Intelligent Technology GS305B 5-Port Gigabit Ethernet Switch User Manual GS308C GS305B MANUAL
Intelligent Technology Inc. 5-Port Gigabit Ethernet Switch GS308C GS305B MANUAL
Users Manual
FCC Certifications
This Equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received;
including interference that may cause undesired
operation.
CE Mark Warning
This
equipm
ent complies with the requirements relating to
electromagnetic compatibility, EN 55022 class B for ITE,
the essential protection requirement of Council Directive
2004/108/EC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its
products and it may be possible that information in this
document is not up-to-date. Please check with your local
distributors for the latest information. No part of this
document can be copied or reproduced in any form
without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of
their respective companies.
Copyright © 2012, All Rights Reserved.
1
660-NB2-GS305B2A000
LEDs Definition
This switch contains LEDs to show the activities and
information of the ports, including power LED and Link/
Act LEDs.
Please refer to the front panel of the switch for the
positions of the LEDs :
5-Port
Look at the following table for the description of the LEDs:
LED Status Operation
Power Steady Green The switch is powered on
Of
f
The switch is powered of
f
Link/ ACT
S
tead
y
Green Valid po
r
t connection
Blinking Green Valid po
r
tconnectionand
there is data transmitting/
receiving
Of
f
Po
r
t disconnected
2
Product Specifications
Standard
IEEE802.3 10BASE-T IEEE802.3u
100BASE-TX IEEE802.3ab
1000BASE-T
IEEE802.3x
full
duplex flow control IEEE802.3az
Interface 5 *10/100/1000 Mbps RJ-45
Cable
Connections
RJ-45 (10BASE-T): Categor
y
3,4,5
UTP/STP
RJ-45 (100BASE-TX): Category 5
UTP/STP
RJ-45 (1000BASE-T): Category 5,5e or
enhanced UTP/STP
Network
Data Rate 10/100/1000 Mbps Auto-negotiation
Transmission
Mode
10/100Mbps: Full-duplex, Half-duplex
1000Mbps: Full-duplex
MAC
Address
Table
GS305B: 2K
Jumbo Frame 9K bytes
Bu
f
f
er
Memory 128K bytes
Temperature Operating: 0°C ~ 40°C (32°F ~104°F)
Storage: -40°C ~ 70°C (-40°F ~158°F)
Humidity Ope
r
ating: 10% ~ 90% RH,
non-condensing
Storage: 5%~90% RH, non-condensing
LED
Indications System: Power
Ports: Link/Act
Power Supply Internal power adapter
Dimensions GS305B: 149*84*26mm
Case
Metal
Emission FCC, CE Class B
3