Intermatic CA5000 Mulit-Scene Wall Controller User Manual CA5000

Intermatic Inc Mulit-Scene Wall Controller CA5000

Exhibit D Users Manual per 2 1033 b3

WARNING: Read instructions completely before installation and retain for future reference.WARNING:WARNING:OTHER CAUTIONS:For installation and/or use in accordance with appropriate electrical codes and regulations.Consult a qualified electrician for installation and operation.1. For remote operation of Z-Wave compatible controls.2. Use this device only with copper or copper clad wire.Note: Designed to work only in the presence of InTouch™ Server (CA5500B or other).Model CA5000Multi-Scene Wall ControllerSpecifications:Ratings:Colors:Connections:RF Information:Network Information:Wireless RF Control120VAC, 50/60HzIncludes white, ivory, and light almondsnap-on face plates.Black-Line, White-Neutral,Green-GroundMinimum Range:50ft indoor; 100ft outdoorFrequency: 908.42 MHzMesh Network - Each line powerednode acts as a repeater to routedistant signals.Data Rate: 9600 bits/secondSize: 232 Z-Wave™ NodesOperating Temperature Range:32°F (0°C) to 104°F (40°C)Power Consumption: 2.0W MaxINSTALLATION:1. WARNING: TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER ANDTEST THAT POWER IS OFF BEFORE WIRING.Operation:2. Refer to wiring diagrams for proper connection of multi-scene wall controller.3. Check that all wire connections are secure.4. Place all wires inside junction box. Install multi-scene wall controller using (2) mounting screws furnished.Complete installation with a decorator style wall-plate.5. Reconnect your electrical power.6. Press scene number button(s) to focus control activities; Press “Enter” to toggle selectedscene(s); Press7. For programming instructions refer to the (158CA12789).InTouch Installer & Users Guiders/ to raise or lower selected scene(s) level; Press the home key to clear selectedscene(s).The CA5000 Multi-Scene Wall Controller is an enhanced radio frequency controller compatible with Z-wave™enabled networks and devices. Each line powered node in a Z-wave network is designed to act as a repeaterforming a mesh network eliminating radio “dead spots” and providing the highest level of reliability.- Multiple location On/Off & Raise/Lower control when used with Z-wave enabled devices.- Allows control of up to 6 individual pre-set scenes containing any number of Z-wave enabled devices.- Features individual scene status feedback for enhanced control.- Separate focus and control buttons allow the user to custom mix scene selections and vary light levels.- Home key provides for quick de-selection of scenes.FeaturesFaceplateSnapFCC STATEMENT OF COMPLIANCEWARNING! Changes or modifications not expressly approved by Intermatic Inc. could void the user’s authority to operate theequipment.This device complies with part 15 of the FCC rules. Operation of this device is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna or device.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.Faceplate Color ConversionThe faceplate color of this device can be converted tomatch interior design requirements. Simply use one ofthe included color plates (white, ivory, or light almond)and proceed as follows (please note that the device mustbe removed from the junction box to change thefaceplate, follow the installation instructions andwarnings).1. Select the color of the faceplate you desire.2. The faceplate has snaps on its sides. Using a smallscrewdriver or thumbnail, gently remove the face platefrom the housing body.3. Take the new faceplate and position it properly to thehousing body. Notice that the locking snaps will align inonly the proper direction. Line up the plastic snaps withthe slots in the housing body and snap into place.4. The faceplate snaps in with an audible click. Ensurethat both snaps are secure. Replace the device in thejunction box following installation instructions.The color conversion is complete.Providing a Brighter Solution™158CA12472REFWIRELESS CONTROLSTM
WhiteStandard InstallationHot BlackNeutralWire Connector GroundGreen120VAC50/60 HzCA5000Raise/LowerButtonsSceneButtons135246ENTEREnter & HomeButtons135246ENTERLIMITED TEN YEAR WARRANTYIf within ten (10) years from date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace, at itssole option. This warranty applies only to the original purchaser and is not transferable. This warranty excludes and this is disclaimed liability for labor forremoval of this product or reinstallation. The warranty does not apply to: (a) damage caused by accident, abuse, mishandling, dropping, acts of God, or anynegligent use; (b) units which have been subject to unauthorized repair, opened, taken apart, or otherwise modified; (c) units not used in accordance withdirections; (d) damages exceeding the cost of the product. Some states do not allow a limitation of damages, so the foregoing limitation may not apply to you.This warranty gives you specific legal rights and you may have other rights that vary from state to state.This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing postage prepaid to thenearest authorized service center listed. Please be sure to wrap the product securely when mailing to avoid shipping damage. This warranty is made by:Intermatic Incorporated, After Sales Service, 7777 Winn Road, Spring Grove, IL 60081-9698, 815-675-7000 www.intermatic.comINTERMATIC INCORPORATED WILL NOT BELIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES.ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULARPURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION ASTHE WARRANTY PERIOD STATED ABOVE.Wire Connector InstallationConnect wires as follows:Screw wire connectors on clockwise making sure nobare conductors show below the wire connector.Secure each connector with electrical tape.Insert wires straightthen twist clockwiseSecure each connnectorwith electrical tapeFor non-standard wiring applications, refer toWire Combination & Connector ChartOrange Wire Connector Combination Chart1- #14 AWG1 #14 AWGor1 #16 AWGor1-2 #18 AWG+1- #16 AWG1 #16 AWGor1-2 #18 AWG+2- #16 AWG1to2#18AWG+1- #18 AWG1to3#18AWG+Strip wires to expose3/8” of conductors3/8”CA5000 MultiScene ControlProviding a Brighter Solution™WIRELESS CONTROLSTM

Navigation menu