InterLogix 1068845 D Mobileview Penta Docking Station Installation Instructions Sheet User Manual Mobile View
2015-08-27
User Manual: InterLogix 1068845 D Mobileview Penta Docking Station Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
MobileView PENTA Docking Station Installation Sheet Introduction 4. The MobileView PENTA docking station lets a workstation access and view surveillence data stored on a PENTA series removable storage caddy. The docking station connects to an available USB port on the workstation running Video Manager. Follow the connection steps listed below to view data files. Connect the other end of the USB cable to an available USB port on the PC running the MobileView Video Manager application. 5. Once the connections have been made, your docking station is ready for use. Figure 1: MobileView docking station connection diagram Note: Video Manager software (purchased separately) is required to access, review, and save PENTA series surveillance data. Package contents The MobileView Docking Station is shipped with the following items: • Docking station unit • Power supply • Power cord • USB cable (6 ft) • 2 keys (to lock/unlock the storage caddy) Removing the storage caddy from the DVR • MobileView PENTA Docking Station Installation Sheet To access data from a storage caddy using the docking station, you must first remove it from the DVR. Workstation minimum requirements Caution: The DVR must be completely powered off before the storage caddy can be removed. The workstation must meet the following minimum requirements in order to connect to the docking station: • MobileView Video Manager installed • Available USB port • DVD-RW drive (to burn data) You can remove the storage caddy from the DVR using two different methods: • — or — • Installing the docking station To install the MobileView docking station: Connect the power supply to the 12 VDC slot on the back panel of the docking station. 2. Connect the plug to a wall socket. 3. Connect the USB cable to the USB port on the back panel of the docking station. © 2011 UTC Fire & Security. All rights reserved. Using the key The maintenance plug should only be used if you need to remove the storage caddy from the DVR without waiting for the shutdown period to expire. Use Figure 1 below as a visual guide to install the MobileView docking station. 1. Using the maintenance plug To remove the storage caddy from the DVR using maintenance plug: 1/2 1. Insert the maintenance plug into either the upper or lower PS2 port. 2. Allow the DVR to completely shut down. This could take two minutes. P/N 1068845 • REV D • ISS 04MAY 11 3. Leave the maintenance plug connected to the port. 4. On the storage caddy, rotate the key latch to the Unlock position. 5. 6. To remove the removable storage caddy from the docking station: 1. Switch the power into the Off position. Pull the storage caddy from the DVR using the pullout handle. 2. Unlock the removable storage caddy using the key provided. Remove the maintenance plug. 3. Pull the HDD from the docking station using the pullout handle. WARNING: Do not remove the maintenance plug before the storage caddy has been removed. Doing so may cause the DVR to restart. To remove the storage caddy from the DVR using the key only: 1. On the storage caddy, rotate the key latch to the Unlock position. 2. Wait for the LCD to display the message, DRIVE UNMOUNTED. 3. Pull the storage caddy from the DVR using the pullout handle. 4. The DVR powers off automatically. Using your MobileView Docking Station Once you have removed the storage caddy from the DVR, you can insert it into the docking station. To install the removable storage caddy to the docking station: 1. With the main power turned off, insert the storage caddy gently into the docking station. 2. Rotate the key latch to the locked position and switch the power to ON. Both the switch and HDD Activity LED light up. 3. Once the PC recognizes the storage caddy, the docking station is ready to provide access to stored data. Accessing data from the storage caddy For information on how to access and manipulate files, consult the MobileView Video Manager User Manual (1056730). Regulatory information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Contact information For contact information see our Web site: www.interlogix.com or call toll-free: 888.437.3287 in the US. Caution: The docking station must remain on a level surface while in use. Figure 2: MobileView docking station front panel POWER SWITCH HDD ACTIVITY LED LOCKING MECHANISM 2 of 2 REMOVABLE HDD CADDY P/N 1068845 • REV D • ISS 04MAY 11
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:12:08 12:13:38-08:00 Creator Tool : Acrobat PDFMaker 7.0.7 for Word Modify Date : 2011:05:05 09:41:26-07:00 Metadata Date : 2011:05:05 09:41:26-07:00 Thumbnail Width : 188 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19083 bytes, use -b option to extract) Format : application/pdf Title : MobileView PENTA Docking Station Installation Sheet Creator : Sarah Fernandez Description : Docking Stationg Document ID : uuid:8460a5de-442d-4c13-a6f9-b4ead6043f20 Instance ID : uuid:8dd112f9-1216-4c16-a53c-347207c63e63 Rendition Class : proof:pdf Revision 0020date : 08DEC10 Model 0020name : MobileView PENTA Model 0020number : 9-XXX Revision 0020number : C Part 0020number : 1068845 Company : UTC Fire & Security Category : Installation Sheet N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : Arial-ItalicMT, ArialMT, Arial-BoldMT Font Family : Arial, Arial, Arial Font Face : Italic, Regular, Bold Font Type : Open Type, Open Type, Open Type Font Version : Version 2.90, Version 3.00, Version 3.00 Font Composite : False, False, False Font File Name : ARIALI.TTF, ARIAL.TTF, ARIALBD.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Page Layout : OneColumn Page Count : 2 For : Payam Varshoei, Bounding Box : 54 28 579 756 Container Version : 11 Creator Version : 15 Author : Sarah Fernandez Model Name : MobileView PENTA Model Number : 9-XXX Part Number : 1068845 Revision Date : 08DEC10 Revision Number : C Subject : Docking Stationg Image Height : 728 Image Width : 525 Image Size : 525x728 Megapixels : 0.382EXIF Metadata provided by EXIF.tools