Intel 8260D2 Intel Dual Band Wireless-AC 8260 User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3068641
Application ID	6Q0etJe3Q/nGhmP5WZv/Lg==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	454.71kB (5683816 bits)
Date Submitted	2016-07-19 00:00:00
Date Available	2017-01-15 00:00:00
Creation Date	2016-07-12 20:23:30
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2016-07-19 09:48:26
Document Title	Users Manual 2
Document Creator	Adobe InDesign CS5.5 (7.5.3)

Basics
Select Internet Protocol Version 4 (TCP/IPv4) from the
list below This connection uses the following items →
Properties.
Configure the IP settings.
• When using DHCP, select Obtain an IP address
automatically.
• The Network Component name may differ depending on
the operating system.
• When not using DHCP, contact the network administrator
for the IP address. To use a static IP address, select Use the
following IP address and set the IP address manually.
• To add a network item such as a client, service, or protocol,
select Install... under the list of network items.
38
Select OK to save the settings.
Basics
• When connected to a 100 Mbps/1 Gbps wired LAN, a
message appears informing the user of connection to
a 10 Mbps/100 Mbps wired LAN when the computer
wakes from sleep mode. This happens because
restoring the network takes about 3 seconds. When the
network is restored, the computer will be connected to
the 100 Mbps/1 Gbps LAN.
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
On the desktop, right-click the Start button ( ) and select
Control Panel → Network and Internet → Network and
Sharing Center → Change adapter settings.
• When the system is running on battery power, it may
take a few seconds for the connection to be established
when connecting a LAN cable. This is the result of
power saving features designed to reduce battery
consumption.
Right-click Ethernet and select Properties.
Select Configure... → Power Management → Allow this
device to wake the computer → OK.
• When the system is running on battery power, the
speed of a wired LAN is decreased automatically
to reduce battery consumption. In this case, a
1 Gbps/100 Mbps LAN would function at the speed of a
100 Mbps/10 Mbps connection.
Restart the computer.
• If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
• This feature may not work while using other power saving
features. To disable other sleep functions, right-click the
Start button ( ) and select Control Panel → Hardware
and Sound → Power Options.
39
Basics
Wireless LAN
Connecting to a Wi-Fi network
Connect the computer to a wireless network to use the Internet.
The descriptions below are for computer models with
a Wireless LAN card or device. A Wireless LAN device is
optional. The pictures in this manual may differ from the
actual product depending on the wireless LAN device
model.
On the taskbar, select
AP List
About Access Point (AP)
An Access Point (AP) is a network device that bridges wired
and wireless LANs and corresponds to a wireless hub in a wired
network. Multiple devices can be connected to an AP.
40
Basics
Deactivating the Wi-Fi feature
Select a network from the list of detected wireless networks
and select Connect automatically → Connect.
When you are not using the Wi-Fi feature, turn it off to save battery
power.
Select
on the taskbar.
Select the connected network name to turn it off. The Wi-Fi
feature is deactivated.
Enter a password, if necessary, and select Next.
Once the computer has been connected to a wireless
network, it will attempt to connect to it automatically when
it is available. If you require a network password, contact the
system administrator.
Airplane mode
This disables all wireless functions on your computer. You can use
only non-network services.
To activate Airplane mode, on the taskbar, select
mode.
41
→ Airplane
Basics
Using the security slot (For 15.6
inch models)
You can secure the computer by connecting a lock and cable to
the security slot.
Tie the lock and cable to a fixed object and install the other end of
the cable to the security slot.
To use this feature, you must purchase a lock and cable
(sold separately). Your product may differ from the one
shown above. For more information, refer to your lock’s
manual.
42
Applications
Using applications
• Images and features may differ depending on the
model and the application version.
• Some applications may not be supported depending
on the model.
• Applications that are provided by Samsung can be
installed from Samsung Update.
• Third-party software related services
For descriptions about and service requests for
third-party applications, please contact the relevant
manufacturer. Some troubleshooting actions in
response to service requests may not work depending
on the application manufacturer.
43
Applications
Samsung Settings
Menu
Description
Samsung Settings, a Samsung-integrated settings application,
offers various settings functions.
Quick Settings
• Set quick settings.
Convenience
• Set system settings.
Power Management
• Set power-related settings.
Network
• Set network functions and settings.
Display
• Set the screen brightness and color.
Audio
• Set sound settings.
Input
• Set input functions and settings.
Privacy Protection
• Set security functions and settings.
My Log-in
• Set personal log-in settings.
Images and features may differ depending on the model
and the application version.
Select the Start button (
Samsung Settings.
) → All apps → Samsung →
Select an option to configure the corresponding function.
44
Applications
Samsung Update
Select Install & Update.
Select items to update and select OK.
Install and update Samsung applications and drivers on the
computer easily and conveniently. This application enables the
user to search for or download the BIOS, drivers, and applications
over the Internet. Keep the computer performing better and more
stably with Samsung Update.
• To check for available updates, the computer must be
connected to the Internet.
• Only applications that have been installed with this
application can be updated.
• Images and features may differ depending on the
model and the application version.
Select the Start button (
Samsung Update.
) → All apps → Samsung →
Read and agree to the User Agreement.
This step appears only when the application runs for the first
time.
45
Applications
Samsung PC Help (Self-help
application)
Installing Samsung PC Help
Use Samsung PC Help to access help-related content for
Samsung computers from a smartphone.
Watch the Samsung PC Help videos to become familiar with new
functions or to find solutions to problems.
On a smartphone, tap Play Store and search for Samsung PC
Help.
Tap INSTALL → ACCEPT to complete the setup.
Using Samsung PC Help
For more information, visit www.samsungpchelp.com.
On a smartphone, tap Samsung PC Help.
On the Samsung PC Help main screen, select a menu to
display the available content.
You may incur additional charges when you access
content.
46
Settings & Upgrade
Controlling brightness using the taskbar
On the taskbar, select
brightness.
→
. You can adjust the level of
LCD brightness
Adjust the LCD brightness to reduce eye strain and save power.
Controlling brightness using the keyboard
• The LCD screen is automatically set to the brightest
level when the AC adapter is connected. The LCD screen
automatically becomes dimmer when the AC adapter is
disconnected.
• To dim the LCD screen, press and hold the Fn key and press
the F2 key.
• The computer has an automatic screen brightness
adjustment to extend the battery usage time. When
necessary, the screen brightness is gradually adjusted.
• To brighten the LCD screen, press and hold the Fn key and
press the F3 key.
47
Settings & Upgrade
Changing display mode
• Auto mode: Optimizes the screen automatically for the
currently running program.
Select the optimal screen settings based on your activity.
Some options may not be available depending on the
model.
Select the Start button (
Samsung Settings.
Select Display → Display Color, and then select an option.
• Dynamic: Makes scenes more vivid and clear.
• Standard: Appropriate for normal environments and
convenient for most situations.
) → All apps → Samsung →
• Photo Editing: Appropriate for viewing photos.
• Reading: Appropriate for reading documents.
48
Settings & Upgrade
Volume
• To mute or unmute the volume, press and hold the Fn key and
press the F6 key.
Adjust the system volume or sound volume when playing music
or video.
Controlling volume using the keyboard
• To turn down the volume, press and hold the Fn key and press
the F7 key.
Controlling volume using the taskbar
Select
on the taskbar.
Drag the adjustment bar to the desired volume.
• To turn up the volume, press and hold the Fn key and press
the F8 key.
Volume adjustment bar
49
Settings & Upgrade
BIOS (Setup utility)
Entering the BIOS screen
Define a boot password, change the boot priority, or configure the
installed chipsets.
• Incorrect settings may cause the system to malfunction
or crash.
Turn on the computer.
Before the Samsung logo appears, press the F2 key several
times.
• The BIOS setup screens, menus, and items may appear
differently depending on the model and BIOS version.
• If the computer is password-protected, press the F2 key
several times before the password screen appears.
• BIOS setup functions are subject to upgrades.
• If the password screen or the Windows start screen
appears, restart the computer and try again.
50
Settings & Upgrade
The BIOS screen
Number
Name
The BIOS setup screen appears as shown below.
• Setup items
You can change BIOS settings using the keyboard or mouse.
• Setup tools
– – Help: View the help for BIOS set up.
– – Default: Return to the default settings.
– – Restore: Cancel changes.
– – Save: Save settings.
– – Exit: Exit BIOS setup.
• Help
• Setup menu
– – SysInfo: View the basic specifications of
the computer.
– – Advanced: Configure the chipsets and
additional functions.
– – Security: Configure security functions.
– – Boot: Configure peripherals and bootrelated settings.
The BIOS setup screen appears only in English.
51
Settings & Upgrade
Boot password
Setting passwords
Setting a password with the BIOS enhances protection against
viruses and hacking attacks.
There are three password settings available: Supervisor Password,
User Password, and HDD Password.
• Supervisor Password (low security level): This password is
required when turning on the computer or entering the BIOS
setup.
• Do not forget your password or expose it to others.
• If you forget the Supervisor Password or HDD
Password, request assistance from the Samsung
Service Center. In this case, a service fee will be charged.
• User Password (low security level): This password is required
to enter the BIOS setup. This password will be deactivated
automatically if the Supervisor Password is disabled.
• If you forget the User Password, disable the Supervisor
Password, and the User Password is also automatically
disabled.
• HDD Password (high security level): This password is required
to access the hard disk drive (HDD) from another computer.
This password may not be supported, depending on the
model.
52
Settings & Upgrade
Setting a boot password
Turn on the computer.
Before the Samsung logo appears, press the F2 key several
times.
Enter a password and select Ok.
The password can be up to 20 characters.
Enter the password again to confirm it and select Ok.
Select Save → Yes to save and restart.
• To enable the Password On Boot option, set a
Supervisor Password and enter the password when
starting up the computer.
Access the Security menu.
Select a password type (Supervisor Password, User
Password, or HDD Password).
• To change the HDD Password after setting it, restart
the computer.
If you cannot select an item or the HDD Password Frozen
message appears, turn off the computer and turn it on again.
Then, press the F2 key several times before the Samsung logo
appears to enter the BIOS setup screen.
• For some models, if the password entered message
appears in the Setup Notice window, select Ok to
complete the setup.
53
Settings & Upgrade
Removing a password
Boot priority
Change the boot priority from the BIOS setup.
Turn on the computer.
Before the Samsung logo appears, press the F2 key several
times.
Access the Security menu.
Select a password type (Supervisor Password, User
Password, or HDD Password).
Enter the current password and select Ok.
Without entering any characters, select Ok → Ok.
For some models, to cancel the password, select Cancel in
the Setup Notice window.
54
Turn on the computer.
Before the Samsung logo appears, press the F2 key several
times.
Access the Boot menu.
Select Boot Device Priority.
Select an option menu to open the list.
Select an option.
Select Save → Yes to save and restart.
Select Exit → Yes to restart without saving the changes.
Settings & Upgrade
Using the Battery Calibration Function
When charging/discharging the battery repeatedly for a short
time only, the battery usage time may be reduced by the
difference between the actual battery charge and the remaining
charge display.
In this case, the actual battery charge and the remaining charge
display will be the same by discharging the battery completely
using the Battery Calibration function, and then recharging it
again.
Touch Pad Mouse
USB Charge In Sleep Mode
On
Off
USB S3 Wake-up
BIOS Adaptive Brightness
Off
On
Smart Battery Calibration >
The screen images and terms may differ from the actual
product depending on the computer model and driver
version.
Select Advanced → Smart Battery Calibration.
Aptio Setup Utility - Copy (C) XXXX American Megatrends, Inc.
Disconnect the AC power adapter after turning off the
computer.
The Battery Calibration function is activated and the battery is
forcefully discharged. To stop the operation, press the Esc key.
This operation requires 3–5 hours depending on the battery
capacity and the remaining battery charge.
Turn the computer back on, and press the F2 key to enter the
Setup screen.
55
Settings & Upgrade
Battery
Charging the battery
Fully charge the battery using the AC adapter before using the
computer for the first time.
• Use only Samsung-approved AC adapters, batteries,
and cables. Unapproved adapters or cables can cause
the battery to explode or damage the computer.
Connect the power cable to the AC adapter.
Connect the AC adapter to the DC jack of the computer.
Plug the power cable into an electric socket.
• Incorrectly connecting the charger may cause serious
damage to the computer.
• This computer is equipped with an internal battery.
The battery is not user-serviceable or user-replaceable.
• To safely remove or replace the battery, take the device
to a Samsung Service Center. You will be charged for
this service.
• You can use the computer while it is charging, but
the battery charging time may increase. If the battery
temperature rises too much, the charging may stop as a
safety measure.
To restore the battery power after cutting it, connect the
AC adapter.
56
Settings & Upgrade
Battery status
When the battery is fully charged, the power LED turns green.
Disconnect the AC adapter from the computer.
Move the cursor over the battery icon on the taskbar to view the
current battery charge.
Viewing the current battery charge when the
computer is turned off
Connect or disconnect the AC adapter from the computer to view
the current battery charge when the computer is turned off.
10:00
2013/7/1
Power LED
Status
• Red: Charging
• Green: Fully charged
• Blue: Turned on
Unplug it from the electric socket.
57
Settings & Upgrade
Saving battery power
On the taskbar, select
When battery expiration is imminent
Batteries are consumable parts and the remaining battery life is
currently low. Continued use may result in charge or discharge
failures. Whether or not batteries can be used is determined
based on safety evaluations. Please replace it with a new battery
(genuine) to prevent data loss and ensure safe usage.
→ Battery saver.
Battery saver mode is activated.
Battery saver mode is disabled when the AC adapter is
connected.
When the battery has expired
Battery usage time
Batteries are consumable parts and the current battery cannot be
used as the battery life has expired. Please replace it with a new
battery (genuine) to prevent data loss and ensure safe usage.
Whether or not batteries can be used is determined based on
safety evaluations. To prevent data loss while replacing batteries,
please be sure to save your work first.
Batteries are replaceable items and over time the battery’s
capacity to hold a charge and its power level is reduced. If a
battery can only hold its charge for half of the time that it could
when new, it is recommended to purchase a new, replacement
battery.
Instruction messages related to battery life are displayed
properly when the Samsung Settings application is
installed on your computer. The messages may vary
depending on the model and software version.
Checking battery life instruction messages
When the battery has expired, an instruction message may appear
on the screen. To prevent the computer from losing data and to
use the computer safely, follow the on-screen instructions.
58
Troubleshooting
• The Samsung Recovery application may not be
provided in models with less than 64 GB of storage. If
you cannot access the Samsung Recovery application,
refer to Windows recovery function.
• Some functions may differ or may be unavailable
depending on the version. Refer to the application’s
help information.
Samsung Recovery
When a problem occurs with the computer, it is easy to restore
the computer back to the factory default settings by using the
Samsung Recovery application (Recovery/Backup). It is also
possible to restore the computer to a previously backed up point.
Back up important data regularly before a problem occurs with
the computer.
• Run the Samsung Recovery application with
administrator privileges.
• The Samsung Recovery application (Recovery/Backup)
is not available when using CD/DVD drives.
• Recovering the computer erases the data or
applications saved after a backup point. Therefore, back
up important data regularly before a problem occurs
with the computer.
• When you launch the application for the first time, read
and accept the Terms and Conditions when they display
on the screen.
59
Troubleshooting
Recovering to factory default
You can restore the computer to its factory default settings. If
necessary, back up important data to an external storage device
before restoring the system. See Backing up the current system.
When the computer starts Windows:
Select the Start button ( ) → All apps → Samsung →
Samsung Recovery.
When the computer does not start Windows:
Turn on the computer and press the F4 key several times
before the Samsung logo appears.
60
Select Backup Management → Factory image → Recover.
Troubleshooting
Backing up the current system
Select Recover.
Back up important data to an alternate internal drive or an
external storage device regularly to prevent data loss.
Follow the on-screen instructions to complete the recovery.
61
Select Backup Management → New backup.
Troubleshooting
Select a drive from the drive list → Backup.
• When backing up to an external storage device, connect
the device to the computer and then select the external
drive.
Recovering after a backup
Follow the on-screen instructions to complete the backup.
Select a backup point saved on an alternate internal drive or an
external storage device to recover the computer to that point.
62
When backing up to an external storage device, connect the
device to the computer.
Select the Start button (
Samsung Recovery.
) → All apps → Samsung →
Troubleshooting
Copying the drive (making a disk image)
Select Backup Management → a backup image → Recover.
To replace the drive, move the data to the new drive by making a
disk image. The new drive must be large enough to hold the data
from the current drive. Purchase an external hard drive connector
separately to connect the new drive to the computer.
Follow the on-screen instructions to complete data recovery.
63
Connect the new drive to the computer with an external hard
drive connector.
Select the Start button (
Samsung Recovery.
Select Disk copy.
) → All apps → Samsung →
Troubleshooting
Select a recovery point → Disk copy.
The data on the disk is copied to the new disk.
After the data is saved to another drive, open the cover at the
bottom of the computer and replace the existing drive with
the new one.
If the computer does not have a hard drive or memory cover,
contact the nearest Samsung Service Center for assistance.
You will be charged for this service.
64
Troubleshooting
Windows recovery function
Q&A
If the Samsung Recovery application is not supported by the
computer, reinstall Windows using the recovery function of
Windows.
When experiencing problems with the computer, try these
solutions.
Windows
Reinstalling Windows will erase all data saved on the
computer. Back up application and personal data to an
external storage device before reinstalling Windows.
Select the Start button (
→ Recovery.
How can I uninstall an application?
) → Settings → Update & security
Select Reset this PC → Get started.
Select Keep my files or Remove everything.
After the system is recovered, select the Start button ( )
→ All apps → Samsung → Samsung Update to install
the required Samsung applications.
65
On the desktop, right-click the Start button (
Control Panel → Uninstall a program.
) and select
On the list, right-click an application to delete, and then select
Uninstall.
Troubleshooting
Samsung Recovery
How can I start my computer in DOS?
To start the computer in DOS via a USB device:
What is a Recovery Area?
Turn on the computer.
The computer has an additional partition for restoring data or
saving backup files (only for models with the Samsung Recovery
application). This partition is called a Recovery Area and it
includes a recovery image comprised of the operating system and
applications.
Before the Samsung logo appears, press the F2 key several
times.
Select the Boot menu.
Set Fast BIOS Mode to Off.
Set Secure Boot Control to Off.
Set OS Mode Selection to CSM mode and then restart the
computer.
66
Troubleshooting
Why is the capacity representation of the hard disk
drive (HDD) in Windows different from the product
specifications?
What is a recovery image?
This refers to the operating system, drivers, and software that are
converted to a data image. It is required to recover the computer
and is embedded in the computer’s HDD. However, this is not
provided for storage devices where the capacity is less than 64 GB,
due to their small capacities.
The capacity of the storage device (HDD or SSD) of the
manufacturer is calculated assuming that 1 KB = 1,000 Bytes.
However, the operating system (Windows) calculates the storage
device capacity assuming that 1 KB = 1,024 Bytes, and therefore
the capacity representation of the HDD in Windows is smaller than
the actual capacity. The capacity representation in Windows may
be smaller than the actual capacity because some applications
occupy a certain area of the HDD outside of Windows.
How can I restore a computer that does not have the
Samsung Recovery application?
Restore the computer with the recovery function provided by
Windows. Refer to the Recover Functionality item in the help for
more details.
For models with the Samsung Recovery application, the HDD
capacity representation in Windows may be smaller than the
actual capacity because the Samsung Recovery application
uses a hidden area of 5–20 GB of the HDD to save the recovery
image, and that hidden area is not counted towards the total
size available to Windows. The size of the Samsung Recovery
application varies by model.
67
Troubleshooting
Miscellaneous
The camera and the microphone are not working.
How do I turn them on again?
When recording protect mode is activated, the camera and
microphone will not work.
To turn recording protect mode off, select the Start button ( )
→ All apps → Samsung → Samsung Settings → Privacy
Protection → Block Recording, and set the slide bar to Medium
or below.
The computer does not turn on automatically when
the LCD panel is opened.
To turn on the computer, the LCD panel should be opened greater
than a certain angle.
The angle may differ depending on the model.
If the computer LED does not turn on automatically, press the
Power button.
68
Appendix
• Optional components may not be provided or different
components may be provided depending on the
model.
• The system specifications are subject to change without
notice.
Product specifications
• The Storage device capacity of a computer in which
Samsung Recovery is installed, is smaller than the
product specification.
The system specifications may differ depending on the derived
model. For detailed system specifications, refer to the product
catalog.
Item
Operating
environment
AC/DC rating
PC rating
• For some models, SSDs and HDDs are not available
due to the computer’s design. Also, memory cannot be
added. To replace the memory or storage, contact the
Samsung Service Center.
Specification
• Temperature: - 5–40°C for storage,
10–35°C when operating
• The amount of memory that Windows can use may be
smaller than the actual amount of memory available.
• Humidity: 5 –90% for storage,
20–80% when operating
• Input: 100–240 VAC, 50–60 Hz
• Output: 1 9 VDC, 2.1 A,
19 VDC, 3.16 A
• 19 VDC, 2.1 A (40 W),
19 VDC, 3.16 A (60 W)
69
Appendix
Ergonomic tips
• Use an adjustable chair with firm, comfortable support.
• Adjust the height of your chair so that thighs are horizontal to
the floor and feet are flat on the floor.
Maintaining the proper posture during computer use is very
important to prevent physical injury. Improper or prolonged
keyboard use may result in repetitive strain injury. Viewing the
monitor screen for extended periods of time may result in eye
strain. Therefore, please follow these guidelines carefully when
setting up and using the computer.
• The back of the chair should support the lower back. Adjust
the backrest to fit your body properly.
• Sit back fully in your chair and straighten the back and neck.
Avoid leaning forward or craning your neck toward the
computer screen.
• Avoid using the computer while lying down or on your lap.
If the computer’s temperature increases, there is a danger of
burn injury.
Back and neck
• The instructions in this manual have been prepared
so that they can be applied to the range of needs of
general users. If the user is not included in the range,
the recommendations should be applied according to
the user’s needs.
• Images may differ from actual products.
70
Appendix
Arms and hands
• When using the keyboard and touchpad, the shoulders
should be relaxed. The upper arm and forearm should form an
angle that is slightly greater than a right angle, with the wrist
and hand in almost a straight line.
• Use a light touch when typing or using the touchpad and
keep the hands and fingers relaxed. Avoid rolling the thumbs
under your palms or supporting the wrists on the desk while
typing.
• Use an external keyboard and mouse when using the
computer for long periods. When using an external keyboard
and mouse, position the devices at the same height as the
computer and within comfortable reach.
71
Appendix
Eye position and display illumination
• Position the screen at least 50 cm away from your eyes.
• Adjust the height of the screen so that its top edge is equal to
or just below the level of your eyes.
• Avoid setting the screen’s brightness settings excessively high.
• Keep the screen clean.
cm
50
• If wearing glasses, clean them before using the computer.
• When referring to printed content while typing, use a static
paper holder to hold the paper at about the same height as
the monitor.
72
Appendix
Hearing and volume control
Operating conditions
• Take at least a 10 minute break every hour.
• Avoid using the computer in dark locations. Use the computer
with as much ambient light as you would when reading a
book.
• Indirect illumination is recommended. Use a curtain to
prevent reflections and glare on the screen.
VOLUME
• Ensure that volume is not too loud before using headphones.
• While operating a computer and talking on the phone, use a
headset. Using the computer while holding a phone on your
shoulder or with your neck may lead to muscle strain or injury.
• Avoid using headphones for long periods of time.
• Keep frequently used items within reach.
• Default audio settings can be changed by software and driver
updates without your knowledge. Always recheck equalizer
and volume settings before listening to audio.
• Only use the computer within the temperature and humidity
ranges specified in this manual.
Check your volume!
• To prevent possible hearing damage, do not listen at high
volume levels for long periods.
73
Appendix
Powering your device
• You must insert the power plug when the power indicator
light (LED) is lit green. If the plug is connected properly, the
power indicator light remains green.
Charging the battery on an airplane
Otherwise, the power indicator light turns off. In this case,
disconnect the plug, verify that the power indicator light is
green and then reconnect the power plug.
Power outlets may vary by airplane. Choose the connection
method that fits your circumstances.
The power plug and auto adapter figures may differ from
the actual products.
Power Indicator Light (LED)
Center Holes
Using an AC power plug
220 V Power Plug
Insert the power plug pins into the center of the power outlet.
110 V Power Plug
Good Example O
• If the pins are not inserted into the centers of the holes, they
will not be fully connected. In this case, reconnect the power
plug.
Wrong Example X
74
Appendix
Using an auto adapter
Using an airplane charging converter
When a 12 VDC power supply is available a cigarette lighter socket
will be provided. Use the optional auto adapter to use the 12 VDC
power supply.
Depending on the type of airplane you are traveling on, use the
auto adapter and charging converter. Insert the airplane power
input jack into the airplane’s power outlet.
Insert the cigarette lighter socket of the auto adapter into the
cigarette lighter socket.
Connect the DC plug of the auto adapter to the power input
port of the computer.
Connect the auto adapter’s DC plug to the computer.
Connect the airplane charging converter (optional) to the
auto adapter (optional).
Insert the airplane power input jack into the power outlet.
Cigar socket of the airplane
Power outlet of the airplane
Auto adapter
Auto adapter
Charging converter
Cigar plug
DC plug
DC plug
75
Cigar plug
DC jack
Appendix
Safety precautions
Warning
This safety information relates to computer use. Some of the
content may be not applicable to your computer. To prevent injury
or damage to your computer, read the safety information before
using it.
Failure to follow the instructions marked with this symbol may
result in physical injury or fatality.
Installation related
• Since this is commonly applied to Samsung Computers,
some pictures may differ from actual products.
Keep the computer at least 15 cm away from
any object.
• The term “product,” as used in this manual, refers to
basic components, such as the computer, battery,
adapter, and optional accessories provided by
Samsung.
15 cm
Failure to do so may cause computer
malfunction or damage, or physical injury.
Do not place or use the computer on slanted or
vibrating surfaces.
Failure to do so may result in computer
malfunction or damage.
To avoid suffocation, keep the plastic bag away
from infants and children.
Putting a plastic bag over the head may result in
suffocation.
NP v3.8
76
Appendix
Connect the power cord to the AC adapter
firmly.
Power related
The power plug and wall outlet figures may differ
depending on the country and the product model.
An improper connection may result in a fire.
Use only the provided AC adapter.
Handle the power cord with care.
Using a third-party adapter may cause the screen
to flicker.
• Do not touch with wet hands.
• Do not use a damaged or improperly
connected power cord.
Use only properly earthed electric sockets or
extension cords.
• Do not overload a multi-outlet or an
extension cord beyond the specified
voltage/current capacity.
Unearthed electric sockets or extension cords
may cause electric shock. Any connection to
unearthed electric sockets or extension cords
may produce an electric field from a current leak.
• Firmly insert the power cable into the AC
adapter.
• Do not unplug the power cord by pulling
on the cable.
• Unplug the wall-mount AC adapter
(integrated plug and power adapter) from
the wall outlet while holding the body and
pulling it in the direction of the arrow.
Failure to do so may result in electric shock
or fire.
77
Appendix
If water or other substances enters the
computer, the DC jack, or the AC adapter,
disconnect the power cable and contact
a Samsung Service Center. For notebook
computers that are supplied with an optional
removable battery, disconnect the battery.
Battery usage related
Keep the battery, AC adapter, and the power
cord away from infants, children, and pets.
Failure to do so may result in electric shock or
damage.
Failure to do so may result in electric shock or
fire.
Use only Samsung-approved batteries, AC
adapters, and accessories.
Do not let dust accumulate on the power cord
or the electric socket. Regularly clean the
power cord and the electric socket. Wipe the
power cord and the electric socket with a dry
cloth.
Batteries or AC adapters that are not approved
by Samsung may malfunction from a defective
safety device, resulting in an explosion or fire.
Take care not to allow metal objects such as a
key or clip to touch the battery terminal (metal
parts).
Failure to do so may result in electric shock or
fire.
This may cause excessive current and result in
fire, burns, or damage to the battery.
Do not bend or damage the power cable or
the AC adapter with a heavy or sharp-edged
object.
A damaged cable or cord may result in electric
shock or fire.
78
Appendix
If the computer or the computer battery leaks,
emits strange odors, or swells, immediately
stop using the computer and contact a
Samsung Service Center.
Usage related
Do not use the computer on heated floors or
electric pads, or on beds, blankets, or cushions
that block the ventilation of the computer.
Failure to do so may result in an explosion or fire.
In such environments, be careful not to block the
vent of the computer, which is normally at the
side or bottom of the computer. A blocked vent
causes the computer to overheat, resulting in an
explosion, fire, burns, or computer malfunction.
Replace a run-down battery with a new,
Samsung-approved battery.
When removing the real time clock (RTC)
battery, keep it away from infants and children.
Do not use the computer in humid locations,
such as a bathroom.
If a child swallows the battery, the child may
suffocate. If this happens, immediately contact a
doctor.
Failure to do so may result in computer
malfunction or electric shock. Use the computer
within the recommended temperature and
humidity range (10–35°C, 20–80% RH).
79
Appendix
Never heat the computer (or the battery) or
put the computer (or the battery) into a fire. Do
not put or use the computer (or the battery)
in a hot location, such as in a sauna or inside a
vehicle when the outside temperature is high.
If the computer is dropped or broken,
disconnect the power cord and contact
a Samsung Service Center. For notebook
computers that are supplied with an external
removable battery, disconnect the battery as
well.
There is a danger of an explosion or fire.
Using a broken computer may result in electric
shock or fire.
Before cleaning the computer, disconnect all
the cables that are connected to the computer.
For notebook computers that are supplied with
an optional removable battery, disconnect the
battery.
Do not touch the computer vents or the
connected AC adapter for extended periods
while the computer is on.
Contact with the vent or the connected AC
adapter for extended periods may result in lowtemperature burns, such as redness on the skin.
Failure to do so may result in electric shock or
fire.
Keep the computer away from water or liquid.
Water or liquid entering the computer may
short-circuit the computer, resulting in electric
shock or fire.
80
Appendix
Upgrade related
Storage and movement related
Do not store the computer in an enclosed
space, such as a computer bag, while it is
running.
Do not attempt to upgrade the computer,
unless you are qualified.
Otherwise, contact a Samsung Service Center or
an authorized technician.
Failure to do so may result in fire. Completely
shut down the computer before putting the
computer into an enclosed space.
Follow the specified instructions contained in
the manual for user maintenance.
When using wireless communication (LAN,
Bluetooth, etc.) always follow applicable
instructions. For example, airlines and
hospitals have strict requirements.
Do not disassemble any other parts by yourself.
Failure to do so may result in computer
malfunction, electric shock, or fire.
Do not disassemble the power supply
unit, the AC adapter, or the battery in any
circumstances.
Avoid exposing a drive to magnetic fields.
Security devices with magnetic fields include
airport walk-through devices and security
wands. The airport security devices that check
carry-on luggage, such as conveyor belts,
use X-rays instead of magnetism and will not
damage a drive.
Failure to do so may result in electric shock, fire,
or an explosion.
Shut down the computer and disconnect all
cables before disassembling the computer. If
the notebook has a removable battery, remove
the external battery.
Failure to do so, may cause electric shock.
81
Appendix
When carrying the notebook computer with
other items, such as the adapter, mouse, books
etc., take care not to press anything against the
notebook computer.
Caution
Failure to follow instructions marked with this symbol may result
in minor physical injury or damage to the computer.
If a heavy object is pressed against the notebook
computer, a white spot or stain may appear on
the LCD. Therefore, take care not to apply any
pressure to the notebook.
Installation related
Do not block the ports (holes), vents, etc. of the product and do
not insert objects.
In this case, place the notebook computer in
a separate compartment away from the other
objects.
Damage to a component within the computer may cause electric
shock or fire.
When using the computer on its side, ensure the vents are clear
and facing upwards.
Failure to do so, may cause the internal temperature of the
computer to rise and the computer to malfunction or halt.
82
Appendix
Do not place heavy objects on the product.
Only use a Samsung-authorized battery.
This may cause a problem with the computer. In addition, the
object may fall and cause injury or damage the computer.
Failure to do so may cause an explosion.
Keep the battery terminals away from metal objects such as car
keys or paper clips.
Connect the power cord to the nearest socket outlet when
charging the computer.
If metal objects touch the battery terminals, it may cause excessive
current and result in fire or damage to the battery.
If a problem occurs and disconnection from the socket outlet is
delayed, there is a danger of electric shock or fire.
Charge the battery according to the instructions in the manual.
Dispose of worn-out batteries properly.
Failure to do so may cause an explosion or fire.
• There is a danger of fire or explosion.
Do not heat the product (or battery) or expose it to heat (e.g.
inside a vehicle during the summer).
• The battery disposal method may differ depending on
your country and region. Dispose of the used battery in an
appropriate way.
There is a danger of explosion or fire.
Do not throw or disassemble the battery and do not put it into
water.
This may cause an injury, fire or explosion.
83
Appendix
Usage related
In case of lightning, immediately turn the system off, disconnect
the power cord from the wall outlet and phone line from
modem. Do not use the modem or phone.
Use the pen for its intended purpose only.
Using the pen for abnormal actions such as poking eyes or ears
may cause physical injury.
There is a danger of electric shock or fire.
Connect only permitted devices to the connectors or ports of
the computer.
Do not place a candle, light cigar, etc. over or on the product.
There is a danger of fire.
Failure to do so, may cause electric shock and fire.
Make sure to have the product tested by a safety service
engineer after repairing the product.
Close the LCD panel only after checking if the notebook
computer is turned off.
Authorized Samsung Repair Centers will carry out safety checks
after a repair. Using a repaired product without testing it for safety
may cause an electric shock or fire.
The temperature may rise and it may cause deformation of the
product.
Do not press the eject button while the CD-ROM drive is in
operation.
You might lose data and the disc might be suddenly ejected and
could cause an injury.
84
Appendix
Do not drop, hit, or apply excessive force to the computer.
Do not insert the fingers into the PC Card Slot.
Failure to do so may result in physical injury or data loss.
There is a danger of injury or electric shock.
Do not allow the antenna and a source of electricity, such as a
socket outlet, to come into contact.
Use recommended computer cleansing solutions when
cleaning the product and only use the computer when it is
completely dry.
There is a danger of electric shock.
Failure to do so may cause electric shock or fire.
When handling computer parts, follow the instructions on the
manual supplied with the parts.
You should not use a paper clip to perform an emergency
disc ejection while the disc is in motion. Make sure to use the
emergency disc eject method only when the Optical Disc Drive
has stopped.
Failure to do so, may cause damage to the product.
If the computer emits smoke or there is a burning smell,
disconnect the power plug from the wall outlet and contact a
Samsung Service Center immediately. Disconnect the power
supply and remove the battery if one is fitted.
There is a danger of injury.
Do not place your face close to the Optical Disc Drive tray when
it is operating.
There is a danger of fire.
There is a danger of injury due to an abrupt ejection.
Do not use a damaged or modified CD.
There is a danger of damaging the product or personal injury.
85
Appendix
Upgrade Related
Keep the computer away from magnetic material.
• Magnetic materials may cause computer malfunction or cause
the battery to discharge.
Take care when touching the product or parts.
The device may be damaged or you may be injured.
• To avoid damaging the computer or magnetic stripe cards,
such as credit cards, keep magnetic stripe cards away from the
computer.
Take care not to throw or drop the computer or its components.
This may cause injury or damage to the product.
Do not use your computer in a hospital or on an aircraft that can
be interfered with by radio frequency.
Make sure to close the computer cover before connecting the
power after a reassembly.
• Avoid using your computer within a 15 cm range of a
pacemaker, if possible, as your computer can interfere with
the pacemaker.
There is a danger of electric shock if your body touches an internal
part.
• To minimize possible interference with a pacemaker, use your
computer only on the side of your body that is opposite the
pacemaker.
Only use parts authorized by Samsung.
Failure to do so, may cause fire or damage the product.
• If you use medical equipment, contact the equipment
manufacturer before using your computer to determine
whether or not the equipment will be affected by radio
frequencies emitted by the computer.
Never disassemble or repair the product by yourself.
If the computer is serviced or repaired by an unqualified person,
the warranty will not cover the repair fees. There is a danger of
accident. Use authorized Samsung Service Centers.
• When in a hospital, turn off your computer and follow all
hospital regulations. Radio frequencies emitted from the
computer may affect medical equipment.
To connect a device that is not manufactured or authorized
by Samsung, enquire at a Samsung Service Center before
connecting the device.
There is a danger of damaging the product.
86
Appendix
Storage and movement related
Cautions on preventing data loss (hard disk
management)
Properly shut down, disconnect and secure the computer cables
before moving it.
Take care not to damage the data on a hard disk drive.
Failure to do so may damage the computer or cause someone to
trip over a loose cable.
• A hard disk drive is so sensitive to external impact that an
external impact may cause loss of data on the surface of the
disk.
For long periods of inactivity or storage, discharge the battery
and separate it from the computer (for external or removable
battery types).
• Take extra care, because moving the computer or an impact
on the computer when it is turned on may damage the data
on the hard disk drive.
This will extend the battery’s lifespan.
• Samsung is not liable for any loss of data on the hard disk
drive.
Do not operate or look at the computer while driving a vehicle.
There is a danger of a traffic accident. Please concentrate on
driving.
87
Appendix
LCD bad pixels
Situations that may damage the data of a hard disk drive and
the hard disk drive itself.
Samsung observes strict specifications regarding the quality
and reliability of the LCD. However, there is a small chance that
a few pixels may be bad. A large number of bad pixels can cause
problems with the display, but a small number of bad pixels does
not generally affect computer performance.
• The data may be lost when an external impact is applied to
the disk while disassembling or assembling the computer.
• The data may be lost when the computer is turned off or reset
by a power failure while the hard disk drive is operating.
Samsung’s quality standards for bad pixels are as follows:
• The data may be lost and irrecoverable due to a computer
virus.
• Bright dot: 2 or fewer
• The data may be lost if the power is turned off while running
an application.
• Black dot: 4 or fewer
• Combination (bright and dark): 4 or fewer
• Sudden impact or movement to the computer while the hard
disk drive is operating, may cause files to be corrupted or bad
sectors on the hard disk.
Cleaning the LCD screen
Clean the LCD screen with a soft cloth dampened with computer
cleansing detergent. When cleaning the screen, move the cloth in
one direction. Do not use excessive force. Doing so may damage
the LCD screen.
To prevent data loss due to damage to the hard disk drive,
please back up the data frequently.
88
Appendix
Important safety information
Setting up the system
• Read and follow all instructions marked on the product and
in the documentation before operating the system. Retain all
safety and operating instructions for future use.
Safety instructions
The system is designed and tested to meet the latest standards for
safety of information technology equipment. However, to ensure
safe use of this product, it is important that the safety instructions
marked on the product and in the documentation are followed.
• Do not use this product near water or a heat source such as a
radiator.
• Set up the system on a stable work surface.
• The product should be operated only with the type of power
source indicated on the rating label.
Always follow these instructions to help guard against
personal injury and damage to the system.
• Ensure that the electrical outlet to power the equipment is
easily accessible in case of fire or short circuit.
• If the computer has a voltage selector switch, make sure that
the switch is in the proper position for your area.
• Openings in the computer case are provided for ventilation.
Do not block or cover these openings. Make sure you provide
adequate space, at least 6 inches (15 cm), around the system
for ventilation when setting up your work area. Never insert
objects of any kind into the computer ventilation openings.
89
Appendix
• Ensure that the fan vents on the bottom of the casing are
clear at all times. Do not place the computer on a soft surface,
doing so will block the bottom vents.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill anything on the computer or its components.
The best way to avoid spills is to not eat or drink near the
computer or its components.
• When using an extension cord with this system, make sure
that the total power rating on the products plugged into the
extension cord does not exceed the extension cord power
rating.
• Some products have a replaceable CMOS battery on the
system board. There is a danger of explosion if the CMOS
battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer.
• For Notebooks with glossy display bezels the user should
consider the placement of the Notebook as the bezel may
cause reflections from surrounding light and bright surfaces.
Dispose of batteries according to the manufacturers
instructions. If the CMOS battery requires replacement ensure
that a qualified technician performs the task.
• When the computer is turned off, a small amount of electrical
current still flows through the computer.
To avoid electrical shock, always unplug all power cables,
remove the battery and modem cables from the wall outlets
before cleaning the system.
90
Appendix
• Unplug the system from the wall outlet and contact a
Samsung Service Center if:
Operating instructions
– – The power cord or plug is damaged.
– – Liquid has been spilled into the computer.
– – The computer does not operate properly when the
operating instructions are followed.
– – The computer was dropped or the casing is damaged.
– – The computer performance changes.
91
When installing and operating devices please refer to safety
requirements in the user manual.
Devices can be used only with the equipment specified in the
technical specifications of the devices.
If any smell of burning or smoke is detected from the
computer the unit should be switched off and the battery
removed. The unit should be checked by a qualified
technician before reuse.
Service and repair of devices should be carried out by
authorized service centers.
Do not allow the portable computer to operate with the base
resting directly on exposed skin for extended periods of time.
The surface temperature of the base will rise during normal
operation (particularly when AC Power is present). Allowing
sustained contact with exposed skin can cause discomfort or
eventually a burn.
Appendix
Replacement parts and
accessories
Battery disposal
Do not put rechargeable batteries or products powered by
non-removable rechargeable batteries in the garbage.
Use only replacement parts and accessories recommended by
manufacturer.
Contact the Samsung Service Center for information on how to
dispose of batteries that you cannot use or recharge any longer.
Follow all local regulations when disposing of old batteries.
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
THERE IS RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
Do not use this product in areas classified as hazardous.
Such areas include patient care areas of medical and
dental facilities, oxygen rich environments, or industrial
areas.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
92
Appendix
• Laser Safety Note: Use of controls or adjustments or
performance of procedures other than those specified
in this manual may result in hazardous radiation
exposure. To prevent exposure to laser beams, do not
try to open the enclosure of a CD or DVD drive.
Laser safety
All systems equipped with CD or DVD drives comply with the
appropriate safety standards, including IEC 60825-1. The laser
devices in these components are classified as “Class 1 Laser
Products” under a US Department of Health and Human Services
(DHHS) Radiation Performance Standard. Should the unit ever
need servicing, contact an authorized service location.
• Class 1M laser radiation when operating part is open.
Do not view directly with optical instruments.
• Class 3B invisible laser radiation when open.
Avoid exposure to the beam.
Connect and disconnect the AC adapter
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
Do not unplug the power cord by pulling the cable only.
93
Appendix
Power cord requirements
General requirements
The power cord set (all plug, cable and AC adapter plug) you
received with your computer meets the requirements for use in
the country where you purchased your equipment.
The requirements listed below are applicable to all countries:
• All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the country
where the power cord set will be used.
Power cord sets for use in other countries must meet the
requirements of the country where you use the computer. For
more information on power cord set requirements, contact your
authorized dealer, reseller, or service provider.
• The power cord set must have a minimum current capacity
of 7A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country’s power system (USA only).
• The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C7
(or C5) connector, for mating with appliance inlet on the
computer.
94
Appendix
Regulatory compliance
statements
The RF field strength of the wireless device or devices that may
be embedded in the notebook are well below all international
RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into the notebook) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe
for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
Wireless guidance
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in the notebook system. The
following section is a general overview of considerations while
operating a wireless device.
Some circumstances require restrictions on wireless devices.
Examples of common restrictions are listed on the next page:
Additional limitations, cautions, and concerns for specific
countries are listed in the specific country sections (or country
group sections). The wireless devices in the system are only
qualified for use in the countries identified by the Radio Approval
Marks on the system rating label. If the country you will be using
the wireless device in, is not listed, please contact your local Radio
Approval agency for requirements. Wireless devices are closely
regulated and use may not be allowed.
95
Appendix
• Radio frequency wireless communication can interfere
with equipment on commercial aircraft. Current
aviation regulations require wireless devices to be
turned off while traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wi-Fi)
and Bluetooth communication devices are examples of
devices that provide wireless communication.
• Every country has different restrictions on the use of
wireless devices. Since your system is equipped with
a wireless device, when traveling between countries
with your system, check with the local Radio Approval
authorities prior to any move or trip for any restrictions
on the use of a wireless device in the destination
country.
• In environments where the risk of interference to other
devices or services is harmful or perceived as harmful,
the option to use a wireless device may be restricted
or eliminated. Airports, Hospitals, and Oxygen or
flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or
eliminated. When in environments where you are
uncertain of the sanction to use wireless devices, ask
the applicable authority for authorization prior to use or
turning on the wireless device.
• If the system came equipped with an internal
embedded wireless device, do not operate the wireless
device unless all covers and shields are in place and the
system is fully assembled.
• Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will
void the authorization to use it. Please contact the
manufacturer for service.
• Only use drivers approved for country in which the
device will be used. See the manufacturer System
Restoration Kit, or contact the manufacturer’s technical
support for additional information.
96
Appendix
Explosive Device Proximity Warning
United States of America
Do not operate a portable transmitter (such as a wireless
network device) near unshielded blasting caps or in
an explosive environment unless the device has been
modified to be qualified for such use.
USA and Canada Safety Requirements and Notices
Do not touch or move antenna while the unit is transmitting or
receiving.
Use On Aircraft Caution
Do not hold any component containing the radio such that the
antenna is very close to touching any exposed parts of the body,
especially the face or eyes, while transmitting.
Regulations of the FCC and FAA prohibit airborne
operation of radio-frequency wireless devices because
their signals could interfere with critical aircraft
instruments.
Do not operate the radio or attempt to transmit data unless the
antenna is connected; if not, the radio may be damaged.
Use in specific environments:
Other wireless devices
The use of wireless devices in hazardous locations is limited by the
constraints posed by the safety directors of such environments.
Safety notices for other devices in the wireless network:
Refer to the documentation supplied with wireless Ethernet
adapters or other devices in the wireless network.
The use of wireless devices on airplanes is governed by the Federal
Aviation Administration (FAA).
The use of wireless devices in hospitals is restricted to the limits
set forth by each hospital.
97
Appendix
The Part 15 radio device operates on a non-interference
basis with other devices operating at this frequency. Any
changes or modification to said product not expressly
approved by Intel could void the user’s authority to
operate this device.
This equipment has been tested and found to comply
with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may
cause harmful interference. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Unintentional emitter per FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
98
Appendix
Intentional emitter per FCC Part 15
If necessary, the user should consult the dealer or an experienced
radio/television technician for additional suggestions. The user
may find the following booklet helpful: “Something About
Interference.”
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in the notebook system. This section
is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
This is available at FCC local regional offices. Our company is not
responsible for any radio or television interference caused by
unauthorized modifications of this equipment or the substitution
or attachment of connecting cables and equipment other than
those specified by our company. The correction will be the
responsibility of the user. Use only shielded data cables with this
system.
Wireless devices that may be in the system are only qualified for
use in the United States of America if an FCC ID number is on the
system label.
This device is restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequency range. FCC requires this product to be
used indoors for the frequency range 5.15 to 5.25 GHz to reduce
the potential for harmful interference to co-channel Mobile
Satellite systems. High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar
stations can cause interference with and/or damage this device.
99
Appendix
Health and safety information
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
Exposure to Radio Frequency (RF) Signals
Certification Information
Wireless devices are not user serviceable. Do not modify
them in any way.
This product can contain an embedded radio transmitter and
receiver. It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S. government. These
FCC exposure limits are derived from the recommendations of two
expert organizations, the National Council on Radiation Protection
and Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the recommendations
were developed by scientific and engineering experts drawn from
industry, government, and academia after extensive reviews of the
scientific literature related to the biological effects of RF energy.
Modification to a wireless device will void the
authorization to use it. Contact manufacturer for service.
Before a new model is available for sale to the public, it must be
certified to the FCC that it does not exceed the exposure limit
established by the FCC. Evaluation per each model is performed
in positions and locations (e.g. at the bottom on the body) as
required by the FCC.
100
Appendix
For corresponding model only
For body worn operation, this model meets the FCC RF exposure
guidelines when used with Samsung accessory designated for this
product. Non-compliance with the above restrictions may result in
violation of FCC RF exposure guidelines.
The Specific Absorption Rate (SAR) is a measure of the rate of
absorption of RF energy by the human body expressed in units
of watts per kilogram (W/kg). The FCC wireless devices to comply
with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
RF exposure or SAR information can be viewed on-line at
www.fcc.gov/oet/ea/fccid/. This site uses this product FCC ID
number on the outside of the product. Sometimes it may be
necessary to remove the battery pack to find number. Once
you have the FCC ID number for a particular product, follow the
instructions on the website and it should provide RF exposure
information or values for typical or maximum SAR for particular
product.
SAR level of this device while operating can be well below the
maximum value. This is because the device is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
101
Appendix
Canada
The term “IC” before the equipment certification number only
signifies that the Industry Canada technical specifications were
met. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than that required
for successful communication. To prevent radio interference
to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the radio
interference regulations of Industry Canada.
Intentional emitter per RSS 210
This device complies with RSS 210 of Industry Canada. Operation
is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired
operation of this device.
(If fitted with 2.4 G band or 5 G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz Band,
may be present (embedded) in your notebook system. This
section is only applicable if these devices are present. Refer to the
system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for
use in Canada if an Industry Canada ID number is on the system
label.
102
Appendix
The power output of the wireless device (or devices), which may
be embedded in your notebook, is well below the RF exposure
limits as set by Industry Canada.
When using IEEE 802.11a wireless LAN, this product is restricted to
indoor use due to its operation in the 5.15 to 5.25 GHz frequency
range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 to 5.25 GHz to reduce the potential
for harmful interference to co-channel mobile satellite systems.
High power radar is allocated as the primary user of the 5.25 to
5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can
cause interference with and/or damage to this device.
Operation of this device is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation of the device.
To prevent radio interference to licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to
licensing.
The maximum allowed antenna gain for use with this device
is 6dBi in order to comply with the E.I.R.P limit for the 5.25 to
5.35 GHz and 5.725 to 5.85 GHz frequency range in point-to-point
operation.
Wireless devices are not user serviceable. Do not modify
them in any way. Modification to a wireless device will
void the authorization to use it. Contact manufacturer for
service.
103
Appendix
Brazil
European Union
Este produto esta homologado pela ANATEL, de acordo com
os procedimentos regulamentados pela Resolucao 242/2000, e
atende aos requisitos tecnicos aplicados.
European Union CE marking and compliance notices
Products intended for sale within the European Union are
marked with the Conformité Européene (CE) Marking, which
indicates compliance with the applicable Directives and European
standards and amendments identified below. This equipment also
carries the Class 2 identifier.
Este equipamento opera em caráter secundário, isto é, não
tem direito a proteção contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode causar interferência a
sistemas operando em caráter primário.
The following information is only applicable to systems labeled
with the CE mark .
European Directives
This Information Technology Equipment has been tested and
found to comply with the following European directives:
• EMC Directive 2004/108/EC
• Low Voltage Directive 2006/95/EC
• R&TTE Directive 1999/5/EC
104
Appendix
Samsung Electronics (UK) Ltd, Euro QA Lab.
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark
with a Notified Body Registration Number and the Alert Symbol is
on the system label.
Blackbushe Business Park Saxony Way, Yateley,
Hampshire GU46 6GG United Kingdom
The power output of the wireless device or devices that may be
embedded in you notebook is well below the RF exposure limits
as set by the European Commission through the R&TTE directive.
European radio approval information (for products
fitted with EU-approved radio devices)
This Product is a Notebook computer; low power, Radio LAN type
devices (radio frequency (RF) wireless communication devices),
operating in the 2.4 GHz/5 GHz band, may be present (embedded)
in your notebook system which is intended for home or office use.
This section is only applicable if these devices are present. Refer to
the system label to verify the presence of wireless devices.
The low band 5.15–5.35 GHz is for indoor use only.
See 802.11b and 802.11g restrictions for specific countries
or regions within countries under the heading “European
Economic Area Restrictions” below.
105
Appendix
EU R&TTE compliance statements
Nation
Česky[Czech]
Dansk[Danish]
Deutsch[German]
Nation
Description
Samsung tímto prohlašuje,
že tento Notebook PC je ve
shodě se základními požadavky
a dalšími příslušnými
ustanoveními směrnice 1999/5/
ES.
Undertegnede Samsung
erklærer herved, at følgende
udstyr Notebook PC overholder
de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/
EF.
Hiermit erklärt Samsung, dass
sich das Gerät Notebook PC
in Übereinstimmung mit den
grundlegenden Anforderungen
und den übrigen einschlägigen
Bestimmungen der Richtlinie
1999/5/EG befindet.
Eesti[Estonian]
English
Español[Spanish]
106
Description
Käesolevaga kinnitab
Samsung seadme Notebook
PC vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele
asjakohastele sätetele.
Hereby, Samsung, declares
that this Notebook PC is in
compliance with the essential
requirements and other
relevant provisions of Directive
1999/5/EC.
Por medio de la presente
Samsung declara que el
Notebook PC cumple con
los requisitos esenciales
y cualesquiera otras
disposiciones aplicables
o exigibles de la Directiva
1999/5/CE.
Appendix
Nation
Ελληνική[Greek]
Français[French]
Italiano[Italian]
Description
Nation
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung
ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ
ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente Samsung
déclare que l’appareil
Notebook PC est conforme aux
exigences essentielles et aux
autres dispositions pertinentes
de la directive 1999/5/CE.
Con la presente Samsung
dichiara che questo Notebook
PC è conforme ai requisiti
essenziali ed alle altre
disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Latviski[Latvian]
Lietuvių[Lithuanian]
Nederlands[Dutch]
107
Description
Ar šo Samsung deklarē, ka
Notebook PC atbilst Direktīvas
1999/5/EK būtiskajām prasībām
un citiem ar to saistītajiem
noteikumiem.
Šiuo Samsung deklaruoja,
kad šis Notebook PC atitinka
esminius reikalavimus ir
kitas 1999/5/EB Direktyvos
nuostatas.
Hierbij verklaart Samsung dat
het toestel Notebook PC in
overeenstemming is met de
essentiële eisen en de andere
relevante bepalingen van
richtlijn 1999/5/EG.
Appendix
Nation
Malti[Maltese]
Magyar[Hungarian]
Polski[Polish]
Description
Nation
Hawnhekk, Samsung, jiddikjara
li dan Notebook PC jikkonforma
mal-ħtiāijiet essenzjali u ma
provvedimenti oħrajn relevanti
li hemm fid-Dirrettiva 1999/5/
EC.
Alulírott, Samsung nyilatkozom,
hogy a Notebook PC megfelel
a vonatkozó alapvetõ
követelményeknek és az
1999/5/EC irányelv egyéb
elõírásainak.
Niniejszym Samsung
oświadcza, Ŝe Notebook PC
jest zgodny z zasadniczymi
wymogami oraz pozostałymi
stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português[Portuguese]
Slovensko[Slovenian]
Slovensky[Slovak]
108
Description
Samsung declara que este
Notebook PC está conforme
com os requisitos essenciais e
outras disposições da Directiva
1999/5/CE.
Samsung izjavlja, da je ta
Notebook PC v skladu z
bistvenimi zahtevami in
ostalimi relevantnimi določili
direktive 1999/5/ES.
Samsung týmto vyhlasuje, že
Notebook PC spĺňa základné
požiadavky a všetky príslušné
ustanovenia Smernice
1999/5/ES.
Appendix
Nation
Suomi[Finnish]
Svenska[Swedish]
Íslenska[Icelandic]
Description
Nation
Samsung vakuuttaa täten
että Notebook PC tyyppinen
laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä
koskevien direktiivin muiden
ehtojen mukainen.
Härmed intygar Samsung
att denna Notebook PC står
I överensstämmelse med de
väsentliga egenskapskrav och
övriga relevanta bestämmelser
som framgår av direktiv
1999/5/EG.
Hér með lýsir Samsung yfir því
að Notebook PC er í samræmi
við grunnkröfur og aðrar kröfur,
sem gerðar eru í tilskipun
1999/5/EC.
Norsk[Norwegian]
Türkiye[Türkçe]
109
Description
Samsung erklærer herved
at utstyret Notebook
PC er i samsvar med de
grunnleggende krav og øvrige
relevante krav i direktiv 1999/5/
EF.
Bu belge ile, Samsung bu
Notebook PC’nin 1999/5/
EC Yönetmeliğinin temel
gerekliliklerine ve ilgili
hükümlerine uygun olduğunu
beyan eder.
Appendix
Manufacturer information
To view the EU Declaration of Conformity
for this product (in English only), go to:
www.samsung.com/uk/support/main/supportMain.do or
www.samsung.com/uk/support then search the model number of
the product.
Samsung Electronics Co., Ltd.
129, Samsung-Ro, Yeongtong-Gu, Suwon-City, Gyeonggi-Do,
443-742, Korea
If the Declaration of Conformity for the model you are interested
in is not available on our web-site, please contact your distributor
or below address.
Samsung Electronics Suzhou Computer Co., Ltd.
No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province,
215021, China
doc.eu@samsung.com
Tel: +86-0512-6253-8988
Samsung Electronics Vietnam Co., Ltd.
Yen Phong 1, I.P Yen Trung Commune, Yen Phong Dist., Bac Ninh
Province, Vietnam
For the web or the phone number of the Samsung Service Center,
see the Warranty or contact the retailer where you purchased your
product.
110
Appendix
Due to the fact that the frequencies used by
802.11b/802.11g wireless LAN devices may not yet be
harmonized in all countries, 802.11b/802.11g products
are designed for use only in specific countries or regions,
and are not allowed to be operated in countries or regions
other than those of designated use.
European economic area restrictions
Local restriction of 802.11b/802.11g radio usage
Note to integrator: The following statements on local restrictions
must be published in all end-user documentation provided with
the system or product incorporating the wireless product.
As a user of these products, you are responsible for
ensuring that the products are used only in the countries
or regions for which they were intended and for verifying
that they are configured with the correct selection of
frequency and channel for the country or region of use.
Any deviation from permissible settings and restrictions in
the country or region of use could be an infringement of
local law and may be punished as such.
111
Appendix
RTC caution
The European variant is intended for use throughout the European
Economic Area. However, authorization for use is further restricted
in particular countries or regions within countries, as follows:
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended
by the manufacturer. Discard used batteries according to the
Manufacturer’s instruction.
General
European standards dictate maximum radiated transmit power
of 100 mW effective isotropic radiated power (EIRP) and the
frequency range 2400–2483.5 MHz.
The low band 5.15–5.35 GHz is for indoor use only.
Belgium
For private use outdoors in public spaces, no registration is
necessary for distances less than 300 m. For distances greater
than 300 m, you must register with the Belgian Institute for Postal
services and Telecommunications (BIPT). For commercial use
outdoors, you must obtain a license from the BIPT. For registration
or licensing, please contact the BIPT.
For other languages, refer to the corresponding manuals.
France
The low band 5.15–5.35 GHz is for indoor use only.
112
Appendix
WEEE symbol information
Household users should contact either the retailer where
they purchased this product, or their local government office,
for details of where and how they can take these items for
environmentally safe recycling.
Correct disposal of this product (Waste Electrical &
Electronic Equipment)
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial
wastes for disposal.
(Applicable in countries with separate collection
systems)
This marking on the product, accessories or literature indicates
that the product and its electronic accessories (for example,
charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life.
For information on Samsung’s environmental commitments
and product specific regulatory obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/
corporatecitizenship/data_corner.html
To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources.
India only
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers 18002668282, 180030008282.
This product is RoHS compliant.
113
Appendix
USA only
Correct disposal of batteries in this product
(Applicable in countries with separate collection
systems)
This Perchlorate warning applies only to primary CR (Manganese
Dioxide) Lithium coin cells in the product sold or distributed ONLY
in California USA.
“Perchlorate Material- special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect
or call, (877) 278-0799.
This marking on the battery, manual or packaging indicates that
the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked,
the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels
in EC Directive 2006/66. If batteries are not properly disposed
of, these substances can cause harm to human health or the
environment.
For battery recycling go to call2recycle.org; or call 1-800-822-8837.
To protect natural resources and to promote material re-use,
please separate batteries from other types of waste and recycle
them through your local, free battery return system.
Warning: This product contains chemicals known to the state of
California to cause cancer, birth defects, or other reproductive
harm.
114
Appendix
Samsung package Take-Back
program
In partnering with select recyclers, Samsung offers packaging
take-back at no cost to you.
Simply call the following number for the locations nearest you.
CRT Processing, LLC
(877) 278-0799
Kathy Severson – Logistics contact
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278-0799
115
Some content may differ from the computer depending on the region, service provider, software version, or computer model, and is
subject to change without prior notice.
www.samsung.com
English. 05/2016. Rev. 1.1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Modify Date                     : 2016:07:19 09:48:26-07:00
Create Date                     : 2016:07:12 20:23:30-04:00
Metadata Date                   : 2016:07:19 09:48:26-07:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Format                          : application/pdf
Document ID                     : uuid:d2736e3b-c5ac-4625-872b-e0919618f4e3
Instance ID                     : uuid:57bb601a-9e76-4987-8fdd-0a060d815684
Producer                        : Adobe PDF Library 9.9
Page Count                      : 79
Creator                         : Adobe InDesign CS5.5 (7.5.3)

EXIF Metadata provided by EXIF.tools