Ifs Atar1000 Series Install & Oper Instr

: InterLogix Ifs Atar1000 Series Install & Oper Instr ifs_atar1000_series_install_&_oper_instr library

Open the PDF directly: View PDF .
Page Count: 12

85395

• end.pdf
  • IFScontact85.pdf
    • Preface
      • Conventions used in this document
      • Safety terms and symbols
    • Product overview
      • Placement in a Digiplex system
    • Installation
      • DIP switch settings
      • Video cable connections
      • Control cable connections
      • Alarm contacts connections
      • Expanding to 32 video inputs
      • Expanding to eight monitor outputs
      • Power connection
    • Programming
      • Programming mode
      • Switcher programming
      • Site programming
      • Camera sequence programming
      • Group switching programming
      • Alarm contact programming
    • Battery removal/disposal
    • Contacting us
      • Online

P/N 1062858 • REV B • ISS 01JUL11

AT1000

AT1000-R3

AT1020

AT1020-R3

AT1025

AT1025-R3

AR1000

AR1000-R3

AR1030

AR1030-R3

IFS Fiber Module

Installation & Operation

AR2000

AR2000-R3

AR2020

AR2020-R3

AR2025

AR2025-R3

AR2010WDMA

AR2010WDMA-R3

AR2010WDMB

AR2010WDMB-R3

AT1000

AUDIO INPUT 3

2

1Audio Input

Audio Input

Ground

AR1000

AUDIO OUTPUT 6

5

4Audio Output

Audio Output

Ground

NOTE:

For an unbalanced connection, tie pin 2 to pin 3 and utilize pins 2 and 3 for the audio

input to the AT1000 Series module. Utalize pins 1 and 2 for the audio output from the

AR1000 Series module.

Audio Input

}

Balanced

Audio Input*

Blue

Green

Brown

Blue

Green

Brown

ifs International

Fiber

Systems

Incorporated

AT1000

FM AUDIO TRANSMITTER

12 VAC/12 VDC- 3

GRD- 2

12 VAC/12 VDC- 1

GRD- 3

AUDIO IN- 2

AUDIO IN- 1

POWER POWER

OPTICAL OUT

POWER

ifs International

Fiber

Systems

Incorporated

AR1000

FM AUDIO TRANSCEIVER

12 VAC/12 VDC- 3

GRD- 2

12 VAC/12 VDC- 1

GRD- 6

AUDIO OUT- 5

AUDIO OUT- 4

POWER POWER

OPTICAL IN

POWER

CARRIER

Audio Output

}

}

Simplex multimode

fiber optic cable

Audio Input

Audio Input

Ground Tie together

}

*Note: For unbalanced audio input, use the following setup

GRD- 3

AUDIO IN- 2

AUDIO IN- 1

GRD- 6

AUDIO OUT- 5

AUDIO OUT- 4 Audio Output

}

AR2000

AUDIO INPUT

NOTE:

For an unbalanced connection, tie pin 2 to pin 3 and utilize pins 1 and 2 for the audio

input to the AR2000 Series module. Utalize pins 4 and 5 for the audio output from the

AR2000 Series module.

6

5

4

3

2

1Audio Input

Audio Input

Ground

6

5

4

3

2

1

Audio Output

Audio Output

Ground

AUDIO OUTPUT

Balanced

Audio Input*

}Balanced

Audio Input*

Blue

Green

Brown

Blue

Green

Brown

ifs International

Fiber

Systems

Incorporated

AR2000

FM AUDIO TRANSCEIVER

12 VAC/12 VDC- 3

GRD- 2

12 VAC/12 VDC- 1

GRD- 6

AUDIO OUT- 5

AUDIO OUT- 4

GRD- 3

AUDIO IN- 2

AUDIO IN- 1

POWER POWER

OPTICAL OUT

OPTICAL IN

POWER

CARRIER

ifs International

Fiber

Systems

Incorporated

AR2000

FM AUDIO TRANSCEIVER

12 VAC/12 VDC- 3

GRD- 2

12 VAC/12 VDC- 1

GRD- 6

AUDIO OUT- 5

AUDIO OUT- 4

GRD- 3

AUDIO IN- 2

AUDIO IN- 1

POWER POWER

OPTICAL OUT

OPTICAL IN

POWER

CARRIER

Audio Output

}

}

Audio Output

}

Duplex multimode

fiber optic cable

Audio Input

Audio Input

Ground Tie together

}

*Note: For unbalanced audio input, use the following setup

AR1000/AR2000

B

A Carrier LED

Power LED

B

A

AT1000

A

APower LED

 NOTE: WITHOUT PROPER FIBER CONNECTION, LED's DO NOT INDICATE

CORRECT OPERATIONAL STATUS OF THE UNIT.

AR2000

AB

B

A Power Connector

Audio Connector

1 2 3 4 5 6 1 2 3

AT1000

AB

B

A Power Connector

Audio Input Connector

1 2 3 1 2 3

AR1000

AB

B

A Power Connector

Audio Output Connector

1 2 3 4 5 6

C

D

Optical Out

Optical In

CD

C

C

COptical Out

COptical In

PROPER MOUNTING METHOD

FOR THE AT/AR2000

1) Locate unit on solid at horizontal or vertical surface.

2) Position unit no closer than 24 inches from any power source or machinery.

3) Securely mount unit using (4) four mounting screws (not provided).

4) Attach power wires to terminal block, black wire to PIN 2 and black wire with

white stripe to PIN 1.

5) Plug power brick into approved 120v AC outlet.

6) Check power LED to insure device is properly powered, LED will illuminate green.

Comprehensive

Lifetime Warranty

(a) Seller warrants to the original End User that products and any

services furnished hereunder will be free from defects in material

and workmanship as of the date of delivery, and will conform to

Seller’s published technical specications. The foregoing shall

apply only to failures to meet said warranties which appear within

that period of time during which the Products are installed in their

original installation for the original End User and operator of such

Products; provided, however, that in the event of product discontin-

uance, warranty support is limited to ve (5) years from the

announcement of discontinuance. Notwithstanding the preceding

sentence, the duration of the warranty period for

products not

manufactured by Seller (e.g., ber optic cabling, test equipment,

power supplies or batteries) shall be the warranty period oered by

the original manufacturer, if any.

(b) The conditions of any tests shall be mutually agreed upon and

Seller shall be notied of, and may be represented at, all tests that

may be made. The warranties and remedies set forth herein are

conditioned upon (a) proper storage, installation, use and mainte-

nance, and conformance with any applicable recommendations of

Seller and (b) Buyer promptly notifying Seller of any defects and,

if required, promptly making the product available for correction.

(c) If any product or service fails to meet the foregoing warranties,

Seller shall thereupon correct any such failure either at its option,

(i) by repairing any defective or damaged product or parts of the

products, or (ii) by making available any necessary repaired or

replacement products or parts thereof. Any repaired or replacement

part or product shall be warranted for the remaining period of the

original Warranty Period. Seller shall pay, or credit Buyer for, the

cost of freight for all return shipments of products or parts to

Buyer. Where a failure cannot be corrected by Seller's reasonable

eorts, the parties will negotiate an equitable adjustment in price.

(d) The preceding paragraph sets forth the exclusive remedies for

claims based on defect in or failure of products or services,

whether the claim is in contract, indemnity, warranty, tort

(including Seller's negligence), strict liability or otherwise and

however instituted. Upon the expiration of the warranty period,

all such liability shall terminate and BUYER shall have a reason-

able time, within thirty days after the warranty period, to give

written notice of any defects which appeared during the warranty

period. The foregoing warranties are exclusive and in lieu of all

other warranties, whether written, oral, implied or statutory.

NO IMPLIED OR STATUTORY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR

PURPOSE SHALL APPLY. Seller does not warrant any

products or services of others which BUYER has designated.

NOTE: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to cor-

rect the interference at his own expense.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesirable operation.

Changes or modifications not expressly approved by International Fiber Systems, Inc. could void

the user’s authority to operate the equipment.

CLASS 1 LASER PRODUCT

(For purposes of IEC 60825-1)

Complies with FDA Performance Standard for Laser Products

Title 21

Code of Federal Regulations

Subchapter J

Contacting us

For help installing, operating, maintaining, and troubleshooting this product, refer to this document and any

other documentation provided. If you still have questions, contact us during business hours (Monday through

Friday, excluding holidays, between 5 a.m. and 5 p.m. Pacific Time).

Note: Be ready at the equipment before calling.

Online

Another great resource for assistance with your Interlogix product is our online publication library. To access

the library, go to our website at the following location:

http://www.interlogix.com/transmission1

Sales and support contact information

North

America

Toll-free: 855.286.8889 in the US, including Alaska and Hawaii;

Puerto Rico; Canada.

Outside the toll-free area: 503.885.5700.

E-mail: techsupport@interlogix.com

Europe Select Contact Us at www.utcfssecurityproducts.eu

Australia security.tech.support@interlogix.com.au

1. Many Interlogix documents are provided as PDFs (portable document format). To read these documents, you will

need Adobe Reader, which can be downloaded free from Adobe’s website at www.adobe.com.

Product Disassembly Instructions for WEEE

Per European Directive 2002/95/EC Waste Electrical and

Electronic Equipment

Required Tools:

One number 2 Phillips (crosstip) screwdriver.

One number 2 flat screwdriver.

For the enclosed box version:

1. Locate and remove box cover securement screws. Usually, but not limited to, at least

4 screws.

2. Lift off box top cover.

3. Locate and remove securement screws for printed circuit board.

4. If there are multiple boards to the assembly, continue removing securement screws

until none are left.

5. Lift off printed circuit board.

6. Disassembly of box version of product is complete.

For rack version:

1. Locate and remove securement screws for printed circuit board. Usually, but not

limited to, at least 4 screws.

2. If there are multiple boards to the assembly, continue removing securement screws

until none are left.

3. Lift off printed circuit board(s).

4. Disassembly of rack card version of product is complete.

Copyright © 2011 UTC Fire & Security. All rights reserved.

Trademarks and

patents Interlogix and IFS names and logos are trademarks of

UTC Fire & Security.

Other trade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacture

r

UTC Fire & Security Americas Corporation, Inc.

2955 Red Hill Avenue, Costa Mesa, CA 92626-5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification N4131

ACMA compliance Notice! This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may be

required to take adequate measures.

Canada This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

European Union

directives 2004/108/EC (EMC directive): Hereby, UTC Fire & Security

declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive

2004/108/EC.

2002/96/EC (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

Contact information For contact information, see www.interlogix.com.

---

---

---

---

---

---

---

---

---

---

---

---