Intel 622ANXH Intel Centrino Wireless-N+WiMax 6250 User Manual revised manual iaw FCC RT

Intel Mobile Communications Intel Centrino Wireless-N+WiMax 6250 revised manual iaw FCC RT

Contents

revised manual iaw FCC RT

I nt el® W ir eless Adapt er I nform at ion Guide
This version of I ntel® PROSet / Wireless WiFi Soft ware is com pat ible wit h t he adapt ers list ed next . However, not e
that newer feat ures provided in t his software release are generally not support ed for older, legacy adapt ers.
I nt el® Centrino® Wireless- N 100
I nt el® Centrino® Wireless- N 105
I nt el® Centrino® Wireless- N 130
I nt el® Centrino® Wireless- N 135
I nt el® WiFi Link 1000
I nt el® Centrino® Wireless- N 1030
I nt el® Centrino® Wireless- N 2200
I nt el® Centrino® Wireless- N 2230
I nt el® Centrino® Wireless- N + WiMAX 6150
I nt el® Centrino® Advanced - N 6200
I nt el® Centrino® Advanced - N 6205
I nt el® Centrino® Advanced - N 6230
I nt el® Centrino® Advanced - N 6235
I nt el® Centrino® Advanced - N + WiMAX 6250
I nt el® Centrino® Ultim ate-N 6300
Wit h your WiFi net work card, you can access WiFi networks, share files or print ers, or even share your I nt ernet
connect ion. All of these feat ures can be explored using a WiFi network in your hom e or office. This WiFi net work
solut ion is designed for bot h hom e and business use. Additional users and feat ures can be added as your
net working needs grow and change.
This guide contains basic inform at ion about I nt el adapt ers. I t includes inform at ion about several adapt er properties
that you can set t o cont rol and enhance the perform ance of your adapter wit h your particular wireless net work
and environm ent. I nt el® wireless adapt ers enable fast connectivit y wit hout wires for deskt op and not ebook PCs.
Adapt er Settings
Regulat ory I nform at ion
Specificat ions
I m portant I nform at ion
Support
Warrant y
Glossary
Depending on t he m odel of your I nt el WiFi adapter, your adapter is com patible wit h 802.11a, 802.11b, 802.11g,
and 802.11n ( draft 2.0) wireless st andards. Operat ing at 5 GHz or 2.4 GHz frequency at dat a rat es of up t o 450
Mbps, you can now connect your com puter t o existing high - speed net works t hat use m ult iple access points wit hin
large or sm all environm ent s. Your WiFi adapter m aint ains aut om at ic data rate control according to the access point
locat ion and signal st rengt h t o achieve the fast est possible connection. All of your wireless net work connect ions
are easily m anaged by the WiFi connect ion utilit y. Profiles t hat are set up through t he WiFi connect ion ut ility
provide enhanced securit y m easures wit h 802.1X net work authenticat ion.
I n form a t ion in t his docu m e nt is subj e ct t o chan ge w it hout not ice.
© 2 0 0 4 2 0 1 2 I nt el Cor por at ion. All r igh t s reserved. I n t el Corpor a t ion, 5 2 0 0 N .E. Elam Young Parkw ay,
Hillsbor o, OR 9 7 1 2 4 - 6 4 9 7 USA
The copying or reproducing of any m at erial in t his docum ent in any m anner what soever wit hout the written
perm ission of I ntel Corporat ion is st rict ly forbidden. I nt el® is a t radem ark or regist ered t radem ark of I nt el
Corporat ion or it s subsidiaries in the Unit ed St at es and ot her countries. Ot her t radem arks and trade nam es m ay
be used in this docum ent t o refer to eit her t he ent it ies claim ing the m arks and nam es or t heir product s. I nt el
disclaim s any proprietary int erest in t radem arks and t rade nam es ot her than it s own. Microsoft and Windows are
regist ered t radem arks of Microsoft Corporation. Windows Vist a is eit her a regist ered t radem ark or t radem ark of
Microsoft Corporat ion in t he United Stat es and/ or ot her count ries.
* Other nam es and brands m ay be claim ed as t he property of others.
I nt el Corporation assum es no responsibility for errors or om issions in this docum ent. Nor does I nt el m ake any
com m it m ent to updat e the inform at ion contained herein.
"I MPORTANT NOTI CE FOR ALL USERS OR DI STRI BUTORS:
I nt el wireless LAN adapters are engineered, m anufactured, t est ed, and qualit y checked t o ensure that t hey m eet
all necessary local and governm ent al regulat ory agency requirem ent s for t he regions t hat they are designat ed
and/ or m arked t o ship into. Because wireless LANs are generally unlicensed devices that share spect rum wit h
radars, satellit es, and ot her licensed and unlicensed devices, it is som et im es necessary t o dynam ically det ect ,
avoid, and lim it usage t o avoid interference wit h these devices. I n m any instances I ntel is required t o provide t est
data to prove regional and local com pliance to regional and governm ental regulat ions before cert ificat ion or
approval t o use the product is grant ed. I nt el's wireless LAN's EEPROM, firm ware, and soft ware driver are designed
to carefully cont rol param eters t hat affect radio operat ion and t o ensure elect rom agnet ic com pliance ( EMC). These
param eters include, wit hout lim it at ion, RF power, spectrum usage, channel scanning, and hum an exposure.
For t hese reasons I nt el cannot perm it any m anipulat ion by third parties of t he software provided in binary form at
wit h the wireless LAN adapters ( e.g., t he EEPROM and firm ware) . Furtherm ore, if you use any pat ches, ut ilit ies, or
code with t he I ntel wireless LAN adapters that have been m anipulated by an unaut horized part y (i.e., patches,
ut ilit ies, or code ( including open source code m odificat ions) which have not been validat ed by I nt el) , ( i) you will be
solely responsible for ensuring the regulat ory com pliance of t he product s, ( ii) I nt el will bear no liabilit y, under any
theory of liabilit y for any issues associated wit h t he m odified product s, including wit hout lim it ation, claim s under
the warrant y and/ or issues arising from regulat ory non -com pliance, and ( iii) I nt el will not provide or be required t o
assist in providing support to any third parties for such m odified product s.
N ot e : Many regulatory agencies consider Wireless LAN adapters to be "m odules", and accordingly, condit ion
syst em - level regulat ory approval upon receipt and review of test dat a docum enting t hat t he antennas and syst em
configurat ion do not cause t he EMC and radio operat ion to be non - com pliant ."
January 31, 2012
Back t o Content s
Adapter Set t ings
The Advan ced tab displays the device properties for t he WiFi adapt er inst alled on your com puter.
How t o Acce ss
At the I nt el® PROSet / Wireless WiFi Connect ion Ut ilit y, Advanced Menu click Ada pt er Sett ings. Select t he
Adva nced tab.
W iFi Ada pt er Set t ings D escript ion
N a m e D escr ip t ion
802.11n
Cha nne l W idt h
( 2 .4 GH z)
Set high throughput channel width t o m axim ize perform ance. Set t he channel width t o Au t o or
2 0 MHz . Use 20MHz if 802.11n channels are restrict ed. This set t ing applies to 802.11n capable
adapt ers only.
N OTE: This set t ing does not apply t o t he I ntel® Wireless WiFi Link 4965AGN ( uses 20 MHz
channel width only) .
802.11n
Cha nne l W idt h
( 5 .2 GH z)
Set high throughput channel width t o m axim ize perform ance. Set t he channel width t o Au t o or
2 0 MHz . Use 20MHz if 802.11n channels are restrict ed. This set t ing applies to 802.11n capable
adapt ers only.
N OTE: This set t ing does not apply t o t he following adapters:
I nt el® WiFi Link 1000
I nt el® Wireless WiFi Link 4965AGN
8 0 2 .1 1 n M ode The 802.11n st andard builds on previous 802.11 st andards by adding m ult iple- input m ult iple-
out put ( MI MO) . MI MO increases data throughput t o im prove t ransfer rat e. Select En able d or
Disa ble d t o set the 802.11n m ode of t he WiFi adapt er. Enabled is the default setting. This
set ting applies t o 802.11n capable adapt ers only.
N OTE: To achieve transfer rat es great er than 54 Mbps on 802.11n connections, WPA2* -AES
securit y m ust be selected. No securit y ( N on e ) can be select ed t o enable net work set up and
troubleshoot ing.
An adm inist rat or can enable or disable support for high throughput m ode t o reduce power-
consum ption or conflict s wit h other bands or com pat ibilit y issues.
Ad Hoc
Cha nne l
Unless the ot her com puters in t he ad hoc network use a different channel from t he default
channel, t here is no need t o change t he channel.
Va lu e: Select the perm itted operat ing channel from t he list .
802.11b/ g: Select t his option when 802.11b and 802.11g ( 2.4 GHz) ad hoc band
frequency is used.
802.11a: Select t his option when 802.11a ( 5 GHz) ad hoc band frequency is used. This
set ting does not apply t o t he I ntel® WiFi Link 1000 adapt er.
N OTE: When an 802.11a channel is not displayed, initiat ing ad hoc net works is not supported
for 802.11a channels.
Ad Hoc Pow er
Mana ge m ent
Set power saving feat ures for device t o device ( ad hoc) networks.
D isa ble : Select when connect ing t o ad hoc net works t hat contain st at ions t hat do not
support ad hoc power m anagem ent
Maxim um Pow er Savings: Select t o opt im ize bat t ery life.
N oisy En vironm ent : Select t o opt im ize perform ance or connect ing wit h m ult iple client s.
Ad Hoc QoS
Mode
Qualit y of Service (QoS) cont rol in ad hoc net works. QoS provides priorit ization of traffic from
the access point over a wireless LAN based on t raffic classificat ion. WMM ( Wi- Fi Mult im edia) is
the QoS cert ificat ion of the Wi- Fi Alliance ( WFA) . When WMM is enabled, t he WiFi adapter uses
WMM t o support priorit y t agging and queuing capabilit ies for Wi-Fi networks.
W M M Enable d ( Default )
W M M Disa ble d
Fa t Channel
I n t ole r an t
This setting com m unicat es t o surrounding net works t hat t his WiFi adapt er is not t olerant of
40MHz channels in t he 2.4GHz band. The default setting is for t his t o be t urned off ( disabled) ,
so t hat t he adapter does not send t his not ificat ion.
N OTE: This set t ing does not apply t o t he following adapters:
I nt el® Wireless WiFi Link 4965AG_
I nt el® PRO/ Wireless 3945ABG Net work Connect ion
Mix ed m ode
pr ot e ct ion
Use t o avoid dat a collisions in a m ixed 802.11b and 802.11g environm ent. Request t o
Send/ Clear t o Send ( RTS/ CTS) should be used in an environm ent where clients m ay not hear
each ot her. CTS- t o -self can be used t o gain m ore t hroughput in an environm ent where client s
are in close proxim it y and can hear each ot her.
Pow er
Mana ge m ent
Let s you select a balance bet ween power consum ption and WiFi adapter perform ance. The WiFi
adapt er power set t ings slider set s a balance bet ween the com put er's power source and the
battery.
Use default value : ( Default) Power set tings are based on the com puter's power source.
Manual: Adj ust t he slider for t he desired set t ing. Use the lowest set t ing for m axim um
battery life. Use t he highest set t ing for m axim um perform ance.
N OTE: Power consum ption savings vary based on Net work ( I nfrast ruct ure) settings.
Roam ing
Aggr essive ne ss
This setting lets you define how aggressively your wireless client roam s to im prove connection
to an access point .
Defa u lt : Balanced set t ing bet ween not roam ing and perform ance.
Low e st : Your wireless client will not roam . Only significant link quality degradat ion
causes it t o roam t o anot her access point .
H ig he st : Your wireless client continuously t racks the link quality. I f any degradat ion
occurs, it t ries t o find and roam t o a better access point.
Throughput
Enha ncem en t
Changes the value of t he Packet Burst Cont rol.
Enable: Select to enable throughput enhancem ent .
D isa ble : ( Default ) Select t o disable throughput enhancem ent.
Tr ansm it
Pow er
Defa u lt Se t t in g : Highest power setting.
Low est : Minim um Cover age : Set t he adapter to the lowest t ransm it power. Enables you t o
expand the num ber of coverage areas or confine a coverage area. Reduces the coverage area
in high t raffic areas t o im prove overall t ransm ission qualit y and avoids congest ion and
int erference wit h other devices.
Highest : M a x im um Coverage : Set t he adapter to a m axim um t ransm it power level. Select
for m axim um perform ance and range in environm ent s wit h lim it ed addit ional WiFi radio
devices.
N OTE: The opt im al setting is for a user to always set the transm it power at the lowest
possible level t hat is st ill com pat ible wit h the qualit y of t heir com m unicat ion. This allows t he
m axim um num ber of wireless devices t o operat e in dense areas and reduce int erference wit h
ot her devices t hat it shares t he sam e radio spect rum wit h.
N OTE: This set t ing t akes effect when either Net work ( I nfrast ruct ure) or Device t o Device (ad
hoc) m ode is used.
W ireless Mode Select which m ode t o use for connect ion to a wireless network:
8 0 2 .1 1 a on ly : Connect t he wireless WiFi adapter to 802.11a net works only. Not
applicable for all adapters.
8 0 2 .1 1 b only : Connect the wireless WiFi adapt er t o 802.11b net works only. Not
applicable for all adapters.
8 0 2 .1 1 g only : Connect the wireless WiFi adapt er t o 802.11g net works only.
802.11a and 802.11g: Connect the WiFi adapter to 802.11a and 802.11g networks
only. Not applicable for all adapt ers.
802.11b and 802.11g: Connect t he WiFi adapt er t o 802.11b and 802.11g net works
only. Not applicable for all adapt ers.
802.11a, 802.11b, and 802.11g: ( Default ) - Connect t o eit her 802.11a, 802.11b or
802.11g wireless networks. Not applicable for all adapt ers.
OK Saves settings and ret urns to t he previous page.
Cance l Closes and cancels any changes.
Microsoft W indow s* Advanced Opt ions ( Ada pt er Set t in gs)
To access t he Windows* XP Advanced opt ions:
1. Start Windows and log on with adm inist rat ive privileges.
2. From your desktop, right - click M y Com pu t e r and click Pr op er t ie s.
3. Click the H ar dw are t ab.
4. Click De vice M a nager .
5. Double- click Netw or k a da pt er s.
6. Right - click t he nam e of the inst alled WiFi adapter that is in use.
7. Click Proper t ie s.
8. Select the Advance d t ab.
9. Select the propert y you want ( for exam ple, Mixed Mode Prot ect ion, Power Managem ent ) .
10. To select a new value or set t ing, click Use de fa ult value t o clear t he checkbox. Then select a new value or
set ting. To ret urn t o t he default value, click t he Use de fa ult value checkbox. ( The Use default value box
is not present for all properties, for exam ple, Ad Hoc Channel. I n t his case, sim ply select t he set ting you
want.)
11. To save your settings and exit the window, click OK.
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
Regulatory I nform ation
N OTE: Due t o t he evolving st at e of regulat ions and st andards in t he wireless LAN field ( I EEE 802.11
and sim ilar standards) , t he inform at ion provided herein is subj ect t o change. I nt el Corporation
assum es no responsibilit y for errors or om issions in t his docum ent.
I nt el® Centrino® Wireless- N 100
I nt el® Centrino® Wireless- N 105
I nt el® Centrino® Wireless- N 130
I nt el® Centrino® Wireless- N 135
I nt el® WiFi Link 1000
I nt el® Centrino® Wireless- N 1030
I nt el® Centrino® Wireless- N 2200
I nt el® Centrino® Wireless- N 2230
I nt el® Centrino® Wireless- N + WiMAX 6150
I nt el® Centrino® Advanced - N 6200
I nt el® Centrino® Advanced - N 6205
I nt el® Centrino® Advanced - N 6230
I nt el® Centrino® Advanced - N 6235
I nt el® Centrino® Advanced - N + WiMAX 6250
I nt el® Centrino® Ultim ate-N 6300
I nt el W iFi/ W iM AX W ireless Adapt e r s
I nform at ion in t his sect ion supports t he following wireless adapt ers:
I nt el® Centrino® Wireless- N + WiMAX 6150
I nt el® Centrino® Advanced - N + WiMAX 6250
See Specificat ions for com plet e wireless adapt er specifications.
N OTE: I n t his sect ion, all references t o the "wireless adapt er" refer to all adapters list ed above.
The following inform ation is provided:
I nform at ion for the User
Regulat ory I nform at ion
I nform a tion for t he User
Sa fe t y N ot ices
USA—FCC a nd FAA
The FCC wit h its act ion in ET Docket 96 - 8 has adopt ed a safet y st andard for hum an exposure t o radio frequency
(RF) electrom agnet ic energy em it t ed by FCC certified equipm ent. The wireless adapt er m eet s t he Hum an Exposure
lim its found in OET Bulletin 65, supplem ent C, 2001, and ANSI / I EEE C95.1, 1992. Proper operat ion of t his radio
according t o t he instruct ions found in t his m anual will result in exposure subst antially below t he FCCs
recom m ended lim it s.
The following safet y precaut ions should be observed:
Do not t ouch or m ove ant enna while t he unit is transm it t ing or receiving.
Do not hold any com ponent cont aining the radio such t hat t he ant enna is very close or t ouching any
exposed parts of t he body, especially the face or eyes, while t ransm itting.
Do not operat e t he radio or attem pt t o t ransm it dat a unless the ant enna is connect ed; t his behavior m ay
cause dam age t o t he radio.
Use in specific environm ents:
The use of wireless adapt ers in hazardous locations is lim ited by the const raint s posed by t he safet y
direct ors of such environm ent s.
The use of wireless adapt ers on airplanes is governed by the Federal Aviat ion Adm inist rat ion ( FAA) .
The use of wireless adapt ers in hospit als is restricted t o t he lim its set forth by each hospit al.
Ex plosive Device Pr ox im it y W a r ning
W arn ing: Do not operat e a port able transm itter (including t his wireless adapt er) near unshielded blast ing
caps or in an explosive environm ent unless the transm it t er has been m odified t o be qualified for such use.
Ant enna W ar nings
W arn ing: The wireless adapt er is not designed for use wit h high - gain direct ional antennas.
Use On Aircraft Ca ut ion
Ca ution: Regulat ions of the FCC and FAA prohibit airborne operat ion of radio- frequency wireless devices
(wireless adapt ers) because t heir signals could int erfere wit h critical aircraft instrum ent s.
Ot h er W ireless D e vices
Sa fe t y N ot ices for Ot h er Device s in t he W ir eless N et w ork : See t he docum ent at ion supplied wit h wireless
adapt ers or ot her devices in t he wireless network.
Local Re st rict ion s on 8 0 2 .1 1 a, 8 0 2 .1 1 b, 8 0 2 .1 1 g, 8 0 2 .1 1 n, a nd 8 0 2 .1 6 e Radio Usage
Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e
wireless LAN devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g, 802.11n, and
802.16e product s are designed for use only in specific count ries, and are not allowed t o be operat ed in countries
ot her t han t hose of designated use. As a user of these products, you are responsible for ensuring that t he
product s are used only in t he countries for which t hey were int ended and for verifying t hat t hey are configured
wit h the correct selection of frequency and channel for t he count ry of use. The device t ransm it power control
(TPC) int erface is part of t he I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y Soft ware. Operat ional restrictions for
Equivalent I sot ropic Radiat ed Power (EI RP) are provided by t he syst em m anufact urer. Any deviat ion from t he
perm issible power and frequency set t ings for t he country of use is an infringem ent of nat ional law and m ay be
punished as such.
For country -specific inform ation, see t he addit ional com pliance inform ation supplied wit h the product .
W ireless I n t erope rabilit y
The wireless adapt er is designed to be interoperable wit h ot her wireless LAN product s t hat are based on direct
sequence spread spect rum ( DSSS) radio technology and t o com ply wit h t he following st andards:
I EEE St d. 802.11b com pliant St andard on Wireless LAN
I EEE St d. 802.11g com pliant St andard on Wireless LAN
I EEE St d. 802.11a com pliant St andard on Wireless LAN
I EEE St d. 802.11n draft 2.0 com pliant on Wireless LAN
I EEE 802.16e- 2005 Wave 2 com pliant
Wireless Fidelit y cert ification, as defined by t he Wi- Fi Alliance
WiMAX certification as defined by t he WiMAX Forum
The W ir eless Adapt e r and You r H e alt h
The wireless adapt er, like other radio devices, em its radio frequency elect rom agnet ic energy. The level of energy
em it t ed by t he wireless adapt er, however, is less t han the electrom agnet ic energy em itted by other wireless
devices such as m obile phones. The wireless adapter operates wit hin t he guidelines found in radio frequency safet y
st andards and recom m endat ions. These standards and recom m endat ions reflect t he consensus of the scient ific
com m unit y and result from deliberat ions of panels and com m it tees of scientist s who cont inually review and
int erpret the extensive research lit erature. I n som e sit uat ions or environm ent s, t he use of the wireless adapt er
m ay be restrict ed by t he propriet or of t he building or responsible represent at ives of t he applicable organizat ion.
Exam ples of such sit uat ions m ay include:
Using the wireless adapt er on board airplanes, or
Using the wireless adapt er in any ot her environm ent where the risk of int erference wit h other devices or
services is perceived or identified as being harm ful.
I f you are uncert ain of the policy t hat applies t o t he use of wireless adapt ers in a specific organizat ion or
environm ent ( an airport , for exam ple) , you are encouraged t o ask for authorizat ion t o use the adapt er before you
turn it on.
W EEE
Re gula tory I nform a t ion
I n form a t ion for t he OEM s a nd I ntegra t or s
The following st at em ent m ust be included wit h all versions of t his docum ent supplied t o an OEM or integrator, but
should not be dist ributed t o t he end user.
This device is intended for OEM integrat ors only.
Please see t he full Grant of Equipm ent docum ent for other restrictions.
This device m ust be operat ed and used wit h a locally approved access point.
Any changes or m odificat ions t o t his product not expressly approved by I nt el could void t he user's
aut horizat ion to operat e t he product .
The requirem ents described within t his docum ent are provided t o OEM integrat ors inst alling I nt el® wireless
adapt ers in host plat form s. St rict adherence t o t hese requirem ents is necessary t o m eet t he condit ions of
com pliance wit h FCC rules, including RF exposure. When all requirem ent s described herein are fulfilled, t he I nt el®
wireless adapters m ay be inst alled in host plat form s wit h no furt her restrictions when incorporat ing int o host
syst em s. I f any of t he requirem ents herein are not sat isfied, t he OEM int egrat or is responsible to conduct t he
necessary syst em level regulatory t esting and/ or obtain t he required approvals for com pliance.
Ant enna Ty pe and Ga ins
Only ant ennas of t he sam e t ype and wit h equal or less gains as shown below m ay be used wit h the I nt el®
wireless adapters. Ot her t ypes of antennas and/ or higher gain antennas are not aut horized.
Ant enna Ty pe Ant enna Loca t ion
( Main/ Au x)
2 .4 GH z
Pe ak Gain
in dBi*
2 .6 GH z
Pe ak Gain
in dBi*
5 .2 GH z
Pe ak Gain
in dBi*
5 .5 GH z
Pe ak Gain
in dBi*
5 .7 GHz
Pe ak Gain
in dBi*
PI FA Main 3.24 3.47 3.73 4.77 4.97
Aux
MI MO
* All ant enna gains include cable loss.
Ant enna Placem ent W it hin t he H ost Syst em
To ensure RF exposure com pliance, the ant enna( s) used wit h the I nt el® wireless adapt ers m ust be inst alled in t he
host syst em t o provide a m inim um separat ion dist ance from all persons, in all operat ing m odes and orientat ions of
the host syst em , wit h st rict adherence to the t able below. The ant enna separat ion distance applies t o bot h
horizont al and vert ical orient at ion of the ant enna when inst alled in t he host syst em .
W ireless Adapt e r Minim um r equired ant enna - to- user
sepa rat ion dist ance
I nt el® Centrino® Wireless- N + WiMAX 6150 18 m m
I nt el® Centrino® Wireless- N + WiMAX 6350 17 m m
Sim ult ane ous Transm ission of I n t el® W ireless Adapter s w it h Ot h er I ntegra t e d or Plug - I n Tran sm it t e rs
Based upon FCC Knowledge Dat abase publicat ion num ber 616217 D03 Supplem ent
ht t ps: / / fj allfoss.fcc.gov/ kdb/ Get At t achm ent .ht m l?id= 30257, when there are m ult iple transm it t ing devices inst alled
in a host device, an RF exposure t ransm it t ing assessm ent shall be perform ed t o det erm ine t he necessary
application and t est requirem ents. OEM int egrat ors m ust ident ify all possible com binat ions of sim ult aneous
transm ission configurations for all t ransm it t ers and antennas installed in t he host syst em . This includes
transm itters installed in t he host as m obile devices ( > 20 cm separat ion from user) and portable devices ( < 20 cm
separat ion from user). OEM int egrat ors should consult t he act ual FCC KDB 616217 D03 Supplem ent docum ent for
all det ails in m aking t his assessm ent t o det erm ine if any additional requirem ents for t est ing or FCC approval is
necessary.
I n form a t ion To Be Supplie d t o t he End User by t he OEM or I nt egr a t or
The following regulatory and safet y not ices m ust be published in docum entat ion supplied to the end user of t he
product or syst em incorporating t he I ntel® wireless adapt er, in com pliance with local regulat ions. Host syst em
m ust be labeled wit h "Cont ains FCC I D: XXXXXXXX" , FCC I D displayed on label.
The I nt el® wireless adapt er m ust be inst alled and used in st rict accordance wit h the m anufact urer's inst ruct ions as
described in the user docum ent at ion that com es wit h the product . I nt el Corporat ion is not responsible for any
radio or t elevision interference caused by unauthorized m odificat ion of the devices included wit h the wireless
adapt er kit or t he subst it ut ion or attachm ent of connecting cables and equipm ent ot her than t hat specified by I nt el
Corporat ion. The correct ion of interference caused by such unaut horized m odificat ion, substitut ion or at tachm ent is
the responsibilit y of t he user. I ntel Corporat ion and authorized resellers or dist ributors are not liable for any
dam age or violation of governm ent regulat ions t hat m ay arise from t he user failing t o com ply wit h these
guidelines.
Local Re st rict ion of 8 0 2 .1 1 a , 8 0 2 .1 1 b, 8 0 2 .1 1 g, and 8 0 2 .1 1 n Radio Usage
The following st at em ent on local rest rict ions m ust be published as part of t he com pliance docum entat ion for all
802.11a, 802.11b, 802.11g and 802.11n products.
Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.16e
wireless LAN devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g, 802.11n, and
802.16e product s are designed for use only in specific count ries, and are not allowed t o be operat ed in countries
ot her t han t hose of designated use. As a user of these products, you are responsible for ensuring that t he
product s are used only in t he countries for which t hey were int ended and for verifying t hat t hey are configured
wit h the correct selection of frequency and channel for t he count ry of use. Any deviation from t he perm issible
power and frequency set t ings for t he country of use is an infringem ent of nat ional law and m ay be punished as
such.
FCC Ra dio Fr equency I n te rfer ence Re qu ir em ents
This wireless adapt er is rest rict ed t o indoor use due t o its operat ion in the 5.15 to 5.25 GHz frequency range. FCC
requires this wireless adapt er t o be used indoors for t he frequency range 5.15 t o 5.25 GHz t o reduce t he pot ent ial
for harm ful interference t o co- channel m obile satellit e syst em s. High power radars are allocated as prim ary users
of t he 5.25 to 5.35 GHz and 5.65 t o 5.85 GHz bands. These radar st at ions can cause int erference wit h and / or
dam age t his device.
6250
This wireless adapt er is int ended for OEM int egrat ors only.
This wireless adapt er cannot be co- locat ed wit h any ot her transm it t er unless approved by t he FCC.
USA—Fe deral Com m u nica t ion s Com m ission ( FCC)
This wireless adapt er com plies wit h Part 15 of t he FCC Rules. Operat ion of t he device is subj ect t o t he following
two conditions:
This device m ay not cause harm ful interference.
This device m ust accept any int erference t hat m ay cause undesired operat ion.
I n t erfere nce St at em ent
This wireless adapt er has been t est ed and found t o com ply wit h the lim it s for a Class B digital device, pursuant t o
Part 15 of the FCC Rules. These lim its are designed t o provide reasonable prot ect ion against harm ful interference
in a resident ial inst allat ion. This wireless adapter generat es, uses, and can radiat e radio frequency energy. I f t he
wireless adapter is not installed and used in accordance wit h the inst ruct ions, t he wireless adapt er m ay cause
harm ful int erference t o radio com m unicat ions. There is no guarantee, however, t hat such int erference will not
occur in a particular inst allation. I f t his wireless adapt er does cause harm ful interference t o radio or t elevision
recept ion ( which can be det erm ined by turning t he equipm ent off and on) , t he user is encouraged to try t o correct
the interference by t aking one or m ore of the following m easures:
Reorient or relocat e t he receiving ant enna of t he equipm ent experiencing t he int erference.
I ncrease the dist ance bet ween t he wireless adapt er and t he equipm ent experiencing t he int erference.
Connect t he com puter wit h the wireless adapt er t o an out let on a circuit different from t hat to which t he
equipm ent experiencing t he int erference is connect ed.
Consult t he dealer or an experienced radio/ TV t echnician for help.
N OTE: The adapt er m ust be inst alled and used in strict accordance wit h the m anufact urer's
inst ruct ions as described in the user docum entat ion that com es wit h the product . Any other installat ion
or use will violat e FCC Part 15 regulations.
Safety Approva l Considerat ions
This device has been safety approved as a com ponent and is for use only in com plet e equipm ent where t he
accept abilit y of t he com binat ion is determ ined by t he appropriat e safet y agencies. When inst alled, considerat ion
m ust be given t o t he following:
I t m ust be inst alled int o a com pliant host device m eeting the requirem ent of UL/ EN/ I EC 60950 - 1 2nd edit ion
including t he general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 ( Fire Enclosure) .
The device shall be supplied by a SELV source when installed in t he end -use equipm ent .
A heat ing t est shall be considered in t he end - use product for m eet ing the requirem ent of UL/ EN/ I EC 60950 -
1 2nd edit ion.
Low H alogen
Applies only t o brom inat ed and chlorinated flam e retardants (BFRs/ CFRs) and PVC in t he final product. I nt el
com ponent s as well as purchased com ponent s on the finished assem bly m eet JS- 709 requirem ent s, and t he PCB /
subst rat e m eet I EC 61249 - 2 - 21 requirem ent s. The replacem ent of halogenat ed flam e retardants and/ or PVC m ay
not be bet t er for the environm ent.
Taiw an
Ra dio Approva ls
To determ ine whether you are allowed to use your wireless network device in a specific country, please check to
see if t he radio type num ber t hat is print ed on t he ident ification label of your device is listed in t he m anufact urer's
OEM Regulat ory Guidance docum ent.
Re gula tory Mark ings
A list of required regulatory m arkings can be found on t he web at http: / / www.int el.com / support / wireless/ wlan/
To find the regulat ory inform ation for your adapt er, click on the link for your adapter. Then click Ad dit ion a l
I n for m a t ion > Re gulat ory Docum ent s.
I nt el W iFi Adapt e rs, 8 0 2 .1 1 n Com plia nt
The inform at ion in t his sect ion applies t o t he following product s:
I nt el® Centrino® Wireless- N 100
I nt el® Centrino® Wireless- N 105
I nt el® Centrino® Wireless- N 130
I nt el® Centrino® Wireless- N 135
I nt el® WiFi Link 1000
I nt el® Centrino® Wireless- N 1030
I nt el® Centrino® Wireless- N 2200
I nt el® Centrino® Wireless- N 2230
I nt el® Centrino® Advanced - N 6200
I nt el® Centrino® Advanced - N 6205
I nt el® Centrino® Advanced - N 6230
I nt el® Centrino® Advanced - N 6235
I nt el® Centrino® Ultim ate-N 6300
See Specificat ions for wireless adapt er specifications.
N OTE: I n t his sect ion, all references t o the "wireless adapt er" refer to all adapters list ed above.
The following inform ation is provided:
I nform at ion for the User
Regulat ory I nform at ion
I nform a tion for t he User
Sa fe t y N ot ices
USA—FCC a nd FAA
The FCC wit h its act ion in ET Docket 96 - 8 has adopt ed a safet y st andard for hum an exposure t o radio frequency
(RF) electrom agnet ic energy em it t ed by FCC certified equipm ent. The wireless adapt er m eet s t he Hum an Exposure
lim its found in OET Bulletin 65, supplem ent C, 2001, and ANSI / I EEE C95.1, 1992. Proper operat ion of t his radio
according t o t he instruct ions found in t his m anual will result in exposure subst antially below t he FCCs
recom m ended lim it s.
The following safet y precaut ions should be observed:
Do not t ouch or m ove ant enna while t he unit is transm it t ing or receiving.
Do not hold any com ponent cont aining the radio such t hat t he ant enna is very close or t ouching any
exposed parts of t he body, especially the face or eyes, while t ransm itting.
Do not operat e t he radio or attem pt t o t ransm it dat a unless the ant enna is connect ed; t his behavior m ay
cause dam age t o t he radio.
Use in specific environm ents:
The use of wireless adapt ers in hazardous locations is lim ited by the const raint s posed by t he safet y
direct ors of such environm ent s.
The use of wireless adapt ers on airplanes is governed by the Federal Aviat ion Adm inist rat ion ( FAA) .
The use of wireless adapt ers in hospit als is restricted t o t he lim its set forth by each hospit al.
Ex plosive Device Pr ox im it y W a r ning
W arn ing: Do not operat e a port able transm itter (including t his wireless adapt er) near unshielded blast ing
caps or in an explosive environm ent unless the transm it t er has been m odified t o be qualified for such use.
Ant enna W ar nings
W arn ing: The wireless adapt er is not designed for use wit h high - gain direct ional antennas.
Use On Aircraft Ca ut ion
Ca ution: Regulat ions of the FCC and FAA prohibit airborne operat ion of radio- frequency wireless devices
(wireless adapt ers) because t heir signals could int erfere wit h critical aircraft instrum ent s.
Ot h er W ireless D e vices
Sa fe t y N ot ices for Ot h er Device s in t he W ir eless N et w ork : See t he docum ent at ion supplied wit h wireless
adapt ers or ot her devices in t he wireless network.
Local Re st rict ion s on 8 0 2 .1 1 a, 8 0 2 .1 1 b, 8 0 2 .1 1 g a nd 8 0 2 .1 1 n Radio Usa ge
Ca ut io n: Due t o t he fact t hat t he frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN
devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g and 802.11n product s are
designed for use only in specific count ries, and are not allowed to be operat ed in countries ot her t han those of
designat ed use. As a user of t hese products, you are responsible for ensuring that t he product s are used only in
the count ries for which they were int ended and for verifying t hat t hey are configured wit h the correct select ion of
frequency and channel for t he country of use. The device transm it power control ( TPC) interface is part of t he
I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y Soft ware. Operat ional restrict ions for Equivalent I sot ropic Radiat ed
Power ( EIRP) are provided by t he syst em m anufact urer. Any deviat ion from t he perm issible power and frequency
set tings for t he country of use is an infringem ent of nat ional law and m ay be punished as such.
For country -specific inform ation, see t he addit ional com pliance inform ation supplied wit h the product .
W ireless I n t erope rabilit y
The wireless adapt er is designed to be interoperable wit h ot her wireless LAN product s t hat are based on direct
sequence spread spect rum ( DSSS) radio technology and t o com ply wit h t he following st andards:
I EEE St d. 802.11b com pliant St andard on Wireless LAN
I EEE St d. 802.11g com pliant St andard on Wireless LAN
I EEE St d. 802.11a com pliant St andard on Wireless LAN
I EEE St d. 802.11n draft 2.0 com pliant on Wireless LAN
Wireless Fidelit y cert ification, as defined by t he Wi- Fi Alliance
The W ir eless Adapt e r and You r H e alt h
The wireless adapt er, like other radio devices, em its radio frequency elect rom agnet ic energy. The level of energy
em it t ed by t he wireless adapt er, however, is less t han the electrom agnet ic energy em itted by other wireless
devices such as m obile phones. The wireless adapter operates wit hin t he guidelines found in radio frequency safet y
st andards and recom m endat ions. These standards and recom m endat ions reflect t he consensus of the scient ific
com m unit y and result from deliberat ions of panels and com m it tees of scientist s who cont inually review and
int erpret the extensive research lit erature. I n som e sit uat ions or environm ent s, t he use of the wireless adapt er
m ay be restrict ed by t he propriet or of t he building or responsible represent at ives of t he applicable organizat ion.
Exam ples of such sit uat ions m ay include:
Using the wireless adapt er on board airplanes, or
Using the wireless adapt er in any ot her environm ent where the risk of int erference wit h other devices or
services is perceived or identified as being harm ful.
I f you are uncert ain of the policy t hat applies t o t he use of wireless adapt ers in a specific organizat ion or
environm ent ( an airport , for exam ple) , you are encouraged t o ask for authorizat ion t o use the adapt er before you
turn it on.
W EEE
Re gula tory I nform a t ion
I n form a t ion for t he OEM s a nd I ntegra t or s
The following st at em ent m ust be included wit h all versions of t his docum ent supplied t o an OEM or integrator, but
should not be dist ributed t o t he end user.
This device is intended for OEM integrat ors only.
Please see t he full Grant of Equipm ent docum ent for other restrictions.
This device m ust be operat ed and used wit h a locally approved access point.
Any changes or m odificat ions t o t his product not expressly approved by I nt el could void t he user's
aut horizat ion to operat e t he product .
The requirem ents described within t his docum ent are provided t o OEM integrat ors inst alling I nt el® wireless
adapt ers in host plat form s. St rict adherence t o t hese requirem ents is necessary t o m eet t he condit ions of
com pliance wit h FCC and I ndust ry Canada rules, including RF exposure. When all requirem ent s described herein
are fulfilled, the I nt el® wireless adapt ers m ay be inst alled in host plat form s wit h no further rest rict ions when
incorporat ing int o host syst em s. I f any of the requirem ent s herein are not sat isfied, t he OEM int egrat or is
responsible t o conduct t he necessary syst em level regulat ory test ing and/ or obtain t he required approvals for
com pliance.
Ant enna Ty pe and Ga ins
Only ant ennas of t he sam e t ype and wit h equal or less gains as shown below m ay be used wit h the I nt el®
wireless adapters. Ot her t ypes of antennas and/ or higher gain antennas are not aut horized.
Ant enna Ty pe Ant enna Loca t ion 2 .4 GHz 2 .6 GHz 5 .2 GHz 5 .5 GHz 5 .7 GH z
( Main/ Au x) Pe ak Gain
in dBi*
Pe ak Gain
in dBi*
Pe ak Gain
in dBi*
Pe ak Gain
in dBi*
Pe ak Gain
in dBi*
PI FA Main 3.24 3.47 3.73 4.77 4.97
Aux
MI MO
* All ant enna gains include cable loss.
Ant enna Placem ent W it hin t he H ost Syst em
To ensure RF exposure com pliance, the ant enna( s) used wit h the I nt el® wireless adapt ers m ust be inst alled in t he
host syst em t o provide a m inim um separat ion dist ance from all persons, in all operat ing m odes and orientat ions of
the host syst em , wit h st rict adherence to the t able below. The ant enna separat ion distance applies t o bot h
horizont al and vert ical orient at ion of the ant enna when inst alled in t he host syst em .
W ireless Adapt e r Minim um r equired ant enna - to- user
sepa rat ion dist ance
I nt el® Centrino® Wireless- N 100 9 m m
I nt el® Centrino® Wireless- N 105 9 m m
I nt el® Centrino® Wireless- N 130 8 m m
I nt el® Centrino® Wireless- N 135 9 m m
I nt el® WiFi Link 1000* 20 m m
I nt el® Centrino® Wireless- N 1030 8 m m
I nt el® Centrino® Wireless- N 2200 9 m m
I nt el® Centrino® Wireless- N 2230 9 m m
I nt el® Centrino® Advanced - N 6200* 20 m m
I nt el® Centrino® Advanced - N 6205 12 m m
I nt el® Centrino® Advanced - N 6230 12 m m
I nt el® Centrino® Advanced - N 6235 12 m m
I nt el® Centrino® Ultim ate-N 6300 13 m m
* This wireless adapt er m ay be inst alled in m obile devices only
(requires > 20 cm antenna separat ion from t he body of user).
Sim ult ane ous Transm ission of I n t el® W ireless Adapter s w it h Ot h er I ntegra t e d or Plug - I n Tran sm it t e rs
Based upon FCC Knowledge Dat abase publicat ion num ber 616217 D03 Supplem ent
ht t ps: / / fj allfoss.fcc.gov/ kdb/ Get At t achm ent .ht m l?id= 30257, when there are m ult iple transm it t ing devices inst alled
in a host device, an RF exposure t ransm it t ing assessm ent shall be perform ed t o det erm ine t he necessary
application and t est requirem ents. OEM int egrat ors m ust ident ify all possible com binat ions of sim ult aneous
transm ission configurations for all t ransm it t ers and antennas installed in t he host syst em . This includes
transm itters installed in t he host as m obile devices ( > 20 cm separat ion from user) and portable devices ( < 20 cm
separat ion from user). OEM int egrat ors should consult t he act ual FCC KDB 616217 D03 Supplem ent docum ent for
all det ails in m aking t his assessm ent t o det erm ine if any additional requirem ents for t est ing or FCC approval is
necessary.
I n form a t ion To Be Supplie d t o t he End User by t he OEM or I nt egr a t or
The following regulatory and safet y not ices m ust be published in docum entat ion supplied to the end user of t he
product or syst em incorporating t he I ntel® wireless adapt er, in com pliance with local regulat ions. Host syst em
m ust be labeled wit h "Cont ains FCC I D: XXXXXXXX" , FCC I D displayed on label.
The wireless adapt er m ust be installed and used in strict accordance wit h the m anufact urer's instructions as
described in the user docum ent at ion that com es wit h the product . For count ry -specific approvals, see Radio
cm
cm
Approvals. I nt el Corporation is not responsible for any radio or t elevision interference caused by unaut horized
m odificat ion of the devices included wit h t he wireless adapt er kit or t he subst it ut ion or attachm ent of connecting
cables and equipm ent other t han that specified by I ntel Corporat ion. The correct ion of int erference caused by such
unaut horized m odificat ion, substitut ion or at tachm ent is t he responsibility of the user. I nt el Corporat ion and
aut horized resellers or dist ributors are not liable for any dam age or violation of governm ent regulat ions t hat m ay
arise from t he user failing to com ply wit h these guidelines.
Local Re st rict ion of 8 0 2 .1 1 a , 8 0 2 .1 1 b, 8 0 2 .1 1 g, and 8 0 2 .1 1 n Radio Usage
The following st at em ent on local rest rict ions m ust be published as part of t he com pliance docum entat ion for all
802.11a, 802.11b, 802.11g and 802.11n products.
Ca ution: Due to the fact t hat the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN
devices m ay not yet be harm onized in all count ries, 802.11a, 802.11b, 802.11g and 802.11n product s are
designed for use only in specific count ries, and are not allowed to be operat ed in countries ot her t han those of
designat ed use. As a user of t hese products, you are responsible for ensuring that t he product s are used only in
the count ries for which they were int ended and for verifying t hat t hey are configured wit h the correct select ion of
frequency and channel for t he country of use. Any deviat ion from perm issible settings and rest rict ions in t he
count ry of use could be an infringem ent of nat ional law and m ay be punished as such.
FCC Ra dio Fr equency I n te rfer ence Re qu ir em ents
This device is restrict ed t o indoor use due t o it s operat ion in t he 5.15 t o 5.25 GHz and 5.470 t o 5.725 GHz
frequency ranges. FCC requires this product t o be used indoors for the frequency ranges 5.15 to 5.25 GHz and
5.470 t o 5.725 GHz to reduce t he potent ial for harm ful interference to co- channel m obile sat ellit e syst em s. High
power radars are allocated as prim ary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
st at ions can cause int erference wit h and / or dam age t his device. No configurat ion cont rols are provided for t his
wireless adapter allowing any change in t he frequency of operations outside the FCC grant of aut horization for U.S
operat ion according t o Part 15.407 of t he FCC rules.
This device is intended for OEM integrat ors only.
This device cannot be co- located wit h any ot her transm it t er unless approved by t he FCC.
USA—Fe deral Com m u nica t ion s Com m ission ( FCC)
This device com plies wit h Part 15 of t he FCC Rules. Operat ion of t he device is subj ect t o t he following t wo
conditions:
This device m ay not cause harm ful interference.
This device m ust accept any int erference t hat m ay cause undesired operat ion.
N OTE: The radiat ed out put power of the adapt er is far below t he FCC radio frequency exposure lim it s.
Nevert heless, t he adapt er should be used in such a m anner that t he potent ial for hum an cont act
during norm al operat ion is m inim ized. To avoid t he possibility of exceeding t he FCC radio frequency
exposure lim it s, you should keep a dist ance of at least 20cm bet ween you ( or any ot her person in t he
vicinity) , or t he m inim um separat ion dist ance as specified by the FCC grant condit ions, and the
ant enna that is built into t he com puter. Det ails of the authorized configurat ions can be found at
ht t p: / / www.fcc.gov/ oet/ ea/ by entering t he FCC I D num ber on t he device.
I n t erfere nce St at em ent
This wireless adapt er has been t est ed and found t o com ply wit h the lim it s for a Class B digital device, pursuant t o
Part 15 of the FCC Rules. These lim its are designed t o provide reasonable prot ect ion against harm ful interference
in a resident ial inst allat ion. This wireless adapter generat es, uses, and can radiat e radio frequency energy. I f t he
wireless adapter is not installed and used in accordance wit h the inst ruct ions, t he wireless adapt er m ay cause
harm ful int erference t o radio com m unicat ions. There is no guarantee, however, t hat such int erference will not
occur in a particular inst allation. I f t his wireless adapt er does cause harm ful interference t o radio or t elevision
recept ion ( which can be det erm ined by turning t he equipm ent off and on) , t he user is encouraged to try t o correct
the interference by t aking one or m ore of the following m easures:
Reorient or relocat e t he receiving ant enna of t he equipm ent experiencing t he int erference.
I ncrease the dist ance bet ween t he wireless adapt er and t he equipm ent experiencing t he int erference.
Connect t he com puter wit h the wireless adapt er t o an out let on a circuit different from t hat to which t he
equipm ent experiencing t he int erference is connect ed.
Consult t he dealer or an experienced radio/ TV t echnician for help.
N OTE: The adapt er m ust be inst alled and used in strict accordance wit h the m anufact urer's
inst ruct ions as described in the user docum entat ion that com es wit h the product . Any other installat ion
or use will violat e FCC Part 15 regulations.
Safety Approva l Considerat ions
This device has been safety approved as a com ponent and is for use only in com plet e equipm ent where t he
accept abilit y of t he com binat ion is determ ined by t he appropriat e safet y agencies. When inst alled, considerat ion
m ust be given t o t he following:
I t m ust be inst alled int o a com pliant host device m eeting the requirem ent of UL/ EN/ I EC 60950 - 1 2nd edit ion
including t he general provisions of enclosure design 1.6.2 and specifically paragraph 1.2.6.2 ( Fire Enclosure) .
The device shall be supplied by a SELV source when installed in t he end -use equipm ent .
A heat ing t est shall be considered in t he end - use product for m eet ing the requirem ent of UL/ EN/ I EC 60950 -
1 2nd edit ion.
Low H alogen
Applies only t o brom inat ed and chlorinated flam e retardants (BFRs/ CFRs) and PVC in t he final product. I nt el
com ponent s as well as purchased com ponent s on the finished assem bly m eet JS- 709 requirem ent s, and t he PCB /
subst rat e m eet I EC 61249 - 2 - 21 requirem ent s. The replacem ent of halogenat ed flam e retardants and/ or PVC m ay
not be bet t er for the environm ent.
Canada I ndust ry Ca nada ( I C)
This device com plies wit h I ndust ry Canada licence- exem pt RSS standard( s) . Operation is subj ect t o t he following
two conditions: ( 1) t his device m ay not cause int erference, and ( 2) this device m ust accept any interference,
including int erference that m ay cause undesired operat ion of t he device.
Cet appareil se conform e à Canada d'I ndust rie norm es de RSS perm is- exem pt. L'opérat ion est assuj et t i au suivre
deux condit ions : ( 1) cet appareil ne peut pas causer l'intervent ion, et ( 2) cet appareil doit accept er de
l'int ervention, y com pris l'intervent ion qui peut causer l'opérat ion non désirée de l'appareil.
Ca ut io n: When using I EEE 802.11a wireless LAN, t his product is rest rict ed t o indoor use due t o it s operat ion in
the 5.15 - t o 5.25 - GHz frequency range. I ndustry Canada requires t his product t o be used indoors for the
frequency range of 5.15 GHz t o 5.25 GHz to reduce t he potent ial for harm ful interference to co- channel m obile
sat ellit e syst em s. High power radar is allocat ed as the prim ary user of t he 5.25 - t o 5.35 - GHz and 5.65 to 5.85 -
GHz bands. These radar st at ions can cause interference wit h and/ or dam age t o t his device. The m axim um allowed
ant enna gain for use wit h t his device is 6dBi in order to com ply wit h the E.I .R.P lim it for t he 5.25 - t o 5.35 and
5.725 t o 5.85 GHz frequency range in point - to -point operat ion. To com ply wit h RF exposure requirem ents all
ant ennas should be located at a m inim um dist ance of 20cm , or t he m inim um separat ion distance allowed by the
m odule approval, from t he body of all persons.
At t e nt ion : lutilisat ion dun réseau sans fil I EEE802.11a est réstreint e à une ut ilisation en int érieur à cause du
fonct ionem ent dans la bande de fréquence 5.15- 5.25 GHz. I ndust ry Canada requiert que ce produit soit utilisé à
lint érieur des bât im ent s pour la bande de fréquence 5.15 - 5.25 GHz afin de réduire les possibilités dint erférences
nuisibles aux canaux co- existant s des syst èm es de t ransm ission sat ellites. Les radars de puissances ont fait lobj et
dune allocat ion prim aire de fréquences dans les bandes 5.25 - 5.35 GHz et 5.65 - 5.85 GHz. Ces st at ions radar
peuvent créer des interférences avec ce produit et / ou lui être nuisible. Le gain dant enne m axim um perm issible
pour une ut ilisat ion avec ce produit est de 6 dBi afin dêt re conform e aux lim ites de puissance isot ropique
rayonnée équivalent e (P.I .R.E.) applicable dans les bandes 5.25- 5.35 GHz et 5.725-5.85 GHz en fonctionem ent
point - à- point . Se pour conform er aux condit ions d'exposition de RF tout es les antennes devraient être localies à
une distance m inim um de 20 cm , ou la dist ance de séparat ion m inim um perm ise par l'approbation de m odule, du
corps de t out es les personnes.
This device com plies wit h I ndust ry Canada licence- exem pt RSS standard( s) . Operation is subj ect t o t he following
two conditions: ( 1) t his device m ay not cause int erference, and ( 2) this device m ust accept any interference,
including int erference that m ay cause undesired operat ion of t he device.
Cet appareil se conform e à Canada d'I ndust rie norm es de RSS perm is- exem pt. L'opérat ion est assuj et t i au suivre
deux condit ions : ( 1) cet appareil ne peut pas causer l'intervent ion, et ( 2) cet appareil doit accept er de
l'int ervention, y com pris l'intervent ion qui peut causer l'opérat ion non désirée de l'appareil.
Under I ndust ry Canada regulat ions, t his radio t ransm itter m ay only operat e using an ant enna of a t ype and
m axim um ( or lesser) gain approved for the t ransm it t er by I ndust ry Canada. To reduce pot ent ial radio int erference
to ot her users, t he ant enna type and it s gain should be so chosen t hat the equivalent isotropically radiat ed power
(e.i.r.p.) is not m ore t han t hat necessary for successful com m unicat ion.
Sous les règlem ent s de Canada d'I ndust rie, cet ém et t eur de radio peut fonct ionner utilisant seulem ent une antenne
d'un t ype et un m axim um ( ou m oindre) le gain a approuvé pour l'ém etteur par Canada d'I ndustrie. Pour réduire
l'int ervention potent ielle de radio aux aut res utilisat eurs, le t ype d'ant enne et son gain devrait êt re si choisie que
l'équivalent a rayonné d'isot ropiem ent le pouvoir (e.i.r.p.) n'est pas plus que ce nécessaire pour la com m unicat ion
réussie.
Europea n Union
The low band 5.15 - 5.35 GHz is for indoor use only.
This equipm ent com plies wit h t he essential requirem ents of the European Union direct ive 1999/ 5/ EC. See
St atem ent s of European Union Com pliance.
Europe a n Union Declarat ions of Confor m it y
The European Union Declarat ion of Conform it y for each adapt er is available at :
ht t p: / / www.int el.com / support / wireless/ wlan/ .
To find the Declarat ion of Conform it y for your adapter, click on t he link for your adapt er. Then click Ad dit ion al
I n for m a t ion > Re gulat ory Docum ent s.
Japan
I ndoor use only in t he 5Ghz band.
Kor ea
Morocco
The operat ion of t his product in t he radio channel 2 ( 2417 MHz) is not authorized in t he following cit ies: Agadir,
Assa-Zag, Cabo Negro, Chaouen, Goulm im a, Oujda, Tan Tan, Taourirt, Taroudant and Taza.
The operat ion of t his product in t he radio channels 4, 5, 6 et 7 ( 2425 - 2442 MHz) is not aut horized in t he
following cit ies: roport Moham ed V, Agadir, Aguelm ous, Anza, Benslim ane, Béni Hafida, Cabo Negro, Casablanca,
Fès, Lakbab, Marrakech, Merchich, Moham m édia, Rabat , Salé, Tanger, Tan Tan, Taounat e, Tit Mellil, Zag.
Taiw an
Ra dio Approva ls
To determ ine whether you are allowed to use your wireless network device in a specific country, please check to
see if t he radio type num ber t hat is print ed on t he ident ification label of your device is listed in t he m anufact urer's
OEM Regulat ory Guidance docum ent.
Re gula tory Mark ings
A list of required regulatory m arkings can be found on t he web at http: / / www.int el.com / support / wireless/ wlan/
To find the regulat ory inform ation for your adapt er, click on the link for your adapter. Then click Ad dit ion a l
I n for m a t ion > Re gulat ory Docum ent s.
St atem ent of European Com plia nce
Each of the adapt ers list ed below com ply wit h t he essential requirem ents of the European Union direct ive
1999/ 5/ EC.
I nt el® Centrino® Wireless- N 100
I nt el® Centrino® Wireless- N 105
I nt el® Centrino® Wireless- N 130
I nt el® Centrino® Wireless- N 135
I nt el® WiFi Link 1000
I nt el® Centrino® Wireless- N 1030
I nt el® Centrino® Wireless- N 2200
I nt el® Centrino® Wireless- N 2230
I nt el® Centrino® Wireless- N + WiMAX 6150
I nt el® Centrino® Advanced - N 6200
I nt el® Centrino® Advanced - N 6205
I nt el® Centrino® Advanced - N 6230
I nt el® Centrino® Advanced - N 6235
I nt el® Centrino® Advanced - N + WiMAX 6250
I nt el® Centrino® Ultim ate-N 6300
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
Specifica t ion s
I nt el® Centrino® Wireless- N 100
I nt el® Centrino® Wireless- N 105
I nt el® Centrino® Wireless- N 130
I nt el® Centrino® Wireless- N 135
I nt el® WiFi Link 1000
I nt el® Centrino® Wireless- N 1030
I nt el® Centrino® Wireless- N 2200
I nt el® Centrino® Wireless- N 2230
I nt el® Centrino® Wireless- N + WiMAX 6150
I nt el® Centrino® Advanced - N 6200
I nt el® Centrino® Advanced - N 6205
I nt el® Centrino® Advanced - N 6230
I nt el® Centrino® Advanced - N 6235
I nt el® Centrino® Advanced - N + WiMAX 6250
I nt el® Centrino® Ultim ate-N 6300
I nt el® Centrino® W ireless- N 1 0 0 , I ntel® Ce nt rino® W irele ss- N 1 0 5 ,
I nt el® Centrino® W ireless- N 1 3 0 and
I nt el® Centrino® W ireless- N 1 3 5
Form Factor PCI Express* Half-Mini Card
Dim ensions Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna I nterface
Connector
Hirose U.FL- R- SMT m at es wit h cable connector U.FL- LP- 066
Ant enna Diversit y On - board diversit y
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% to 95% non -condensing ( at tem peratures of 25 º C to 35 º C)
W iFi
Frequency
Modulat ion
2.4 GHz ( 802.11b/ g/ n)
Frequency band 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless Medium 2.4 GHz I SM: Orthogonal Frequency Division Mult iplexing (OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n Data
Rat es
MI MO Configurat ion: 1X1
Tx / Rx : 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30,
28.9, 21.7, 15, 14.4, 7.2 Mbps
I EEE 802.11g Data
Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rat es
Bluetoot h Support I ntel® Cent rino® Wireless- N 100: None
I nt el® Centrino® Wireless- N 105: None
I nt el® Centrino® Wireless- N 130: Bluetoot h 2.1, 2.1 + EDR, 3.0, 3.0+ HS
I nt el® Centrino® Wireless- N 135: Bluetoot h 4.0 ( Bluetooth Low - Energy and Bluet ooth
3.0 + HS)
Gene ral
Operat ing Syst em s Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11n, WPA- Personal, WPA- Enterprise, WPA2-
Personal, WPA2-Ent erprise, WMM, WPS
Cisco Com patible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
I EEE Feat ure Sets I EEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2- Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP
128- bit and 64 - bit; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS,
EAP- AKA
Product Safet y UL, C- UL, CB ( I EC 60590)
I nt el® W iFi Link 1 0 0 0
W iFi / W iM AX
Form Factor PCI Express* Mini Card and Half- Mini Card
SKUs I nt el® WiFi Link 1000 - 1X2 MC/ HMC
Dim ensions Mini Card: Widt h 2.0 in x Length 1.18 in x Height 0.18 in ( 50.80 m m x 30 m m x 4.5
m m )
Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m
x 4.5 m m )
Ant enna I nterface
Connector
Hirose U.FL- R- SMT m at es wit h cable connect or U.FL- LP- 066
Ant enna Diversit y On - board diversit y
Connector I nt erface 52- pin Mini Card edge connect or
Volt age 3.3 V
Operat ing Tem perat ure 0 to + 80 degrees Celsius
Hum idity 50% t o 90% non - condensing ( at tem perat ures of 25 º C to 35 º C)
W iFi
Frequency Modulat ion 2.4 GHz ( 802.11b/ g/ n)
Frequency band 2.41- 2.474 GHz ( dependent on country)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM, CCK, DQPSK, DBPSK
Wireless Medium 2.4 GHz I SM: Orthogonal Frequency Division Mult iplexing (OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n Data
Rat es
300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,
60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
I EEE 802.11g Data
Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b Data 11, 5.5, 2, 1 Mbps
Rat es
W iFi Ge ner a l
Operat ing Syst em s Microsoft Windows* XP ( 32 and 64 bit ) and Windows Vist a* ( 32 and 64 bit ) , Ubunt u
Linux*
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11n, WPA- Personal, WPA- Enterprise,
WPA2- Personal, WPA2-Ent erprise, WMM, WPS
Cisco Com patible
Extensions cert ificat ion
Cisco Com patible Ext ensions, v4.0
WLAN St andard I EEE 802.11g, 802.11b, 802.11n, 802.11d, 802.11e, 802.11i,
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2- Personal, WPA- Enterprise, WPA2- Ent erprise, 802.1X: EAP- SI M,
LEAP, PEAP, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Encrypt ion AES- CCMP 128- bit, WEP 128- bit and 64 - bit , CKI P, TKI P
Product Safet y UL, C- UL, CB ( I EC 60590)
I nt el® Centrino® W ireless- N 2 2 0 0 a nd I nt e l® Centrino® W ireless- N
2230
Form Factor PCI Express* Half-Mini Card
Dim ensions Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna I nterface
Connector
Hirose U.FL- R- SMT m at es wit h cable connector U.FL- LP- 066
Ant enna Diversit y On - board diversit y
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% to 95% non -condensing ( at tem peratures of 25 º C to 35 º C)
W iFi
Frequency
Modulat ion
2.4 GHz ( 802.11b/ g/ n)
Frequency band 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless Medium 2.4 GHz I SM: Orthogonal Frequency Division Mult iplexing (OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n Data
Rat es
MI MO Configurat ion: 2X2
Tx / Rx : 300, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45,
43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
I EEE 802.11g Data
Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b Data
Rat es
11, 5.5, 2, 1 Mbps
Bluetoot h Support I ntel® Cent rino® Wireless- N 2200: None
I nt el® Centrino® Wireless- N 2230: Bluet ooth 4.0 ( Bluet oot h Low - Energy and
Bluetoot h 3.0 + HS)
Gene ral
Operat ing Syst em s Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11n, WPA- Personal, WPA- Enterprise, WPA2-
Personal, WPA2-Ent erprise, WMM, WPS
Cisco Com patible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
I EEE Feat ure Sets I EEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11d, 802.11h
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2- Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP
128- bit and 64 - bit; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS,
EAP- AKA
Product Safet y UL, C- UL, CB ( I EC 60590)
I nt el® Centrino® W ireless- N 1 0 3 0 a nd I nt e l® Centrino® Advance d- N
6230
Form Factor PCI Express* Half-Mini Card
Dim ensions Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna
I nt erface
Connector
Hirose U.FL- R- SMT m at es wit h cable connector U.FL- LP- 066
Ant enna
Diversit y
On - board diversit y
Net work
St andards
802.11a/ b/ g/ n ( varies by adapt er) and Bluet ooth 3.0 + HS
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% t o 95% non - condensing ( at tem perat ures of 25 º C to 35 º C)
WiFi Network
St andards
I nt el® Centrino® Wireless- N 1030: 802.11b/ g/ n
I nt el® Centrino® Advanced - N 6230: 802.11a/ g/ n
Fr eque ncy
M od ula t ion
5 GHz ( 8 0 2 .1 1 a/ n) 2 .4 GH z ( 8 0 2 .1 1 b/ g/ n )
Frequency band 5.15 GHz - 5.85 GHz ( dependent on count ry) 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless
Medium
5 GHz UNI I : Ort hogonal Frequency Division
Multiplexing ( OFDM)
2.4 GHz I SM: Orthogonal Frequency Division
Multiplexing ( OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n
Dat a Rat es
I nt el® Centrino® Advanced - N 6230:
Tx/ Rx ( Mbps) : 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
I nt el® Centrino® Wireless- N 1030:
Rx ( Mbps) : 300, 270, 243, 240, 180
Rx/ Tx ( Mbps) : 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3,
30, 28.9, 21.7, 15, 14.4, 7.2
I EEE 802.11a
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11g
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b
Dat a Rat es
11, 5.5, 2, 1 Mbps
Bluetoot h Bluetoot h Version 3.0 + HS
Gene ral
Operat ing
Syst em s
Microsoft Windows* XP ( 32 -bit and 64 - bit)
Windows Vist a* ( 32 - bit and 64 - bit )
Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA- Personal, WPA-
Ent erprise, WPA2- Personal, WPA2- Ent erprise, WPS, WMM, WMM Power Save, EAP- SI M, LEAP,
PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA, P2P
Cisco
Com pat ible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
WLAN St andard I EEE 802.11g, 802.11b, 802.11a, 802.11n
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2- Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP 128-
bit and 64 - bit ; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Product Safet y UL, C- UL, CB ( I EC 60590)
I nt el® Centrino® Advanced- N 6 2 3 5
Form Factor PCI Express* Half-Mini Card
Dim ensions Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna
I nt erface
Connector
Hirose U.FL- R- SMT m at es wit h cable connector U.FL- LP- 066
Ant enna
Diversit y
On - board diversit y
Net work
St andards
802.11a/ b/ g/ n and Bluet oot h 4.0
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% t o 95% non - condensing ( at tem perat ures of 25 º C to 35 º C)
Fr eque ncy
M od ula t ion
5 GHz ( 8 0 2 .1 1 a/ n) 2 .4 GH z ( 8 0 2 .1 1 b/ g/ n )
Frequency band 5.15 GHz - 5.85 GHz ( dependent on count ry) 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless 5 GHz UNI I : Ort hogonal Frequency Division 2.4 GHz I SM: Ort hogonal Frequency Division
Medium Mult iplexing (OFDM) Multiplexing ( OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n
Dat a Rat es
Tx/ Rx ( Mbps) : 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117,
115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2
I EEE 802.11a
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11g
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b
Dat a Rat es
11, 5.5, 2, 1 Mbps
Bluetoot h Bluetoot h Version 4.0 ( 3.0 + HS )
Gene ral
Operat ing
Syst em s
Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA- Personal, WPA-
Ent erprise, WPA2- Personal, WPA2- Ent erprise, WPS, WMM, WMM Power Save, EAP- SI M, LEAP,
PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA, P2P
Cisco
Com pat ible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
WLAN St andard I EEE 802.11g, 802.11b, 802.11a, 802.11n
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2- Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP 128-
bit and 64 - bit ; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Product Safet y UL, C- UL, CB ( I EC 60590)
I nt el® Centrino® Advanced- N + W iMAX 6 2 5 0 and I nt el® Centrino®
W irele ss- N + W iM AX 6 1 5 0
Form Factor PCI Express* Half-Mini Card
Dim ensions Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna
I nt erface
Connector
Hirose U.FL- R- SMT m at es wit h cable connect or U.FL- LP- 066
Ant enna
Diversit y
On - board diversit y
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% t o 95% non -condensing ( at t em perat ures of 25 º C t o 35 º C)
W iFi
Frequency
Modulat ion
I nt el® Centrino® Advanced - N + WiMAX 6250
2.4 GHz ( 802.11b/ g/ n) , 5 GHz ( 802.11a/ n)
I nt el® Centrino® Wireless- N + WiMAX 6150
2.4 GHz ( 802.11b/ g/ n)
Frequency band 5.15 GHz - 5.85 GHz ( dependent on count ry) 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless
Medium
5 GHz UNI I : Ort hogonal Frequency Division
Multiplexing ( OFDM)
2.4 GHz I SM: Orthogonal Frequency Division
Multiplexing ( OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n
Dat a Rat es
I n t el® Ce ntrino® W ireless- N + W iM AX 6 1 5 0
MI MO Configurat ion: 1X2
Rx : 300, 270, 243, 240, 180 Mbps
Rx/ Tx : 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30,
28.9, 21.7, 15, 14.4, 7.2 Mbps
I n t el® Ce ntrino® Advance d- N + W iMAX 6 2 5 0
MI MO Configurat ion: 2X2
Tx / Rx : 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,
60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
I EEE 802.11a
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11g
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b
Dat a Rat es
11, 5.5, 2, 1 Mbps
Gene ral
Operat ing
Syst em s
Microsoft Windows* XP ( 32 -bit and 64 - bit)
Windows Vist a* ( 32 - bit and 64 - bit )
Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA- Personal, WPA-
Ent erprise, WPA2- Personal, WPA2- Ent erprise, WMM, WMM Power Save, EAP- SI M, LEAP, PEAP,
TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Cisco
Com pat ible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
I EEE Feat ure
Sets
I n t el® Ce ntrino® W ireless- N + W iM AX 6 1 5 0 :
I EEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d
I n t el® Ce ntrino® Advance d- N + W iMAX 6 2 5 0 :
802.11a, I EEE 802.11b, 802.11g, 802.11n, 802.11e, 802.11i, 802.11h, 802.11d
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2-Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP 128-
bit and 64 - bit ; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Product Safet y UL, C- UL, CB (I EC 60590)
W iM AX
Gene ral
Operat ing
Syst em s
Microsoft Windows* XP ( 32 -bit and 64 - bit)
Windows Vist a* ( 32 - bit and 64 - bit )
Windows* 7 ( 32 - bit and 64 - bit)
St andard
Com pliance
802.16e- 2005 Corrigenda 2 ( D4)
WiMAX Syst em
Profile Feature
set
I n t el® Ce ntrino® W ireless- N + W iM AX 6 1 5 0 :
Mobile WiMAX release 1, Wave I I . Support s 3A and 1A/ B profiles
I n t el® Ce ntrino® Advance d- N + W iMAX 6 2 5 0 :
Mobile WiMAX release 1, Wave I I . Support s 3A, 5A/ C, 1A/ B, and 5BL profiles
Securit y Key Managem ent Prot ocol ( PKMv2)
Encrypt ion 128- bit CCMP (Counter - Mode/ CBC- MAC) based on AES encryption
W iM AX
Frequency band I nt el® Cent rino® Wireless- N + WiMAX 6150: 2.3 -2.4 GHz / 2.496- 2.690 GHz
I nt el® Centrino® Advanced - N + WiMAX 6250: 2.3 - 2.4 GHz / 2.496- 2.690 GHz / 3.4 -3.8 GHz
Modulat ion UL - QPSK, 16 QAM
DL - QPSK, 16 QAM, 64 QAM
Wireless
Medium
Duplex m ode: TDD operat ions Scalable OFDMA ( SOFDMA): 512 and 1024 FFT
sub -carrier perm utat ion: PUSC I nt el® Centrino® Wireless- N + WiMAX 6150:
Channel bandwidths: 5 and 10 MHz
I nt el® Centrino® Advanced - N + WiMAX 6250:
Channel bandwidths: 5, 7, 8.75 and 10 MHz
WiMAX Network
Release Feature
set
SPWG/ NWG Release 1.5
Rat e
Perform ance
I nt el® Centrino® Wireless- N + WiMAX 6150:
Up t o 10 Mbps DL and 4 Mbps UL @ peak rat e
(OTA perform ance, 10MHz channel)
I nt el® Centrino® Advanced - N + WiMAX 6250:
Up t o 20 Mbps DL and 6 Mbps UL @ peak rat e
(OTA perform ance, 10MHz channel)
RF Transm itter
Output Power
Com pliance wit h Power class 2
I nt el® Centrino® Advanced- N 6 2 0 0 , I nt el® Centrino® Advance d- N
6 2 0 5 a nd I nt e l® Centrino® Ult im a t e - N 6 3 0 0
Form Factor I nt el® Centrino® Advanced - N 6200, I nt el® Centrino® Ult im ate-N 6300:
PCI Express* Full- Mini Card and Half- Mini Card.
I nt el® Centrino® Advanced - N 6205: PCI Express* Half- Mini Card.
Dim ensions Full- Mini Card: Width 2.00 in x Length 1.18 in x Height 0.18 in ( 50.95 m m x 30 m m x 4.5 m m )
Half- Mini Card: Widt h 1.049 in x Length 1.18 in x Height 0.18 in ( 26.64 m m x 30 m m x 4.5
m m )
Ant enna
I nt erface
Connector
Hirose U.FL- R- SMT m at es wit h cable connect or U.FL- LP- 066
Ant enna
Diversit y
On - board diversit y
Connector
I nt erface
52- pin Mini Card edge connector
Volt age 3.3 V
Operat ing
Tem perat ure
0 t o + 80 degrees Celsius
Hum idity 50% t o 95% non -condensing ( at t em perat ures of 25 º C t o 35 º C)
Fr eque ncy 5 GHz ( 8 0 2 .1 1 a/ n) 2 .4 GH z ( 8 0 2 .1 1 b/ g/ n )
M od ula t ion
Frequency band 5.15 GHz - 5.85 GHz ( dependent on count ry) 2.400 - 2.4835 GHz ( dependent on count ry)
Modulat ion BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK
Wireless
Medium
5 GHz UNI I : Ort hogonal Frequency Division
Multiplexing ( OFDM)
2.4 GHz I SM: Orthogonal Frequency Division
Multiplexing ( OFDM)
Channels All channels as defined by t he relevant specificat ion and country rules.
I EEE 802.11n
Dat a Rat es
I nt el® Centrino® Ultim ate-N 6300:
Tx/ Rx: 450, 405, 360, 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120,
117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
I nt el® Centrino® Advanced - N 6200, I nt el® Centrino® Advanced - N 6205:
Tx/ Rx: 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65,
60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps
I EEE 802.11a
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11g
Dat a Rat es
54, 48, 36, 24, 18, 12, 9, 6 Mbps
I EEE 802.11b
Dat a Rat es
11, 5.5, 2, 1 Mbps
Gene ral
Operat ing
Syst em s
Microsoft Windows* XP ( 32 -bit and 64 - bit)
Windows Vist a* ( 32 - bit and 64 - bit )
Windows* 7 ( 32 - bit and 64 - bit)
Wi- Fi Alliance*
cert ificat ion
Wi- Fi* certificat ion for 802.11b, 802.11g, 802.11a, 802.11h, 802.11d, WPA- Personal, WPA-
Ent erprise, WPA2- Personal, WPA2- Ent erprise, WMM, WMM Power Save, EAP- SI M, LEAP, PEAP,
TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Cisco
Com pat ible
Extensions
cert ificat ion
Cisco Com patible Ext ensions, v4.0
WLAN St andard I EEE 802.11g, 802.11b, 802.11a, 802.11n
Archit ect ure I nfrast ruct ure or ad hoc ( peer - t o -peer) operat ing m odes
Securit y WPA- Personal, WPA2-Personal, WPA- Enterprise, WPA2- Ent erprise, AES- CCMP 128- bit, WEP 128-
bit and 64 - bit ; 802.1X: EAP- SI M, LEAP, PEAP, TKI P, EAP- FAST, EAP- TLS, EAP- TTLS, EAP- AKA
Product Safet y UL, C- UL, CB (I EC 60590)
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
I m port ant I nfor m ation
Safet y I nform at ion
Third Party Software Not ices
Safe t y I nform at ion
I t is im port ant t hat you read the safety inform at ion regarding your WiFi adapt er. Please see t he Use r 's Guide for
safet y and regulatory not ices.
Thir d Part y Soft w a r e N ot ices
Portions of I nt el® PROSet / Wireless WiFi Connect ion Ut ilit y include software under t he following t erm s:
OpenSSL License
Copyright ( c) 1998 - 2006 The OpenSSL Proj ect . All rights reserved.
Redist ribution and use in source and binary form s, with or wit hout m odification, are perm it t ed provided t hat t he
following condit ions are m et :
1. Redistribut ions of source code m ust ret ain t he above copyright not ice, t his list of condit ions and t he
following disclaim er.
2. Redistribut ions in binary form m ust reproduce t he above copyright not ice, t his list of condit ions and t he
following disclaim er in the docum entat ion and/ or ot her m at erials provided wit h the dist ribut ion.
3. All advert ising m aterials m entioning feat ures or use of t his soft ware m ust display the following
acknowledgm ent: "This product includes software developed by t he OpenSSL Proj ect for use in t he OpenSSL
Toolkit . ( ht tp: / / www.openssl.org/ ) "
4. The nam es "OpenSSL Toolkit " and "OpenSSL Proj ect" m ust not be used t o endorse or prom ot e product s
derived from t his software wit hout prior writ t en perm ission. For written perm ission, please contact openssl -
core@openssl.org.
5. Product s derived from t his software m ay not be called "OpenSSL" nor m ay "OpenSSL" appear in t heir nam es
wit hout prior writ t en perm ission of the OpenSSL Proj ect.
6. Redistribut ions of any form what soever m ust retain t he following acknowledgm ent : "This product includes
soft ware developed by the OpenSSL Proj ect for use in the OpenSSL Toolkit ( ht t p: / / www.openssl.org/ ) "
THI S SOFTWARE I S PROVI DED BY THE OpenSSL PROJECT " AS I S" AND ANY EXPRESSED OR I MPLI ED
WARRANTI ES, I NCLUDI NG, BUT NOT LI MI TED TO, THE I MPLI ED WARRANTI ES OF MERCHANTABI LI TY AND FI TNESS
FOR A PARTI CULAR PURPOSE ARE DI SCLAI MED. I N NO EVENT SHALL THE OpenSSL PROJECT OR I TS
CONTRI BUTORS BE LI ABLE FOR ANY DI RECT, I NDI RECT, I NCI DENTAL, SPECI AL, EXEMPLARY, OR CONSEQUENTI AL
DAMAGES ( I NCLUDI NG, BUT NOT LI MI TED TO, PROCUREMENT OF SUBSTI TUTE GOODS OR SERVI CES; LOSS OF
USE, DATA, OR PROFI TS; OR BUSI NESS I NTERRUPTI ON) HOWEVER CAUSED AND ON ANY THEORY OF LI ABI LI TY,
WHETHER I N CONTRACT, STRI CT LI ABI LI TY, OR TORT ( I NCLUDI NG NEGLI GENCE OR OTHERWI SE) ARI SI NG I N
ANY WAY OUT OF THE USE OF THI S SOFTWARE, EVEN I F ADVI SED OF THE POSSI BI LI TY OF SUCH DAMAGE.
This product includes crypt ographic soft ware writ t en by Eric Young ( eay@crypt soft.com ) . This product includes
soft ware written by Tim Hudson ( tj h@crypt soft.com ).
Origina l SSLe ay License
Copyright ( C) 1995 - 1998 Eric Young (eay@cryptsoft .com )
All rights reserved.
This package is an SSL im plem ent ation written by Eric Young ( eay@crypt soft.com ) . The im plem ent at ion was
writ t en so as t o conform wit h Net scape's SSL.
This library is free for com m ercial and non - com m ercial use as long as the following conditions are adhered t o. The
following condit ions apply t o all code found in t his dist ribution, be it t he RC4, RSA, lhash, DES, et c., code; not j ust
the SSL code. The SSL docum entat ion included wit h this dist ribut ion is covered by t he sam e copyright term s
except t hat t he holder is Tim Hudson ( t j h@crypt soft .com ).
Copyright rem ains Eric Young's, and as such any Copyright not ices in t he code are not t o be rem oved. I f t his
package is used in a product , Eric Young should be given attribut ion as t he aut hor of the parts of t he library used.
This can be in t he form of a t ext ual m essage at program startup or in docum entat ion ( online or t ext ual) provided
wit h the package.
Redist ribution and use in source and binary form s, with or wit hout m odification, are perm it t ed provided t hat t he
following condit ions are m et :
1. Redistribut ions of source code m ust ret ain t he copyright notice, t his list of condit ions and t he following
disclaim er.
2. Redistribut ions in binary form m ust reproduce t he above copyright not ice, t his list of condit ions and t he
following disclaim er in the docum entat ion and/ or ot her m at erials provided wit h the dist ribut ion.
3. All advert ising m aterials m entioning feat ures or use of t his soft ware m ust display the following
acknowledgem ent : "This product includes crypt ographic soft ware written by Eric Young ( eay@crypt soft.com ) "
The word 'crypt ographic' can be left out if t he rout ines from t he library being used are not crypt ographic
relat ed.
4. I f you include any Windows specific code ( or a derivat ive t hereof) from t he apps directory ( applicat ion code)
you m ust include an acknowledgem ent: "This product includes software writ t en by Tim Hudson
( tj h@crypt soft .com ) "
THI S SOFTWARE I S PROVI DED BY ERI C YOUNG "AS I S: ' AND ANY EXPRESS OR I MPLI ED WARRANTI ES,
I NCLUDI NG, BUT NOT LI MI TED TO, THE I MPLI ED WARRANTI ES OF MERCHANTABI LI TY AND FI TNESS FOR A
PARTI CULAR PURPOSE ARE DI SCLAI MED. I N NO EVENT SHALL THE AUTHOR OR CONTRI BUTORS BE LI ABLE FOR
ANY DI RECT, I NDI RECT, I NCI DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTI AL DAMAGES ( I NCLUDI NG, BUT
NOT LI MI TED TO, PROCUREMENT OF SUBSTI TUTE GOODS OR SERVI CES; LOSS OF USE, DATA, OR PROFI TS; OR
BUSI NESS I NTERRUPTI ON) HOWEVER CAUSED AND ON ANY THEORY OF LI ABI LI TY, WHETHER I N CONTRACT,
STRI CT LI ABI LI TY, OR TORT ( I NCLUDI NG NEGLI GENCE OR OTHERWI SE) ARI SI NG I N ANY WAY OUT OF THE USE
OF THI S SOFTWARE, EVEN I F ADVI SED OF THE POSSI BI LI TY OF SUCH DAMAGE.
The license and dist ribution t erm s for any publicly available version or derivat ive of t his code cannot be changed.
i.e. t his code cannot sim ply be copied and put under another dist ribution license [ including t he GNU Public
License.]
zlib.h - - inte rface of t he 'zlib' gene ral purpose com pression libra ry, ve rsion 1 .2 .3 , July
1 8 t h, 2 0 0 5
Copyright ( C) 1995 - 2005 Jean- loup Gailly and Mark Adler
This soft ware is provided 'as- is', wit hout any express or im plied warrant y. I n no event will the aut hors be held
liable for any dam ages arising from t he use of t his soft ware. Perm ission is grant ed t o anyone t o use this soft ware
for any purpose, including com m ercial applicat ions, and t o alter it and redist ribute it freely, subj ect t o t he
following restrict ions:
1. The origin of t his software m ust not be m isrepresented; you m ust not claim that you wrote t he original
soft ware. I f you use this soft ware in a product , an acknowledgm ent in t he product docum ent ation would be
appreciat ed but is not required.
2. Alt ered source versions m ust be plainly m arked as such, and m ust not be m isrepresent ed as being t he
original soft ware.
3. This not ice m ay not be rem oved or alt ered from any source distribut ion.
Jean - loup Gailly jloup@gzip.org
Mark Adler m adler@alum ni.calt ech.edu
Adapt er Dr iver
Portions of the driver include soft ware under t he following t erm s:
W PA Supplicant
Copyright ( c) 2003 - 2007, Jouni Malinen < jkm aline@cc.hut .fi> and contribut ors. All rights reserved.
Redist ribution and use in source and binary form s, with or wit hout m odification, are perm it t ed provided t hat t he
following condit ions are m et :
Redist ributions of source code m ust retain the above copyright notice, this list of conditions and the
following disclaim er.
Redist ributions in binary form m ust reproduce the above copyright not ice, t his list of condit ions and t he
following disclaim er in the docum entat ion and/ or ot her m at erials provided wit h the dist ribut ion.
Neit her t he nam e of Jouni Malinen nor t he nam es of it s contribut ors m ay be used t o endorse or prom ote
product s derived from t his soft ware wit hout specific prior written perm ission.
THI S SOFTWARE I S PROVI DED BY THE COPYRI GHT HOLDERS AND CONTRI BUTORS "AS I S" AND ANY EXPRESS OR
I MPLI ED WARRANTI ES, I NCLUDI NG, BUT NOT LI MI TED TO, THE I MPLI ED WARRANTI ES OF MERCHANTABI LI TY AND
FI TNESS FOR A PARTI CULAR PURPOSE ARE DI SCLAI MED. I N NO EVENT SHALL THE COPYRI GHT OWNER OR
CONTRI BUTORS BE LI ABLE FOR ANY DI RECT, I NDI RECT, I NCI DENTAL, SPECI AL, EXEMPLARY, OR CONSEQUENTI AL
DAMAGES ( I NCLUDI NG, BUT NOT LI MI TED TO, PROCUREMENT OF SUBSTI TUTE GOODS OR SERVI CES; LOSS OF
USE, DATA, OR PROFI TS; OR BUSI NESS I NTERRUPTI ON) HOWEVER CAUSED AND ON ANY THEORY OF LI ABI LI TY,
WHETHER I N CONTRACT, STRI CT LI ABI LI TY, OR TORT ( I NCLUDI NG NEGLI GENCE OR OTHERWI SE) ARI SI NG I N
ANY WAY OUT OF THE USE OF THI S SOFTWARE, EVEN I F ADVI SED OF THE POSSI BI LI TY OF SUCH DAMAGE.
__________
Copyright ( c) 2001, Dr Brian Gladm an < brg@gladm an.m e.uk> , Worcest er, UK.
All rights reserved.
LI CENSE TERMS
The free dist ribution and use of t his soft ware in both source and binary form is allowed ( wit h or wit hout changes)
provided t hat:
1. Dist ributions of t his source code include t he above copyright notice, this list of condit ions and t he following
disclaim er;
2. dist ribut ions in binary form include t he above copyright notice, t his list of condit ions and t he following
disclaim er in t he docum ent ation and/ or ot her associat ed m at erials;
3. the copyright holder's nam e is not used to endorse products built using t his software wit hout specific writ t en
perm ission.
DI SCLAI MER
This soft ware is provided 'as is' wit h no explicit or im plied warrant ies in respect of its properties, including, but not
lim ited t o, correctness and fitness for purpose.
I ssue Date: 29/ 07/ 2002
This file cont ains t he definit ions required t o use AES ( Rij ndael) in C.
Portions Licensed from Devicescape Soft w a re, I nc.
I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y cont ains software licensed from Devicescape Software, I nc.
Copyright ( c) 2004 - 2008 Devicescape Soft ware, I nc. All rights reserved.
"Odd But t on" Artist ic License
Portions of this soft ware contain the standard version of " Odd Button" licensed under t he Artist ic License. The
source code for "Odd Button" m ay be found online at http: / / sourceforge.net / proj ects/ oddbutton.
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
Cust om e r Suppor t
I nt el support is available online or by telephone. Available services include the m ost up - to- dat e product
inform ation, inst allat ion instructions about specific product s, and t roubleshoot ing t ips.
Online Suppor t
Te chnical Su ppor t : ht t p: / / www.int el.com / support
N etw ork Pr oduct Su ppor t : ht t p: / / www.int el.com / net work
Cor por at e W e b Sit e : ht t p: / / www.int el.com
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
W a rra nt y
Product W a rrant y I nform a t ion
One- Ye a r Lim it ed H a rdw are W arr a nt y
Lim it ed W arr a nt y
I n this warrant y st at em ent, t he t erm "Product" applies t o t he wireless adapt ers listed in Specificat ions.
I nt el warrant s t o t he purchaser of t he Product t hat t he Product , if properly used and inst alled, will be free from
defects in m aterial and workm anship and will subst ant ially conform t o I nt els publicly available specificat ions for
the Product for a period of one ( 1) year beginning on the dat e t he Product was purchased in it s original sealed
packaging.
SOFTWARE OF ANY KI ND DELI VERED WI TH OR AS PART OF THE PRODUCT I S EXPRESSLY PROVI DED "AS I S",
SPECI FI CALLY EXCLUDI NG ALL OTHER WARRANTI ES, EXPRESS, I MPLI ED ( I NCLUDI NG WI THOUT LI MI TATI ON,
WARRANTI ES OF MERCHANTABI LI TY, NON- I NFRI NGEMENT OR FI TNESS FOR A PARTICULAR PURPOSE), provided
however, that I nt el warrant s t hat t he m edia on which t he soft ware is furnished will be free from defect s for a
period of ninet y ( 90) days from t he dat e of delivery. I f such a defect appears wit hin the warrant y period, you m ay
return t he defective m edia to I nt el for replacem ent or alt ernat ive delivery of t he soft ware at I ntel's discret ion and
wit hout charge. I nt el does not warrant or assum e responsibilit y for t he accuracy or com plet eness of any
inform ation, t ext , graphics, links or other item s cont ained within t he software.
I f the Product which is t he subject of this Lim it ed Warrant y fails during t he warrant y period for reasons covered by
this Lim it ed Warrant y, I nt el, at its opt ion, will:
REPAI R t he Product by m eans of hardware and/ or soft ware; OR
REPLACE the Product wit h anot her product , OR, if I nt el is unable t o repair or replace t he Product ,
REFUN D the t hen -current I nt el price for the Product at the t im e a claim for warrant y service is m ade to
I nt el under this Lim it ed Warrant y.
THI S LI MI TED WARRANTY, AND ANY I MPLI ED WARRANTI ES THAT MAY EXI ST UNDER APPLI CABLE STATE,
NATI ONAL, PROVI NCI AL OR LOCAL LAW, APPLY ONLY TO YOU AS THE ORIGI NAL PURCHASER OF THE PRODUCT.
Ex t e nt of Lim it ed W ar rant y
I nt el does not warrant t hat the Product, whether purchased stand - alone or int egrat ed wit h other product s,
including wit hout lim it ation, sem i- conduct or com ponents, will be free from design defect s or errors known as
"errat a." Current characterized errat a are available upon request . Further, t his Lim it ed Warranty does NOT cover:
(i) any cost s associat ed wit h the replacem ent or repair of the Product, including labor, inst allation or ot her costs
incurred by you, and in particular, any cost s relating t o t he rem oval or replacem ent of any Product soldered or
ot herwise perm anent ly affixed t o any print ed circuit board or integrat ed wit h other product s; (ii) dam age t o t he
Product due to ext ernal causes, including accident, problem s wit h elect rical power, abnorm al, m echanical or
environm ent al condit ions, usage not in accordance wit h product instruct ions, m isuse, neglect , accident , abuse,
alt erat ion, repair, im proper or unauthorized installat ion or im proper test ing, or ( iii) any Product which has been
m odified or operat ed out side of I ntels publicly available specificat ions or where t he original product identificat ion
m arkings ( t radem ark or serial num ber) have been rem oved, altered or oblit erated from t he Product ; or ( iv) issues
result ing from m odification ( ot her t han by I nt el) of soft ware product s provided or included in t he Product, ( v)
incorporat ion of soft ware product s, ot her than those software product s provided or included in t he Product by
I nt el, or ( vi) failure t o apply I nt el - supplied m odificat ions or corrections t o any soft ware provided wit h or included
in the Product .
How t o Obtain W arra nty Service
To obt ain warrant y service for t he Product, you m ay cont act your original place of purchase in accordance wit h its
inst ruct ions or you m ay cont act I nt el. To request warrant y service from I nt el, you m ust cont act t he I ntel Custom er
Support ( "I CS") cent er in your region ( ht tp: / / www.int el.com / support / wireless/ ) wit hin t he warrant y period during
norm al business hours ( local t im e) , excluding holidays and ret urn t he Product t o t he designat ed I CS cent er. Please
be prepared to provide: (1) your nam e, m ailing address, em ail address, t elephone num bers and, in t he USA, valid
credit card inform ation; ( 2) proof of purchase; ( 3) m odel nam e and product ident ificat ion num ber found on t he
Product ; and ( 4) an explanat ion of the problem . The Cust om er Service Representat ive m ay need addit ional
inform ation from you depending on t he nature of t he problem . Upon I CS's verificat ion t hat t he Product is eligible
for warrant y service, you will be issued a Ret urn Mat erial Aut horizat ion ( "RMA") num ber and provided wit h
inst ruct ions for returning t he Product t o t he designat ed I CS cent er. When you return t he Product to the I CS
center, you m ust include t he RMA num ber on t he out side of the package. I nt el will not accept any ret urned
Product wit hout an RMA num ber, or t hat has an invalid RMA num ber, on t he package. You m ust deliver t he
returned Product t o t he designat ed I CS cent er in the original or equivalent packaging, wit h shipping charges pre-
paid ( wit hin t he USA) , and assum e the risk of dam age or loss during shipm ent . I nt el m ay elect to repair or
replace t he Product wit h eit her a new or recondit ioned Product or com ponent s, as I nt el deem s appropriate. The
repaired or replaced product will be shipped t o you at the expense of I ntel wit hin a reasonable period of t im e aft er
receipt of t he ret urned Product by I CS. The ret urned Product shall becom e I nt els property on receipt by I CS. The
replacem ent product is warrant ed under t his writ t en warrant y and is subj ect t o t he sam e lim itat ions of liabilit y and
exclusions for ninet y ( 90) days or t he rem ainder of the original warrant y period, whichever is longer. I f I nt el
replaces t he Product, the Lim it ed Warranty period for t he replacem ent Product is not ext ended.
W ARRAN TY LI M I TATI ON S AN D EXCLUSI ON S
THI S WARRANTY REPLACES ALL OTHER WARRANTI ES FOR THE PRODUCT AND I NTEL DI SCLAI MS ALL OTHER
WARRANTI ES, EXPRESS OR I MPLI ED I NCLUDI NG, WI THOUT LI MI TATI ON, THE I MPLI ED WARRANTI ES OF
MERCHANTABI LI TY, FITNESS FOR A PARTI CULAR PURPOSE, NON- I NFRI NGEMENT, COURSE OF DEALI NG AND
USAGE OF TRADE. Som e st a t e s ( or j u risdict ion s) do not a llow t he e x clusion of im plie d w arra nties so t his
lim it at ion m ay not apply t o you. ALL EXPRESS AND I MPLI ED WARRANTI ES ARE LI MI TED I N DURATI ON TO THE
LI MI TED WARRANTY PERI OD. NO WARRANTI ES APPLY AFTER THAT PERI OD. Som e st a t e s ( or j urisdict ions) do
not a llow lim it a t ions on how long a n im plie d w arr a nty la st s, so t his lim it a t ion m a y not a pply t o you.
LI M I TATI ON S OF LI ABI LI TY
I NTEL’S RESPONSI BI LI TY UNDER THI S OR ANY OTHER WARRANTY, I MPLI ED OR EXPRESS, I S LI MI TED TO REPAI R,
REPLACEMENT OR REFUND, AS SET FORTH ABOVE. THESE REMEDI ES ARE THE SOLE AND EXCLUSI VE REMEDI ES
FOR ANY BREACH OF WARRANTY. TO THE MAXI MUM EXTENT PERMI TTED BY LAW, I NTEL I S NOT RESPONSI BLE
FOR ANY DI RECT, SPECI AL, I NCI DENTAL, OR CONSEQUENTI AL DAMAGES RESULTI NG FROM ANY BREACH OF
WARRANTY OR UNDER ANY OTHER LEGAL THEORY ( I NCLUDI NG WI THOUT LI MI TATI ON, LOST PROFI TS,
DOWNTI ME, LOSS OF GOODWI LL, DAMAGE TO OR REPLACEMENT OF EQUI PMENT AND PROPERTY, AND ANY
COSTS OF RECOVERI NG, REPROGRAMMI NG, OR REPRODUCI NG ANY PROGRAM OR DATA STORED I N OR USED
WI TH A SYSTEM CONTAI NI NG THE PRODUCT), EVEN I F I NTEL HAS BEEN ADVI SED OF THE POSSI BI LI TY OF SUCH
DAMAGES. Som e st a t e s ( or j u risdict ion s) do n ot allow t he e x clu sion or lim it at ion of incide ntal or
conseque ntia l da m a ge s, so t he a bove lim it at ions or e xclusions m ay not a pply t o you. THI S LI MI TED
WARRANTY GI VES YOU SPECI FIC LEGAL RI GHTS, AND YOU MAY ALSO HAVE OTHER RI GHTS THAT VARY BY STATE
OR JURI SDI CTI ON. ANY AND ALL DI SPUTES ARISI NG UNDER OR RELATED TO THI S LI MI TED WARRANTY SHALL BE
ADJUDI CATED I N THE FOLLOWI NG FORUMS AND GOVERNED BY THE FOLLOWI NG LAWS: FOR THE UNI TED STATES
OF AMERI CA, CANADA, NORTH AMERI CA AND SOUTH AMERI CA, THE FORUM SHALL BE SANTA CLARA,
CALI FORNI A, USA AND THE APPLI CABLE LAW SHALL BE THAT OF THE STATE OF DELAWARE. FOR THE ASI A
PACI FI C REGI ON ( EXCEPT FOR MAI NLAND CHI NA) , THE FORUM SHALL BE SI NGAPORE AND THE APPLI CABLE LAW
SHALL BE THAT OF SI NGAPORE. FOR EUROPE AND THE REST OF THE WORLD, THE FORUM SHALL BE LONDON
AND THE APPLI CABLE LAW SHALL BE THAT OF ENGLAND AND WALES I N THE EVENT OF ANY CONFLICT BETWEEN
THE ENGLI SH LANGUAGE VERSI ON AND ANY OTHER TRANSLATED VERSI ON( S)OF THI S LI MI TED WARRANTY
(WI TH THE EXCEPTI ON OF THE SI MPLI FI ED CHI NESE VERSI ON) , THE ENGLI SH LANGUAGE VERSI ON SHALL
CONTROL.
I M PORTAN T! UNLESS OTHERWI SE AGREED I N WRI TI NG BY I NTEL, THE I NTEL PRODUCTS SOLD HEREUNDER ARE
NOT DESI GNED, OR I NTENDED FOR USE I N ANY MEDI CAL, LI FE SAVI NG OR LI FE SUSTAI NI NG SYSTEMS,
TRANSPORTATI ON SYSTEMS, NUCLEAR SYSTEMS, OR FOR ANY OTHER MI SSI ON CRI TI CAL APPLI CATI ON I N WHI CH
THE FAI LURE OF THE I NTEL PRODUCT COULD CREATE A SI TUATI ON WHERE PERSONAL I NJURY OR DEATH MAY
OCCUR.
W EEE
Back t o Top
Back t o Content s
Trademarks and Disclaimers
Back t o Content s
Glossary of Term s
Te r m De fin it ion
802.11 The 802.11 st andard refers t o a fam ily of specificat ions developed by the I EEE for wireless LAN
technology. The 802.11 specifies an over-the - air int erface bet ween a wireless client and a base
st at ion or bet ween t wo wireless clients and provides 1 or 2 Mbps t ransm ission in t he 2.4 GHz
band using eit her frequency hopping spread spect rum (FHSS) or direct sequence spread
spect rum ( DSSS) .
802.11a The 802.11a standard specifies a m axim um dat a t ransfer rat e of 54 Mbps and an operat ing
frequency of 5 GHz. The 802.11a st andard uses the Orthogonal Frequency Division Mult iplexing
(OFDM) transm ission m ethod. Additionally, t he 802.11a st andard supports 802.11 features such
as WEP encryption for securit y.
802.11b 802.11b is an ext ension t o 802.11 that applies to wireless net works and provides 11 Mbps
transm ission ( wit h a fallback to 5.5, 2 and 1 Mbps) in t he 2.4 GHz band. 802.11b uses only
DSSS. Throughput dat a rat e 5+ Mbps in t he 2.4 GHz band.
802.11g The 802.11g st andard specifies a m axim um dat a t ransfer rat e of 54 Mbps, an operat ing
frequency of 2.4GHz, and WEP encrypt ion for securit y. 802.11g net works are also referred t o as
Wi- Fi* net works.
802.11n A t ask group of t he I EEE 802.11 com m it t ee has defined a new draft specificat ion t hat provides
for increased t hroughput speeds of up to 540 Mbps. The specificat ion provides for Mult iple-
I nput - Multiple- Out put ( MI MO) technology, or using m ult iple receivers and m ult iple t ransm itters
in bot h t he client and access point , t o achieve im proved perform ance.
802.1X 802.1X is t he I EEE St andard for Port - Based Net work Access Control. This is used in conj unction
wit h EAP m et hods to provide access control t o wired and wireless net works.
AAA Server Aut hent ication, Aut horization and Accounting Server. A syst em t o control access t o com put er
resources and t rack user act ivit y.
Access Point
(AP)
A device t hat connects wireless devices t o another net work. For exam ple, a wireless LAN,
I nt ernet m odem or ot hers.
Ad Hoc
Net work
A com m unicat ion configurat ion in which every com puter has the sam e capabilit ies, and any
com put er can init iate a com m unicat ion session. Also known as a peer - t o - peer network, a device
to device net work or a com put er - t o -com put er net work.
AES- CCMP Advanced Encrypt ion Standard - Counter CBC- MAC Prot ocol is t he new m et hod for privacy
prot ect ion of wireless transm issions specified in t he I EEE 802.11i standard. AES-CCMP provides
a st ronger encrypt ion m ethod than TKI P. The AES algorit hm is capable of using cryptographic
keys of 128, 192, and 256 bits t o encrypt and decrypt dat a in 128-bit blocks. AES- CCMP uses
the AES block cipher, but restrict s t he key lengt h to 128 bit s. AES- CCMP incorporat es t wo
sophist icated crypt ographic t echniques ( counter m ode and CBC- MAC) t o provide im proved
securit y bet ween t he m obile client and t he access point.
Aut hent ication Verifies the identity of a user logging onto a network. Passwords, digit al certificates, sm art cards
and biom et rics are used t o prove the identity of the client to the net work. Passwords and digital
cert ificat es are also used t o identify the net work t o t he client .
Available
net work
One of the net works list ed under Available networks on t he Wireless Net works tab of t he
Wireless Net work Connect ion Properties ( Windows* XP environm ent ) . Any wireless net work t hat
is broadcast ing and is wit hin receiving range of t he WiFi adapt er appears on t he list .
BER Bit Error Rat e. The rat io of errors to the t otal num ber of bit s being sent in a dat a transm ission
from one location to anot her.
Bit Rat e The t ot al num ber of bit s ( ones and zeros) per second that a net work connection can support .
Not e t hat this bit rat e will vary, under soft ware cont rol, wit h different signal pat h condit ions.
Broadcast SSI D Used t o allow an access point t o respond to clients on a wireless net work by sending probes.
BSSI D A unique ident ifier for each wireless client on a wireless net work. The Basic Service Set
I dent ifier ( BSSI D) is t he Ethernet MAC address of each adapt er on t he net work.
CA ( Cert ificate
Aut horit y)
A corporat e certificat ion aut horit y im plem ent ed on a server. I n addition, I nt ernet Explorer's
cert ificat e can im port a cert ificat e from a file. A t rust ed CA cert ificat e is st ored in t he root store.
CCX ( Cisco
Com pat ible
eXtension)
Cisco Com patible Ext ensions Program ensures t hat devices used on Cisco wireless LAN
infrastruct ure m eet t he securit y, m anagem ent and roam ing requirem ents.
Certificat e Used for client aut hent ication. A cert ificat e is registered on t he aut hent ication server ( for
exam ple, RADI US server) and used by t he authent icat or.
CKI P Cisco Key I nt egrit y Prot ocol ( CKI P) is a Cisco propriet ary securit y prot ocol for encrypt ion in
802.11 m edia. CKI P uses a key m essage int egrit y check and m essage sequence num ber t o
im prove 802.11 securit y in infrast ruct ure m ode. CKI P is Cisco's version of TKI P.
Client com put er The com puter t hat gets it s I nt ernet connection by sharing eit her t he host com puter's connect ion
or t he access point 's connection.
DSSS Direct Sequence Spread Spect rum . Technology used in radio t ransm ission. I ncom pat ible wit h
FHSS.
EAP Short for Ext ensible Aut hent ication Prot ocol, EAP sit s inside of Point - t o - Point Prot ocol's ( PPP)
aut hent ication prot ocol and provides a generalized fram ework for several different aut hent icat ion
m et hods. EAP is supposed to head off proprietary authenticat ion syst em s and let everyt hing
from passwords t o challenge- response t okens and public- key infrastruct ure certificat es all work
sm oot hly.
EAP- AKA EAP- AKA ( Ext ensible Aut hent ication Prot ocol Method for UMTS Aut hent icat ion and Key
Agreem ent ) is an EAP m echanism for authenticat ion and session key distribut ion, using t he
Universal Mobile Telecom m unications Syst em ( UMTS) Subscriber I dent ity Module ( USI M) . The
USI M card is a special sm art card used with cellular networks t o validat e a given user with t he
net work.
EAP- FAST EAP- FAST, like EAP- TTLS and PEAP, uses t unneling t o prot ect t raffic. The m ain difference is t hat
EAP- FAST does not use cert ificat es t o aut henticat e.
Provisioning in EAP- FAST is negot iated solely by t he client as t he first com m unication exchange
when EAP- FAST is requested from t he server. I f t he client does not have a pre- shared secret
Prot ect ed Access Credent ial ( PAC), it can request t o init iate a provisioning EAP- FAST exchange
to dynam ically obt ain one from t he server.
EAP- FAST docum ent s t wo m et hods t o deliver t he PAC: m anual delivery t hrough an out - of - band
secure m echanism , and autom at ic provisioning.
Manual delivery m echanism s can be any delivery m echanism t hat t he adm inist rat or of t he
net work feels is sufficiently secure for t heir net work.
Aut om at ic provisioning est ablishes an encrypted t unnel t o prot ect the authenticat ion of
the client and the delivery of the PAC t o t he client . This m echanism , while not as secure
as a m anual m et hod m ay be, is m ore secure t han t he authenticat ion m ethod used in
LEAP.
The EAP- FAST m ethod can be divided into two parts: provisioning, and authenticat ion. The
provisioning phase involves t he init ial delivery of the PAC to the client . This phase only needs t o
be perform ed once per client and user.
EAP- GTC The EAP- GTC ( Generic Token Card) is sim ilar t o t he EAP- OTP except wit h hardware t oken cards.
The request cont ains a displayable m essage, and t he response cont ains the string read from t he
hardware t oken card.
EAP- OTP EAP-OTP ( One - Tim e Password) is sim ilar t o MD5, except it uses t he OTP as t he response. The
request contains a displayable m essage. The OTP m ethod is defined in RFC 2289.
EAP- SI M Ext ensible Aut hent ication Prot ocol- Subscriber I dent it y Module ( EAP- SI M) aut henticat ion can be
used with:
Net work Aut hent icat ion t ypes: Open, Shared, and WPA* -Ent erprise, WPA2* - Enterprise.
Dat a Encryption t ypes: None, WEP and CKI P.
A SI M card is a special sm art card t hat is used by Global Syst em for Mobile Com m unications
(GSM) based digit al cellular net works. The SI M card is used t o validat e your credentials wit h the
net work
EAP- TLS A type of aut hent ication m et hod that uses EAP and a securit y prot ocol called t he Transport
Layer Securit y ( TLS) . EAP- TLS uses certificates t hat use passwords. EAP- TLS authent icat ion
supports dynam ic WEP key m anagem ent.
EAP- TTLS A t ype of aut hent ication m et hod that uses EAP and Tunneled Transport Layer Securit y ( TTLS) .
EAP- TTLS uses a com bination of certificat es and another securit y m et hod such as passwords.
Encrypt ion Scram bling dat a so t hat only t he aut horized recipient can read it. Usually a key is needed t o
int erpret the dat a.
FHSS Frequency -Hop Spread Spect rum . Technology used in radio t ransm ission. I ncom pat ible wit h
DSSS.
File and print er
sharing
A capabilit y t hat allows a num ber of people t o view, m odify, and print t he sam e file( s) from
different com puters.
Fragm ent at ion
threshold
The t hreshold at which t he wireless adapt er breaks the packet int o m ult iple fram es. This
determ ines t he packet size and affects t he t hroughput of t he transm ission.
GHz
(Gigahertz)
A unit of frequency equal t o 1,000,000,000 cycles per second.
Host com puter The com puter t hat is direct ly connected t o the I nt ernet via a m odem or network adapt er.
I nfrast ruct ure
net work
A wireless net work cent ered around an access point . I n this environm ent, t he access point not
only provides com m unicat ion wit h the wired net work, but also m ediat es wireless net work traffic
in the im m ediate neighborhood.
I EEE I nst it ute of Elect rical and Electronics Engineers (I EEE) is an organizat ion involved in defining
com put ing and com m unicat ions standards.
I nt ernet
Prot ocol (I P)
address
The address of a com puter t hat is at t ached to a net work. Part of the address designat es which
net work t he com puter is on, and t he ot her part represent s t he host identification.
LAN ( Local Area
Net work)
A high -speed, low -error dat a net work covering a relat ively sm all geographic area.
LEAP (Light
Extensible
Aut hent ication
Prot ocol)
A version of Ext ensible Authenticat ion Prot ocol ( EAP). LEAP is a propriet ary extensible
aut hent ication prot ocol developed by Cisco that provides a challenge- response authenticat ion
m echanism and dynam ic key assignm ent .
MAC ( Media
Access Cont rol)
Address
A hardwired address applied at t he factory. I t uniquely ident ifies net work hardware, such as a
wireless adapter, on a LAN or WAN.
Mbps
( Megabit s- per -
second)
Transm ission speed of 1,000,000 bit s per second.
MHz
(Megahertz)
A unit of frequency equal t o 1,000,000 cycles per second.
MI C (Michael) Message I nt egrit y Check ( com m only called Michael).
MS- CHAP An EAP m echanism used by t he client . Microsoft Challenge Aut henticat ion Prot ocol ( MS- CHAP)
Version 2, is used over an encrypt ed channel t o enable server validat ion. The challenge and
response packets are sent over a non - exposed TLS encrypt ed channel.
ns( Nanosecond) 1 billiont h ( 1/ 1,000,000,000) of a second.
OFDM Ort hogonal Frequency Division Mult iplexing.
Open
aut hent ication
Allows any device network access. I f encrypt ion is not enabled on t he network, any device t hat
knows t he Service Set I dent ifier ( SSI D) of t he access point can gain access t o t he network.
PEAP Prot ect ed Ext ensible Aut hent icat ion Prot ocol ( PEAP) is an I nternet Engineering Task Force ( I ETF)
draft prot ocol sponsored by Microsoft, Cisco, and RSA Security. PEAP creates an encrypt ed
tunnel sim ilar t o t he t unnel used in secure web pages ( SSL). I nside t he encrypted t unnel, a
num ber of ot her EAP authenticat ion m et hods can be used t o perform client aut hent icat ion. PEAP
requires a TLS cert ificat e on t he RADI US server, but unlike EAP- TLS there is no requirem ent t o
have a certificat e on t he client. PEAP has not been rat ified by t he I ETF. The I ETF is current ly
com paring PEAP and TTLS ( Tunneled TLS) t o determ ine an aut henticat ion st andard for 802.1X
aut hent ication in 802.11 wireless syst em s. PEAP is an aut hent ication t ype designed to take
advantage of server - side EAP- Transport Layer Securit y ( EAP- TLS) and t o support various
aut hent ication m ethods, including user passwords and one- t im e passwords, and Generic Token
Cards.
Peer - to - Peer
m ode
A wireless net work structure t hat allows wireless clients to com m unicat e direct ly wit h each ot her
wit hout using an access point.
Power save
m ode
The stat e in which t he radio is periodically powered down t o conserve power. When t he port able
com put er is in Power Save m ode, received packets are st ored in t he access point unt il t he
wireless adapter wakes up.
Preferred
net work
One of the net works that has been configured. Such networks are list ed under Preferred
net works on the Wireless Networks tab of the Wireless Net work Connect ion Properties
(Windows* XP environm ent).
RADI US
( Rem ot e
Aut hent ication
Dial- I n User
Service)
RADI US is an authent icat ion and accounting syst em t hat verifies user's credentials and grants
access to request ed resources.
RF ( Radio
Frequency)
The internat ional unit for m easuring frequency is Hertz ( Hz) , which is equivalent t o t he older
unit of cycles per second. One MegaHert z ( MHz) is one m illion Hertz. One GigaHert z ( GHz) is
one billion Hert z. For reference: t he st andard US elect rical power frequency is 60 Hz, t he AM
broadcast radio frequency band is 0.55 - 1.6 MHz, the FM broadcast radio frequency band is 88 -
108 MHz, and m icrowave ovens t ypically operat e at 2.45 GHz.
Roam ing Movem ent of a wireless node bet ween t wo m icro cells. Roam ing usually occurs in infrastructure
net works built around m ult iple access points. Current wireless network roam ing is only
supported in t he sam e subnet of a net work.
RTS t hreshold The num ber of fram es in t he data packet at or above which an RTS/ CTS (request t o send/ clear
to send) handshake is turned on before the packet is sent. The default value is 2347.
Shared key An encryption key known only t o t he receiver and sender of data. This is also referred t o as a
pre- shared key.
SI M
(Subscriber
I dent it y
Module)
A SI M card is used t o validat e credentials wit h the net work. A SI M card is a special sm art card
used by GSM- based digit al cellular net works.
Silent m ode Silent Mode Access Points or Wireless Rout ers have been configured t o not broadcast t he SSI D
for t he wireless net work. This m akes it necessary t o know t he SSI D in order to configure the
wireless profile t o connect t o the access point or wireless rout er.
Single Sign On Single Sign On feat ure set allows t he 802.1X credent ials t o m at ch your Windows log on user
nam e and password credentials for wireless net work connections.
SSI D ( Service
Set I dent ifier)
SSI D or network nam e is a value t hat cont rols access to a wireless net work. The SSI D for your
wireless network card m ust m atch t he SSI D for any access point t hat you want to connect wit h.
I f the value does not m at ch, you are not grant ed access to the net work. Each SSI D m ay be up
to 32 alphanum eric charact ers long and is case-sensitive.
st ealt h A st ealt h access point is one t hat has the capabilit y and is configured t o not broadcast its SSI D.
This is the WiFi net work nam e t hat appears when a DMU ( Device Managem ent Ut ility, such as
I nt el® PROSet/ Wireless WiFi Connect ion Ut ilit y) scans for available wireless net works. Although
this can enhance wireless network securit y, it is com m only considered a weak security feature.
To connect t o a st ealt h access point , a user m ust specifically know t he SSI D and configure t heir
DMU accordingly. The feat ure is not a part of the 802.11 specificat ion, and is known by differing
nam es by various vendors: closed m ode, privat e network, SSI D broadcasting.
TKI P ( Tem poral
Key I nt egrit y
Tem poral Key I nt egrity prot ocol im proves data encryption. Wi- Fi Prot ect ed Access* uses it s
TKI P. TKI P provides im portant dat a encrypt ion enhancem ent s including a re- keying m et hod.
Prot ocol) TKI P is part of the I EEE 802.11i encrypt ion st andard for wireless networks. TKI P is t he next
generat ion of WEP, t he Wired Equivalency Prot ocol, which is used t o secure 802.11 wireless
net works. TKI P provides per packet key m ixing, a m essage integrit y check and a re- keying
m echanism , t hus fixing t he flaws of WEP.
TLS (Transport
Layer Securit y)
A t ype of aut hent ication m et hod using the Ext ensible Aut hent ication Prot ocol ( EAP) and a
securit y prot ocol called t he Transport Layer Security ( TLS) . EAP- TLS uses cert ificat es which use
passwords. EAP- TLS authenticat ion supports dynam ic WEP key m anagem ent. The TLS prot ocol is
int ended t o secure and authenticat e com m unicat ions across a public network through dat a
encryption. The TLS Handshake Prot ocol allows t he server and client to provide m ut ual
aut hent ication and t o negot iate an encrypt ion algorit hm and cryptographic keys before data is
t ransm it ted.
TTLS ( Tunneled
Transport Layer
Securit y)
These set tings define t he prot ocol and t he credentials used to aut hent icate a user. I n TTLS, t he
client uses EAP- TLS t o validat e t he server and creat e a TLS-encrypted channel between t he
client and server. The client can use another authenticat ion prot ocol. Typically password- based
prot ocols challenge over t his encrypted channel to enable server validat ion. The challenge and
response packets are sent over a non - exposed TLS encrypt ed channel. TTLS im plem ent ations
today support all m et hods defined by EAP, as well as several older m et hods ( CHAP, PAP, MS-
CHAP and MS- CHAP-V2) . TTLS can easily be ext ended to work wit h new prot ocols by defining
new attribut es to support new prot ocols.
WEP ( Wired
Equivalent
Privacy)
Wired Equivalent Privacy, 64- and 128-bit ( 64 - bit is som et im es referred t o as 40 - bit) . This is a
low -level encrypt ion t echnique designed to give the user about t he sam e am ount of privacy t hat
he would expect from a LAN. WEP is a securit y prot ocol for wireless local area networks
(WLANs) defined in t he 802.11b st andard. WEP is designed t o provide t he sam e level of securit y
as t hat of a wired LAN. WEP aim s t o provide securit y by dat a over radio waves so that it is
prot ect ed as it is t ransm it t ed from one end point t o anot her.
WEP Key Either a pass phrase or hexadecim al key.
The pass phrase m ust be 5 ASCI I charact ers for 64 - bit WEP or 13 ASCI I charact ers for 128-bit
WEP. For pass phrases, 0 - 9, a- z, A- Z, and ~ ! @# $% ^ &* () _+ | ` - = { } | [ ] \ : "; '< > ?,./ are all valid
charact ers.
The hex key m ust be 10 hexadecim al characters ( 0 - 9, A- F) for 64 - bit WEP or 26 hexadecim al
charact ers ( 0 - 9, A- F) for 128- bit WEP.
Wi - Fi*
(Wireless
Fidelit y)
I s m eant t o be used generically when referring of any t ype t o 802.11 net work, whether
802.11b, 802.11a, or dual- band.
WiMAX WiMAX, t he Worldwide I nt eroperability for Microwave Access, is a telecom m unicat ions
technology aim ed at providing wireless data over long dist ances in a variet y of ways, from point -
to - point links t o full m obile cellular type access. I t is based on t he I EEE 802.16 standard. The
nam e WiMAX was created by the WiMAX Forum , which was form ed in June 2001 t o prom ote
conform ance and int eroperability of the st andard. The forum describes WiMAX as "a st andards-
based t echnology enabling t he delivery of last m ile wireless broadband access as an alt ernative
to cable and DSL."
Wireless rout er A st and - alone wireless hub t hat allows any com puter t hat has a wireless net work adapt er t o
com m unicate wit h anot her com put er wit hin t he sam e net work and t o connect to the I nt ernet.
WLAN (Wireless
Local - Area
Net work)
A t ype of local- area network that uses high - frequency radio waves rat her t han wires t o
com m unicate bet ween nodes.
WPA* ( Wi- Fi
Prot ect ed
Access)
This is a securit y enhancem ent t hat st rongly increases t he level of data prot ect ion and access
cont rol t o a wireless net work. WPA is an int erim st andard that will be replaced wit h t he I EEE's
802.11i standard upon it s com plet ion. WPA consists of RC4 and TKI P and provides support for
BSS ( I nfrast ruct ure) m ode only. WPA and WPA2 are com patible.
WPA2* ( Wi- Fi
Prot ect ed
Access 2)
This is the second generation of WPA t hat com plies wit h the I EEE TGi specification. WPA2
consists of AES encrypt ion, pre-aut hent ication and PMKI D caching. I t provides support for BSS
(I nfrastructure) m ode and I BSS ( ad hoc) m ode. WPA and WPA2 are com patible.
WPA- Ent erprise Wi- Fi Prot ect ed Access- Ent erprise applies t o corporate users. A new standards- based,
int eroperable securit y t echnology for wireless LAN ( subset of I EEE 802.11i draft st andard) that
encrypts data sent over radio waves. WPA is a Wi- Fi st andard t hat was designed t o im prove
upon the securit y feat ures of WEP as follows:
I m proved dat a encrypt ion t hrough the tem poral key int egrity prot ocol ( TKI P). TKI P uses a
hashing algorit hm t o scram ble t he encrypt ion keys and adds an int egrit y - checking feat ure
to ensure t hat the keys have not been t am pered with.
User aut henticat ion, which is generally m issing in WEP, t hrough the extensible
aut hent ication prot ocol ( EAP) . WEP regulat es access t o a wireless net work based on a
com put er's hardware- specific MAC address, which is relatively sim ple t o be sniffed out and
st olen. EAP is built on a m ore secure public- key encryption syst em t o ensure that only
aut horized net work users can access t he network.
WPA is an int erim st andard that will be replaced wit h t he I EEE's 802.11i standard upon its
com plet ion.
WPA- Personal Wi- Fi Prot ect ed Access- Personal provides a level of securit y in t he sm all network or hom e
environm ent .
WPA- PSK (Wi -
Fi Prot ected-
Access Pre-
Shared Key)
WPA- PSK m ode does not use an aut hent ication server. I t can be used wit h the dat a encrypt ion
types WEP or TKI P. WPA- PSK requires configurat ion of a pre- shared key ( PSK). You m ust ent er
a pass phrase or 64 hex charact ers for a pre- shared key of lengt h 256- bit s. The data encryption
key is derived from t he PSK.
Back t o Top
Back t o Content s
Trademarks and Disclaimers

Navigation menu