InterLogix 1073193E Truvision Nvr 22 22S 22P Quick Start Guide En (S/P) User Manual

User Manual: InterLogix 1073193E-Truvision-Nvr-22-Nvr-22S-Nvr-22P-Quick-Start-Guide-En

Open the PDF directly: View PDF .
Page Count: 8

P/N 1073193-EN • REV E • ISS 27JUL17

© 2017 United Technologies Corporation. Interlogix is part of UTC Climate, Controls & Security, a unit of United

Technologies Corporation. All rights reserved.

TruVision NVR 22 (S/P) Quick Start

Guide

Figure

1: Back panel connections (TVN 22S shown)

1. Connect one audio input to RCA connectors.

2. Connect to an HDTV. The HDMI connection

supports both digital audio and video.

3. Connect one CCTV monitor (BNC-type

connectors).

4. Connect to a RS-232 device.

5. RS-485 port not used.

6. Connect to a keypad (KTD-405 shown).

7. Connect up to four alarm relay outputs.

8. Connect to a network (RJ45).

9. Connect to speakers for audio output.

10. Connect to a VGA monitor.

11. Universal Serial Bus (USB). Connect to an

additional device such as a USB mouse,

CD/DVD burner, or USB HDD.

12. Connect to an optional eSATA device such as

HDD, CD/DVD-RM.

13. Connect up to 16 alarm inputs (depending on

model).

14. Connect to ground.

15. Connect to a power cord.

16. 8/16 PoE ports (depending on model). (TVN 22S

only)

Default IP address: 192.168.1.82

2 TruVision NVR 22 (S/P) Quick Start Guide

Figure

2: Front panel controls

For detailed information on all the

button functions, please refer to the user manual.

Name Description

1

. Channel buttons Switch between different cameras in live, PTZ control or playback modes.

Use the soft keyboard to enter numerals 0 to 9.

2

. Display buttons

F1: In Playback mode, click to start and stop video clipping. For audio, press F1 and a

numerical button to play the audio of the specified camera in live view.

In System Information mode, get the DDNS URL. In User Management mode, pop up the

Permission screen of a selected item in User Management > User > User Management.

Delete a selected item from USB flash drive. Exit the virtual keypad.

F2: In live view mode, all-day playback, and playback modes press to display or hide the time

or control bar. In PTZ mode, stop all ongoing operations. Select or deselect an item. Enter a

selected folder of the external storage device, such as a USB flash drive used for archiving.

A: In Live View mode, select the main monitor.

B: In Live View mode, select the event monitor.

Display

: In multiview mode, toggle through the various multiviews (full, quad, 1+5, 1+7, 9, and

16).

In HDD information mode and user management mode delete a selected item. In PTZ mode,

delete a selected key

point. In Log Search mode, display the details of a log file in Log Search

result.

Seq: In Live View mode, start/stop sequencing cameras on the current monitor.

3

. Menu and Search

buttons

Menu: Enter/exit the main menu.

Search: In live view, enter the advanced search menu.

4

. IR receiver Receiver for IR remote.

To connect the remote control to the recorder, press the Device button, enter the device

address, and press Enter. See “IR remote control” on page 5 for more information.

TruVision NVR 22 (S/P) Quick Start Guide 3

5

. Front panel lock You can lock or unlock the front panel with a key (provided).

6

. Status LEDs

Power: A steady green light indicates the recorder is working correctly. Red indicates a fault.

Event Alarm: A flashing red light indicates that there is a sensor Alarm In or another alarm

such as motion or tampering. No light indicates that there is no alarm.

HDD: HDD indicator blinks red when data is being read from or written to the HDD. A steady

red light indicates an HDD exception or error.

Tx/Rx: Flashing green indicates a normal network connection. No light indicates that it is not

connected to a network.

Technical Alarm: A steady red light indicates that there is a technical alarm from the

recorder.

No light indicates that there is no alarm.

7

. Playback buttons

Reverse

: In live view mode, use to play back the earliest video. In playback mode, playback a

camera in the reverse direction.

Pause: In live view, freeze the

last image of the live display for all active cameras displayed. In

playback mode, stop playback.

Play: In live view mode, play all day playback of the current camera (upper-left video tile if in

multiview mode). In playback mode, play back a camera in the forward direction. In search

mode, play back a selected video or view a snapshot. In PTZ mode, do an auto tour.

Live: Switch to live view mode.

Replay: In playback mode, start playing the current file. Starts at the beginning of the file.

8

. PTZ buttons

Zoom +/-

: In live view mode, playback mode, and PTZ control mode use this button to zoom in

and out. Also use them to navigate within menus.

Preset: In PTZ Control mode, press Preset and a numeric button to call the specified preset.

Also use to edit holiday mode, video search mode, HDD selection mode, user management

mode, bookmark management, and bookmark search.

Tour

: In PTZ Control mode, press Tour and a numeric button to call the specified shadow tour.

Also use to scroll between calendar months and to navigate in a text field.

9

. Direction

The DIRECTION buttons are used to navigate between different fields and items in menus.

Enter button

The ENTER button is used to confirm selection in any of the menu modes.

10

. Archive button

Press once to enter quick archive mode. Press twice to start archiving. Indicator blinks green

when data is being written to backup device.

11

. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a USB mouse, CD/DVD

burner, and USB Hard Disk Drive (HDD).

4 TruVision NVR 22 (S/P) Quick Start Guide

Figure

3: Quick access toolbar

1. Pause: Freeze live image of the selected

camera.

2. Start Manual recording: Start/stop manual

recording.

3. Instant Playback: Play back the recorded

video from the last five minutes.

4. Audio On: Enable/disable audio output.

5. Snapshot: Capture a snapshot of a video

image.

6. PTZ Control: Enter PTZ control mode.

7. Digital Zoom: Enter digital zoom mode.

8. Image Settings: Modify the image lighting levels.

9. Auxiliary Focus: Automatically focus the camera

lens.

10. Lens Initialization: Initialize the lens of a camera

with a motorized lens.

11. Stream Information: Display the real-time frame

rate, bit rate, resolution and video compression.

12. Close: Close the toolbar.

Package contents

The TruVision NVR 22(S/P) (model TVN 22

(S/P) is shipped with the following items:

• IR (infrared) remote control

• Two AAA batteries for the remote control

• AC power cords (US, Europe, UK)

• USB mouse

• NVR

• CD with software and manuals

• TruVision NVR 22(S/P) Quick Start Guide

• TruVision NVR 22(S/P) User Manual (on

CD)

• TruVision Recorder Operator Guide (on

CD)

Installation environment

Refer to the user manual for detailed

information, but observe these important

requirements:

• Place the unit in a secure location.

• Ensure that the unit is in a well-ventilated

area.

• Do not expose the unit to rain or moisture.

Quick install

Recommended steps for setting up the

recorder:

1. Connect all the devices required to the

back panel of the recorder. See Figure 1

on page 1.

Basic connections:

Connect monitor A to the VGA or HDMI

output. Connect the mouse to the USB port

in the front panel.

Optional connections:

All the other connections shown are

optional and depend upon installation

requirements.

2. Connect the power supply to the unit and

turn on the power.

3. Set up the unit with the required settings

using the setup Wizard.

First-time use

The recorder has an express installation

wizard that lets you easily configure basic

recorder settings when first used. It configures

all cameras simultaneously. The configuration

can then be customized as required.

TruVision NVR 22 (S/P) Quick Start Guide 5

By default, the setup wizard will start once the

recorder has loaded. The wizard walks you

through some of the more important settings

of your recorder. Select the preferred

language for the system and then enter the

administrator password.

The wizard will then guide you through the

menus to set the time and date, network

configuration, HDD management, and

recording configuration.

When all the required changes have been

entered, click Finish to exit the wizard. The

recorder is now ready to use. Recording starts

automatically.

Operating the recorder

There are several ways to control the unit:

• Front panel control

• IR remote control

• Mouse control

• TVK-800 keypad

• Web browser control

• Software (TruVision Navigator, TVRmobile

or other video management or integration

software platforms)

Front panel

The buttons on the front panel control most

functions. See Figure 2 on page 4 for the

locations of the controls.

IR remote control

The IR remote control buttons are similar to

those on the front panel. Place the two AAA

batteries in the remote control.

To connect the remote control to the

recorder:

1. Press Menu on the front panel or right-click

the mouse and select Menu. The main

menu screen appears.

2. Select Display Mode Settings > Monitor.

3. Check the recorder’s device address value.

The default value is 255. The device

address is valid for all IR controls.

4. On the remote control press the Device

button.

5. Enter the device address value. It must be

the same as that on the recorder.

6. Press OK on the remote control.

USB mouse

The USB mouse provided with the recorder

operates all the functions of the recorder,

unlike the front panel, which has limited

functionality. The mouse lets you navigate and

make changes to settings in the user

interface.

Connect the mouse to the recorder by

plugging the mouse USB connector into the

USB port on the back or front panel. The

mouse is immediately operational and the

pointer should appear.

Web browser control

The recorder’s Web browser lets you view,

record, and play back videos as well as

manage all aspects of the recorder from any

PC with Internet access. The browser’s easy-

to-use controls give you quick access to all

recorder functions.

To access the unit, open a web browser and

enter the IP address assigned to the recorder

as a web address. In the logon screen, enter

the user ID and password:

The default values for recorder network

settings are:

• DHCP: Disabled by default.

• IP address - 192.168.1.82

• Subnet mask - 255.255.255.0

• Gateway address - 192.168.1.1

• Server Port: 8000

• HTTP Port: 80

• RTSP port: 554

Note: The following ports need to be

forwarded in the router in order to connect

properly: Server port and RTSP port.

6 TruVision NVR 22 (S/P) Quick Start Guide

Figure 4: Web browser interface

Live view mode

Live mode is the normal operating mode of the

unit where you watch live pictures from the

cameras.

Regularly used functions in live view can be

quickly accessed by clicking the left-button of

the mouse when its cursor is on the camera

image. The shortcut pop-up toolbar appears.

See Figure 3 on page 4 for a description of

the functions available.

Configuring the recorder

The recorder has an icon-driven menu

structure that allows you to configure the unit’s

parameters. Each command icon displays a

screen that lets you edit a group of settings.

Most menus are available only to system

administrators.

Refer to the recorder user manual for detailed

information on configuring the unit.

To access the main menu from live view:

• Press the Menu button on the remote

control or front panel.

- Or -

• Right-click the mouse and select Menu

from the pop-up menu.

The main menu screen appears. Move the

mouse over a command icon in the menu

toolbar and click to select it.

Description of the command icons in the

menu toolbar:

Configures display settings.

Configures analog and IP

camera settings.

Configures standard network

settings.

Configures recording settings.

Configures alarm and event

settings such as alarm

inputs/outputs, notifications, and

intrusion panel/zone setup.

Configures system settings.

Configures storage

management.

Configures user settings.

View system information.

TruVision NVR 22 (S/P) Quick Start Guide 7

Provides reference information

to the various toolbars and

menus within the interface.

Provides access to logout,

reboot and shutdown options.

Specifications

Power supply

:

TVN 22 100 to 240 VAC,

1 A, 50 to 60 Hz

TVN 22S 100 to 240 VAC,

2.5 A, 50 to 60 Hz

TVN 22P 100 to 240 VAC,

2 A, 50 to 60 Hz

Power consumption

(without HDD):

≤30 W

Operating temperature:

-10 to +55 ºC

(14 to 131 °F)

Relative humidity

: 10 to 90%

Dimensions (W x D x H):

TVN 22 /

TVN 22S

442 × 371 × 74 mm

(17.4 x 14.6 x 2.9 in.)

TVN 22P 442 x 442 x 92 mm

(17.4 x 17.4 x 3.6 in.)

Weight (without HDD):

TVN 22 /

TVN 22S

≤ 5 kg

TVN 22P ≤10Kg

Contact information

For contact information, go to

www.interlogix.com, or

www.utcfssecurityproducts