InterLogix 1073221A Ns3503 16P 4C User Manual En

2016-11-30

• 1. INTRODUCTION
  • 1.1 Packet Contents
  • 1.2 Product Description
    • A New Generation Ultra PoE Managed Switch with Advanced L2/L4 Switching and Security
    • 60 W of Power over 4-pair UTP
    • Built-in Unique PoE Functions for Powered Devices Management
    • Intelligent Powered Device Alive Check
    • Scheduled Power Recycling
    • PoE Schedule for Energy Saving
    • PoE Usage Monitoring
    • Environment-friendly, Smart Fan Design for Silent Operation
    • IPv6/IPv4 Dual Stack Management
    • Robust Layer 2 Features
    • Efficient Traffic Control
    • Powerful Security
    • Advanced Network Security
    • Friendly and Secure Management
    • Flexibility and Long-distance Extension Solution
  • 1.3 How to Use This Manual
  • 1.4 Product Features
    • Physical Port
    • Power over Ethernet
    • Layer 2 Features
    • Quality of Service
    • Multicast
    • Security
    • Management
  • 1.5 Product Specifications
    • NS3503-16P-4C
• 2. INSTALLATION
  • 2.1 Hardware Description
    • 2.1.1 Switch Front Panel
    • 2.1.2 LED Indications
    • 2.1.3 Switch Rear Panel
  • 2.2 Installing the Switch
    • 2.2.1 Desktop Installation
    • 2.2.2 Rack Mounting
    • 2.2.3 Installing the SFP transceiver
• 3. SWITCH MANAGEMENT
  • 3.1 Requirements
  • 3.2 Management Access Overview
  • 3.3 Administration Console
  • 3.4 Web Management
  • 3.5 SNMP-based Network Management
  • 3.6 IFS Smart Discovery Utility
• 4. WEB CONFIGURATION
  • 4.1 Main Web Page
    • 4.1.1 Save Button
    • 4.1.2 Configuration Manager
      • 4.1.2.1 Saving Configuration
  • 4.2 System
    • 4.2.1 System Information
    • 4.2.2 IP Configurations
    • 4.2.3 IPv6 Configuration
    • 4.2.4 User Configuration
    • 4.2.5 Time Settings
      • 4.2.5.1 System Time
      • 4.2.5.2 SNTP Server Settings
    • 4.2.6 Log Management
      • 4.2.6.1 Local Log
      • 4.2.6.2 Local Log
      • 4.2.6.3 Remote Syslog
      • 4.2.6.4 Log Message
    • 4.2.7 SNMP Management
      • 4.2.7.1 SNMP Overview
      • 4.2.7.2 SNMP System Information
      • 4.2.7.3 SNMP View
      • 4.2.7.4 SNMP Access Group
      • 4.2.7.5 SNMP Community
      • 4.2.7.6 SNMP User
      • 4.2.7.7 SNMPv1, 2 Notification Recipients
      • 4.2.7.8 SNMPv3 Notification Recipients
      • 4.2.7.9 SNMP Engine ID
      • 4.2.7.10 SNMP Remote Engine ID
  • 4.3 Port Management
    • 4.3.1 Port Configuration
    • 4.3.2 Port Counters
    • 4.3.3 Bandwidth Utilization
    • 4.3.4 Port Mirroring
    • 4.3.5 Jumbo Frame
    • 4.3.6 Port Error Disabled Configuration
    • 4.3.7 Port Error Disabled
    • 4.3.8 Protected Ports
  • 4.4 Link Aggregation
    • 4.4.1 LAG Setting
    • 4.4.2 LAG Management
    • 4.4.3 LAG Port Setting
    • 4.4.4 LACP Setting
    • 4.4.5 LACP Port Setting
    • 4.4.6 LAG Status
  • 4.5 VLAN
    • 4.5.1 VLAN Overview
    • 4.5.2 IEEE 802.1Q VLAN
    • 4.5.3 Management VLAN
    • 4.5.4 Create VLAN
    • 4.5.5 Interface Settings
    • 4.5.6 Port to VLAN
    • 4.5.7 Port VLAN Membership
    • 4.5.8 Protocol VLAN Group Setting
    • 4.5.9 Protocol VLAN Port Setting
    • 4.5.10 GVRP Setting
    • 4.5.11 GVRP Port Setting
    • 4.5.12 GVRP VLAN
    • 4.5.13 GVRP Statistics
    • 4.5.14 VLAN setting example:
      • 4.5.14.1 Two separate 802.1Q VLANs
      • 4.5.14.2 VLAN Trunking between two 802.1Q aware switches
  • 4.6 Spanning Tree Protocol
    • 4.6.1 Theory
    • 4.6.2 STP Global Settings
    • 4.6.3 STP Port Setting
    • 4.6.4 CIST Instance Setting
    • 4.6.5 CIST Port Setting
    • 4.6.6 MST Instance Configuration
    • 4.6.7 MST Port Setting
    • 4.6.8 STP Statistics
  • 4.7 Multicast
    • 4.7.1 Properties
    • 4.7.2 IGMP Snooping
      • 4.7.2.1 IGMP Setting
      • 4.7.2.2 IGMP Querier Setting
      • 4.7.2.3 IGMP Static Group
      • 4.7.2.4 IGMP Group Table
      • 4.7.2.5 IGMP Router Setting
      • 4.7.2.6 IGMP Router Table
      • 4.7.2.7 IGMP Forward All
    • 4.7.3 IGMP Snooping Statics
    • 4.7.4 MLD Snooping
      • 4.7.4.1 MLD Setting
      • 4.7.4.2 MLD Static Group
      • 4.7.4.3 MLD Group Table
      • 4.7.4.4 MLD Router Setting
      • 4.7.4.5 MLD Router Table
      • 4.7.4.6 MLD Forward All
    • 4.7.5 MLD Snooping Statics
    • 4.7.6 Multicast Throttling Setting
    • 4.7.7 Multicast Filter
      • 4.7.7.1 Multicast Profile Setting
      • 4.7.7.2 IGMP Filter Setting
      • 4.7.7.3 MLD Filter Setting
  • 4.8 Quality of Service
    • 4.8.1 Understanding QoS
    • 4.8.2 General
      • 4.8.2.1 QoS Properties
      • 4.8.2.2 QoS Port Settings
      • 4.8.2.3 Queue Settings
      • 4.8.2.4 CoS Mapping
      • 4.8.2.5 DSCP Mapping
      • 4.8.2.6 IP Precedence Mapping
    • 4.8.3 QoS Basic Mode
      • 4.8.3.1 Global Settings
      • 4.8.3.2 Port Settings
    • 4.8.4 Rate Limit
      • 4.8.4.1 Ingress Bandwidth Control
      • 4.8.4.2 Egress Bandwidth Control
      • 4.8.4.3 Egress Queue
    • 4.8.5 Voice VLAN
      • 4.5.8.1 Introduction to Voice VLAN
      • 4.8.5.2 Properties
      • 4.8.5.3 Telephony OUI MAC Setting
      • 4.8.5.4 Telephony OUI Port Setting
  • 4.9 Security
    • 4.9.1 802.1X
      • 4.9.1.1 Understanding IEEE 802.1X Port-based Authentication
      • 4.9.1.2 802.1X Setting
      • 4.9.1.3 802.1X Port Setting
      • 4.9.1.4 Guest VLAN Setting
      • 4.9.1.5 Authenticated Host
    • 4.9.2 RADIUS Server
    • 4.9.3 TACACS+ Server
    • 4.9.4 AAA
      • 4.9.4.1 Login List
      • 4.9.4.2 Enable List
    • 4.9.5 Access
      • 4.9.5.1 Telnet
      • 4.9.5.2 SSH
      • 4.9.5.3 HTTP
      • 4.9.5.4 HTTPs
    • 4.9.6 Management Access Method
      • 4.9.6.1 Profile Rules
      • 4.9.6.2 Access Rules
    • 4.9.7 DHCP Snooping
      • 4.9.7.1 DHCP Snooping Overview
      • 4.9.7.2 Global Setting
      • 4.9.7.3 DHCP Snooping VLAN Setting
      • 4.9.7.4 Port Setting
      • 4.9.7.5 Statistics
      • 4.9.7.6 Database Agent
      • 4.9.7.7 Rate Limit
      • 4.9.7.8 Option82 Global Setting
      • 4.9.7.9 Option82 Port Setting
      • 4.9.7.10 Option82 Circuit-ID Setting
    • 4.9.8 Dynamic ARP Inspection
      • 4.9.8.1 Global Setting
      • 4.9.8.2 VLAN Setting
      • 4.9.8.3 Port Setting
      • 4.9.8.4 Statistics
      • 4.9.8.5 Rate Limit
    • 4.9.9 IP Source Guard
      • 4.9.9.1 Port Settings
      • 4.9.9.2 Binding Table
    • 4.9.10 Port Security
    • 4.9.11 DoS
      • 4.9.11.1 Global DoS Setting
      • 4.9.11.2 DoS Port Setting
    • 4.9.12 Storm Control
      • 4.9.12.1 Global Setting
      • 4.9.12.2 Port Setting
  • 4.10 ACL
    • 4.10.1 MAC-based ACL
    • 4.10.2 MAC-based ACE
    • 4.10.3 IPv4-based ACL
    • 4.10.4 IPv4-based ACE
    • 4.10.5 IPv6-based ACL
    • 4.10.6 IPv6-based ACE
    • 4.10.7 ACL Binding
  • 4.11 MAC Address Table
    • 4.11.1 Static MAC Setting
    • 4.11.2 MAC Filtering
    • 4.11.3 Dynamic Address Setting
    • 4.11.4 Dynamic Learned
  • 4.12 LLDP
    • 4.12.1 Link Layer Discovery Protocol
    • 4.12.2 LLDP Global Setting
    • 4.12.3 LLDP Port Setting
    • 4.12.4 LLDP Local Device
    • 4.12.5 LLDP Remove Device
    • 4.12.6 MED Network Policy
    • 4.12.7 MED Port Setting
    • 4.12.8 LLDP Overloading
    • 4.12.9 LLDP Statistics
  • 4.13 Diagnostics
    • 4.13.1 Cable Diagnostics
    • 4.13.2 Ping
    • 4.13.3 Ping Test
    • 4.13.4 IPv6 Ping Test
    • 4.13.5 Trace Router
  • 4.14 RMON
    • 4.14.1 RMON Statistics
    • 4.14.2 RMON Event
    • 4.14.3 RMON Event Log
    • 4.14.4 RMON Alarm
    • 4.14.5 RMON History
    • 4.14.6 RMON History Log
  • 4.15 Power over Ethernet
    • 4.15.1 Power over Ethernet Powered Device
    • 4.15.3 Power over Ethernet Configuration
    • 4.15.4 PoE Status
    • 4.15.5 PoE Schedule
    • 4.15.6 PoE Alive Check Configuration
  • 4.16 Maintenance
    • 4.16.1 Factory Default
    • 4.16.2 Reboot Switch
    • 4.16.3 Backup Manager
    • 4.16.4 Upgrade Manager
    • 4.16.5 Dual Image
• 5. SWITCH OPERATION
  • 5.1 Address Table
  • 5.2 Learning
  • 5.3 Forwarding & Filtering
  • 5.4 Store-and-Forward
  • 5.5 Auto-Negotiation
• 6. TROUBLESHOOTING
• APPENDIX A Switch's RJ45 Pin Assignments
  • A.1 1000Mbps, 1000BASE-T
  • A.2 10/100Mbps, 10/100BASE-TX