Intel ND1 802.11 a/b/g/n, BLE and BT Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2368873
Application ID	qLFx+ahoieEWeCaTftngEg==
Document Description	Regulatory Flyer
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.78kB (484689 bits)
Date Submitted	2014-08-25 00:00:00
Date Available	2015-02-21 00:00:00
Creation Date	2014-08-22 18:48:06
Producing Software	Mac OS X 10.9.4 Quartz PDFContext
Document Lastmod	2014-08-22 18:48:06
Document Title	Untitled
Document Creator	Preview

IMPORTANT REGUL RY INFORMATION
FCC Statement (USA)
This device complies With Part ‘IS of the FCC Rules. Operation is subiect to
the following two conditions:
. This device may not cause harmful interference
- This device must accept any Interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply With the limits for a
Class 8 digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference in
a reSidential installation. This equipment generates. uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference Will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected,
. Consult the dealer or an experienced radio/TV technician for help.
WARNING! Exposure to Radio Frequency Radiation The radiated
output power of this device is below the FCC and Industry Canada radio
frequency exposure limits, 5mm separanm from body is required.
This device must not be co-located or operating in conjunction With any
other antenna or transmitter
CAUTION: when using IEEE 802.11a wireless LAN, this product is
restricted to indoor use, due to its operation in the 5.15- to 5.25-GHZ
frequency range. The FCC requires this product to be used indoors for
the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential
for harmful interference to co-(hannel mobile Satellite systems,
Highrpower radar is allocated as the primary user ofthe 5.257 to
5.35-GH2 and 5.65- to 5t85»GH2 bands. These radar stations can
cause interference with and/or damage to this device.
H47948-001
ICES-003 (Canada)
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the interfer-
ence-causing equipment standard entitled: “Digital Apparatus,"
lCESrDO3 of the Canadian Department of Communications.
Cet appareil numérique respecte les limites bruits radioe'lectrioues
applicables aux appareils numérlques de Classe Bprescrites dans la
norme sur le mate'riel brouilleur: "Appareils Numérlques", NMB-OO3
e’dictee par le Ministre Canadian des Communications.
This device has Bluetooth and WiFi capabilities, the device complies
wrth Industry Canada licenserexempt RSS standard(si. Operation is
subject to the folloWIng two conditions: (1 ) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device,
Cet appareil est équipe de capacites Bluetooth et Wi- '; il est con-
forme aux normes CNR d'lndustrie Canada d'exemption de licence,
Son fonctionnement est soumis aux deux conditions suivantes: 1)
cet appareil ne provoque pas d'interférences nuisrbles et 2) cet ap-
pareil doit absorber les interferences qu‘il regoit y compris celles qui
peuvent provoquer un fonctionnement inopin
Europe (CE Decl on of Con orm ty)
EXPOSURE TO RADIO FREQUENCV RADIATION.
The exposure standard employs a unit of measurement known
as the Specific Absorption Rate (SAR), The SAR was obtained by
testing the device at standard operating positions With the
device transmitting at its highest certified power level in all
tested frequency bands. The actual SAR of the device while oper-
ating can be well below the maximum value. because the device
operates at multiple power levels and uses only the power re-
quired to reach the network.
This product complies With the Low Voltage Directive
2006/95/EC; EMC Directive 2004/108/EC, EU Directive R&TTE
Directive 1999/5/EC, and ROHS Directive 2011/65/EU. Point of
contact: Intel Corporation, Attn: Corporate Quality, 200 Mission
College Blvd, Santa Clara, CA 05054 USA FroductEcology@
intel.com C e

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
Title                           : Untitled
Producer                        : Mac OS X 10.9.4 Quartz PDFContext
Creator                         : Preview
Create Date                     : 2014:08:22 18:48:06Z
Modify Date                     : 2014:08:22 18:48:06Z

EXIF Metadata provided by EXIF.tools