Mvc 7100 B
2015-08-27
: InterLogix Mvc-7100 B mvc-7100_b library
Open the PDF directly: View PDF 
.
Page Count: 1
A
B
C
D
12345678
A
B
C
D
12345678
THIRD ANGLE PROJECTION
BOLT CIRCLE
2.73
69,2[ ]
BOLT CIRCLE
2.47
62,7[ ]
BOLT CIRCLE
2.26
57,4[ ]
3.26
82,7[ ]
0.65
[16,6]
2.41
[61,2]
1.72
[43,8]
0.60
[15,2]
0.68
[17,3]
1.36
[34,6]
1.18
[30,0]
1.18
[30,0]
1.75
44,5[ ]
1.07
[27,1]
1.07
[27,1]
1.20
[30,4]
1.20
[30,4]
0.69
[17,5]
0.62
[15,6]
1.23
[31,3]
1.38
[35,1]
3X 0.09
2,4[ ]
1.74
44,2[ ]
3.26
82,7[ ]
3X 0.17
4,4[ ]
0.80
[20,4]
1.23
[31,3]
0.62
[15,6]
1.07
[27,1]
1.07
[27,1]
1.73
[44,0]
3.24
[82,4]
15.0°
CAMERA CONNECTORS MATING CONNECTORS
CAMERA CONNECTOR PART NUMBER VENDOR CONNECTION NUMBER MATING CONNECTOR PART NUMBER VENDOR
MINI-FIT PLUG HOUSING, 3 POS. 39-01-4032 MOLEX J1 MINI-FIT RECEPTACLE HOUSING, 3 POS. 39-01-4030 MOLEX
FEMALE BNC PLUG, 75 OHM 31-10-75 or Equiv. AMP J2 MALE BNC PLUG, 75 OHM 031-71013-RFX AMP
MOLEX CONNECTION TABLE
PIN SIGNAL
1 Power +
2 Power -
3 Audio
ENGECN No.DATEREV
---A
----
----
----
RELEASE LEVEL:
B
REVISION:
B
DRAWING NUMBER:
MVC-7100_B
SHT:
1/1
SIZE:
A
SCALE:
1.000
FILE NAME:
MVC7100
FINISH:
MATERIAL:
DATE:
5-24-14
DRAWN BY:
PATR
This document is the property of Mobileview, UTC Building and Industrial Systems and contains
proprietary information of Mobileview. This document is loaned on the express condition
that neither it nor the information contained therein shall be disclosed to others without
the express written consent of Mobileview, and that the information shall be used by the
recipient only as approved expressly by Mobileview. This document shall be returned to
Mobileview upon its request. This document may be subject to certain restrictions under
U.S. export control laws and regulations.
Inch MM
.XX ± .010 .254
.XXX ± .005 .127
FRACTION ± .03 .762
ANGLES ± 1 DEG
SURFACE 63 1.6m
FINISH
UNLESS OTHERWISE NOTED
TITLE:
MVC-7100, MINI-DOME CAMERA
STANDARD TOLERANCE
NOTES:
1. PART NUMBERS:
MVC-7100-29-W "Mini-dome, 600TVL, 2.9mm lens, white, No IR"
MVC-7100-36-W "Mini-dome, 600TVL, 3.6mm lens, white, No IR"
MVC-7100-60-W "Mini-dome, 600TVL, 6.0mm lens, white, No IR"
MVC-7100-29-WI "Mini-dome, 600TVL, 2.9mm lens, white, with IR"
MVC-7100-36-WI "Mini-dome, 600TVL, 3.6mm lens, white, with IR"
MVC-7100-60-WI "Mini-dome, 600TVL, 6.0mm lens, white, with IR"
MVC-7200-29-W "Mini-dome, 600TVL, 2.9mm lens, white, with WDR"
MVC-7200-36-W "Mini-dome, 600TVL, 3.6mm lens, white, with WDR"
MVC-7200-60-W "Mini-dome, 600TVL, 6.0mm lens, white, with WDR"
2. OPERATION:
This assembly is used in conjunction with MobileView DVR
3. SPECIFICATIONS:
a. Operating Temperature: -10C to ~+50C (14F to +122F)
b. Operating Voltage: 12 VDC Nominal
c. 0.84 W (Without IR)
2.0 W (With IR)
d. Nominal Weight: 0.88 lbs (400 g)
4. Dimensions Shown are: Inch [mm]
5. INSTALLATION:
a. Assembly may be Mounted in Interior Location Only
b. Loosen Allen Screw to Remove Dome Cover
c. Drill Three Mounting Holes and One Cable Hole, as Shown on Drawing, in the Mounting Surface.
d. Feed Power/Video Cable Through Large Hole in Mounting Surface
f. Attach Camera to Mounting Surface Using Appropriate Hardware.
Use Backing Plates if Necessary for Stability.
FLUSH MOUNT: Do Not Use the Mounting Ring. Attach Camera Directly to Mounting Surface.
SURFACE MOUNT: Attach Mounting Ring to Mounting Surface, and Attach Camera to Mounting Ring.
SURFACE ANGLE MOUNT: Attach surface angle mount to mounting surface and then attach camera
to surface angle mount.
g. If Possible, Adjust Camera Angle/Position for Desired Field of View. See Camera Installation
Manual for Adjustment.
i. Reattach Dome Cover.
MOUNTING HOLES
SURFACE ANGLE MOUNT
SEE NOTE #5
SURFACE MOUNT RING
SEE NOTE #5
J1
J2
Molex Connector
See Detail A
See Molex Connection Table
CABLE LENGTH APPROX 9.0 INCHES
Connect Molex to DVR
Connect BNC to DVR
CONNECTION EXAMPLE
(MV_CBL_TYPE1 SHOWN)
MOUNTING HOLES
FLUSH MOUNT
SEE NOTE #5
MOUNTING HOLES
SURFACE MOUNT
SEE NOTE #5
0.75 APPROX.
[19.1]
MOUNTING RING
SEE NOTE #5
SURFACE ANGLE MOUNT RING
SEE NOTE #5
1.500SCALE
Pin 1
See Molex Connection Table
