Intel 18265NG Intel Tri Band Wireless-AC 18265 User Manual Intel Wireless Gigabit v2 6
Intel Mobile Communications Intel Tri Band Wireless-AC 18265 Intel Wireless Gigabit v2 6
Intel >
Contents
- 1. User Manual Regulatory Guide
- 2. User Manual
User Manual Regulatory Guide
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3197650 |
| Application ID | c4Xd2DU1QBZLxex4FmKVlA== |
| Document Description | User Manual Regulatory Guide |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 149.51kB (1868905 bits) |
| Date Submitted | 2016-11-16 00:00:00 |
| Date Available | 2017-05-15 00:00:00 |
| Creation Date | 2016-05-17 14:15:31 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-11-07 17:56:51 |
| Document Title | Intel® Wireless Gigabit v2.6 |
| Document Creator | Acrobat PDFMaker 15 for Word |
| Document Author: | Intel Corporation |
Intel® Wireless Gigabit v2.6 User Guide May 2016 Revision 3.9 Intel Confidential Document Number: 537178-3.9 Notice: This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use, duplication, or disclosure is subject to restrictions stated in Intel’s Software License Agreement, or in the case of software delivered to the government, in accordance with the software license agreement as defined in FAR 52.227-7013. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. The code names presented in this document are only for use by Intel to identify products, technologies, or services in development that have not been made commercially available to the public, i.e., announced, launched, or shipped. They are not "commercial" names for products or services and are not intended to function as trademarks. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm. Intel is a trademark of Intel Corporation or in the US and other countries. * Other brands and names may be claimed as the property of others. Copyright © 2016 Intel Corporation. All rights reserved. Intel® Wireless Gigabit v2.6 User Guide Intel Confidential May 2016 Document Number: 537178-3.9 Contents Introduction ................................................................................................................. 8 1.1 Scope ................................................................................................................. 8 1.2 References .......................................................................................................... 8 1.3 Wireless docking .................................................................................................. 8 1.3.1 “Place to Dock, Snap to Go” experience .................................................. 8 1.3.2 Wireless Docking (WiDock) and Wireless Display (WiDi) ............................ 8 1.3.3 Wireless peripheral .............................................................................. 9 1.4 Key features ........................................................................................................ 9 1.5 SW and HW deliverables........................................................................................ 9 1.6 Notebook platform preparations for WiDock ............................................................. 9 1.7 Known limitations ................................................................................................. 9 Software Install .......................................................................................................... 10 2.1 NB-side installation .............................................................................................. 10 WiGig Application User Manual for Windows 7*/8*/8.1* ........................................... 13 3.1 User manual ....................................................................................................... 13 3.1.1 Launch the Intel® Wireless Dock Manager .............................................. 13 3.1.2 Make the first connection ..................................................................... 13 3.1.3 Automatic connection default ............................................................... 16 3.1.4 Automatic connections......................................................................... 17 3.1.5 Manually connect to a dock .................................................................. 17 3.1.6 Automatic connection in S3 (depends on BIOS configuration) ................... 18 3.1.7 Automatic connection in connected standby ........................................... 18 3.1.8 Disconnect from the dock .................................................................... 19 3.1.9 PIN-based pairing ............................................................................... 21 3.1.10 Disable and enable WiGig..................................................................... 22 3.2 Change dock settings ........................................................................................... 23 3.3 Dock software update .......................................................................................... 25 3.3.1 Update during connection .................................................................... 25 3.4 Diagnostic information ......................................................................................... 27 3.4.1 Details ............................................................................................... 28 3.5 Manage docks ..................................................................................................... 29 3.6 Notification messages .......................................................................................... 31 3.6.1 Unable to Connect............................................................................... 31 3.6.2 No Available Docks Found .................................................................... 31 3.6.3 Weak Connection ................................................................................ 32 3.6.4 WiGig is Not Working........................................................................... 32 3.6.5 WiGig disabled: critical temperature ...................................................... 34 3.6.6 WiGig disabled by hardware RF kill switch .............................................. 34 3.6.7 WiGig disabled by airplane mode .......................................................... 35 WiGig Application User Manual for Windows 10* ....................................................... 36 4.1 User manual ....................................................................................................... 36 4.1.1 Launch the Intel® Wireless Dock Manager .............................................. 36 4.1.2 Make the first connection ..................................................................... 36 4.1.3 Automatic connection default ............................................................... 41 4.1.4 Automatic connections......................................................................... 41 4.1.5 Manually connect to a dock .................................................................. 42 4.1.6 Automatic connection in S3 (depends on BIOS configuration) ................... 42 4.1.7 Automatic connection in connected standby ........................................... 42 4.1.8 Disconnect from the dock .................................................................... 43 4.1.9 PIN-based pairing ............................................................................... 43 May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 4.1.10 Disable and enable WiGig..................................................................... 43 Change dock settings ........................................................................................... 43 Dock software update .......................................................................................... 43 Diagnostic information ......................................................................................... 44 Manage docks ..................................................................................................... 44 Notification messages .......................................................................................... 45 4.6.1 Not found .......................................................................................... 45 4.6.2 Try connecting your device again .......................................................... 46 4.6.3 Couldn’t connect ................................................................................. 47 4.6.4 Weak connection ................................................................................ 47 4.6.5 WiGig disabled: critical temperature ...................................................... 48 4.6.6 WiGig is Not Working........................................................................... 49 The Wireless Dock and Multiple Displays .................................................................... 50 5.1 Intel® WiGig A/V wireless capabilities ..................................................................... 50 5.1.1 Intel® WiGig DisplayPort Bandwidth and other limitations ........................ 50 5.2 User experience when connecting more than two displays to the wireless dock ........... 50 WiGig events in Windows Event Viewer ...................................................................... 53 6.1 WiGig Event Properties ......................................................................................... 53 6.2 WiGig Event Data ................................................................................................ 53 6.3 Accessing WiGig Events Log .................................................................................. 53 4.2 4.3 4.4 4.5 4.6 Intel® Wireless Gigabit v2.6 User Guide Intel Confidential May 2016 Document Number: 537178-3.9 Figures Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1-1 2-1 2-2 2-3 2-4 2-5 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 3-24 3-25 3-26 3-27 3-28 3-29 3-30 3-31 3-32 4-1 4-2 4-3 4-4 4-5 4-6 4-7 4-8 4-9 4-10 4-11 WiDock use models ............................................................................................ 9 End User License Agreement dialog box...............................................................10 Success message ..............................................................................................10 Windows security message ................................................................................11 Product Improvement Program dialog box ...........................................................11 Changing Intel® Product Improvement Program selection ......................................12 Tray icon indications .........................................................................................13 Welcome OSD message .....................................................................................14 Dock select ......................................................................................................14 Dock confirmation message ...............................................................................15 Dock confirmation OSD .....................................................................................15 Dock connected message ...................................................................................16 Automatically Connect to this Dock message ........................................................16 Disabling the auto-connect setting ......................................................................17 Manual dock connection.....................................................................................18 Dock disconnection mesage ...............................................................................19 Manual disconnect option ...................................................................................20 Ready to connect message.................................................................................20 Enabling PIN-based pairing ................................................................................21 PIN-based pairing in OSD ..................................................................................22 Disable WiGig using the gear icon .......................................................................22 Disable WiGig warning message .........................................................................23 WiGig disabled confirmation message ..................................................................23 Dock Management button ..................................................................................24 Dock management dialog box ............................................................................24 Dock software Update Required message.............................................................26 OSD Update Required message ..........................................................................26 Dock update progress .......................................................................................27 OSD update progress message ...........................................................................27 Advanced diagnostics window.............................................................................28 Choosing Manage Remembered Docks.................................................................30 Manage Remembered Docks auto-connect feature ................................................30 Unable to Connect message ...............................................................................31 No Available Docks Found message .....................................................................31 Weak Connection message.................................................................................32 WiGig is Not Working message (with example error code 0x1000) ..........................32 WiGig disabled due to overheating message .........................................................34 WiGig disabled by hardware RF kill switch message...............................................34 WiGig disabled by airplane mode message ...........................................................35 Welcome OSD message .....................................................................................37 Network & Internet page showing Airplane mode settings ......................................37 Action Center link .............................................................................................38 Connect pane ...................................................................................................38 Connect pane during connecting stage ................................................................39 Connect OSD message ......................................................................................40 Dock connected message ...................................................................................40 Dock connected OSD message ...........................................................................41 Disable the auto connect setting .........................................................................42 WiGig disabled confirmation message ..................................................................43 Dock update required toast ................................................................................44 May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 4-12 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 5-1 5-2 5-3 Remove device button .......................................................................................44 Remove device approval dialog box.....................................................................45 Device not found message .................................................................................45 Try connecting your device again message ..........................................................46 Couldn’t connect message .................................................................................47 Weak connection toast ......................................................................................48 Weak connection message in Dock Manager .........................................................48 WiGig disabled due to overheating toast ..............................................................48 WiGig disabled due to overheating message in Dock Manager ................................49 DisplayPort topology viewer ...............................................................................51 Windows Screen Resolution control panel ............................................................52 Graphics control panel .......................................................................................52 Tables Table 1–1 Table 3–1 Table 6–1 References ........................................................................................................ 8 Error code cases and possible recovery methods ..................................................33 List of groups for Task Category parameter in WiGig Events ...................................53 Intel® Wireless Gigabit v2.6 User Guide Intel Confidential May 2016 Document Number: 537178-3.9 Revision History Revision Description Date 1.0 Initial release. May 16, 2013 1.1 Alpha update November 25, 2013 2.0 Beta update April 9, 2014 2.1 Beta 1.5 update June 30, 2014 2.2 Beta 2 update September 11, 2014 2.3 Chapter 2.2 flashing dock instructions October 23, 2014 3.0 PV version updates November 26, 2014 3.1 Added 4.1.1. Maple Peak DisplayPort Bandwidth and other limitations January 8, 2015 3.2 SW version 2.0 March 30, 2015 3.3 Added win10 user guide August 5, 2015 3.4 Update sections 1.2 & 3.4 October 27, 2015 3.5 Update Intel Product Improvement Program (chapter 2) December 2, 2015 Update to v2.2 3.6 Updated welcome screen and no scanning time after disconnect March, 12, 2016 3.7 Added WiGig events in Windows Event Viewer, added Pin based pairing capability April, 17, 2016 3.8 Update section 3.1.9 May 1, 2016 3.9 Update section 3.1.9 with additional info on PIN based pairing May 10, 2016 § May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide Introduction Introduction This chapter provides an overview of the Intel® Wireless Gigabit (WiGig) solution, which comprises the Intel® Tri-Band Wireless-AC17265 (Client), Intel® Tri-Band Wireless-AC18265 (Client), the Intel® Wireless Gigabit Sink W13100 (Dock), and the Intel® Wireless Gigabit Antenna-M 10041/2R (Antenna). 1.1 Scope This document familiarizes customers with the Intel® WiGig software (SW) solution components and provides installation and configuration details. 1.2 References Table 1–1 References Document name Description Ref 1 537180_Maple_Peak_External_Product_Specification Maple Peak External Product Specifications (EPS) _Rev.3.1 Ref 2 557654_Maple_Peak_WiGig_SNK_EPS_Rev1.0 Maple Peak WiGig SNK External Product Specifications (EPS) Ref 3 557232_WiGig_RFEM_External_Product_Specification_Rev1.0 WiGig R-FEM External Product Specifications (EPS) Ref 4 553630_Intel_Wireless_Douglas_Peak_and_Pine_Pea Douglas Peak and Pine Peak External Product k_EPS_Rev1.0 Specifications (EPS) Ref 5 545844_Intel_WiGig_Maple_Peak _API_SDK Rev3.0 Ref 6 557869_Intel_Wireless_TriDouglas Peak and Pine Peak Platform Design Band_18260_DgP_WiGig_W11000_PnP_PDG_Rev2.0 Guidelines Ref 7 Intel_Wireless_Gigabit_DFCDFB_Tool_User_Guide_Rev3.3 1.3 WiGig SDK Package DFC and DFB Tools User Guide Wireless docking The main use of Intel® WiGig at product launch is wireless docking in conjunction with the Maple Peak SNK. Wireless docking generally occurs when the user is working 2–4 feet from the display(s). The user experiences the same kind of responsiveness as operating a workstation/desktop. 1.3.1 “Place to Dock, Snap to Go” experience Wireless docking is designed to minimize user actions. After the initial WPS-based pairing, the typical user is able to auto-dock, meaning the device automatically connects to the dock and peripheral when in range of the dock. In other words, by the time the device is on the desk, it is already docked. Undocking is as simple, allowing the user to grab the device and walk away. 1.3.2 Wireless Docking (WiDock) and Wireless Display (WiDi) WiDock differs from other models, such as Miracast* or Intel® Wireless Display, in which the user is further from the screen (such as on the couch or in a conference room), and is focused on content Intel® Wireless Gigabit v2.6 User Guide Intel Confidential May 2016 Document Number: 537178-3.9 Introduction consumption (watching a video, sharing a screen with others, gaming) rather than productivity or content creation. Figure 1-1 WiDock use models 1.3.3 Wireless peripheral The wireless peripheral feature allows a device to interact with high-speed USB peripherals over WiGig. For example, a directly attached storage device equipped with Maple Peak SNK would allow a high-speed USB 3.0 connection with Intel WiGig equipped tablet or notebook. When connecting, many of the wireless docking capabilities would be applicable (excluding of course the display capabilities), allowing USB 3.0 like throughputs (>1 Gbps) for on-desk distances. 1.4 Key features See Ref 4 (EPS document). 1.5 SW and HW deliverables See Ref 4 (EPS document). 1.6 Notebook platform preparations for WiDock Operating system: – 1.7 Microsoft Windows 7* 32/64, Microsoft Windows 8.1* U 64, Microsoft Windows 10* Known limitations See Ref 4 (EPS document). § May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide Software Install Software Install 2.1 NB-side installation 1. Go to G Layout\Win7Plus\ and run Setup.exe. 2. Setup.exe installs the relevant installer for either a 32-bit platform or a 64-bit platform. Figure 2-1 End User License Agreement dialog box 3. Check the I have reviewed and agree to the EULA box, and click Install. This will install the operational WiGig software for the NB. 4. When the application is successfully installed, select the Do you want to launch Intel® Wireless Gigabit Dock Manager? check box. Click Finish. 5. You will be able to launch the Intel® Wireless Dock Manager application from the desktop shortcut later if you do not select this option. Figure 2-2 Success message Intel® Wireless Gigabit v2.6 User Guide 10 Intel Confidential May 2016 Document Number: 537178-3.9 Software Install 6. During the first installation, the device driver is installed. If the Windows Security message shown in Figure 2-3 appears, choose Install this driver software anyway to continue the installation. Figure 2-3 Windows security message To avoid this window, run the certificate file (iCert.spc) from the Certificates layout. To run the installer in silent mode, run the command setup.exe –q from a command line. 7. By the end of the installation, the user will be asked to participate in the Product Improvement Program, as shown in Figure 2-4. Figure 2-4 Product Improvement Program dialog box 8. You may change your selection at any time on the Settings menu of the Intel Wireless Dock Manager; see Figure 2-5. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 11 Software Install Figure 2-5 Changing Intel® Product Improvement Program selection § Intel® Wireless Gigabit v2.6 User Guide 12 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* WiGig Application User Manual for Windows 7*/8*/8.1* 3.1 User manual The Intel® Wireless Dock Manager is a dedicated application that runs on the client and allows the user to find, connect to, and configure docks. LEDs on the dock, and an on-screen display (OSD) on the monitor connected to the dock, provide further feedback about the dock status, and assist the user in performing actions. The activity button on the dock is used in some of the flows (like pairing and connection/disconnection). 3.1.1 Launch the Intel® Wireless Dock Manager The Intel® Wireless Dock Manager starts automatically with Windows. To invoke the Intel® Wireless Dock Manager interface, double-click the labeled Intel® Wireless Dock Manager. Alternatively, double-click the WiGig tray icon A dedicated tray icon can initiate the shown in Figure 3-1: Intel® icon on the desktop, , or right-click and choose View available docks. Wireless Dock Manager and indicate the relevant status as Connected: The NB is connected to a dock Disconnected: The NB is not connected to a dock Error: Error while connecting or weak connection (hover to see the error reason) Figure 3-1 Note: 3.1.2 Tray icon indications The Intel® Wireless Dock Manager application keeps running from the system tray even if you click the X (close window) icon on the application. Make the first connection 1. Turn on the power on your dock. When the dock is ready to accept connections, the external monitor will light up and show the welcome OSD message shown in Figure 3-2. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 13 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-2 Welcome OSD message 2. This screen remains until the connection is made. After a few minutes of inactivity, the monitor turns off to conserve power. Press the dock activity button to wake up the monitor and continue with the connection. 3. WiGig will start scanning for docks in your vicinity. You will see a window similar to that shown in Figure 3-3. Figure 3-3 Dock select 4. Choose the dock you wish to connect to by clicking it. Note: Since this is the first time you are connecting to this dock, you will need to pair with it. Pairing creates a set of authentication keys that uniquely identify your client and dock pair, and allow them to communicate in a secured, encrypted manner over-the-air. 5. Press the connection button on your dock to confirm it, as indicated in Figure 3-4. Intel® Wireless Gigabit v2.6 User Guide 14 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-4 Dock confirmation message 6. A corresponding OSD will appear on the external monitor, as shown in Figure 3-5. Figure 3-5 Dock confirmation OSD 7. Press the activity button on the dock to complete the pairing process. The Connected dialog box appears shortly after, as shown in Figure 3-6. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 15 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-6 Note: Dock connected message A successful connection is also indicated by the dock LED (if available), and the external monitor and USB devices being connected and enumerated on your client (you will hear the Windows hot-plug audio tone cues). Congratulations! You have made your first wireless docking connection. 3.1.3 Automatic connection default While connecting to the dock for the first time, you will see the message to set the dock to be automatically connected or not, as shown in Figure 3-7. Figure 3-7 Automatically Connect to this Dock message For docks you connect to regularly, select Yes. For public docks or ones you use rarely, select No. Intel® Wireless Gigabit v2.6 User Guide 16 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* 3.1.4 Automatic connections If a dock is set to connect automatically, WiGig will attempt to automatically connect to this dock once in range. To this end, WiGig keeps scanning in the background, while consuming very little power. To connect, simply place your client (assumed to be in S0) near the dock. Within several seconds, WiGig will discover the dock and will connect to it automatically. You do not have to invoke the Wireless Dock Manager, open the lid or take any action, just wait until the external screen comes up and USB devices are enumerated, and you can start working. When successfully connected to a dock, the dock LED changes color (color is specific to dock vendor). Note: For the connection to be fully completed automatically, as described above, the client needs to be powered on and active (such as in S0). If the client is in S3, WiGig will automatically discover the dock, and then you can use the dock button to wake up the client and complete the docking procedure. See Section 3.1.6 for more details. Ability to wake up the client from the dock is vendor specific and is configured in the BIOS. You can disable auto-connect by changing the toggle on the main Wireless Dock Manager screen while connected, as shown in Figure 3-8. Figure 3-8 Disabling the auto-connect setting You can only change a dock between automatic and manual connection when you are actively connected to the dock. Once auto-connect is disabled, the client will no longer connect automatically and you will have to manually select the dock from the client, as described in Section 3.1.5. 3.1.5 Manually connect to a dock To manually connect to a dock, choose the dock from the list of docks by clicking on it, as shown in Figure 3-9. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 17 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-9 Manual dock connection Docks that you have already paired with in the past will appear with a dark background color. Docks that you have never paired with will appear with a light background color. The list is being refreshed automatically, as WiGig keeps scanning in the background. Another method to connect to a dock is via the tray icon. If there is only a single paired dock in range (that is, a dock you have already paired with in the past), you can right-click the tray icon and choose Connect to. Right-clicking when there is more than one paired dock in range, or no paired docks, will give you the option to open the Wireless Dock Manager (View available docks), where you can choose your desired dock from the list. When successfully connected to a dock, the dock LED changes color (color is specific to dock vendor). 3.1.6 Automatic connection in S3 (depends on BIOS configuration) When getting in range with a paired dock that is set to auto-connect, and the client is sleeping (S3), the WiGig radio will discover the dock and establish a low power link to it, known as low-power connected. This mode may be indicated by the LED changing color. While in this mode, the system is kept in its low power state (S3), and WiGig will wait for an indication from the dock side to wake up the system and complete the connection procedure. This can be achieved by pressing the activity button on the dock. When the button is pressed, the client is moved to S0, and the connection completes automatically. Once fully connected, the dock LED may change color. 3.1.7 Automatic connection in connected standby When getting in range with a paired dock that is set to auto-connect, and the client is connected standby low-power mode, the WiGig radio will automatically connect to the dock. The devices connected to the dock will be connected and enumerated on the client, however the external monitor will not come up and the system will remain in connected standby. To take the system out of connected standby, and light up the screen, press the activity button on the dock, or alternatively click the mouse or press the keyboard. Intel® Wireless Gigabit v2.6 User Guide 18 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* 3.1.8 Disconnect from the dock There are several methods in which you can disconnect an active connection: 1. First, you can simply take your client and walk out of range from the dock. WiGig will eventually lose the link, and the dock will be disconnected. Once disconnected, WiGig automatically starts scanning again to discover auto-connect docks in range. This method is also known as auto-disconnect. In this case, the OSD will display the message pictured in Figure 3-10 after disconnecting. Figure 3-10 Note: Dock disconnection mesage Disconnecting by getting out of range (auto-disconnect) is experienced by the system as a USB surprise-removal event. While Windows has become better and better over the years with handling surprise removals, there is still always a chance of data loss/corruption when surprise-removing USB Mass Storage devices connected to the dock (other devices, such as HID, USB LAN, USB audio, etc., do not suffer). If this is a concern, for example, if you have a Mass Storage device connected to your dock, and you have just recently finished accessing this device, it may be advisable to safely remove this USB device (rightclick on the USB icon in the system tray), or to disconnect WiGig manually, as described below. In any case, it is advised to act in a similar manner to undocking from a wired dock, as the same issues are present there as well. 2. To manually disconnect, invoke the Wireless Dock Manager and click the Disconnect button in the main window. Alternatively, you can right-click the system tray icon and choose Disconnect from . May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 19 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-11 Manual disconnect option 3. Another method for manually disconnecting is to press and hold the activity button on the dock for more than four seconds. This method is especially useful for closed-lid operations, or if you are trying to manually disconnect a system where you cannot access the Wireless Dock Manager (like when the system is locked and you do not know the password). Once disconnected, the dock LED changes color (color is specific to dock vendor), and the OSD shows the Ready to Connect message, as shown in Figure 3-12. Figure 3-12 Note: Ready to connect message Manually disconnecting from a dock that is set to connect automatically will temporarily disable auto-connect to this dock. This is to prevent the connection from being recovered immediately. To re-enable automatic connections to this dock, the client needs to get out of range (for about 13 seconds) and then return. Intel® Wireless Gigabit v2.6 User Guide 20 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* 3.1.9 PIN-based pairing Intel Wireless Dock Manager version 2.6 or newer allows WiGig pairing using a PIN, without the need to push the button on the dock. To enable PIN-based pairing, select the PIN entry option from the Dock Management menu, as shown in Figure 3-13. Figure 3-13 Enabling PIN-based pairing There are dock products that have no push button option. Such docks are configured in the factory with no PBC button available. (See Ref 7). For these dock products, PIN-based pairing is the default pairing method, and the Confirmation Settings options do not appear in the Dock Management menu. Once the PIN entry is configured, the user is prompted to enter the PIN number when trying to connect to the dock, as shown in Figure 3-14. The PIN number will be shown in an OSD on the monitor connected to the dock. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 21 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-14 PIN-based pairing in OSD 3.1.10 Disable and enable WiGig 1. To disable WiGig, click on the gear icon in the upper right of the main Wireless Dock Manager screen, shown in Figure 3-14. A popup-menu will come up. Figure 3-15 Disable WiGig using the gear icon 2. Choose the first menu option, Disable WiGig. A warning may appear, depending on whether you are currently connected or not. Intel® Wireless Gigabit v2.6 User Guide 22 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-16 Disable WiGig warning message 3. Choose Yes to disable WiGig. 4. When WiGig is disabled, you cannot find and connect to wireless docks; the message shown in Figure 3-16 appears. Disabling WiGig minimizes the power consumption of the WiGig radio in the client. Figure 3-17 WiGig disabled confirmation message 5. To enable WiGig, click the Enable WiGig button. 3.2 Change dock settings 1. To access the dock settings, click the Dock Management button on the main Wireless Dock Manager window while connected to a dock, as shown in Figure 3-17. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 23 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-18 Dock Management button 2. This will open up the Dock Management dialog box, as shown in Figure 3-18. Figure 3-19 Dock management dialog box 3. In the Dock Management dialog box, you can configure the following settings: – Information Note: Name: This field determines how will the dock be called and presented in the scan list in the Wireless Dock Manager. This field accepts only Latin letters, digits, and a few special characters such as space and underscore. The factory setting for dock name is a prefix, Doc, and an automatic suffix of the last four nibbles of the MAC address of the dock. This helps users to distinguish between similar docks whose names have not been customized. Once the user changes the dock name, the last four nibbles of the MAC address are no longer appended to it. To re-enable this behavior, the dock must be reset to the factory defaults by pressing the recovery button on the dock for 10 seconds. Intel® Wireless Gigabit v2.6 User Guide 24 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* – – Dock Access Settings Individual: Allows automatic connections. This setting enables the auto-connect toggle on connected clients, as described in Section 3.1.3. This is the only setting with which the dock can be automatically connected to, and is particularly suitable for private docks for individuals. Shared: Requires manual confirmation. This setting forces manual connections by disabling the auto-connect toggle on connected clients. This setting is particularly suitable for shared docks in multi-users environments, where it may be undesirable to allow automatic connection to prevent users from inadvertently connecting to the dock while in range (remember that a dock that is currently connected to a user cannot accept other user’s connections, and will not be seen in their scan list). Public: Requires pairing for all connections. This settings forces the user to pair on every connection (such as. pairing data is lost upon disconnect). This is the most secure setting, and is mostly suitable for docks where the convenience of connection is less of a concern, for example in airports, cafes or hotels. Signal Preferences – Preferred Radio Channel: Allows you to assign a specific operating channel, or enable automatic selection by the dock. It is recommended to leave this as Auto, as this will allow the dock to select the best channel to operate in, based on interference and other factors. Password 3.3 Software: This shows the version of the currently installed software. Clicking this item will allow you to manually update your dock software, as described in Section 3.3.1. Also, when an update is available for your dock, it will show up next to the version number. Click the Update Available link to start the software update procedure. Enable this to assign a password for protecting the dock setting page, preventing unauthorized access. Dock software update Your dock software can be upgraded over the air, from the client. 3.3.1 Update during connection 1. When connecting to the dock, the Wireless Dock Manager might inform the user of a mandatory dock software update. 2. On mandatory dock software updates, the Wireless Dock Manager will present the message shown in Figure 3-19 while trying to connect. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 25 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-20 Dock software Update Required message 3. In addition, the OSD on the external monitor will show the message shown in Figure 3-20. Figure 3-21 OSD Update Required message 4. Choosing No will disconnect. The user cannot connect and work with this dock without performing a software update. 5. Choosing Yes will start the dock software update process. A screen similar to the one in Figure 3-21 appears, with a bar indicating progress. Intel® Wireless Gigabit v2.6 User Guide 26 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-22 Dock update progress 6. During the software update process, the dock LED changes color (color is specific to dock vendor), and the OSD will show the message pictured in Figure 3-22, with bars to indicate progress. Figure 3-23 OSD update progress message 7. Once the update process is complete, the dock is reset, and the client will either automatically reconnect (auto-connect enabled) or the user will need to manually re-connect to the dock (autoconnect disabled). 3.4 Diagnostic information Information shown in diagnostics window will help technical support in troubleshooting your wireless docking experience. In order to open the diagnostics window, click the Advanced Diagnostics button in the About window. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 27 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-24 Advanced diagnostics window 3.4.1 Details This PC tab The information in the This PC tab provides a diagnostic report for the client. The reported fields are: Release: Version of WiGig release, including all SW components in host and device F/W: Version of firmware running in device User mode driver: Version of software running in user-mode driver WSE HPAL driver: Version of software running in WSE-HPAL driver WSE hub driver: Version of software running in WSE-hub driver SDK-API: Version of SDK-API Operational SDK Wrapper: Version of Operational SDK DLL Common SDK Wrapper: Version of Common SDK DLL OTP Content: Version of image burned in OTP CU: Version of CU Application MAC H/W: Version of M-Chip Si. Possible values are: – 6560-6567: For MpL-C4 – 6568-6575: For MpL-C5 R-FEM H/W: Version of R-Chip. Possible values are: – 4-5: in case of R-FEM1 – 6: in case of R-FEM2 Device ID: 0x93C, meaning MpL Si Subsystem ID: Value representing WiGig HW SKU. Details are given in Ref 4. OEM ID: String configured in OEM-Lock field in BIOS. See more details in Section 8.1.2 in Ref 6. Device State: See details for Device status field in Section 5.2.1.1.1 in Ref 5. Intel® Wireless Gigabit v2.6 User Guide 28 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* Device State Reason: See details for Reason for Status field in Section 5.2.1.1.1 in Ref 5. Last Disconnect Reason: See details for Failed Connection Details field in Section 5.4.11 in Ref 5. H/W status 1: M-chip junction temperature, in Celsius. H/W status 2: R-chip junction temperature, in Celsius. Dock Tab The information in the This PC tab provides a diagnostic report for the dock. The reported fields are F/W (main): Version of firmware burned in main slot in Flash F/W (factory): Version of firmware burned in factory slot in Flash Active F/W: See details for Active FW field in Section 5.7.20 in Ref 5. OTP Content: Version of image burned in OTP MAC H/W: Version of M-Chip Si. Possible values are – 6560-6567: For MpL-C4 – 6568-6575: For MpL-C5 R-FEM1 H/W: Version of R-Chip. Possible values are – 4-5: In case of R-FEM1 – 6: In case of R-FEM2 R-FEM2 H/W: Version of R-Chip. Possible values are the same as for R-FEM1. MST Hub H/W: Version of MST Hub hardware MST Hub F/W: Version of MST Hub firmware Signal Quality: See details for the Peer-Signal-Quality field in Section 5.4.8 in Ref 5. Performance Quality: See details for the Peer-Performance-Quality field in Section 5.4.8 in Ref 5. Active Channel: See details for the Active Channel field in section 5.4.8 in Ref 5. Last F/W update result: See details for the Status field in Section 5.2.1.6 in Ref 5. H/W status 1: M-chip junction temperature, in Celsius H/W status 2: R-chip junction temperature, in Celsius 3.5 Manage docks The user may manage docks that were previously connected to. For each dock, the user may delete the dock or remove the auto-connect option. To manage docks, click on the Manage Remembered Dock dialog box from the Settings button, as shown in Figure 3-24 and Figure 3-25. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 29 WiGig Application User Manual for Windows 7*/8*/8.1* Figure 3-25 Choosing Manage Remembered Docks Figure 3-26 Manage Remembered Docks auto-connect feature Intel® Wireless Gigabit v2.6 User Guide 30 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* 3.6 Notification messages There are notification messages that inform the user about the different application activities, like possible limitations or errors. 3.6.1 Unable to Connect The “Unable to Connect” message is displayed if there is an error during the connection or pairing process, as shown in Figure 3-26. Figure 3-27 Unable to Connect message 3.6.2 No Available Docks Found As shown in Figure 3-27, the “No Available Docks Found” message is displayed if scanning was done but no docks have been detected. Figure 3-28 No Available Docks Found message May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 31 WiGig Application User Manual for Windows 7*/8*/8.1* 3.6.3 Weak Connection The “Weak Connection” message is displayed if the connection is weak but connected, as shown in Figure 3-28. Figure 3-29 Weak Connection message 3.6.4 WiGig is Not Working The “WiGig is Not Working” message will be displayed if WiGig driver or device is not responding, as shown in Figure 3-29. The message will also provide an error code value. Table 3–1 provides a list of error code cases and possible recovery methods. Figure 3-30 WiGig is Not Working message (with example error code 0x1000) Intel® Wireless Gigabit v2.6 User Guide 32 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* Table 3–1 Error code cases and possible recovery methods Item Error Code Description Recovery Method 0x1000 Device is disabled In Device Manager, • If WiGig device is disabled, enable this device. • If WiGig device is enabled, disable this device and then enable. 0x100C Device Version (OTP) is incompatible with SW Version. Replace Device with compatible Device Version (OTP) or Install compatible SW Version 0x1010 FW continuous error In Device Manager, disable this device and then enable. In case this does not solve the problem, you may need to install other SW Version, containing a fix. Please contact Intel support. 0x1014 RTC Data corruption Replace Coax Cable and/or RFEM 0x1018 RFEM Type is incompatible with SW Version Replace RFEM with compatible RFEM Type or Install compatible SW Version 0x101C Device SKU is Incompatible with SW Version. Replace Device SKU or Install compatible SW Version 0x1021 Device Product is Incompatible with SW Version. Replace Device with compatible Device Product or Install compatible SW Version 0x1020 RTC disconnected, upon RF-On Replace/Reconnect Coax Cable and/or RFEM 0x1100 Unrecognized fatal error In Device Manager, disable this device and then enable. In case this does not solve the problem, you may need to install another SW version, containing a fix. Please contact Intel support. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 33 WiGig Application User Manual for Windows 7*/8*/8.1* 3.6.5 WiGig disabled: critical temperature The “WiGig is disabled due to overheating” message is displayed if the WiGig driver or device is disabled due to a critical temperature error, as shown in Figure 3-30. Figure 3-31 WiGig disabled due to overheating message 3.6.6 WiGig disabled by hardware RF kill switch The “WiGig is disabled” message is displayed if the WiGig driver or device is disabled by the physical radio on/off switch, as shown in Figure 3-31. Figure 3-32 WiGig disabled by hardware RF kill switch message Intel® Wireless Gigabit v2.6 User Guide 34 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 7*/8*/8.1* 3.6.7 WiGig disabled by airplane mode The “WiGig is disabled” message is displayed if the WiGig driver or device is disabled because the device is in airplane mode, as shown in Figure 3-32. Figure 3-33 WiGig disabled by airplane mode message § May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 35 WiGig Application User Manual for Windows 10* WiGig Application User Manual for Windows 10* 4.1 User manual This chapter is very similar to the previous chapter and contains the WiGig behavior in the Windows 10* OS. In Windows 10*, the OS controls the network-related functionality. This includes handling the radio state, scanning, connecting, and managing the profiles. The OS controls this via the setting and the action center pane, as described below. The Intel® Wireless Dock Manager is a dedicated application that runs on the client and allows the user to do all the activities that are not related to network management, like manage the dock, get diagnostic info, do FWU, etc. LEDs on the dock, and an on-screen display (OSD) on the monitor connected to the dock, provide further feedback about the dock status, and assist the user in performing actions. The activity button on the dock is used in some of the flows (like pairing and connecting/disconnecting). 4.1.1 Launch the Intel® Wireless Dock Manager The Intel® Wireless Dock Manager starts automatically with Windows. To invoke the Intel® Wireless Dock Manager interface, double-click the labeled “Intel® Wireless Dock Manager”. Alternatively, double-click the WiGig tray icon connected icon as shown in Figure 3-1.) icon on the desktop, while the device is connected to a dock (the The Intel® Wireless Dock Manager application keeps running as an application even if you click the X (close window) icon on the application. To stop it, you must use the Windows Task Manager. 4.1.2 Make the first connection 1. Turn on the power to your dock. When the dock is ready to accept connections, the external monitor lights up and shows the Welcome OSD message, as shown in Figure 4-1. Intel® Wireless Gigabit v2.6 User Guide 36 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* Figure 4-1 Welcome OSD message 2. This message persists until the connection is made. After a few minutes of inactivity, the monitor turns off to conserve power. Press the dock’s Activity button to wake up the monitor and continue with the connection. 3. Click the Wireless Settings link to access the Airplane mode section of the Network & Internet page (Figure 4-2) containing controls that let you turn on (or off) the WiGig RF mode in addition to the RF state of other devices. WiGig will be ON by default. Figure 4-2 Network & Internet page showing Airplane mode settings 4. An alternative way to get to this page is via Settings -> Network & Internet -> Airplane mode. 5. Once you set the WiGig radio button to on, you will find all docks in range. In Windows 10*, you won’t be able to see the scan results in the Connect pane or in the Intel® Wireless Dock Manager. 6. To get to the Connect pane, click on the Action Center link (Figure 4-3) or press the keyboard shortcut Win+k; the Connect pane opens on the right side of the monitor (Figure 4-4). May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 37 WiGig Application User Manual for Windows 10* Figure 4-3 Action Center link Figure 4-4 Connect pane 7. Choose the dock you wish to connect to by clicking it in the Connect pane. Intel® Wireless Gigabit v2.6 User Guide 38 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* Note: Since this is the first time connecting to the dock, you need to pair with it. Pairing creates a set of authentication keys that uniquely identify your client and dock pair, and allows them to communicate in a secured, encrypted manner over the air. 8. After connecting, the Connect pane directs you to follow the instructions on the dock, as shown in Figure 4-5. Figure 4-5 Connect pane during connecting stage 9. A corresponding OSD will appear on the external monitor, as shown in Figure 4-6. 10. Unlike in Win7/8/8.1, you won’t see the indication to push the dock button on Intel® Wireless Dock Manager. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 39 WiGig Application User Manual for Windows 10* Figure 4-6 Connect OSD message 11. Press the activity button on the dock to complete the pairing process. The “Successfully Connected” message appears shortly after, as shown in Figure 4-7. Figure 4-7 Note: Dock connected message A successful connection is indicated by the dock LED (if available), and the external monitor and USB devices being connected and enumerated on your client (you will hear the Window’s gling-gling hot-plug audio cues). In addition you are also able to see that you are connected via the Connect pane by clicking the Action Center link, or by pressing the keyboard shortcut Win+K, as shown in Figure 4-8. Intel® Wireless Gigabit v2.6 User Guide 40 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* Figure 4-8 Dock connected OSD message Congratulations! You have made your first wireless docking connection. 4.1.3 Automatic connection default This section is not applicable to Win10* as in Win7*/8*/8.1*. In Windows 10*, the dock is in automatically connect mode. 4.1.4 Automatic connections If a dock is set to connect automatically, WiGig attempts to automatically connect to the dock once in range. To this end, WiGig keeps scanning in the background, while consuming very little power. To connect, simply place your client (assumed to be in S0) near the dock. Within several seconds, WiGig will discover the dock and connect to it automatically. You do not have to invoke the Wireless Dock Manager, open the lid or take any action; just wait until the external screen comes up and USB devices are enumerated, and you can start working. When successfully connected to a dock, the dock LED changes color (specific to the dock vendor). Note: For the connection to be fully completed automatically, as described above, the client needs to be powered on and active (such as in S0). If the client is in S3, WiGig will automatically discover the dock, and then you can use the dock button to wake up the client and complete the docking procedure. See Section 3.1.6 for more details. Ability to wake up the client from the dock is vendor specific and is configured in the BIOS. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 41 WiGig Application User Manual for Windows 10* You can disable auto connect by deselecting the Connect automatically check box while connected, as shown in Figure 4-9. Figure 4-9 Disable the auto connect setting You can change a dock between automatic and manual connection only when you are actively connected to the dock. Once auto-connect is disabled, the client no longer connects automatically, and you have to manually select the dock from the client as described in Section 3.1.5. 4.1.5 Manually connect to a dock When the dock is defined as manual, the connection is done similarly to the connection flow that was describe above, without the stage where the user is requested to push the button. 4.1.6 Automatic connection in S3 (depends on BIOS configuration) Same as in Section 3.1.6. 4.1.7 Automatic connection in connected standby Same as in Section 3.1.7. Intel® Wireless Gigabit v2.6 User Guide 42 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* 4.1.8 Disconnect from the dock Same as in Section 3.1.8. The only differentiation is that to manually disconnect, the user cannot disconnect from the Intel® Wireless Dock Manager, but instead has to do it from the Connect pane. 4.1.9 PIN-based pairing Same as in Section 3.1.9 4.1.10 Disable and enable WiGig 1. In Win10, the ability to disable WiGig is available only from the Windows Airplane mode settings page (Settings-> Network & Internet -> Airplane mode). 2. When WiGig is disabled, you cannot find and connect to wireless docks; the screen shown in Figure 4-10 comes up in case the Intel® Wireless Dock Manager is open. Disabling minimizes the power consumption of the WiGig radio in the client. Figure 4-10 WiGig disabled confirmation message 3. To enable WiGig, go to the Airplane mode settings page by clicking the Wireless Settings link or by clicking Settings -> Network & Internet -> Airplane mode and turning on WiGig. 4.2 Change dock settings Same as in Section 3.2. 4.3 Dock software update Your dock software can be upgraded over the air, from the client. 1. When connecting to the dock, the Wireless Dock Manager might inform the user of mandatory dock software update. 2. For mandatory dock software updates, you will get a toast notifying you that the dock update is required, as shown in Figure 4-11. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 43 WiGig Application User Manual for Windows 10* Figure 4-11 Dock update required toast 3. Clicking on this toast will pop up the Intel® Wireless Dock Manager application. 4. From this point forward, the process of updating the dock is similar to the process described in Section 3.3. 4.4 Diagnostic information Same as in Section 3.4. 4.5 Manage docks User may delete connected docks that are no longer needed. 1. To delete docks, go to Connected devices (Settings ->Devices -> Connected devices), click on the dock you want to remove, and then click the Remove device button, as shown in Figure 4-12. Then, you can approve it as shown in Figure 4-13. Figure 4-12 Remove device button Intel® Wireless Gigabit v2.6 User Guide 44 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* Figure 4-13 Remove device approval dialog box 4.6 Notification messages This section lists the messages that show possible device limitations or errors. 4.6.1 Not found When no device can be found, the Connect pane appears with a request to verify that the RF is on, as shown in Figure 4-14. Figure 4-14 Device not found message May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 45 WiGig Application User Manual for Windows 10* 4.6.2 Try connecting your device again When there is a problem in the pairing flow (before the user has the dock profile) the Connect pane returns the error “Try connecting your device again”, as shown in Figure 4-15. Figure 4-15 Try connecting your device again message Intel® Wireless Gigabit v2.6 User Guide 46 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* 4.6.3 Couldn’t connect When there is a problem in the connecting flow (after the user has the dock profile), the Connect pane returns the error “Couldn’t connect”, as shown in Figure 4-16. Figure 4-16 Couldn’t connect message 4.6.4 Weak connection The weak connection message displays if the connection is weak, as shown in Figure 4-17. If the Intel® Wireless Dock Manager application is open, it also notifies the user about this state, as shown in Figure 4-18. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 47 WiGig Application User Manual for Windows 10* Figure 4-17 Weak connection toast Figure 4-18 Weak connection message in Dock Manager 4.6.5 WiGig disabled: critical temperature When the WiGig is disabled due to overheating, the message shown in Figure 4-19 will popup. Also, when the Intel® Wireless Dock Manager application is open it will notify the user about this state, as shown in Figure 4-20. Figure 4-19 WiGig disabled due to overheating toast Intel® Wireless Gigabit v2.6 User Guide 48 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig Application User Manual for Windows 10* Figure 4-20 WiGig disabled due to overheating message in Dock Manager 4.6.6 WiGig is Not Working Same as in Section 3.6.4. § May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 49 The Wireless Dock and Multiple Displays The Wireless Dock and Multiple Displays 5.1 Intel® WiGig A/V wireless capabilities Intel® WiGig is seen by the Intel® Display Driver as a DP V1.2 Branch device. It advertises its capabilities to the driver using standard DisplayPort V1.2a tools. The capabilities include A/V bandwidth, as well as other capabilities related to the internal A/V subsystem. Intel® WiGig HW can support up to two A/V streams. This limitation is advertised to the Intel DisplayPort Driver, which then limits the number of active streams sent over the Intel® WiGig DP interface. When the user connects three displays to the MST hub at the output of the Intel® WiGig-based dock, only two out of the three displays connected can be active at the same time. 5.1.1 Intel® WiGig DisplayPort Bandwidth and other limitations The DisplayPort V1.2a standard defines mechanisms that allow branch devices to advertise their capabilities and limitations to the Display Driver. There are two main limitations which may affect the user experience: 1. DisplayPort Bandwidth (AKA PBN): Intel® WiGig DP interface operates at 4 × 2.7 gbps speed. This results in an ability to support single display resolutions of up to 2560×1600@60 Hz or Dual Display Resolutions of 1920×1200@60 Hz. For example, if the user connects 2 1600p60 capable displays to the dock, it cannot drive the native resolution to both displays due to the DP BW limitation. The Display Driver will remove some of the video modes from one of the displays while allowing native resolution to the 2nd display. 2. Wireless Branch Device Limitations (AKA CCS): Intel® WiGig DP interface advertises Wireless Branch Device limitations related to the capabilities of the integrated video Encoders and Decoders. Currently the advertised limitations are as follows: a. Frame Width <= 2560 b. Frame Height <= 1600 c. Max Frame Rate = 60 Hz d. Min Frame Rate = 59 Hz e. Max Pixel Clock = 268 MHz f. RGB: Only color space modes supported g. Progressive only modes supported All display modes not meeting the criteria above will be removed by the display driver and not shown by the Resolution Manager. 5.2 User experience when connecting more than two displays to the wireless dock The driver initially selects two default displays. These will be the displays connected to the output ports #1 and #2 of the MST hub device. The display connected to port #3 will not be used and will not appear in the Windows Screen Resolution control panel. Intel® Wireless Gigabit v2.6 User Guide 50 Intel Confidential May 2016 Document Number: 537178-3.9 The Wireless Dock and Multiple Displays The Intel® Display Driver generates a pop-up window, stating “DisplayPort Topology Notification. A new DisplayPort Topology has been identified”. Click the window to open the Intel® HD Graphics control panel’s DisplayPort Topology Viewer (see Figure 5-1). The user is requested to select the two displays to be activated for the Intel® WiGig selected port. Selected displays are marked in light blue. Figure 5-1 DisplayPort topology viewer Once the user selects the active displays, the display driver will re-initiate the A/V link setup process and activate the selected displays. Only the selected displays will be seen in the Windows Screen Resolution control panel. The unselected display will not be shown (see Figure 5-2). The user can select the operating mode (duplicate/extend), and activate and deactivate the screens using the Screen Resolution control panel. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 51 The Wireless Dock and Multiple Displays Figure 5-2 Windows Screen Resolution control panel The same behavior occurs when the user uses the Intel® Graphics Control Panel’s Display tab (see Figure 5-3). In this window, only the two displays selected in the Topology Manager will be seen. Figure 5-3 Graphics control panel § Intel® Wireless Gigabit v2.6 User Guide 52 Intel Confidential May 2016 Document Number: 537178-3.9 WiGig events in Windows Event Viewer WiGig events in Windows Event Viewer WiGig SW provides logging information to Windows Event Viewer, both for local client machine and for the connected WiGig dock. This information appears in Windows Event Viewer under Applications and Services Logs -> Intel® WiGig. 6.1 WiGig Event Properties The events are distinguished by the following list of properties: • Log Name: Intel® WiGiG • Level: can be • Information – Events with this level provides informative data of WiGig flow. Error - Event with this level provides data for erroneous WiGig flow. Source: can be iWiGig-Local – Events logged from local Client side iWiGig-Remote – Events logged from remote Docking side, that is, WiGig connected to the Client • Event ID: Will be always 256 • Task Category: The index for this parameter may belong to the groups listed in Table 6–1. Table 6–1 List of groups for Task Category parameter in WiGig Events Task Category index range Group type 0-199 General Infra & Platform Events 200-299 Dock FW-Update Events 300-399 MAUSB Events 600-699 WDE Events 6.2 WiGig Event Data The data per each event provides the following information: • Release: WiGig SW release version • Self MAC Address: WiGig MAC Address value of Client side • Peer MAC Address: WiGig MAC Address of connected peer docking station • The next information presented is low-level debug data, per each event. 6.3 Accessing WiGig Events Log The steps to access the WiGig Events log are 1. Open the Windows Event Viewer. May 2016 Document Number: 537178-3.9 Intel Confidential Intel® Wireless Gigabit v2.6 User Guide 53 WiGig events in Windows Event Viewer 2. On the left-hand pane, Go to Applications and Services Logs->Intel® WiGig. The middle pane displays the list of WiGig events. 3. The user can click on each event and see its specific details on the bottom pane. 4. By right-clicking on Applications and Services Logs->Intel® WiGig (on the left-hand pane), user may save the WiGig Events log or perform other operations as allowed by the Event Viewer. Intel® Wireless Gigabit v2.6 User Guide 54 Intel Confidential May 2016 Document Number: 537178-3.9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Intel Corporation CTP BU : INFORMATION TECHNOLOGY GRP Create Date : 2016:05:17 14:15:31-07:00 Document Name : Intel XXX Document Number : 537178 Keywords : Intel®, Wireless, Gigabit, v2.6, User, Guide Modify Date : 2016:11:07 17:56:51-05:00 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Metadata Date : 2016:11:07 17:56:51-05:00 Creator Tool : Acrobat PDFMaker 15 for Word Document ID : uuid:3e7967e3-eb2f-4062-8f4d-051a3af3a122 Instance ID : uuid:1b66dcee-886f-4dd5-9eed-3ab0c3717e55 Format : application/pdf Title : Intel® Wireless Gigabit v2.6 Description : User Guide Creator : Intel Corporation Subject : Intel® Wireless Gigabit v2.6 User Guide Producer : Adobe PDF Library 15.0 Source Modified : D:20160517211459 Company : Intel Corporation Comments : Version : 3.9 Document 0020 Name : Intel XXX CC Version : \main\36 Document 0020number : 537178 Content Type Id : 0x010100FDAEA89783E7E649B237BE5BCCB313BB Titus GUID : bed74cc9-7ff2-4ebb-acbc-f1ab324a5de3 Ctp Bu : INFORMATION TECHNOLOGY GRP CTP Time Stamp : 2016:05:17 21:14:49Z CTP Classification : CTP_IC Headline : User Guide Page Layout : OneColumn Page Count : 54EXIF Metadata provided by EXIF.tools