Intermatic T101P And T101Pcd82 Instructions Owner S Manual

2014-07-06

: Intermatic Intermatic-T101P-And-T101Pcd82-Instructions-Owner-S-Manual intermatic-t101p-and-t101pcd82-instructions-owner-s-manual intermatic pdf

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadIntermatic Intermatic-T101P-And-T101Pcd82-Instructions-Owner-S-Manual
Open PDF In BrowserView PDF
MODEL: T101P

LR3730

24 HR DIAL TIME SWITCH (SPST)

IN TYPE 3R DUSTPROOF RAINPROOF ENCLOSURE SUITABLE FOR POOL
EQUIPMENT CONTROL IF INSTALLED 5FT. OR MORE FROM EDGE OF POOL.

40 AMP. RESISTIVE, INDUCTIVE, TUNGSTEN
OR 1000 VA PILOT DUTY 120/208/240 VOLT AC;
2 HP (24 FLA) - 120V AC; 5 HP (28 FLA) - 240V AC

CLOCK MOTOR: 110-125 VOLTS - 60 HZ.

CLOCK MOTOR VOLTAGE AND CYCLE MUST BE AS SPECIFIED. TO
ORDER REPLACEMENT, INDICATE ART NO. (WG--) ON MOTOR COVER.
WIRING
ON
TIME
TRIPPER DIAGRAM
DIAL
CLOCK
MOTOR

GRD.

TIME
POINTER
120V
SUPPLY

OFF
TRIPPER
MANUAL
LEVER

NEUT.
LINE

A

1

2
TO
LOAD
GROUND

WIRING INSTRUCTIONS:	 To wire switch follow diagram above.
Use solid or stranded COPPER only wire with insulation to suit
installation. See gauge selection table for normal service applications.To make power connections remove 1/2 inch of insulation
from wire ends. Insert bare ends of wire under the pressure plate
of terminals. Use 3/16 or larger screwdriver to tighten terminal
screws firmly. (25 lb-in minimum).
REPLACE INSULATOR BEFORE TURNING ON ELECTRICITY.
MINIMUM
COPPER
WIRE SIZE
(AWG)

14
12
10
8

MAX.
LOAD
(AMP)

15
20
30
40

MIN.
INSULATION
TEMP (°C)

60
60
60
75

75°C INSULATION MAX. MOTOR
LOAD (HP)

SINGLE PHASE

3 PHASE

120 V.

240 V.

208 V.

240 V.

1/2
1
2
-

2
2 1/2
3
5

N/A

N/A

PRESSURE PLATE
TERMINAL SCREW
MAKE SURE WIRE
INSULATION CLEARS
PRESSURE PLATE

PROGRAMMING INSTRUCTIONS
1.	 TO SET “ON” AND “OFF” TIMES: Hold trippers against edge
	 of CLOCK-DIAL, pointing to time (AM or PM) when ON and
	 OFF operations are desired, tighten tripper screws firmly. For
	 additional tripper pairs on CLOCK-DIAL order 156T1978A.
2.	 TO SET TIME-OF-DAY: Pull CLOCK-DIAL outward. Turn in
	 either direction and align the exact time-of-day on the CLOCK	 DIAL (the time now, when switch is being put into operation) to
	 the pointer. DO NOT MOVE POINTER.
OPERATING INSTRUCTIONS
•	 TO OPERATE SWITCH MANUALLY: Move MANUAL LEVER
	 below CLOCK-DIAL left or right as indicated by arrows. This
	 will not effect next operation.
•	 IN CASE OF POWER FAILURE, reset CLOCK-DIAL to
	 proper time-of-day. See programming instructions.

INTERMATIC INCORPORATED

158TS10934

SPRING GROVE, ILLINOIS 60081-9698
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:56
Instance ID                     : uuid:48619fc0-b81f-4cb0-a466-e2a4e186b8a1
Document ID                     : adobe:docid:indd:5090e638-66fa-11de-9075-caa2d3222b73
Rendition Class                 : proof:pdf
Derived From Instance ID        : 8933a0bc-5821-11de-8905-a654dcb6e7fc
Derived From Document ID        : adobe:docid:indd:8933a0ba-5821-11de-8905-a654dcb6e7fc
Create Date                     : 2009:06:30 11:42:34-05:00
Modify Date                     : 2009:06:30 11:42:35-05:00
Metadata Date                   : 2009:06:30 11:42:35-05:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11260 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CS3 (5.0.4)
EXIF Metadata provided by EXIF.tools

Navigation menu