Concord 5” TouchScreen Installation Sheet 466 5410 Revd 5 Touch Screen Install

2018-05-08

: Interlogix 466-5410-Revd-Concord-5-Touch-Screen-Install-Sheet 466-5410-revd-concord-5-touch-screen-install-sheet library

Open the PDF directly: View PDF .
Page Count: 8

Concord 5” TouchScreen Installation Sheet

Description

Concord 5” TouchScreen, model 60-924-3-C4TS5, features a

5-inch color LCD screen with a graphical user interface

designed to control basic functionality of Concord 4, version

4.5 or later.

Multiple touch screens can be added to each Concord panel.

An internal speaker provides system status beeps for trouble

and alarm indications.

The touch screen provides a convenient option for the

following system operations:

• Easily obtain home/building status using At-A-Glance

(AAG) sensor status.

• Arm the system (doors, windows, motion sensors, and

property).

• Disarm the system.

• Activate a panic alarm to call the central monitoring station

in a non-medical emergency.

Equipment

• Alphanumeric keypad (for panel and end user

programming)

• 4-conductor, 18 to 22-gauge wire

• #6 screws and anchors (included)

• Super bus power supply (optional), PN 600-1019

Tools

• 2.5mm flat-blade screwdriver

• #2 Phillips screwdriver

• Drill and drill bits for opening wallboard (3/16- and 1/2-inch

bits)

Safety information

IMPORTANT SAFETY INFORMATION. READ ENCLOSED

WARNINGS AND SAFETY INFORMATION.

WARNING! Disconnect panel power before servicing.

CAUTION: Use static electricity precautions when

handling electronic components.

Installation guidelines

The touch screen can be the primary interface to the panel or it

can act as auxiliary interface working in conjunction with

alphanumeric keypads (such as Interlogix P/N 600-1070-E or

60-983).

• The touch screen is not listed to UL Fire Standards and

may not be programmed for use with a Fire System in

California per CSFM Regulations.

• Mount the touch screen in an environmentally-controlled

area (32°F to 120°F/0°C to 49°C).

• Do not exceed the maximum available power given in the

panel. Refer to the total system power and guideline

section in Concord installation instructions. See Table 1

for touch screen power usage and Table 2 for maximum

wire length between touch screen and panel.

• Depending on system loading, multiple touch screens can

be installed on a Concord 4 system. See the examples in

Table 3 and Table 4.

Table 1: Touch Screen Power Usage

Current (mA)

Conditions

400

Maximum alarm current with the buzzer sounding and

the touch screen illuminated from a button press

100

Typical operation

Power saving mode (no panel AC power)

Table 2: Maximum SuperBus Lengths

Wire gauge

(shielded or

unshielded)

Max. touch screen wire length between touch

screen and panel

120 feet

2 / 8 P/N 466-5410 (EN) • REV D • ISS 19MAR18

Table 3: Example – Basic Concord 4 system with two Concord 5”

TouchScreens and one alphanumeric keypad

Device

Part #

Number

used

Alarm

current

draw

Available

Power

Concord 4

1000 mA

Concord 5”

Touch Screen

60-924-3-

C4TS5

800 mA

ATP 1000

60-983

110 mA

Total

90 mA

remaining

Table 4: Example - Concord 4 system with four Concord 5”

TouchScreens, one ADC modem, and one panel voice module

(Note: SB 2000 power supply is needed in this configuration)

Device

Part #

Number

used

Alarm

current

draw

Available

Power

Concord 4

1000 mA

SB2000 voice

only module

60-836

600 mA

Concord 5”

Touch Screen

60-924-3-

C4TS

400 mA

0 mA

remaining

SB2000

Power Supply

600-1019

2000 mA

ADC LTE

Modem

600-1053-

LTEAT

125 mA

Concord 5”

Touch Screen

60-924-3-

C4TS5

1600 mA

Total

875 mA

remaining

Preparation

To begin

1. Separate the touch screen and the mounting base from

the preassembled desktop stand. Remove the desktop

stand by holding the touch screen unit with one hand and

prying the desktop stand at the removal tab marking until it

separates (Figure 1) with the other.

Figure 1: Desktop stand removal

2. Remove the touch screen from the mounting base

pressing the opening button on the bottom of the touch

screen (as shown in Figure 2). In case the parts stick to

each other, try to separate them by inserting a small

screwdriver into the opening slot beneath the protruding

opening button (Figure 2).

Figure 2: Opening slot

Wall mounting

1. If the unit is to be installed and used on surface utilizing

the desktop stand, skip to step 9.

Wall mounting uses only the mounting base; the desktop

stand is not used.

2. Hold the base on the wall at the desired mounting location

and mark the mounting holes and bus wire drop.

3. At the mounting hole locations, drill 3/16-inch holes into

the wall for plastic anchors.

4. At the bus wire drop opening, drill a 1/2-inch hole into the

wall.

5. Push the two plastic anchors into the drilled holes and

tighten screws within a quarter-inch of the anchors.

6. Feed the bus wiring through the backside of the bus wire

drop in the mounting base (Figures 3 and 4).

Figure 3: Wire access in mounting base

Opening

button

Mounting

hole Mounting

hole

Mounting

base

Bus wire

drop opening

P/N 466-5410 (EN) • REV D • ISS 19MAR18 3 / 8

Figure 4: Bus Wire Routing Wall Mount

7. Hang the base using the screws, level the base, and

tighten the screws.

8. Feed any extra bus wire back into wall. Bus wires should

not protrude outside of the bus wire drop opening.

Surface, desktop mounting

If the unit is to be wall mounted, skip to step 11.

9. Feed the bus wiring through the desktop stand from the

backside forward, and then feed the wire through the

backside of the bus wire drop in the mounting base (see

Figure 5).

Figure 5: Bus Wire Routing Surface Desktop Mount

10. Reattach the desktop stand to the mounting base.

Wiring and final assembly

11. For either mounting, now connect the bus wires to the 4-

position terminal block (Figure 6).

Figure 6: Connecting the touch screen

12. To reattach the touch screen to the mounting base (which

is mounted either to a wall or is attached to the desktop

stand sitting on a surface), angle the top of the touch

screen into the tab hooks on the top of the mounting base

and swing the bottom of the touch screen into the lower

part of the mounting base until you hear an audible click.

Note: If necessary, use a soft cloth to clear smudges on

the touch screen. Do not use glass cleaner.

Power up and bus communication

Follow the steps below for powering up the panel and for

verifying that the TouchScreen and other products like an

alphanumeric keypad are properly communicating with each

other.

Note: On power up, the panel scans the bus for connected

devices, assigns a unit number to each bus device, and

automatically adds the device ID number of each bus device.

1. Verify that all wiring between the panel, touch screen, and

alphanumeric keypad is correct.

2. Connect the panel battery and restore AC power.

The alphanumeric keypad briefly shows SCANNING BUS

DEVICES, then displays date and time.

Note: Emergency button program changes can only be

completed within two minutes of initial power up of touch

screen.

Installer Programming

The Concord 5” TouchScreen has a keypad emulation mode

that allows installer/dealer code access to panel programming

and configuration.

To access, press the Settings icon on the Main screen and

the Settings screen appears.

Terminal

block

Wires

123

+12V (Red)

BUS-A (Green)

BUS-B (White)

GND (Black)

4 / 8 P/N 466-5410 (EN) • REV D • ISS 19MAR18

Press and hold the Enter button for approximately five

seconds. The following screen will appear:

The emulated keypad works and functions the same as the

600-1070-E keypad. To enter programming mode press 8,

followed by a valid installer or master code, 0, 0.

For additional details on programming with the touchscreen,

see Concord 5 in TouchScreen Quick Operation Guide.

To exit programming, press the “Exit “ button or press and hold

the top white bar where info is displayed.

Verifying touch screen bus enrollment and panel

programming touch screen options

Enter programming emulation mode as described above. For

more information on alphanumeric touch pad operation, refer

to the Concord 4 Installation Manual.

1. Go to the Bus Device Programming section in Concord

(System Programming / Security / Accessory Modules /

Bus Devices (shortcut 10,000 for unit ID 0).

The display shows the lowest device address and it’s ID.

This example shows what a device address display may

look like:

UNIT - ID

02110185*

* The 8-digit SuperBus ID number is also located on a

label on the back of the alphanumeric keypad.

2. Cycle through all bus device addresses until the

alphanumeric keypad appears.

3. To program the following touch screen options, choose the

touch screen bus device address.

Change ID

With this menu, change the bus device ID number when

replacing a defective bus device.

To change a device ID:

1. With the display showing the desired bus device, press #,

The display shows DEVICE ID (current ID).

2. Enter the ID of the new bus device.

The display flashes the entered selection. Press # and the

display shows the new setting.

3. Exit programming mode.

4. Remove AC and battery power from the panel.

5. Replace the defective bus device with a new one.

6. Apply AC and battery power to the panel.

Partition assignment

With this menu, assign bus devices to work in the desired

partition.

To assign bus devices to partitions:

1. With the display showing the desired bus device, press #.

2. Press A or B until the display shows DEVICE PTN and

then press #. The display shows PARTITION ASSIGN.

3. Press 1 to 6 to select the desired partition.

The display flashes the entered selection.

4. Press # and the display shows the new setting.

Status beeps

Option not used with touch screen. Touch screen status beeps

can be changed in the touch screen settings menu.

Key beeps

Option not used with touch screen. Touch screen key beeps

can be changed in the touch screen settings menu.

Panel sensor text programming guidelines

Programming for touch screen At-A-Glance (AAG) icons

For best results, do not program sensor names that contain a

combination of the words Door, Window, and/or Motion.

The designator words Door, Window, or Motion should be

programmed within the first three words of the sensor text

sequence. If not, the wrong AAG association may occur.

Door - Sensor names must contain “Door” (item number 50).

When programming a name for a sensor, enter 50 and the

word Door is added to the text. These sensors should be a

sensor group that requires a restoral.

Window - Sensor names must contain “Window” (item number

183). When programming a name for a sensor, enter 183 and

the word Window is added to the text. These sensors should

be a sensor group that requires a restoral.

Motion - Sensor names must contain “Motion” (item number

119). When programming a name for a sensor, enter 119 and

the word Motion is added to the text. These sensors should be

a sensor group that does not require a restoral.

Property - Any sensor that does not contain the words Door,

Window, or Motion. They may be a restoral or non-restoral

sensor.

If a sensor contains the AAG keyword of Door, Window, or

Motion, but the sensor appears in the Property AAG when

tripped, the name of the sensor is too long. The AAG keyword

needs to be moved closer to the start of the sensor name.

P/N 466-5410 (EN) • REV D • ISS 19MAR18 5 / 8

TouchScreen setting options

Touch the Settings icon on the Home screen and the

Settings screen appears.

Setting options

With the Setting options, adjust the touch screen’s features.

Typical status indicators (excluding light screen):

• Gold - A button is selected.

• Blue - Buttons not selected.

Use the scroll bar to see all of the options (below):

Event History - Touch the Related Show button to view

system events.

Direct Bypass - Touch the Related button to bypass a sensor.

Panel Status - Touch the Related Show button to display the

status of the security system.

Change Partition - Touch the Related button to change

partitions.

Chime - Touch the On or Off button to toggle the touch screen

chime feature on or off. This feature will enable this touch

screen to beep when a certain door opens. Consult the dealer

regarding which doors or windows are programmed to chime

when opened. Refer to the security panel documentation for

information on this feature.

Keypress Volume - Touch the arrow buttons to adjust this

touch screen’s keypress volume level. The siren sounds are

not controlled by this setting.

Beep Volume - Touch the arrow buttons to adjust this touch

screen’s beep volume level. The siren sounds are not

controlled by this setting.

Brightness - Touch the arrow buttons to adjust the brightness

level of this touch screen’s screen.

Default screen - Use this feature to set this touch screen’s

screen saver mode. Select Blank to have the screen and LED

go dark after a period of inactivity. Otherwise, the default will

be the Home screen and the screen will always be lit.

The touch screen will automatically blank daily at 2:00 AM for

60 minutes.

Calibration – The touch screen typically does not need to be

calibrated. However, if the touch screen buttons do not

respond correctly, touch the Show button to access the

Calibration screen. To calibrate the touch screen, touch the +

icons in the corners of the screen using a soft, fine point.

Help - Touch the Help button to access the Help menu, which

displays a list of help topic buttons. Touch the buttons for

information on a given topic.

Set Date/Time - Touch the related button to access the

Date/Time menu.

Code Required Access - Touch the On or Off buttons to

toggle this feature. When turned on, it will require a user

access code to be entered for most touch screen functions.

With code required access, not all icons will be displayed.

Note: If this device (or any other keypad) is located in areas

that are less secure such as a garage which is not monitored,

be sure Quick Exit is programmed to off.

Emergency Keys (Default on) - Touch the On or Off buttons

to toggle this feature. There will be a prompt to enter a code.

Installer or dealer code must be used. When turned on, the

Emergency button appears. When turned off, the Emergency

button does not appear.

Fire Key (Default off) - Touch the On or Off buttons to toggle

this feature. There will be a prompt to enter a code. Installer or

dealer code must be used.

The fire emergency key will show that the fire key is active. If

the fire emergency option is on, the button

appears under the fire button. If the emergency option is off,

the button does not appear if the button is

pressed.

Note: The Emergency keys and Fire key programming options

appear only within two minutes of initial power up or if the

touch screen is reset.

Status LED

The touch screen has an LED that indicates power and sleep

mode status at a glance. Table 5 explains LED behavior.

Table 5: Status LED

LED

System status

Solid blue (while

backlights are on)

Primary power present

Fading blue

Primary power failure

Off

Screen saver active

Operation

Refer to Concord 5 in TouchScreen User Guide for basic touch

screen operation information.

Refer to the panel documentation for complete Concord 4

programming and operation information.

Emergency button

Touch the button and an Emergency screen

appears. Depending on the system, two or three buttons (the

Panic and Police buttons or the Panic, Police, and Fire

buttons) may appear. Select the appropriate button.

An emergency alarm initiated by mistake can be canceled by

touching the button and entering your user

access code within 30 seconds.

Note: The fire panic cannot be canceled.

6 / 8 P/N 466-5410 (EN) • REV D • ISS 19MAR18

Testing

Test the touch screen operation by arming/disarming the

system, activating the touch screen panics, and bypassing

sensors to verify correct operation.

Note: Contact the central monitoring station before activating

alarms to avoid dispatching local police and fire departments.

Refer to the panel User Manual for complete system operating

instructions.

Note: Test system at least once per week.

Note: Each control unit shall indicate that the system is

intended to be checked by a qualified technical at least every 3

years.

Troubleshooting

Problem

Actions/Solutions

Doesn’t power up (no

display and no beeps

when screen is

pressed)

Check for correct wiring connections at touch

screen and panel terminals.

Make sure panel battery is connected

correctly and panel transformer is plugged in.

Make sure panel transformer is not plugged

in to an electrical outlet controlled by a

switch. Relocate transformer to an

unswitched outlet location if necessary.

Icons not visible

Try touching the touch screen (if screen saver

option is on). Adjust Brightness level. Disable

the screen saver option.

No sound coming from

speakers

Check Status beeps volume and Keypress

volume levels in settings. Check for correct

wiring connections at touch screen and panel

terminals.

Sensors named as

door/window/motion

are displaying under

Property icon

The name of the sensor is too long. Place

door/window/motion earlier in the name or

shorten the name.

Touch screen has red

icon (offline)

This icon is displayed if a touch screen has

incurred some form of communication and/or

hardware failure. Check for correct bus wiring

connections (green and white wires) at touch

screen and panel terminals. If wired correctly

and the failure message persists, the failed

touch screen must be deleted from the touch

screen panel and rescanned. If error

messages continue even after the failed

device has been removed, it is possible that

the failed device is a different touch

screen. In that case, delete all screens from

the Concord and remove them from the

Concord’s bus, and re-scan bus devices.

AAG motion icon

continually shows

sensor is open

Must use non-restoral groups such as motion

group 15 or 17. Using restoral groups may

result in a continuously red AAG motion icon.

Can both door and

motion text be used in

a sensor?

Not recommended.

Degraded or inhibited

touch screen

functionality

Check wiring.

Confirm wire length is not exceeding 120 ft

(22 gauge).

Re-calibrate touch screen.

Problem

Actions/Solutions

Trouble condition not

displayed under status

Refer to event buffer in touch screen and/or

view full status on alphanumeric keypad.

If a Concord 5” TouchScreen has a problem

and the touch screen is reset, the following is

not displayed as part of status:

• Aux low battery

• Aux power trouble

Specifications

Compatibility

Concord 4 Version 4.5 or later

Power requirements

12 VDC nominal

Current consumption:

Maximum alarm current

400 mA

Typical operation

100 mA

Power saving mode (no

panel AC power)

40 mA

Operating temperature

32 to 120°F (0 to +49°C)

Storage temperature

−4 to +140°F (−20 to +60°C)

Maximum relative humidity

85% noncondensing

Dimensions (L x W x D)

6.7 × 5.0 × 0.8 in. (170 × 127 × 20 mm)

Regulatory Information

Manufacturer

UTC Fire & Security Americas Corporation, Inc.

2995 Red Hill Ave, Costa Mesa, CA 92626, USA

Warnings and

Disclaimers

THESE PRODUCTS ARE INTENDED FOR SALE

TO AND INSTALLATION BY QUALIFIED

PROFESSIONALS. UTC FIRE & SECURITY

CANNOT PROVIDE ANY ASSURANCE THAT

ANY PERSON OR ENTITY BUYING ITS

PRODUCTS, INCLUDING ANY “AUTHORIZED

DEALER” OR “AUTHORIZED RESELLER”, IS

PROPERLY TRAINED OR EXPERIENCED TO

CORRECTLY INSTALL FIRE AND SECURITY

Concord 5” TouchScreen Installation Sheet 466 5410 Revd 5 Touch Screen Install

Navigation menu

Versions of this User Manual:

Views

Navigation