Intech Electronics R082G4000 2.4G Wireless Laser Mouse- Dongle User Manual M 671

Intech Electronics Corp. 2.4G Wireless Laser Mouse- Dongle M 671

Users Manual

3 Check the wireless receiver is properly inserted in one of your PC’s USB
ports.
4 Insert the wireless receiver in another of your PC’s USB ports.
5 Press the button on the underside of the mouse once to re-establish the
mouse’s wireless connection with the receiver.
Important Information
Some experts believe that using any mouse or trackball may cause serious
injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or
weakness in these areas, please consult a qualified health professional
immediately.
To reduce the risk of injury, please follow these precautions:
Take frequent breaks, get up and walk around several times every hour.
Vary your tasks throughout the day.
Keep your shoulders relaxed with your elbows at your side. Position your
keyboard and mouse so you do not have to reach.
Adjust your chair and keyboard so your upper arms and wrists are straight.
Avoid resting your wrists on sharp edges.
Technical Support
Can't get started - don't worry, we're here to help you!
Nearly all the products that are returned to us as faulty are not faulty at all - they
have just not been installed properly.
If you experience any difficulty with this product, please first visit our website
www.saitek.com. The technical support area will provide you with all the
information you need to get the most out of your product and should solve any
problems you might have.
If you do not have access to the internet, or if the website cannot answer your
question, please contact your local Saitek Technical Support Team. We aim to
offer quick, comprehensive and thorough technical support to all our users so,
before you call, please make sure you have all the relevant information at hand.
To find your local Saitek Technical Support Center, please see the separate
Technical Support Center sheet that came packaged with this product.
Information for Customers in the United States
FCC Compliance and Advisory Statement
Warning: Changes or modifications to this unit not expressly approved by the
M-671 WIRELESS LASER MOUSE
System Compatibility
PC running Windows XP/XP64/Vista/Mac OS X
Installation
Powering the mouse on/off
The mouse will switch itself on when you insert new batteries. It will enter sleep
mode when not being used and can be woken simply by moving the mouse.
To switch the mouse off when not using for long periods, press and hold the
button next to the battery compartment on the underside of the mouse for three
seconds. To restart the mouse, press and hold the button for three seconds.
An LED behind the scroll wheel will flash to indicate low battery life. We suggest
you replace the batteries when this happens.
Troubleshooting
If the mouse does not work:
1 Check the batteries have not expired and are inserted properly.
2 Make sure the mouse is switched on by pressing the button on the
underside for three seconds.
2
1
Insert the wireless receiver in
one of your PC’s USB ports. With
your PC switched on, follow the
device installation wizard to
complete the installation of the
new USB device.
On the underside of the mouse,
open the battery compartment,
insert the batteries in the
compartment in the direction
shown and replace the cover.
12
party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1 This device may not cause harmful interference, and;
2 This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected;
Consult the dealer or an experienced radio/TV technician for help.
Mad Catz, Inc. 7480 Mission Valley Rd, Suite 101, San Diego, CA 92108-4406
Canada ICES-003
Operation is subject to the following two conditions:
1 This device may not cause interference, and;
2 This device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
4
3
Battery Information
2 AAA rechargeable batteries (included)
Must be disposed of properly
May explode if damaged or disposed of in fire
Do not short circuit
Importer's Declaration of Conformity
Authorised representatives address:
Saitek plc
4 West Point Row
Great Park Road
Almondsbury
Bristol
United Kingdom BS32 4QG
Identification of Equipment:
Rechargeable Wireless Notebook Mouse
Intended usage:
For home use
Conformity specification:
Reference to European harmonised standards
EN60950-1:2002
EN 300 220-3:2000
EN 301 489-3:2002
Technical Construction File Ref.: PCID/PM56
The above equipment conforms to the essential requirements of the following
directive:
1999/5/EC EC Radio and Telecom Terminal Equipment directive
The essential requirements the above equipment conforms to are:
Article 3.1a (Safety)
Article 3.1b (EMC)
Article 3.2 (Use of radio spectrum)
Limitations of frequency usage:
Countries in which this product may not be sold/used:
Signed: Andrew Young
!
1313
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS
WRITTEN LIMITED WARRANTY. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitations may not apply
to you. IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not
allow the exclusion or limitation of special, incidental or consequential
damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from
state to state.
This symbol on the product or in the instructions means that
your electrical and electronic equipment should be disposed
at the end of its life separately from your household waste.
There are separate collection systems for recycling in the
EU.
For more information, please contact the local authority or your retailer where
you purchased the product.
Position: Engineering Director
Date: 1 August 2008
Company: Saitek plc
Place: United Kingdom
Conditions of Warranty
1 Warranty period is 2 years from date of purchase with proof of purchase
submitted.
2 Operating instructions must be followed.
3 Specifically excludes any damages associated with leakage of batteries.
Note: Batteries can leak when left unused in a product for a period of time,
so it is advisable to inspect batteries regularly.
4 Product must not have been damaged as a result of defacement, misuse,
abuse, neglect, accident, destruction or alteration of the serial number,
improper electrical voltages or currents, repair, alteration or maintenance by
any person or party other than our own service facility or an authorized
service center, use or installation of non-Saitek replacement parts in the
product or the modification of this product in any way, or the incorporation of
this product into any other products, or damage to the product caused by
accident, fire, floods, lightning, or acts of God, or any use violative of
instructions furnished by Saitek plc.
5 Obligations of Saitek shall be limited to repair or replacement with the same
or similar unit, at our option. To obtain repairs under this warranty, present
the product and proof of purchase (eg, bill or invoice) to the authorized
Saitek Technical Support Center (listed on the separate sheet packaged with
this product) transportation charges prepaid. Any requirements that
conflict with any state or Federal laws, rules and/or obligations shall not be
enforceable in that particular territory and Saitek will adhere to those laws,
rules, and/or obligations.
6 When returning the product for repair, please pack it very carefully,
preferably using the original packaging materials. Please also include an
explanatory note.
7 IMPORTANT: To save yourself unnecessary cost and inconvenience, please
check carefully that you have read and followed the instructions in this
manual.
This warranty is in lieu of all other expressed warranties, obligations or
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
65
Approvals
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC NOTE
The manufacture is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to opereate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
87

Navigation menu