Integrated Display Technology P58XXB 900MHz/5.8GHz Analog Cordless Phone w. CID-Base User Manual PM5821manual 21mar p65

Download:
Mirror Download [FCC.gov]
Document ID	673565
Application ID	1rS7iFDCr4BCoGd5E1GYCg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.17kB (714632 bits)
Date Submitted	2006-06-27 00:00:00
Date Available	2006-06-27 00:00:00
Creation Date	2006-05-12 17:49:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2006-06-15 17:52:44
Document Title	PM5821manual 21mar.p65
Document Creator	PageMaker 6.5C
Document Author:	Polly

INSTRUCTION MANUAL
5.8 GHz
Cordless Telephone
with Caller ID &
Visual Call Waiting
PM5821
PM5825
PM5827
PM5805
Dual Handset
Triple Handset
Expansion Handset
The picture above depicts the dual handset model PM5825
Important
Charge the handset battery for 12 continuous hours prior to first use.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
TABLE OF CONTENTS
INTRODUCTION ................................................................................................ 4
GETTING STARTED ......................................................................................... 5
Checking package contents ............................................................................... 5
Modular jack .................................................................................................. 5
Installation tips .............................................................................................. 5
Battery setup ................................................................................................ 6
Connecting the base unit and charging the handset ...................................... 6
Connecting the charger and charging the handset (For PM5805) ................. 6
Telephone line connection ............................................................................. 7
Tone/pulse setting ......................................................................................... 7
Mounting on a wall ........................................................................................ 7
Register handsets to the main base before use ............................................ 7
To register the second handset (For PM5805) .............................................. 7
NAMES AND CONTROLS ................................................................................. 8
Handset ................................................................................................ 8
Base unit and Charger .................................................................................. 9
INITIAL PROGRAMMING ............................................................................... 10
Language setting ......................................................................................... 10
Area code setting ....................................................................................... 10
Ringer tone ................................................................................................. 10
Tone/pulse setting ....................................................................................... 10
Resetting to default ..................................................................................... 11
BASICS ........................................................................................................... 11
Receiving a call ........................................................................................... 11
Making a call ................................................................................................ 12
Volume adjustment ...................................................................................... 12
Transferring a call (For PM5805) ................................................................. 12
Ringer switch .............................................................................................. 12
Pre-dialing ................................................................................................... 13
Changing the pre-dial number ..................................................................... 13
Redialing ..................................................................................................... 13
Fast redialing ............................................................................................... 13
FLASH key .................................................................................................. 13
CH (Channel)/DEL key ................................................................................. 13
* TONE key .................................................................................................. 14
Handset locator (paging function) ............................................................... 14
MUTE key ................................................................................................... 14
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
TABLE OF CONTENTS
Low battery warning .................................................................................. 14
Voice mail indicator ..................................................................................... 15
CALLER ID FEATURES ................................................................................. 15
Caller ID with Call Waiting ............................................................................ 15
Caller ID list .................................................................................................. 16
Reviewing Caller ID list ................................................................................ 16
Formatting Caller ID numbers ....................................................................... 16
Storing Caller ID entries in the directory ....................................................... 17
Dialing a Caller ID number ............................................................................ 17
Deleting entries from the Caller list .............................................................. 17
Deleting the displayed entry ........................................................................ 17
Deleting all entries ....................................................................................... 18
DIRECTORY .................................................................................................... 18
Storing a number in the directory .............................................................. 19
Replacing a directory entry with a Caller ID entry ........................................ 19
Changing a stored number .......................................................................... 19
Making calls from the directory ................................................................... 19
Reviewing and deleting directory contents ................................................. 19
Chain dialing from the directory ................................................................... 20
CHANGING THE BATTERY .......................................................................... 20
POWER FAILURE ........................................................................................... 21
HEADSET JACK AND BELT CLIP ................................................................. 22
LIGHT SIGNALS ............................................................................................. 22
LCD SCREEN MESSAGES ........................................................................... 23
SOUND SIGNALS .......................................................................................... 24
TROUBLESHOOTING ...................................................................................... 24
MAINTENANCE ............................................................................................... 28
MAXIMIZE BATTERY PERFORMANCE ....................................................... 29
TECHNICAL INFORMATION ......................................................................... 30
FCC STATEMENT ........................................................................................... 32
CONSUMER INFORMATION .......................................................................... 33
MANUFACTURER’S WARRANTY ................................................................. 35
The exclamation point within the triangle is a warning sign alerting
you of important instructions accompanying the product.
PhoneMate and the PhoneMate logo are registered trademarks of PhoneMate
Corporation and are used under License from PhoneMate Corporation.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
INTRODUCTION
Congratulations on your purchase of this PhoneMate cordless telephone.
Your PhoneMate 5.8 GHz cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment. With proper maintenance and care, it
will provide you with years of enjoyment and convenience.
Main Features
5.8 GHz Technology
Superior Range – The use of 5.8 GHz frequency band for signal transmission
between base and handset means greater communication range compared to
conventional 43 - 49 MHz cordless telephones.
Ultra-Low Noise – The high frequency communication also has significantly
reduced noise level.
40-Channel Auto Scan – Your new telephone uses one of 40 channels in the
5.8-GHz frequency band. It automatically selects a clear channel every time you
receive or place a call on the handset.
Other features
•
•
•
•
•
• Caller ID on handset
• Compatible with Caller ID and
Visual Call Waiting
• 40 name/number Caller ID list:
name/number, time and date
• 3-line trilingual display with backlight
LCD screen
Dial back from Caller ID list
3 ringer tones
10 memory call log
Tone & pulse dialing compatible
Caller transfer (For PM5805 only)
IMPORTANT: To use all of the features of this telephone, you must subscribe to
either the standard Name/Number Caller ID Service or Caller ID with Call Waiting
Service from your telephone company. To know who is calling while you are on
the phone, you must subscribe to Caller ID with Call Waiting Service.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
GETTING STARTED
Checking package contents
Make sure your package includes the items shown here.
Base unit
Handset
Telephone
line cord
Charger
(optional)
Belt clip
Battery
AC Adaptor
Some models such as PM5825 and PM5827, may contain multiple handsets, Belt
Clips, Batteries and AC Adapters.
Modular jack
You need an RJ11 type modular phone jack. If you do not have a modular jack, call
your local phone company to find out how to get one installed.
Installation tips
Some cordless telephones operate at frequencies that may cause interference
to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV, microwave oven, or VCR. If such interference continues, move the
cordless telephone farther away from these appliances.
Certain other communications devices may also use the 5.8 GHz frequency for
communication and if not set properly these devices may interfere with each
other and/or your new telephone. If you are concerned with interference, please
refer to the owner’s manual for these devices on how to properly set channels
to avoid interference. Typical devices that may use the 5.8 GHz frequency for
communication include wireless audio/video senders, wireless computer
networks, multi-handset cordless telephone systems, and some long-range
cordless telephone systems.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
Battery setup
1.
2.
Remove the battery compartment cover on the handset, insert the battery,
plug the cord into the jack (inside the compartment) and replace the cover.
Set the handset RINGER switch to ON, and place handset in the base.
Slide down the
battery cover
Place the battery
in the slot
Plug the wire
into the jack
Slide up the
battery cover
Connecting the base unit and charging the handset
1.
2.
3.
Plug the AC adaptor into the power DC 9V
jack on the back of the base. Plug the other
end into a wall outlet.
Set the base on a desk or tabletop and place
one handset in the base unit.
Make sure that the CHARGE/IN USE LED
illuminates.
Connecting the charger and charging the handset (For PM5805)
1.
2.
Plug the AC adaptor into the power DC 9V jack
on the back of the charger. Plug the other end
into a wall outlet.
Place another handset in the charger and make
sure that the CHARGE LED illuminates.
Note: • Charge your handset at least 12
hours before plugging into the
phone line.
• Charge the handset for 12 continuous hours prior to first use. The
initial battery charge is important for best performance.
• It is normal for the handset and base to get warm when the
handset is charging in the base.
Caution: Use only the PhoneMate AC adaptor that is supplied with this
phone. Using another AC adaptor may damage the phone.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
Telephone line connection
Once the handset battery is fully charged, connect the telephone line cord to the
TEL LINE jack on the back of the base. Plug the other end into a telephone outlet.
Tone/pulse setting
1. If you have Pulse (rotary) service, you will need to set the dial mode to pulse.
If you have Touch-Tone service, do nothing as your phone has been set to
Tone prior to shipment. If you do not know which type of service you have,
contact your local telephone company.
2. To change to Pulse or Tone service, See Tone/pulse setting, page 11.
Register handsets to the main base before use
Your cordless phone uses a digital security system to provide protection
against false ringing, unauthorized access and charges to your phone
line. When you place the handset in the main base, the handset will
automatically register to the base.
To register the optional handset for models PM5805, PM5825
and PM5827.
The optional handset (charge in the extra charging cradle) must also be registered
to the main base before use.
1.
2.
3.
4.
Be sure both handsets are fully charged.
Remove the handset from the charging cradle, and place it in the main base.
Wait for at least 5 seconds before removing the handset from the main base.
After both handsets are registered, it doesn’t matter which handset is placed
in the main base or the charger.
5. The charge/in use LED lights on the main base.
Note: • After a power failure occurs or battery replacement, both handsets will
need to be re-registered. To re-register, follow the same registration
process as above.
• If the handset’s battery becomes very low, the handset must be
recharged for 12 hours and re-registered to the main base unit.
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
NAMES AND CONTROLS
Handset
1. Belt clip
11. TALK key (also used to end a call)
2. REDIAL key
12. MUTE/FORMATkey
(MUTE/FORMAT/TRANSFERkey)
3. Headset jack
13. Ringer switch
4. MEM (memory) key
14. CID/VOL (volume) up/down key
5. CH (channel)/DEL key
15. Keypad (0-9)
6. FLASH/PROG (program) key
16. * TONE/EXIT key
7. Charging contacts
17. # PAUSE key
8. Incoming call/in use LED
18. Microphone
9. Earpiece
10. LCD screen
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
NAMES AND CONTROLS
Base Unit
Charger For PM5805
1. Handset Cradle
2. Page Key
3. Charge/In Use LED
4. Charge LED
PM5821manual 21mar.p65
2006/5/12, ¤U¤È 05:49
INITIAL PROGRAMMING
Before using this telephone, 4 initial settings must be completed on the handset:
Language, Area code (this is required to use Caller ID service from your telephone company), Ringer tone, and Tone/Pulse setting.
Language setting
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG until “ 1 ENG 2 FRA 3 ESP ” shows on screen.
3. Press CID/VOL
or
, or the number keys (1 – 3) to select the desired
language.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
Area code setting
For proper Caller ID operation, you must program your area code.
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until “AREA CODE - - - ” shows on screen.
3. Enter your 3-digit area code using the number keys. To change a digit, press
CH/DEL and then re-enter the number.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
Ringer tone
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until “RINGER TONE 1” shows on screen.
3. Press CID/VOL
or , or press the number keys 1-3 to select the desired
ringer tone.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
Tone/pulse setting
1. Make sure the phone is off (not in TALK mode).
2. Press FLASH/PROG repeatedly until “ 1TONE 2 PULSE ” shows on
screen.
3. Press CID/VOL
or , or press the number keys 1-2 to select TONE
or PULSE.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
10
PM5821manual 21mar.p65
10
2006/5/12, ¤U¤È 05:49
Resetting to default
You can reset the phone programming to the initial factory default settings. The
default settings are:
Language
Area Code
Ringer Tone
Tone/Pulse Setting
English
--1
Tone
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until “DEFAULT
1 NO” shows on screen.
3. Press CID
or , or the 1 or 2 keys to select your choice between “1 NO”
and “2 YES” for Default Settings”
4. Press FLASH/PROG again to confirm. You will hear a confirmation tone.
BASICS
Receiving a call
When receiving an incoming call, the LED on the handset flashes, and the handset
will show caller information. *
* Note: A subscription is required from your local phone company to receive
Caller ID information on your phone. See Caller ID Features, page 16.
1. Press TALK to answer the call.
Note: If handset is in the base cradle, remove it from base before pressing
the TALK key. Either handset 1 or handset 2 can answer the call at once.
(for PM5805)
2. Press TALK to end your call.
Note: If you replace the handset to the base cradle or charger cradle (for
PM5805), the handset automatically hangs up.
11
PM5821manual 21mar.p65
11
2006/5/12, ¤U¤È 05:49
Making a call
1. Press TALK.
Note: If handset is in the base cradle, remove it from base before pressing
the TALK key.
2. Dial the phone number.
Call No.
Call Timer
Telephone Number
Caller Name
3. Press TALK to end your call.
Volume adjustment
The VOLUME key adjusts the volume level of the earpiece. There are 4 volume
levels.
1. Make sure the phone is in TALK mode.
2. Press the CID/VOL
or
key on the handset.
Transfer a call (For PM5805 only)
The current conversation can be transferred to another handset. Only one
handset can talk with an outside caller at a time. The second handset cannot
listen to the conversation or make an outgoing call while the other handset is in
use.
1. During a call, press and hold the MUTE/FORMAT key, until “TRANSFERRING”
shows on the screen and both handsets beep.
Note: To cancel the transfer and return to the caller, press TALK key on the
handset.
2. Press TALK on the other handset to get the call.
Note: During call transfer, if there is no further action within 2 minutes on both
handsets, the call will end.
Ringer switch
The RINGER switch must be on for the handset to ring during incoming calls.
12
PM5821manual 21mar.p65
12
2006/5/12, ¤U¤È 05:49
Pre-dialing (up to 32 digits)
1. Make sure the phone is OFF (not in TALK mode).
2. Enter the telephone number. The number is displayed as you enter it.
3. Press TALK.
Note: Pressing *TONE will exit pre-dialing.
Changing the pre-dial number
1.
2.
3.
4.
Make sure the phone is OFF.
Enter the telephone number.
Press CH/DEL to delete digits one by one.
Re-enter the number.
Redialing
1. Make sure the phone is OFF.
2. Press TALK.
3. Press REDIAL to redial the last number (up to 32 digits).
Fast redialing
1. Press TALK, (if you are not already in TALK mode).
2. Enter the telephone number you want to dial.
3. If the line is busy, press REDIAL. The phone will drop the line for two
seconds and redial again.
FLASH key
Use the FLASH/PROG key to activate custom calling services such as Call
Waiting.
Tip: Do not use TALK to activate custom calling services such as Call Waiting,
or you will hang up the phone.
CH (Channel)/DEL key
While talking, you might need to manually change the channel to get rid of static.
Press the CH/DEL key to switch to a clear channel.
13
PM5821manual 21mar.p65
13
2006/5/12, ¤U¤È 05:49
* TONE key
This feature enables Pulse service phone users to access touch-tone services
offered by banks, credit card companies, etc.
1.
2.
3.
4.
Dial the desired number.
Press *TONE after your call is answered.
Follow the voice instructions to complete your desired action.
Hang up when finished. The phone returns to Pulse service.
Handset locator (Paging function)
This feature helps to locate a misplaced handset.
1. Press PAGE on the base, the screen shows “PAGING”. The handset beeps
continuously for about 2 minutes or until you press any key on the handset.
2. To stop the paging, do one of the following:
• Press PAGE on the base.
• Press TALK, this will enter talk mode.
• Press any button on the handset.
Note: You can still page the handset with the ringer off.
MUTE key
To have a private, off-line conversation, use the MUTE feature. The caller on the
other end of the line cannot hear you, but you can still hear them.
To mute the microphone:
1. Press MUTE/FORMAT in TALK mode. The screen shows “MUTE”.
2. Press MUTE/FORMAT again to return to your phone conversation.
Low battery warning
1. If the battery is low and the phone is in TALK mode, a warning tone
consisting of 2 short beeps will sound from the handset and the LED will
flash every 15 seconds. “LOW BATTERY” shows on screen.
2. If the battery is low and the phone is in STANDBY mode, the LED on handset
will flash every 15 seconds, and “LOW BATTERY” shows on screen.
14
PM5821manual 21mar.p65
14
2006/5/12, ¤U¤È 05:49
Voice mail indicator
When you subscribe to a voice mail service offered by your phone company, the
phone alerts you when voice mail has been received. MESSAGE WAITING
appears on screen for 60 seconds when a voice mail is received. The LED on the
base flashes to indicate there is a voice mail waiting. After the voice mail has
been reviewed, MSG WAITING OFF appears on screen, and the indicator stops
flashing.
Note: The indicator does not work with your answering machine. The phone will
only work with an FSK type of VMWI System. It will not work with the Stutter Dial
Tone type of VMWI System.
CALLER ID FEATURES
This phone receives and displays incoming call information transmitted by your
local phone company, provided you subscribe to Caller ID, and/or Call Waiting
services. This information can include the phone number and/or the name, date
and time. The phone can store up to 40 calls for later review.
Caller ID with Call Waiting
When you subscribe to Caller ID with Call Waiting (Visual Call Waiting TM) service
from your phone company, you are able to see who is calling when you hear the
Call Waiting beep. Caller identification information appears on screen after you
hear the beep.
Press the FLASH/PROG key to put the current call on hold so that you can
answer the incoming call. The following information will display.
Call No.
Call Timer
Telephone Number
Caller Name
To return to the first call, press FLASH/PROG again.
IMPORTANT: To use these features you must subscribe to Caller ID with Call
Waiting Service.
15
PM5821manual 21mar.p65
15
2006/5/12, ¤U¤È 05:49
Caller ID list
The incoming caller information transmitted from the phone company is received
by your phone between the first and second ring and stored in the Caller ID list. If
you answer a call before the second ring the caller information may not be stored.
When the Caller ID list memory is full, a new call automatically replaces the oldest
call in memory. NEW appears on screen for calls received that have not been
reviewed.
Note: Check with your local phone company regarding name service
availability.
Reviewing Caller ID list
As calls are received and stored, the Caller ID list is updated to let you know how
many calls have been received.
1. Press CID/VOL
to scroll through the Caller ID list from the most recent to
the oldest.
2. Press CID/VOL
to scroll through the Caller ID list from the oldest to the
most recent.
3. Press TONE/EXIT to return to Standby Mode anytime.
Note: 1. If area code is programmed (for example 416), the whole number
(416-2225555) including area code will be shown on the screen during a call
coming from this area. When reviewed later, the area code will not be shown
(i.e. LCD shows 2225555 only). 2. You may also transfer Caller ID entries to
the directory.
See Storing caller ID entries in directory below.
Format Caller ID numbers
The MUTE/FORMAT key lets you select how many digits of the number are
displayed.
• Press MUTE/FORMAT once to add the area code (Note: The programmed
area code must match the Caller ID area code).
• Press MUTE/FORMAT again to add 1 plus the area code.
• Press MUTE/FORMAT a third time to go back to the 7-digit number.
16
PM5821manual 21mar.p65
16
2006/5/12, ¤U¤È 05:49
Storing Caller ID entries in the directory
Before storing a caller ID number, make sure the number appears in proper digits
for your dialing area. If not, change it using the MUTE/FORMAT key. For example,
if the Caller ID number appears 1-416-222-5555 but it is not a long distance
number, press MUTE/FORMAT until it shows 416-222-5555 (without 1).
Note: If a specific memory entry is longer than 15 digits, the last 15 digits
show on the screen.
1.
2.
3.
4.
Use the CID/VOL
or
key to select desired Caller ID entry.
Press MEM key, “MEMO # --” shows on the top right corner of screen.
Select the desired memory location by pressing the number keys (0-9).
If the memory location already contains name and number information,
“REPLACE MEMO?” will show on screen. Press MEM again if you want to
replace the information and save. Press *TONE/EXIT button to return unit to
standby mode without saving.
5. If the selected memory location is empty, you will hear a confirmation tone
when the new memory record is saved.
Note: If the selected CID record contains non-digit characters, or the number
is more than 24 digits, the unit will not store the record.
Dialing a Caller ID number
1. Make sure the phone is OFF (not in TALK mode).
2. Use CID
or
to scroll to the desire Caller ID entry.
3. Use MUTE/FORMAT key to display the phone number in proper
digits if necessary.
4. Press TALK. The number dials automatically.
Deleting entries from the Caller list
Use CH/DEL to erase the entry currently shown on screen or all entries.
Deleting the displayed entry
1.
2.
3.
4.
Make sure the phone is OFF (not in TALK mode).
Use the CID/VOL
or
keys to find the entry you want to delete.
While the entry is displayed, press CH/DEL. “DELETE?” shows on screen.
Press CH/DEL again to delete the entry. Confirmation tone sounds and LCD
shows “DELETED” for 2 seconds.
17
PM5821manual 21mar.p65
17
2006/5/12, ¤U¤È 05:49
Deleting all entries
1.
2.
3.
4.
Make sure the phone is OFF (not in TALK mode).
Use the CID/VOL
or
keys to display any entry.
Press and hold CH/DEL, until “DELETE ALL?” shows on screen.
Press CH/DEL again to confirm. “NO CALLS” shows on screen.
DIRECTORY
You can store up to 10 names (up to 15 characters) and numbers (up to 24 digits)
in the directory for quick dialing. If a number exceeds 24 digits, you can program
it in parts, and then chain dial the number.
Store a number in the directory
To program a number to memory:
1. Make sure the phone is OFF (not in TALK Mode).
2. Press MEM key to start the Memory Programming Mode. “MEMO # --” shows
on the screen.
3. Select the desired memory location (0 – 9) or use the CID/VOL
or
keys to find an empty memory location.
4. Press the MEM key again. The screen shows “ENTER NAME”.
5. Use the digit keys to enter the name. The cursor advances 1 space after
each key press. Within 1 second, you can press the same key again to
select another character. If you make a mistake, press CH/DEL to delete
previous characters one by one.
Key Press
1st – 5th press
2 – 6 press
–
th
3 – 7 press
4th – 8th press
’
nd
rd
th
6. Press MEM again to save the name. “ENTER TEL NUMBR” shows on screen.
7. Use the digit keys to enter the desired telephone number. If you make a
mistake, press CH/DEL to delete previous digits one by one, then enter the
correct digits. If you wish to add a pause, press PAUSE two times at the
desired location. Be sure to press it twice, or you will enter a # (number sign)
18
PM5821manual 21mar.p65
18
2006/5/12, ¤U¤È 05:49
and not a pause. Each pause counts as 1 digit in the dialing sequence. Or
you can store redial number in the directory by pressing REDIAL (Note: If the
redial number is longer than 24 digits, it cannot be stored into the memory.).
8. Press MEM again to store the number to memory. If you are replacing a
number, “REPLACE MEMO?” shows on screen. Press MEM again to confirm,
or press *TONE/EXIT to return to standby mode.
To view your directory, press MEM and use CID/VOL
(0-9) to scroll.
or
or the number
Replacing a directory entry with a Caller ID entry
Use the same procedure as for storing Caller ID entries in the directory
Changing a stored number
Use the same procedure as for storing a number in the directory
Making calls from the directory
1. Make sure the phone is ON by pressing TALK.
2. Press MEM.
3. Press the number (0 - 9) for the desired memory location. The number dials
automatically.
Or:
1. Make sure the phone is OFF (not in TALK mode).
2. Press MEM.
3. Press the number (0-9) or use CID/VOL
or
to select the desired
number.
4. Press TALK, the number will be dialed automatically.
Reviewing and deleting directory contents
1. Make sure the phone is OFF (not in TALK mode).
2. Press MEM.
3. Use CID/VOL
or
to scroll through the directory until the desired name/
number is shown, or use the number pad to select a memory location. The
selected telephone number and name show on screen.
4. While the entry is displayed, press CH/DEL to delete the entry. The screen
shows “DELETE?”
5. Press CH/DEL again to delete the entry. “DELETED” shows on screen.
19
PM5821manual 21mar.p65
19
2006/5/12, ¤U¤È 05:49
Chain dialing from the directory
Use this feature to make calls that require a sequence of numbers such as using
a calling card for a frequently called long distance number. You can dial each part
of the sequence from a different entry of the directory. The following example
shows how you can use chain dialing to make a call through a long distance
service:
The Number for:
Long distance access number
Authorization code
Frequently called long distance number
1.
2.
3.
4.
Memory Location
Make sure the phone is in TALK mode.
Press MEM and then press 7.
When you hear the access tone, press MEM and then press 8.
At the next access tone, press MEM and then 9.
Tip: Wait for the access tones before pressing the next memory key, or your
call might not go through.
CHANGING THE BATTERY
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please
replace the battery.
With normal usage, your battery should last about one year.
For a replacement battery, please contact your place of purchase or
www.phonemate.com
Caution:
• Use only the specified battery type (Ni-MH 3.6V, 600mAh).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
• Remove battery if storing the phone for over 30 days.
20
PM5821manual 21mar.p65
20
2006/5/12, ¤U¤È 05:49
Make sure the telephone is off before you replace the battery.
1. Slide off the battery compartment cover.
2. Disconnect the battery plug from the jack in the compartment and remove the
battery pack.
3. Insert the new battery pack and connect the cord into the jack.
Note: Please refer to the pictures on page 6, “Battery setup” for guide.
4. Put the battery compartment cover back on.
5. Place handset on the base to charge for 12 hours.
Note: If the handset battery is removed for more than 5 minutes, the directory
memory and caller ID memory will be erased.
Charge the handset battery for 12 continuous hours prior to first use. The initial
battery charge is important for best performance.
Caution: To reduce the risk of fire or personal injury, use a NI-MH 3.6 V, 600mAh
battery.
Replacement part number: 001-800369-30105
POWER FAILURE
When power is off, you will not be able to make or receive calls with the
telephone.
After a power outage, place the handset in the base for about 20 seconds
to reset the digital security code.
21
PM5821manual 21mar.p65
21
2006/5/12, ¤U¤È 05:49
HEADSET JACK AND BELT CLIP
Headset connection (Headset not included)
For hands free conversation, connect the headset
(not included) to the HEADSET jack. The handset
earpiece and microphone are disabled when the
headset is connected. Press TALK to answer or
place a call while using the headset.
Belt clip installation
• Attach the belt clip by inserting the sides of the
belt clip into the slots.
• Snap the ends of the belt clip into place.
LIGHT SIGNALS
The charge/in use & incoming call/in use indicator will change under the following
conditions.
CHARGE/IN USE LED on the base
Talking
Lit steadily
Charging
Lit steadily
Incoming call
Flashes in same pattern as telephone ring
Paging
Flashes every 0.5 second
Voice mail
Flashes every 1 second
INCOMING CALL/IN USE LED on the handset
Talking
Lit steadily
Paging
Flashes every 1 second
Low battery
Flashes every 15 seconds
Incoming call
Flashes in same pattern as telephone ring
22
PM5821manual 21mar.p65
22
2006/5/12, ¤U¤È 05:49
LCD SCREEN MESSAGES
The following indicators show the status of a message or of the phone.
BLOCKED NUMBER/
NAME/CALLER
TRANSFERRING..
EMPTY
ERROR
ENTER NAME
ENTER TEL NUMBR
DELETE ALL?
DELETE?
END OF LIST
HANDSET 1
HANDSET 2
HANDSET 3
HANDSET 4
INCOMPLETE DATA
MESSAGE WAITING
NEW CALL
NO CALLS
NO DATA
REPT
UNKNOWN NUMBER/
NAME/CALLER
PAGING
RINGER=OFF
The person is calling from a number that has been
blocked from transmission.
A call transfer from one handset to another handset
(For PM5805).
There is no record stored to the selected directory
location.
Caller information has been interrupted during transmission or the phone is excessively noisy.
Prompt telling you to enter name in directory.
Prompt to enter the telephone number for directory.
Prompt asking you if you want to erase all Caller ID
information.
Prompt asking you if you want to erase the current
Caller ID entry or a directory entry that is shown on
screen.
Indicates that there is no additional information in Caller
ID list.
This handset is handset 1 (For use with model PM5821).
This handset is handset 2 (For use with models
PM5805 and PM5825).
This handset is handset 3 (For use with models
PM5827)
This handset is handset 4 (For that are using 4
handsets)
The telephone provider did not send all Caller ID
information because the signal was weak or the call
was interrupted.
Caller has left a message (you must subscribe to voice
mail service offered by your local phone company for
this to work).
Indicates call or calls have not been reviewed.
There are no Caller ID records stored to memory.
No Caller ID information was received.
Repeat call.
The incoming call is from an area not serviced by Caller
ID, or the information was not sent.
Someone has pressed the PAGE key on the base.
Ringer ON/OFF switch on the right side is set to OFF.
23
PM5821manual 21mar.p65
23
2006/5/12, ¤U¤È 05:49
SOUND SIGNALS
A long warbling tone
Signals an incoming call
Single Tone
A key is pressed
Three short beeps
Error tone
Two long beeps
Confirmation tone
One short beep and one long beep
Page signal
Three beeps every 2 seconds
Transfer signal
Two short beeps every 15 seconds
Low battery warning
TROUBLESHOOTING
CALLER ID
No display
• Is battery fully charged? Try replacing the battery.
• Make sure that the base is connected to a non-switched AC outlet.
Disconnect the base from the plug and plug it in again.
• Did you order Caller ID service from your local telephone company?
The display will not work unless you do this.
Caller ID error message
• The phone displays this message if it detects anything other than valid
Caller ID information during the silent period after the first ring. This
message indicates either the presence of noise on the line, or that an
invalid message has been sent from the telephone company.
The Handset does not display the Caller ID information
• Check with your local telephone company to ensure that the Caller ID or Call
Waiting Caller ID service is subscribed to and is functioning properly.
• If you answer the call before the first ring has been completed, the Caller ID
information may have not been completely received by your PhoneMate
phone.
• If you are using the additional handset(s) PM5805, try re-registering it to the
PM5821 base as described in the manual.
Telephone Numbers are not being correctly dialed from the Caller ID memory
• Ensure that the number displayed is in the correct format and that if the area
code and/or a "1" are included in the dialing process.
24
PM5821manual 21mar.p65
24
2006/5/12, ¤U¤È 05:49
• When you press a button from the keypad, you should hear the confirmation
"beep" from the PM5821 or PM5805, and also the tone or pulse (depending on
your dialling method) that actually dials the number. Try dialling more slowly
and ensure you hear both of these sounds. If not try pressing the same
number again.
My handset(s) have static noise
• Try re-registering the handset to the PM5821 base unit as described in the
manual.
TELEPHONE
No dial tone
Check installation:
- Is the base power cord connected to a working outlet?
- Is the telephone line cord connected to the base unit and the wall jack?
• Disconnect the base from the wall jack and connect another phone to the
same jack. If there is no dial tone in the second phone, the problem might be
your wiring or local service.
• Is the handset out of range of the base?
• Make sure the battery is properly charged (12 continuous hours).
• Is the battery pack installed correctly?
• Did the handset beep when you pressed TALK? Did the CHARGE/IN USE
indicator come on? The battery may need to be charged.
Dial tone is OK, but cannot dial out
• Make sure the TONE/PULSE dialing mode is set to TONE or PULSE
according to your phone service.
Handset does not ring
• Make sure the RINGER switch on the handset is turned to ON.
• You may have too many extension phones on your line. Try unplugging
some phones.
• See solutions for No dial tone.
You experience static, noise, or fading in and out
• Change channels.
• Is handset out of range? Move closer to the base.
If you hear 3 short beeps when you press TALK, you are out of range.
• Does the base need to be relocated?
25
PM5821manual 21mar.p65
25
2006/5/12, ¤U¤È 05:49
• Charge battery.
• Make sure base is not plugged into an outlet with another household
appliance.
Phone beeps
• Place handset in base for a minimum of 20 seconds to reset the security
code. If that does not work, charge battery for 12 continuous hours.
• Clean charging contacts on handset and base with a soft cloth or an
eraser.
• See solutions for No dial tone.
• Replace battery.
Dialing from Memory
• Did you program the directory keys correctly?
• Did you follow proper dialing sequence?
• Make sure the TONE/PULSE dialing mode is set to TONE or PULSE
according to your phone service.
• Did you reprogram directory after a power outage or battery replacement?
Charge / In Use LED on base keeps flasing
• Provided your phone company offers voice mail indicator service and you
subscribe to it, the CHARGE/IN USE LED flashes when the phone is in use
to indicate there is a message waiting. It stops flashing after the message
has been reviewed.
No dial tone/phone will not dial out
• Check that the AC power adapter is plugged into a working AC power outlet.
• Check all telephone cord connections or try another wall jack
• Do a basic reset of the phone: Disconnect the phone from the wall and
remove the battery for 30 minutes and then re-install as instructed by the
manual.
• Try other phones in the house to ensure it is not a line problem with the
telephone company.
• Was the battery charged for at least 12 - 15 hours?
• Is the "LOW BATTERY INDICATOR" on?
Can’t hear the ring signal
• Check the ringer volume controls; verify that the switch is not set to "Off".
• Check that the AC power adapter is plugged into a working AC power outlet.
• Check all telephone cord connections or try another wall jack.
26
PM5821manual 21mar.p65
26
2006/5/12, ¤U¤È 05:49
Can’t receive or make phone calls
• Check if the phone is set to the correct type of service, either Tone or Pulse
• Check that the AC power adapter is plugged into a working AC power outlet.
• Check all telephone cord connections or try another wall jack
• Check to make sure that the Battery is properly installed and connected
There are continuous short beeps instead of a dial tone when the handset is far
from the base.
• The beeps are a warning that you are too far away from the base. Move
closer to the base.
The Charge Light will not come on when the handset is placed in the base unit.
• Check to ensure sure that the AC Adapter is plugged into the base unit and an
operating wall outlet.
• Ensure sure that the handset is properly seated in the base unit
• Ensure that the rechargeable battery pack is properly connected in the
handset.
The Caller’s voice is too low or quiet.
• Adjust the receiver Volume Control on the handset to a higher setting
Telephone Numbers are not being correctly dialed from the Caller ID memory.
• Ensure that the number displayed is in the correct format and that if the area
code and/or a "1" are included in the dialing process.
I have misplaced my Handset.
1. Press Page on the base. If the handset is within range, a triple beep will
sound for 50 seconds.
2. Place the handset back into the base or press the CH key on the handset, or
press any other handset key twice, to stop the page/find feature.
I am having difficulty in placing and/or receiving calls.
• If you experience difficulty with placing or receiving calls, a lost security code
may be the cause of the problem. When this occurs, the handset can no
longer communicate with the base. Reset by placing the handset on the base
for 5-10 seconds. If that does not work, unplug the AC adapter from the wall
outlet. Disconnect the handset battery for 5-10 seconds and then reconnect.
Place the handset back on the base and then replug the AC adapter.
• If you are using the additional handset(s) PM5805, try re-registering it to the
PM5821 base as described in the manual.
27
PM5821manual 21mar.p65
27
2006/5/12, ¤U¤È 05:49
Causes of poor reception
• Aluminum siding.
• Foil backing on insulation.
• Heating ducts and other metal construction can shield radio signals.
• You are too close to appliances such as microwaves, stoves, computers, etc.
• Atmospheric conditions, such as strong storms.
• Base is installed in the basement or lower floor of the house.
• Base is plugged into an AC outlet with other electronic devices.
• Baby monitor is using the same frequency.
• Handset battery is low.
• You are out of range of the base.
MAINTENANCE
To keep your telephone working and looking good, follow these guidelines:
• Avoid putting the phone near heating appliances and devices that
generate electrical noise (for example, motors or fluorescent lamps).
• Do not expose to direct sunlight or moisture.
• Avoid dropping the phone, and other rough treatment to the phone.
• Clean the phone with a soft cloth.
• Never use a strong cleaning agent or abrasive powder because this will
damage the finish.
• Periodically clean the charge contacts on the handset and base with a
clean pencil eraser.
• Retain the original packaging and your original sales receipt in case you need
to ship the phone at a later date.
28
PM5821manual 21mar.p65
28
2006/5/12, ¤U¤È 05:49
MAXIMIZE BATTERY PERFORMANCE
The freedom that your cordless telephone can offer is fully dependent on the
performance of the rechargeable battery in the handset. To maximize the battery
performance, follow these guidelines:
Charge it for a full 12 hours
Before initial use of your new battery, charge it for 12 hours continuously. The
proper initial charging is very important to maximize the battery performance.
Keep the contacts clean
You can never fully recharge the battery if the contacts are dirty. Clean all the
contacts - two at the bottom of the handset and two in the base cradle periodically. Use a clean pencil eraser or superfine steelwool to clean the
charging contacts. Avoid touching the cabinet area of the phone, or scratches
may occur.
Refresh battery
If your battery seems to need recharging more often than usual, it may have lost
part of its charging capacity. To bring back its full capacity, try “refreshing” the
battery:
1. First discharge the battery by leaving the handset in TALK mode until Battery
Low indication turns on. (Disconnect the base from the telephone line, so that
your line is not busy all the time.)
2. Then charge it for 12 continuous hours.
3. Repeat the above once more. As your PhoneMate PM5821, PM5825, PM5827
and PM5805 products use a Ni-MH battery you are free to leave your handset
in the base charger for as long as you like, without effecting the performance
of the battery life.
29
PM5821manual 21mar.p65
29
2006/5/12, ¤U¤È 05:49
TECHNICAL INFORMATION
REN Number:
interpreted as a defect of the phone.
The Ringer Equivalence Number (REN)
assigned to each terminal’s device
provides an indication of the maximum
number of terminals allowed to be
connected to a telephone interface.
2. RANGE
Because radio frequencies are used,
the location of the base station can
affect the operating range of the
phone. Try several locations and
choose the one that gives the
clearest signal to the handset.
(Turning in a circle while holding the
handset may also increase the
operating range.)
The REN number of this phone is
located on the bottom of the base unit.
The termination on an interface may
consist of any combination of device
subject only to the requirement that
the sum of the Ringer Equivalence
Numbers of all the devices does not
exceed 5.
3. INTERFERENCE
Electronic circuits activate a relay to
connect the unit to your telephone
line. These electronic circuits operate
in the radio frequency spectrum.
While several protection circuits are
used to prevent unwanted signals,
there may be periods when these
unwanted signals enter the base
station. You may hear a click or hear
the relay activate when you are not
using the cordless handset. If this
occurs frequently, you can minimize
or eliminate the problem by lowering
the height of the base station or
relocating the base station. It may also
be helpful to change the operating
channel and/or the security code
setting.
CAUTION
This product is intended for use in the
USA and CANADA only. Sale or use
in other countries may violate local
laws.
Cordless telephones use radio
frequencies to allow mobility. This
affects the performance of your
phone.
1. NOISE
Electrical pulse noise is present in
most homes at one time or another.
This is most intense during electrical
storms. Certain kinds of electrical
equipment, such as light dimmers,
fluorescent bulbs, motors, fans, etc.,
also generate pulse noise.
Operation is subject to the following
two conditions: (1) this device may
not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
Because radio frequencies are
susceptible to this, you may on
occasion hear pulse noise through
the handset. This is usually only a
minor annoyance and should not be
30
PM5821manual 21mar.p65
30
2006/5/12, ¤U¤È 05:49
TECHNICAL INFORMATION
NOTICE:
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request that the user disconnect the
equipment.
Privacy of communications may not be
ensured when using this telephone.
Other devices, including other
cordless telephones, may interfere
with the operation of this cordless
telephone or cause noise during
operation. Units without coded
access may be accessed by other
radio communication systems.
Cordless telephones must not cause
interference to any licensed radio
service.
The user should ensure for his own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution
may be particularly important in rural
areas.
The Industry Canada Label identifies
certified equipment. This certification
means that the equipment meets
certain telecommunications network
protective, operational and safety
requirements. The ministry does not
guarantee that the equipment will
operate to the user’s satisfaction.
CAUTION
Users should not attempt to make such
connections themselves, but should
contact the appropriate electrical
inspection authority, or electrician, as
appropriate.
Before installing this equipment, users
should ensure that it is permissible to
be connected to the facilities of the
local telecommunications company.
The equipment must also be installed
using an acceptable method of
construction. In some cases, the
company’s inside wiring associated
with single-line individual service may
be extended by means of a certified
connector assembly (telephone
extension cord). The customer should
be aware that compliance with the
above conditions may not prevent
degradation of service in some
situations.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying the product.
This symbol on the product is used to
identify the following important
information. Use only with specified
PHONEMATE power adaptor.
NOTICE: This equipment meets the
applicable Industry Canada Terminal
TECHNICAL INFORMATION
31
PM5821manual 21mar.p65
31
2006/5/12, ¤U¤È 05:49
TECHNICAL INFORMATION
Equipment Technical Specifications.
This is confirmed by the registration
number. The abbreviation, IC, before
registration number signifies that
registration was performed based on
a Declaration of Conformity indicating
that Industry Canada technical
specifications were met. It does not
imply that Industry Canada approved
the equipment.
FCC STATEMENT
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is needed.
• Consult the dealer or an experienced
radio/TV technician for help.
Warning: Changes or modifications
to this unit not expressly approved by
the party responsible for compliance
could void the user’s authority to
operate the equipment.
NOTE: This equipment has been
tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
However, there is no guarantee that
interference will not occur in a
particular installation. If this equipment
does cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
Privacy of communications may not be
ensured when using this phone.
This equipment is hearing aid compatible.
32
PM5821manual 21mar.p65
32
2006/5/12, ¤U¤È 05:49
CONSUMER INFORMATION
for this product is part of the product
identifier that has the format
US:KT5W400BPM58XX. The digits represented by 0.0B are the REN without
a decimal point (e.g., 03 is a REN of 0.3).
For earlier products, the REN is separately shown on the label].
This equipment complies with Part 68
of the FCC rules and the requirements
adopted by the ACTA. On the bottom of
this equipment is a label that contains,
among other information, a product
identifier in the format
US: KT5W400BPM58XX. If requested,
this number must be provided to the
telephone company.
If this equipment PM5821causes harm
to the telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service
may be required. But if advance notice
isn’t practical, the telephone company
will notify the customer as soon as
possible. Also, you will be advised of
your right to file a complaint with the FCC
if you believe it is necessary.
An applicable certification jack Universal
Service Order Codes (USOC) for the
equipment is provided (i.e., RJ11C) in the
packaging with each piece of approved
terminal equipment.
A plug and jack used to connect this
equipment to the premises’ wiring and
telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed
to connect to a compatible modular jack
that is also compliant. See installation instructions for details.
The telephone company may make
changes in its facilities, equipment, operations or procedures that could affect
the operation of this equipment. If this
happens the telephone company will
provide advance notice in order for you
to make necessary modifications to maintain uninterrupted service.
The REN is used to determine the number of devices that may be connected to
a telephone line. Excessive RENs on a
telephone line may result in the device
not ringing in response to an incoming
call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To
be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local telephone company. [For products
approved after July 23, 2001, the REN
Should you experience trouble with this
equipment, please contact:
www.phonemate.com
Minneapolis Service Center
10901 Louisiana Ave. So.
Bloomington, MN
USA
55438
for repair or warranty information. If
the equipment is causing harm to the
telephone network, the telephone
company may request that you
33
PM5821manual 21mar.p65
33
2006/5/12, ¤U¤È 05:49
NOTICE According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes,
are very destructive to telephone
equipment connected to AC power
sources. To minimize damage from
these types of surges, a surge
arrestor is recommended.
disconnect the equipment until the
problem is resolved.
Please follow instructions for repairing
if needed (e.g. REPLACING THE
BATTERY section); otherwise do not
alter or repair any parts of the device
except where specified.
Connection to party line service is
subject to state tariffs. Contact the
state public utility commission, public
service commission or corporation
commission for information.
NOTICE If your home has specially
wired alarm equipment connected to
the telephone line, ensure the installation of this PM5821 does not disable
your alarm equipment. If you have
questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
34
PM5821manual 21mar.p65
34
2006/5/12, ¤U¤È 05:49
MANUFACTURER’S WARRANTY
WARRANTY APPLICATION
WHAT IS NOT COVERED
This product purchased new, unused
in the USA and Canada through an
authorized PhoneMate dealer are
warranted against manufacturing
defects in materials and workmanship
for 6 months covering parts and
labour, from the date of purchase by
the original retail purchaser. This
warranty only applies in favour of the
original retail purchaser of the
warranted product.
a. Products purchased outside of the
USA and Canada.
b. Communications products
purchased in a used condition.
c. Communications products
purchased from non PhoneMate
authorized dealer.
d. Communications products not
intended for use in the USA and
Canada or products without
appropriate Canadian and USA
regulatory approvals.
e. Problem due to product set-up and
installation.
f. Adjustments that are outlined in
the Operating Manual.
g. Accessory items including antenna
and batteries.
h. Damage in or due to transportation.
i. Damage due to improper
maintenance, accident, abuse,
misuse or negligence.
j. Damage caused by lightning and
power surges.
During the warranty period, Manufacturer will repair, or at our option,
replace a Communications product
which shows evidence of a manufacturing defect in materials or
workmanship. Replacement PARTS
are warranted for the remaining
portion of the warranty period.
35
PM5821manual 21mar.p65
35
2006/5/12, ¤U¤È 05:49
MANUFACTURER’S WARRANTY
ORIGINAL RETAIL
PURCHASER’S RESPONSIBILITY
the use of this product.
STATUTORY WARRANTIES
The above provisions do not
preclude the operation of an
applicable state or provincial statute
which in certain circumstances may
not allow some of the limitations and
exclusions described in this
warranty. Where any terms of this
warranty are prohibited by such a
statute, they shall be deemed null
and void but the remainder of this
warranty shall remain in effect.
You, the original retail purchaser,
must present your original, dated billof-sale together with this warranty to
your original Point of Purchase or an
authorized Service Depot when you
make a claim under this warranty
claim.
You, the original retail purchaser, are
responsible for any costs of
TRANSPORTING the product to your
Point of Purchase or authorized
Service Depot. You also are responsible for the cost of any MAINTENANCE necessary in respect of the
product.
HOW TO OBTAIN WARRANTY
SERVICE
Please contact the PhoneMate
Authorized Dealer from whom the
product was purchased, or contact
us directly at:
WARRANTY BECOMES VOID
www.phonemate.com
Minneapolis Service Center
10901 Louisiana Ave. So.
Bloomington, MN
USA
55438
This warranty becomes void if the
product’s serial numbers are altered
or removed or if any repair to the
product is made other than by
PhoneMate or by an authorized
Service Depot.
LIMITATIONS
a. PHONEMATE reserves the
right to change or improve the
design of the model of the product
warranted hereunder without
incurring any obligation to make any
modifications to or to install any
improvement in or on the product.
b. In no event shall PHONEMATE or
any of its Authorized
Dealers be liable for special or
consequential damage arising from
36
PM5821manual 21mar.p65
36
2006/5/12, ¤U¤È 05:49
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may not apply to your particular product;
however, when using telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire,electric shock and
injury to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Telephones should not be used while you are in a bathtub, shower or
pool. Immersion of the telephone or handset in water could cause an
electrical shock.
5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing
the product on the bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation unless proper ventilation
is provided.
6. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.
8. Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
9. Never push objects of any kind into this product through cabinet slots
as they may touch dangerous voltage points or short out parts that
could result in a risk of fire or electric shock. Never spill liquid of any
kind on the product.
10.To reduce the risk of electric shock, do not disassemble this product,
but take it to a qualified serviceman when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the telephone equipment is subsequently used.
11. Do not expose the product to extreme temperatures such as areas
near a hot radiator or stove or in a hot car.
12. Do not place lighted candles, cigarettes, cigars, etc., on the telephone.
13. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
14. Never install or modify telephone wiring during a lightning storm.
15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
16. Use caution when installing or modifying telephone lines to prevent
electrical shock and/or fire.
17. Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If the product has been exposed to rain or water.
C. If the product does not operate normally by following the operating
instructions.
D. If the product’s cabinet has been damaged.
E. If the product exhibits a distinct change in performance.
18.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from
lightning.
19. Do not use the telephone to report a gas leak in the vicinity of the leak.
20.Do not place this product on an unstable cart, stand or table.
The product may fall, causing serious damage to the product.
21. For servicing or replacement, you can purchase a suitable headset
through service center or retailer shop.
22. Plug the adaptor to the socket-outlet which is nearest the equipment
and shall be easily accessible.
IF YOUR PRODUCT UTILIZES BATTERIES, THE
FOLLOWING ADDITIONAL PRECAUTIONS SHOULD
BE OBSERVED:
CAUTION: Risk of explosion if battey is replaced by an incorrect type.
1. Use only the type and size battery(ies) specified in the user manual.
2. Do not dispose of the battery(ies) in fire. They may explode.
Check with local codes for possible special disposal instructions.
3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling battery(ies) in order not to short out the
battery(ies) with conducting materials such as rings, bracelets, and
keys. The battery(ies) or conductor may overheat and cause burns.
5. Do not attempt to recharge the battery(ies) provided with or identified
for use with this product that are not intended to be recharged. The
battery(ies) may leak corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the battery(ies) provided with or identified
for use with this product by heating them. Sudden release of the
battery(ies) electrolyte may occur causing burns or irritation to eyes or
skin.
7. When replacing battery(ies), all batteries should be replaced at the
same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies).
(Applies to products employing more than one separately replaceable
primary battery.)
8. When inserting battery(ies) into this product, the proper polarity or
direction must be observed. Reverse insertion of battery(ies) can
cause charging, and that may result in leakage or explosion.
9. Remove battery(ies) from this product if storing over 30 days because
the battery(ies) could leak and damage the product.
10.Discard “dead” battery(ies) as soon as possible since “dead” batteries
are more likely to leak in a product.
11. Do not store this product, or the battery(ies) provided with or identified
for use with this product, in high-temperature areas.Batteries that are
stored in a freezer or refrigerator for the purpose of extending shelf life
should be protected from condensation during storage and defrosting.
Batteries should be stabilized at room temperature prior to use after
cold storage.
12. If your product uses rechargeable battery(ies), charge the battery(ies)
only in accordance with the instructions and limitation specified in the
User Manual.
Use only with Class 2 power source 9VDC 300mA for base
unit and 9VDC 200mA for charger unit.
SAVE THESE INSTRUCTIONS
Printed in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2006:05:12 17:49:32+01:00
Creator Tool                    : PageMaker 6.5C
Modify Date                     : 2006:06:15 17:52:44+08:00
Metadata Date                   : 2006:06:15 17:52:44+08:00
Format                          : application/pdf
Title                           : PM5821manual 21mar.p65
Creator                         : Polly
Document ID                     : uuid:3d632d92-fedc-4518-b2eb-b25a2f4440b3
Instance ID                     : uuid:6bad828b-b41d-4b76-aee3-00409f57ea29
Has XFA                         : No
Page Count                      : 37
Author                          : Polly

EXIF Metadata provided by EXIF.tools