Integrated Microwave Technologies 23GP2-L5 Video Booster Amplifier User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	779569
Application ID	4i9CBAQn1c2csw71RMAJug==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.46kB (80810 bits)
Date Submitted	2007-04-12 00:00:00
Date Available	2007-04-12 00:00:00
Creation Date	2007-04-10 12:49:46
Producing Software	GNU Ghostscript 7.05
Document Lastmod	2007-04-10 12:50:05
Document Title	Microsoft Word - M13-0002-00A.GoPac.revDp3.MANUAL.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	mhardy

GoPac
1.
2.
3.
4.
5.
Table of Contents
Description & Features...................................................................................................9
1.1
Description.........................................................................................................9
1.2
Features ..............................................................................................................9
Theory of Operation .......................................................................................................11
Specifications .................................................................................................................13
Installation ......................................................................................................................15
4.1
Unpacking and Inspection ..................................................................................15
4.2
Mechanical Installation ......................................................................................15
Operation ........................................................................................................................19
5.1
CONTROLS AND INDICATORS ...................................................................19
5.2
POWER ON / OFF (1).......................................................................................19
5.3
RF MODE (2) ....................................................................................................19
5.4
STATUS LEDS (3)............................................................................................19
5.5
Power Up............................................................................................................19
5.6
NORMAL SCREEN ..........................................................................................19
5.7
RF SETUP..........................................................................................................20
5.8
RF OUPUT POWER..........................................................................................20
5.9
ALARMS ...........................................................................................................20
Figures
Figure 1: System Block Diagram...........................................................................................12
Figure 2: GoPac Guide Pins & RF Connectors .....................................................................16
Figure 3: GoPac fitted with RF cables...................................................................................16
Figure 4: Input Power & Breakers location ..........................................................................17
Figure 5: Input Power Connector pinout ...............................................................................17
Figure 6: GoPac Front Panel..................................................................................................19
Figure 7: Controls & Indicators .............................................................................................19
Figure 8: Normal Screen ........................................................................................................19
Figure 9: RF INPUT LOW ....................................................................................................20
M13-0002-00A Rev D.3
User Manual
GoPac
Document Revision
Date Modified
April 9, 2007
D.2
April 10, 2007
D.3
Revision
M13-0002-00A Rev D.3
Modified by
M Hardy
Modification Detail
Added extra FCC language
M Hardy
Added RF Exposure warning
User Manual
GoPac
M13-0002-00A Rev D.3
User Manual
GoPac
Description& Features
1. DESCRIPTION & FEATURES
POWER OUTPUT
Typically camera back transmitters are limited
to less than 250 mW of output power, limiting
their range. For extended range operation, the
GoPac docking station/amplifier outputs up to
5W digital (optional up to 8W digital).
1.1 DESCRIPTION
The GoPac is a multi-functional transmitter
docking station and amplifier, designed
specifically to provide extended range
operation for low power camera back
transmitters, however the GoPac can also be
used with units other than camera back
transmitters.
POWER SOURCES
A camera back transmitter can be mounted
onto the GoPac using standard Anton Bauer
Battery (or IDX) mounting clips, and the RF
output is routed to the GoPac input via N-type
connectors. If desired, the two units can be
separated up to 100 feet using SF214 RF
cable. In either configuration, an appropriate
antenna either attaches directly to the RF
output of the GoPac, or can be remoted using
RF cable.
The standard GoPac is pre-configured for
either single or dual band operation, with
coverage of the following US frequency
bands:
• 1.99 – 2.70 GHz
• 6.40 – 7.10 GHz
A camera back transmitter can be attached to
the GoPac and be powered via the integrated
IDX (Sony “V" clip) or Anton Bauer battery
adapter plates.
STANDBY MODE
The GoPac has a rotary switch for selecting
the unit to Standby mode; however an
integrated detector circuit inhibits the GoPac
from transmitting in the absence of an RF
signal from the external device.
In Standby Mode the RF output is muted. If
an external RF source is applied to the input
connector, rotating the GoPac selector switch
to one of the transmit modes will result in an
instantaneous on-frequency transmission.
Other frequency coverage may be available,
please contact Nucomm for specifics.
INTERNAL SELF-TEST
This manual is written in general form to
cover all typical configurations and options
for the GoPac.
The GoPac has a built-in self-test feature,
which checks the unit for functionality and
several internal parameters. Should an error
or malfunction be detected, the red alarm LED
will illuminate and an alarm message will be
displayed on the LCD.
1.2 FEATURES
The GoPac was specifically designed to
support ultra portable ENG.
M13-0002-00A Rev D.3
The GoPac features a built-in universal power
supply which operates on power ranging from
90 to 240 VAC (40 to 60Hz), or +11 to +32
VDC without the need for internal jumpers or
switch settings.
User Manual
GoPac
M13-0002-00A Rev D.3
Description& Features
10
User Manual

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:04:10 12:50:05-07:00
Create Date                     : 2007:04:10 12:49:46-07:00
Title                           : Microsoft Word - M13-0002-00A.GoPac.revDp3.MANUAL.doc
Author                          : mhardy
Creator                         : PScript5.dll Version 5.2
Producer                        : GNU Ghostscript 7.05
Page Count                      : 5
Mod Date                        : 2007:04:10 12:50:05-07:00
Creation Date                   : 2007:04:10 12:49:46-07:00
Metadata Date                   : 2007:04:10 12:50:05-07:00

EXIF Metadata provided by EXIF.tools