Interex Mhl331D Users Manual Terex MHL 331 D

MHL331D to the manual 77024894-835a-4879-b45a-b70795acf1b4

: Interex Interex-Mhl331D-Users-Manual-578427 interex-mhl331d-users-manual-578427 interex pdf

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

TECHNICAL DATA AND INFORMATION
153 hp
48,502 - 51,809 lbs

MHL331D

RECYCLING MACHINE

up to 39.4 ft

TECHNICAL DATA MHL331 D
OPERATING WEIGHT
48,502 - 51,809 lbs

DIESEL ENGINE
MANUFACTURER AND MODEL

Deutz TCD 2012 L06 2V

DESIGN

6-cylinder inline

ENGINE CONTROL

EMR III

TYPE

4-stroke diesel, direct common fuel injection, turbocharged with charge air cooling

ENGINE OUTPUT

153 hp

NOMINAL SPEED

2,000 rpm

DISPLACEMENT

366 in3

COOLING SYSTEM

Liquid intercooling with temperature-controlled fan speed

EMISSION STANDARDS

EPA Tier III and COM III

AIR FILTER DESIGN

Two-stage filter

FUEL TANK CAPACITY

79 US gal

ELECTRICAL SYSTEM
OPERATING VOLTAGE

24 V

BATTERIES

2 x 12 V / 100 Ah / 760 A (in accordance with EN)

LIGHTING SET

1 x H3 spotlights on upper carriage, 1 x H3 spotlights on cabin floor,
turn signal and rear side-marker lamps

GENERATOR

13 kW DC generator with control, driven by V-belt direct from diesel engine

TRAVEL DRIVE
Hydrostatic drive through infinitely variable axial piston motor and directly mounted travel
brake valves, two-speed power shift gear, 4-wheel drive
TRAVEL SPEED, 1ST GEAR

max. 3.1 mph

TRAVEL SPEED, 2ND GEAR

max. 12.4 mph

GRADEABILITY

max. 50%

TURNING RADIUS

23.0 ft

SWING SYSTEM
RING GEAR

Internally toothed ball ring gear (double row)

DRIVE

Two-stage planetary gear with integrated multi-disc brake

UPPER CARRIAGE SWING SPEED

Infinitely variable from 0 - 8 rpm

PIVOT BRAKE

Electrically operated

UNDERCARRIAGE
FRONT AXLE

Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle: 28°

REAR AXLE

Oscillating planetary drive rear axle with integrated drum brake and
selectable oscillating axle lock

STABILIZERS

4-point stabilizers

TIRES

Solid rubber, elastic tires 8-fold 9.00 - 20

BRAKE SYSTEM

02

SERVICE BRAKE

Hydraulic single-circuit braking system acting on all four wheel pairs

PARKING BRAKE

Electrically operated disc brake at transmission, acting on both front and rear axle

HYDRAULIC SYSTEM
REXROTH mobile hydraulic system with load limit control, and fuel conserving power
demand control. Separate oil cooler, temperature-controlled fan speed.
Hydraulic oil filter: integrated in the oil tank; maintenance interval: up to 3,000 operating hours.
Central lubrication system.
MAX. PUMP CAPACITY

100 US gal/min

MAX. OPERATING PRESSURE

4,641 / 5,221 psi

HYDRAULIC OIL TANK

90 US gal

OPERATOR’S CAB
Cab: elastically supported, infinitely variable hydraulically height-adjustable with max. eye level
of 17 ft. Large windows for excellent view, windshield with pull-down sunblind that slides under
cab roof, visibility panel in cab roof, sliding window in cab door, steering column height and tilt
adjustable.
HEATING

Infinitely variable hot water heating with 3-speed fan, 4 adjustable defroster nozzles

OPERATOR’S SEAT

Air-cushioned comfort-seat with integrated headrest, safety-belt and lumbar support, seat-heating
with integrated a/c function optional. Seat position, seat inclination and seat cushion multiadjustable in line with position of armrests and pilot control units, allowing low fatigue operation.

MONITORING

Ergonomic instrument layout, glare resistant. Function monitoring; automatic warning and
storage of deviating operating conditions, e.g. filter pressure with warning indicator and
shutdown of pilot controls, warning indicator or shutdown of pilot controls when exceeding
hydraulic oil temperature limits.

AIR CONDITIONING

Automatic

SOUND POWER LEVEL

(guaranteed) in accordance with guideline 2000/14 EC
LW(A) = 102 dB(A)

SAFETY INSTALLATIONS
For crane operations in accordance with EN 474-5.
Cab protection by close proximity range limiter.

OFFICIAL HOMOLOGATION
Certification according to CE-regulations.

03

EQUIPMENT MHL331 D
ENGINE

SERIES

CAB

SERIES

OPTION

Exhaust gas turbocharger

l

Lift-up skylight in cabin roof

l

Intercooling

l

l

Direct electronic fuel injection/
Common Rail

Air cushioned operator‘s seat with
headrest, safety belt and lumbar support

l

FOPS protective grating (roof)

l

Automatic idle

l

Front/roof protective grating

l

Interface for engine diagnosis

l

Hinged front windshield

Temperature-controlled fan drive

l

LEXAN front window glass

UNDERCARRIAGE

SERIES

2-speed power-shift transmission

l

4-point stabilizers

l

4-pt. stabiliziers, individually controllable
Outrigger cylinders with integrated
two-way check valves

OPTION

l

l
l

High strength glass, front and top

l

Cab elevation system, height adjustable

l

Air conditioning

l

Steering column, height and tilt adjustable

l

Multi-function color display

l

l

Fire extinguisher, dry powder

All-wheel drive

l

Radio / CD player

l

Piston rod protection on the outrigger
cylinders

Rotating beacon

l

l

Sliding window in cab door

l

Outrigger plates 19.7 x 13.8 in

l

Safety glass

l

Rear axle oscillating lock

l

Seat heating with integrated a/c function

l

l

Blade in addition to 4-pt. stabilizers

l

Windscreen washer system

Special paint

l

Dust protection system

l

Pressurized cabin system

l

Drum brakes

l

Tool box

l

All-wheel steering

UPPERCARRIAGE

l
SERIES

OPTION

EQUIPMENT

l

SERIES

Floodlights attached to cab floor

l

Floodlights, mounted to superstructure

l

Electrical refueling pump

l

Floodlight, stick mounted

Lighting protection

l

Close proximity range limiter for stick

l

l

l

Lockable cleaning access openings on
radiator

Coolant and hydraulic oil level
monitoring system

l

Hose rupture protection for lift cylinder

l

Separate radiator system for ambient
temperatures up to 122° F (50° C)

l

l

Hose rupture protection for stick cylinder
Stick shock protection

l

Lubrication of the grab suspension by
central lubrication system

l

Separate oil cooler with temperaturecontrolled fan drive

l

Automatic central lubrication system

l
l

Quick-drain valve for fuel tank
(delivered in tool box)

l

Quick-drain valve on hydraulic oil tank

l

Quick-drain valve on radiator

l

Quick-drain valve on engine oil-pan

l

Reversible fan for radiator and
hydraulic oil cooler

l

OPTION

l

Maintenance hood, actuated by gas strut,
with mechanical locking device

Special paint

04

OPTION

Overload protection/ shutdown

l

XENON floodlight on stick

l

XENON-floodlight on superstructure

l

XENON floodlight on cab roof

l

Filter system for attachments

l

DIMENSIONS

49.7

88.6

125.8
134.4
with protective grating for cab roof

MHL331 D

102.2
97.8

100.4

98.4
190.2

55.1
96.5
98.4
107.9
144.1
157.9

Dimensions (in)

MHL331 D
Transport dimensions
D

E

B

C

A

DIMENSIONS

REACH 35.1 ft
(MULTI-PURPOSE STICK)

REACH 36.1 ft

REACH 39.4 ft

A

393.7 in

391.7 in

389.8 in

B

202.4 in

206.7 in

168.5 in

C

51.2 in

51.2 in

51.2 in

D

125.8 in / *134.4 in

125.8 in / *134.4 in

125.8 in / *134.4 in

E

106.3 in

104.3 in

122.0 in

* with protective grating for cab roof

05

WORKING RANGES/LIFTING CAPACITIES MHL331 D
40

Reach 36.1 ft
with stick
Work equipment:
Box-type boom 21.3 ft;
Stick 14.4 ft;
Cactus grab

30

20

10

0

Center of rotation

-10

	

40			

30			

20			

10			

0

3Reach in ft

06

HEIGHT

UNDERCARRIAGE

ft

STABILIZERS

35

30

25

20

15

10

5

0

-5

REACH ft
15

20

non supported

(11,460)

4-pt. supported

12,390* (12,390*)

25

30

non supported

(11,720)

(8,140)

4-pt. supported

14,050* (14,050*)

12,380* (12,380*)

non supported

(11,660)

(8,160)

(6,000)

4-pt. supported

14,120* (14,120*)

12,720 (12,840*)

9,430 (10,910*)

non supported

(11,330)

(7,980)

(5,950)

4-pt. supported

15,060* (15,060*)

12,530 (13,290*)

9,370 (11,570)

35

non supported

(16,710)

(10,750)

(7,670)

(5,790)

(4,500)

4-pt. supported

21,180* (21,180*)

16,770* (16,770*)

12,180 (14,170*)

9,200 (11,390)

7,240 (8,960)

non supported

(15,110)

(10,020)

(7,280)

(5,580)

(4,410)

4-pt. supported

25,750* (25,750*)

16,490 (18,860*)

11,760 (14,710)

8.980 (11,150)

7,140 (8,850)

non supported

(13,740)

(9,340)

(6,910)

(5,370)

(4,320)

4-pt. supported

22,310* (22,310*)

15,720 (20,170)

11,350 (14,280)

8,750 (10,920)

7,040 (8,750)

non supported

(13,170)

(8,960)

(6,690)

(5,240)

(4,260)

4-pt. supported

15,440* (15,440*)

6,970 (8,670)

15,210 (19,620)

11,050 (13,960)

8,590 (10,740)

non supported

(8,710)

(6,500)

(5,150)

4-pt. supported

14,990 (19,380)

10,900 (13,800)

8,510 (10,660)

RECOMMENDED ATTACHMENTS
LIFT HOOK

22,046 lbs

TEREX FUCHS
CACTUS GRAB 0.52 yd3

Open or half-closed tines

TEREX® FUCHS
CACTUS GRAB 0.78 yd3

Open or half-closed tines

GRAB FOR LIGHTWEIGHT
MATERIALS 1.0 yd3

Loose goods density up to
2,360 lb/yd3

MAGNET SYSTEM

Terex® Fuchs magnetic plate

®

Capacity values are stated in (lbs). The pump pressure
is 5,221 psi. The values, in accordance with ISO 10567,
amount to 75% of the static tipping load or 87 % of the
hydraulic lifting force (marked *). They apply to slewing
operations through 360° on a firm and level surface.
Values in brackets apply to the longitudinal direction of
the undercarriage. “Non-supported” values only apply
when the load is hoisted above the front or rear axle.
The weight of the attached hoisting equipment (grab,
coupler, magnet, lift hook, etc.) must be deducted from
the capacity values. In accordance with CE guidelines,
hose-rupture protection valves on the lift cylinders
and an overload warning device are required for crane
operations.

07

WORKING RANGES/LIFTING CAPACITIES MHL331 D
Reach 39.4 ft
with stick

40

Work equipment:
Box-type boom 21.3 ft;
Stick 17.9 ft;
Cactus grab
30

20

10

0

Center of rotation

-10

-20
		

40			

30			

20			

10			

0

3Reach in ft

08	

HEIGHT

UNDERCARRIAGE

ft

STABILIZERS

35

30

25

20

15

10

5

0

-5

-10

REACH ft
15

20

25

non supported

(8,330)

4-pt. supported

9,590* (9,590*)

30

35

non supported

(8,500)

(6,200)

4-pt. supported

11,320* (11,320*)

8,960* (8,960*)

non supported

(8,470)

(6,230)

(4,690)

4-pt. supported

11,330* (11,330*)

9,690 (10,720*)

6,930* (6,930*)

non supported

(8,270)

(6,120)

(4,680)

4-pt. supported

11,850* (11,850*)

9,580 (10,960*)

7,440 (9,090)

non supported

(11,260)

(7,930)

(5,930)

(4,580)

4-pt. supported

14,660* (14,660*)

12,500 (12,820*)

9,370 (11,470*)

7,340 (8,990)

40

non supported

(16,190)

(10,470)

(7,500)

(5,680)

(4,440)

(3,500)

4-pt. supported

22,080* (22,080*)

16,950* (16,950*)

12,010 (14,040*)

9,100 (11,190)

7,190 (8,830)

5,780 (6,880*)

non supported

(14,450)

(9,650)

(7,050)

(5,410)

(4,300)

(3,500)

4-pt. supported

25,570 (26,780*)

16,090 (19,210*)

15,510 (14,330)

8,810 (10,890)

7,030 (8,670)

5,780 (6,880*)

non supported

(13,460)

(9,110)

(6,730)

(5,230)

(4,190)

4-pt. supported

20,400* (20,400*)

15,350 (19,580)

11,090 (13,890)

8,570 (10,630)

6,900 (8,530)

non supported

(12,790)

(8,630)

(6,420)

(5,040)

(4,100)

4-pt. supported

16,480* (16,480*)

14,920 (19,120)

10,820 (13,600)

8,410 (10,460)

6,820 (8,450)

non supported

(6,320)

4-pt. supported

10,710 (13,490)

RECOMMENDED ATTACHMENTS
LIFT HOOK

22,046 lbs

TEREX FUCHS
CACTUS GRAB 0.52 yd3

Open or half-closed tines

GRAB FOR LIGHTWEIGHT
MATERIALS 0.78 yd3

Loose goods density up to
2,360 lb/yd3

MAGNET SYSTEM

Terex® Fuchs magnetic plate

®

Capacity values are stated in (lbs). The pump pressure
is 5,221 psi. The values, in accordance with ISO 10567,
amount to 75% of the static tipping load or 87 % of the
hydraulic lifting force (marked *). They apply to slewing
operations through 360° on a firm and level surface.
Values in brackets apply to the longitudinal direction of
the undercarriage. “Non-supported” values only apply
when the load is hoisted above the front or rear axle.
The weight of the attached hoisting equipment (grab,
coupler, magnet, lift hook, etc.) must be deducted from
the capacity values. In accordance with CE guidelines,
hose-rupture protection valves on the lift cylinders
and an overload warning device are required for crane
operations.

09

WORKING RANGES/LIFTING CAPACITIES MHL331 D

Reach 35.1 ft
with multi-purpose
stick

40

Work equipment:
Box-type boom 21.3 ft;
Stick 13.1 ft;
Sorting grab
30

20

10

0

Center of rotation

-10

	

40			

30			

20			

10			

0

3Reach in ft

10

HEIGHT

UNDERCARRIAGE

ft

STABILIZERS

30

25

20

15

10

5

0

-5

REACH ft
15

20

25

non supported

(11,070)

(7,500)

30

4-pt. supported

14,210* (14,210*)

11,120* (11,120*)

non supported

(11,010)

(7,550)

(5,390)

4-pt. supported

14,220* (14,220*)

12,100 (12,720*)

8,820 (8,860*)

non supported

(17,060)

(10,650)

(7,370)

(5,360)

4-pt. supported

18,330* (18,330*)

15,140* (15,140*)

11,910 (13,120*)

8,790 (10,880)

non supported

(15,780)

(10,040)

(7,050)

(5,210)

4-pt. supported

21,810* (21,810*)

16,590 (16,780*)

11,560 (13,920*)

8,620 (10,710)

35

non supported

(14,120)

(9,300)

(6,670)

(5,010)

(3,380)

4-pt. supported

25,240 (26,150*)

15,740 (18,720*)

11,130 (13,950)

8,410 (10,480)

6,610 (8,240)

non supported

(12,850)

(8,650)

(6,310)

(4,820)

(3,800)

4-pt. supported

16,910* (16,910*)

15,000 (19,230)

10,740 (13,530)

8,200 (10,260)

6,520 (8,150)

non supported

(12,410)

(8,310)

(6,100)

(4,700)

4-pt. supported

13,930* (13,930*)

14,550 (18,750)

10,460 (13,240)

8,050 (10,110)

non supported

(5,960)

4-pt. supported

10,350 (13,120)

Capacity values are stated in (lbs). The pump pressure is 5,221 psi. The values, in
accordance with ISO 10567, amount to 75% of the static tipping load or 87% of the
hydraulic lifting force (marked *). They apply to slewing operations through 360° on
a firm and level surface. Values in brackets apply to the longitudinal direction of the
undercarriage. “Non-supported” values only apply when the load is hoisted above
the front or rear axle. The weight of the attached hoisting equipment (grab, coupler,
magnet, lift hook, etc.) must be deducted from the capacity values. In accordance with
CE guidelines, hose-rupture protection valves on the lift cylinders and an overload
warning device are required for crane operations.

11

Terex Construction Americas
8800 Rostin Road
Southaven, MS 38671 - USA
Tel.: (662) 393-1800 Fax: (662) 393-1700
Web: www.terex.com

PURPOSE

BUILT

SIMPLE TO OPERATE.
VERSATILE IN USE.
MHL331 D. An efficient all-around perfomer.
With its versatility and quick maneuvering speed, the MHL331 D really
gets the recycling business moving. The robust undercarriage provides
a stable base when loads need to be moved with maxium reach of
up to 39.4 ft. In such situations it is essential that neither speed nor
precision is compromised; the slewing motor and gear are designed
with productivity in mind and the lift and stick cylinders are fitted with
special end-cushioning for enhanced performance.
The MHL331 D incorporates efficient cooling technology. The
separate cooling systems, consisting of a hydrostatically driven fan
for the oil cooler and an engine-driven fan for liquid intercooling,
combine excellent cooling power with quiet performance, enabling the
machine to be used at ambient temperatures of up to 122° F (50°C).
Optional features are available for use indoors or in harsh operating
environments, including particulate filters and a pressurized cabin
system if required.

The clean and quiet 153 hp turbo diesel
engine meets Tier III emissions standards;
noise and emissions are minimal. The
operator has excellent visibility and control,
aided by the height-adjustable cab with
large windows and a modern multi-function
color monitor which makes comprehensive
operating information available at a glance.
Ergonomically arranged controls, airconditioning, and a comfortable easily
adjustable seat are among the standard
in-cab features.

Effective date: April 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in
this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure
to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only
warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty,
express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the
USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Copyright
© 2009 Terex Corporation.
MHL331D-N.A. .5K 0409 Part Number 127608



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Page Layout                     : TwoColumnRight
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:16b26666-56da-45e8-9747-4799d766a7db
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Keywords                        : North American Specifications
Create Date                     : 2009:04:17 15:13:30-05:00
Modify Date                     : 2009:04:17 16:33:39-05:00
Metadata Date                   : 2009:04:17 16:33:39-05:00
Creator Tool                    : Adobe InDesign CS4 (6.0.1)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 19074 bytes, use -b option to extract)
Instance ID                     : uuid:9ee8ee6b-8df2-9243-a4b8-0ecbdb8164ba
Document ID                     : xmp.did:C8FB7B49C529DE11AEF6AB1B06AE64DE
Rendition Class                 : proof:pdf
Original Document ID            : adobe:docid:indd:ed495a3c-0e83-11de-a7ab-e938a5d7e0a5
Derived From Instance ID        : xmp.iid:C7FB7B49C529DE11AEF6AB1B06AE64DE
Derived From Document ID        : xmp.did:F44C9C98DD25DE1196A5E315589DE6C3
Derived From Original Document ID: adobe:docid:indd:ed495a3c-0e83-11de-a7ab-e938a5d7e0a5
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:5614154BC322DE11BE2EABC01C688E4A, xmp.iid:5714154BC322DE11BE2EABC01C688E4A, xmp.iid:5A14154BC322DE11BE2EABC01C688E4A, xmp.iid:5C14154BC322DE11BE2EABC01C688E4A, xmp.iid:5D14154BC322DE11BE2EABC01C688E4A, xmp.iid:5E14154BC322DE11BE2EABC01C688E4A, xmp.iid:5F14154BC322DE11BE2EABC01C688E4A, xmp.iid:A338BA8ED622DE11BE2EABC01C688E4A, xmp.iid:A438BA8ED622DE11BE2EABC01C688E4A, xmp.iid:A538BA8ED622DE11BE2EABC01C688E4A, xmp.iid:C9BC7840E222DE11BE2EABC01C688E4A, xmp.iid:18ABBB98A723DE11BC1CA66C5A448D85, xmp.iid:19ABBB98A723DE11BC1CA66C5A448D85, xmp.iid:92E78E8BB623DE11BC1CA66C5A448D85, xmp.iid:BB7298266324DE11855EE8380FD5819A, xmp.iid:BC7298266324DE11855EE8380FD5819A, xmp.iid:BD7298266324DE11855EE8380FD5819A, xmp.iid:BE7298266324DE11855EE8380FD5819A, xmp.iid:46FA56E21725DE11A877EAA91FC68A71, xmp.iid:F34C9C98DD25DE1196A5E315589DE6C3, xmp.iid:F44C9C98DD25DE1196A5E315589DE6C3, xmp.iid:0FAC11EA0729DE11A78EDA893B2F4175, xmp.iid:10AC11EA0729DE11A78EDA893B2F4175, xmp.iid:11AC11EA0729DE11A78EDA893B2F4175, xmp.iid:B0D34AF12329DE11A78EDA893B2F4175, xmp.iid:B1D34AF12329DE11A78EDA893B2F4175, xmp.iid:B2D34AF12329DE11A78EDA893B2F4175, xmp.iid:5FB94CA0BF29DE118768B2C91B1727B1, xmp.iid:62B94CA0BF29DE118768B2C91B1727B1, xmp.iid:C24C6F30C129DE118768B2C91B1727B1, xmp.iid:C34C6F30C129DE118768B2C91B1727B1, xmp.iid:C5FB7B49C529DE11AEF6AB1B06AE64DE, xmp.iid:C6FB7B49C529DE11AEF6AB1B06AE64DE, xmp.iid:C7FB7B49C529DE11AEF6AB1B06AE64DE, xmp.iid:C8FB7B49C529DE11AEF6AB1B06AE64DE, xmp.iid:0080117407206811BD35A2F6781A1829, xmp.iid:6E1C68E90D206811BD35A2F6781A1829, xmp.iid:6F1C68E90D206811BD35A2F6781A1829, xmp.iid:FFF9B9BB22206811BD35A2F6781A1829, xmp.iid:00FAB9BB22206811BD35A2F6781A1829, xmp.iid:01FAB9BB22206811BD35A2F6781A1829, xmp.iid:02FAB9BB22206811BD35A2F6781A1829, xmp.iid:29E6C8C02C206811BD35A2F6781A1829
History When                    : 2009:04:06 10:55:04-05:00, 2009:04:06 10:55:04-05:00, 2009:04:06 11:05:32-05:00, 2009:04:06 11:24:37-05:00, 2009:04:06 11:29:15-05:00, 2009:04:06 13:03:21-05:00, 2009:04:06 13:05:55-05:00, 2009:04:06 13:12:58-05:00, 2009:04:06 13:21:37-05:00, 2009:04:06 13:47:41-05:00, 2009:04:06 14:39:37-05:00, 2009:04:07 14:27:57-05:00, 2009:04:07 14:32:56-05:00, 2009:04:07 16:26:06-05:00, 2009:04:08 15:32:08-05:00, 2009:04:08 15:32:27-05:00, 2009:04:08 15:32:27-05:00, 2009:04:08 16:22:42-05:00, 2009:04:09 13:04:31-05:00, 2009:04:10 10:37-05:00, 2009:04:10 10:37:01-05:00, 2009:04:14 10:32:36-05:00, 2009:04:14 10:40:27-05:00, 2009:04:14 10:42:04-05:00, 2009:04:14 14:27:57-05:00, 2009:04:14 14:38:06-05:00, 2009:04:14 14:41:15-05:00, 2009:04:15 08:19:44-05:00, 2009:04:15 08:20:44-05:00, 2009:04:15 08:47:37-05:00, 2009:04:15 08:52:15-05:00, 2009:04:15 08:56:58-05:00, 2009:04:15 09:01:08-05:00, 2009:04:15 09:03:31-05:00, 2009:04:15 09:03:32-05:00, 2009:04:17 11:00:58-05:00, 2009:04:17 11:01:28-05:00, 2009:04:17 11:06:21-05:00, 2009:04:17 14:25:03-05:00, 2009:04:17 14:27:07-05:00, 2009:04:17 14:30:52-05:00, 2009:04:17 14:35:26-05:00, 2009:04:17 15:11:55-05:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 314.00, 314.00, 314.00, 314.00, 300.00, 300.00, 300.00, 304.80, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Y Resolution    : 314.00, 314.00, 314.00, 314.00, 300.00, 300.00, 300.00, 304.80, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:76BF2EFF2A29DE11948C86689BC1EBAA, uuid:F115B77B2829DE11948C86689BC1EBAA, uuid:EAC255358CFC11DBA6A3E9EA0418C1DE, uuid:4EC7A1E187E611DBA88E9F51078B6E0A, uuid:1C41AF66F33311DCA856AC2FE187E3C0, uuid:B49F8C24F5B211DCBC72AB3B837066DA, uuid:B5A856434CAD11DB98DDA30A5E07C35B, uuid:4DAFD74EE77F11DC99F587A6BCE0F7EA, uuid:79B4F1C7EA5E11DAA47D94523F848302, uuid:96A1A50FF2AA11DCAAD8FFC7D6367D57, uuid:B49A7564F2B711DCAAD8FFC7D6367D57, uuid:C8D1002C756411DB9044AEC0F5247C36, uuid:C8D10030756411DB9044AEC0F5247C36, uuid:031002F0F1DE11DC92A4D305BA940CA9, uuid:7CBF2EFF2A29DE11948C86689BC1EBAA
Manifest Reference Document ID  : uuid:BF94BC5C7824DE1198D0D969B7104B83, uuid:10D7013A0829DE11948C86689BC1EBAA, uuid:093C177987BF11DBA88E9F51078B6E0A, uuid:D76A7C8587BF11DBA88E9F51078B6E0A, uuid:710E56694C9111DB98DDA30A5E07C35B, uuid:929EC455420611DCA2E1B44F33F6F041, uuid:B5A856424CAD11DB98DDA30A5E07C35B, uuid:188EA26B05C411DA901C8469CC42C3F0, uuid:85D17DC2D07011DA88C0D4BDF28CF694, uuid:3FF30F8F748B11DB9173CC3C321CD469, uuid:AC5AE51E716011DB9173CC3C321CD469, uuid:020D043A754A11DB9044AEC0F5247C36, uuid:0970E86F74AC11DB9173CC3C321CD469, uuid:0FCBABAFF1C911DC92A4D305BA940CA9, uuid:8E5D2A1D0929DE11948C86689BC1EBAA
Doc Change Count                : 1001
Format                          : application/pdf
Title                           : Terex MHL 331 D
Creator                         : Terex Corporation
Author                          : Terex Corporation

EXIF Metadata provided by EXIF.tools