate that it has found the “BT 25RM” headset andasks if you want to pair it. You should confirm this. The phone’s display wouldprompt you for a passkey or PIN. Enter a sequence of “0000”.The headset LED will flash blue every 3 seconds, indicating successful pairing.Usually the phone will also ask whether you want to change the headset s name.We recommend you should approve the BT 25RM name and not change it. Youcan pair as many headsets and devices as you wish in your mobile phone.If pairing does not occur as expected. Turn the headset and phone off and wait for10 seconds. Turn the headset and phone on again and repeat all steps frombeginning.After pairing, the mobile phone will show “connect”, then please select “YES” toestablish the link. Now you are ready to make and answer calls on the HS. Forother phones, please follow the operation manual to establish the link.When an incoming call is present, the HS will ring. Pressing S1 will answer thecall. The blue LED will continue to flash fast while the call is in session. (Onceevery second)(For Nokia 3650 or equivalent models)When you are in session, calls can be transferred from the phone to theHS and from the HS to the phone.To transfer a call from the phone to the HS: press S1 once, the call willbe transferred to the HS.To transfer a call from HS to the phone, please follow the operatinginstructions of your phone.Pressing both S2 and S3 buttons simultaneously for about a second, themicrophone will be muted. A periodic beep tone will be heard while the mutefunction is active.When the microphone is muted, press on both S2 and S3 buttons simultaneouslywill end the mute function and the periodic beep tone will stop..'BluetoothBluetooth BluetoothBluetoothBluetoothBluetoothBluetoothTo mute the microphone during an active callTo end the mute function!!!Ending CallsTo make a new call using voice dialingRedialing last dialed numberRejecting incoming callAdjusting Speaker VolumeWhile a call is in session on the Headset, pressing S1 will disconnect the call.After the call is disconnected, the blue LED will flash normally.1.Make sure the voice dialing function is probably set up in the Mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the tones on the mobile phone, make a voice dial as you normally wouldby saying the name of the person on the HS. The call will be connected in a fewseconds.1.Make sure the voice dialing function is probably set up in the mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the tones on the mobile phone, make a voice dial as you normally wouldand the call will be connected in a few seconds.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)To redial the last dialed number, press and hold S3 for 1 seconds. 4 tones willindicate an attempt to redial.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)When there is an incoming call and you want to reject it, press the buttons S1 andhold it until you hear 2 tones, then release it.While a call is in session, pressing and releasing S2 will increase the speakervolume; pressing and releasing S3 will decrease the speaker volume on the HSThere is a key tone to indicate volume increase or decrease.When using a Bluetooth mobile phone:When using a mobile phone without Bluetooth built-in and requiring a Bluetoothdongle:.!!!!Ear Hook orientationIf you want to change the orientation of ear hook, please follow the following steps.1) Detach the ear hook from the2) Select the orientation you want (left or right), and attach the ear hook and lock itHeadsetA3PART NOMCB-8060080-0B.:DRAWN:LUCYDATE:02/02/2007PAPER SIZE:A3UNIT:MMSCALE:11::DESCRIPTION#USE MANUAL NO LOGO()In Tech Electronics Ltd-.User ManualHeadset pictures..............................................................................................................1Charging the battery.........................................................................................................1Turning on the Headset....................................................................................................1Turning off the Headset....................................................................................................1Putting Headset in Pairing Mode......................................................................................2Establishing Link..............................................................................................2Answering incoming calls.................................................................................................2Transferring calls..............................................................................................................2Muting the microphone.....................................................................................................2Ending calls.....................................................................................................................3To make a new call using voice dialing.............................................................................3Redialing last dialed number............................................................................................3Rejecting incoming call.....................................................................................................3Adjusting speaker volume................................................................................................3Ear Hook orientation........................................................................................................3Bend the ear hook to fit your ear.......................................................................................4Putting way.......................................................................................................................4Low-battery indication......................................................................................................4Charging and recharging the battery.................................................................................4Charging Connection Diagrams......................................................................................5Voice Over Internet Protocol (VoIP) Application..............................................................5FCC Interference Statement.............................................................................................6BluetoothTMCS8120 / Abe
12345678ABCDEABCE12345678DA3PART NOMCB-8060080-0B.:DRAWN:LUCYDATE:02/02/2007PAPER SIZE:A3UNIT:MMSCALE:11::DESCRIPTION#USE MANUAL NO LOGO()In Tech Electronics Ltd-.465!Bend the ear hook to fityour ear!!Low-battery indicationCharging and recharging the batteryThe HS LED will flash red instead of blue when the battery is low.There will also be beep periodically. When the battery level is too low, the HS willautomatically power off. It cannot be powered on again unless the charger isconnected.To recharge the battery, connect the charger cable to the HS. During recharging,the LED shows a steady red light.When the battery is fully charged, the indicatorsof red will be off.1. Put on the headset with the ear hook behind your ear.2. Bend the ear hook gently to fit your ear.Notice: Make sure the microphone is pointing towards your mouth.DISCLAIMER: Talk time and stand-by time of the BT 25RM Headset will vary depending onmobile phone model being usedBluetooth!Putting wayACAdaptorAC MainsCar charger!Charging Connection Diagrams(2) Car charging(1) A/C chargingNOTEBQB CE and FCC approved:,.UB 22S USB Dongle and BT 25RM HeadsetVoice Over Internet Protocol (VoIP) ApplicationBluetooth BluetoothPlug the UB 22S USB Dongle (purchased separately) into the USB socket ofaPC.Install IVT BlueSoleil application from the CD-ROM provided in the UB 22Spackage. Note that the CD-ROM is not available in the BT 25RM package.Download from the corresponding websites and install MSN messenger, Netmeeting,Yahoo messenger, or ICQ application software in the PC.Pairing: Put the BT 25RM Headset into pairing mode by following the stepsin the BT 25RM User Manual, start the BlueSoleil application and pair the UB 22SDongle with the BT 25RM Headset. The Headset passkey is 0000Connecting and Disconnecting: The UB 22S Dongle will ring the BT 25RM Headset.Please press the S1 key on the headset to confirm the connection request. Todisconnect the link, press the S1 key again. You can now pair andreconnect your BT 25RM Headset to your mobile phone, if you desire.Testing the Link: After the UB 22S Dongle is paired with the BT 25RMHeadset, the PC audio will be automatically routed to the Audio driver.Play some music on the PC by Windows Media Player or other music applications; youshould be able to hear the music on the Headset. If you can’ hear it, then go theontrol Panel -> ound and Audio Device Properties -> udio -> ound playbackselect the Audio to activate the link.Now you can start using the VoIP application and talk to your friend through yourheadset wirelessly and freely.Connecting BT 25RM Headset back to your mobile phone.Please follow the steps from ‘Putting Headset in Pairing Mode’ to ‘EstablishingLink’ on page 2.BluetoothBluetoothBluetoothBluetoothBluetoothBluetoothluetoothluetoothBluetooth BluetoothBluetooth.tcS ASBB“”“”“”“”“ ”“”“ ”“”1.2.3.4.5.6.7.8.200.00 mm270.00 mmTMFederal Communication Commission Interference Statement----This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operating instructionsfor satisfying RF exposure compliance.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.

Navigation menu