Intermec Technologies 1000CP01CX2 1000CP01C, 1000CP02C, 1001CP01C User Manual

Intermec Technologies Corporation 1000CP01C, 1000CP02C, 1001CP01C

User Manual - final 3-1-11

Download: Intermec Technologies 1000CP01CX2 1000CP01C, 1000CP02C, 1001CP01C User Manual
Mirror Download [FCC.gov]Intermec Technologies 1000CP01CX2 1000CP01C, 1000CP02C, 1001CP01C User Manual
Document ID1423835
Application IDya/47dEKimBzZM/V+tC+OA==
Document DescriptionUser Manual - final 3-1-11
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize452.54kB (5656804 bits)
Date Submitted2011-03-01 00:00:00
Date Available2011-02-24 00:00:00
Creation Date2011-02-28 15:43:51
Producing SoftwareAcrobat Distiller 9.2.0 (Windows)
Document Lastmod2011-02-28 15:49:44
Document Titleuntitled

70 Series
Mobile
Computer
CK70, CK71, CN70, CN70e
User’s Manual
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2011 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
ii
70 Series Mobile Computer User’s Manual
Contents
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Service Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
1 Using the Computer
..................................................... 1
About the 70 Series Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview of 70 Series Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
70 Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
About the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Changing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Entering Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Entering Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Entering Characters on the CK70 and CK71 Keypads . . . . . . . . . . . . . . . . . . . . . . . 22
About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
About the Intermec Dashboard Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configuring the Screen Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Reading Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
70 Series Mobile Computer User’s Manual
iii
Contents
Inserting a microSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installing a microSD Card in a CN70 or CN70e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installing a microSD Card in a CK70 or CK71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Transferring Files To and From Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2 Understanding the User Interface and Intermec Applications
. . . . . 35
About the User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
About the Home Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Interacting With the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Title Bar Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Aligning the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
About Intermec Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Applications Available on the Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Applications You Can Download to the Mobile Computer. . . . . . . . . . . . . . . . . . . 43
3 Using the Phone
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
About the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Activating the UMTS Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Activating the CDMA Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Turning the Phone On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Making a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Making an Emergency Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4 Using the Camera
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
About the Color Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Taking a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Recording a Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Saving Pictures and Videos to an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
iv
70 Series Mobile Computer User’s Manual
Contents
5 Using GPS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
About the Integrated GPS on Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using the GPSID Installed on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Improving GPS Performance on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
6 Configuring the Computer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
How to Configure the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Using Intermec Settings on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Starting Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
About the Structure of Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Navigating in Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Configuring Profile Settings With Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . 68
Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Hiding Menu Items in Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Using Intermec Settings Remotely With SmartSystems Foundation . . . . . . . . . . . . . . . . . . 70
About Network Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Configuring 802.11a/b/g/n (Wi-Fi) Radio Communications . . . . . . . . . . . . . . . . . 70
Configuring Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Configuring Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
About Serial and USB Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Creating an ISP Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Creating a VPN Server Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
About Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Loading a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
7 Managing the Computer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Managing the Computer in Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Managing the Computer Using SmartSystems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Managing the Computer Using Third-Party Software . . . . . . . . . . . . . . . . . . . . . . . 93
Developing and Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Packaging Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Choosing a Target Location. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Installing Applications Using SmartSystems Foundation Console. . . . . . . . . . . . 94
70 Series Mobile Computer User’s Manual
Contents
Installing Applications Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . 95
Installing Applications Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Launching Applications Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Updating the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Updating Multiple Computers Using SmartSystems Console . . . . . . . . . . . . . . . . 97
Updating Individual Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
8 Troubleshooting and Maintaining the Computer
. . . . . . . . . . . . . . . . . . 101
About the Intermec Dashboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Troubleshooting Your Mobile Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Troubleshooting the Wi-Fi Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Troubleshooting 802.1x Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Checking 802.11 Network Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
Troubleshooting Reading Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Troubleshooting Operating the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Calling Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Finding Your Configuration Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Finding Your Operating System Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Rebooting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Cold Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Clean Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Cleaning the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
ASpecifications and Default Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Physical and Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
CN70 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
CN70e Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
CK70 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
CK71 Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Power and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Back Accessory Interface Pin-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Touch Screen Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
vi
70 Series Mobile Computer User’s Manual
Contents
Standard Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Regulatory Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Bar Code Symbologies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Imager Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
B Keypads and Keystrokes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Standard Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
CN70 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
CN70e Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
CK70 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
CK71 Keypads and Keystrokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
C ScanNGo Wi-Fi Configuration Bar Codes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Radio Configuration Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
2D Configuration Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
1D Configuration Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
I Index
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
70 Series Mobile Computer User’s Manual
vii
Contents
viii
70 Series Mobile Computer User’s Manual
Before You Begin
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow cautions in this
document before handling and operating Intermec equipment. You
can be seriously injured, and equipment and data can be damaged if
you do not follow the safety cautions.
This section explains how to identify and understand cautions and
notes that are in this document.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to prevent
equipment damage or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at www.intermec.com and click Support >
Returns and Repairs > Warranty.
Disclaimer of warranties: The sample code included in this document
is presented for reference only. The code does not necessarily
represent complete, tested programs. The code is provided “as is with
all faults.” All warranties are expressly disclaimed, including the
implied warranties of merchantability and fitness for a particular
purpose.
Web Support
Visit the Intermec web site at www.intermec.com to download our
current manuals (in PDF).
70 Series Mobile Computer User’s Manual
ix
Before You Begin
Visit the Intermec technical knowledge base (Knowledge Central) at
www.intermec.com and click Support > Knowledge Central to
review technical information or to request technical support for your
Intermec product.
Telephone Support
In the U.S.A. and Canada, call 1-800-755-5505.
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the
Intermec web site, click About Us > Contact Us.
Service Location Support
For the most current listing of service locations, click Support >
Returns and Repairs > Repair Locations.
For technical support in South Korea, use the after service locations
listed below:
AWOO Systems
102-1304 SK Ventium
522 Dangjung-dong
Gunpo-si, Gyeonggi-do Korea, South 435-776
Contact: Mr. Sinbum Kang
Telephone: +82-31-436-1191
Email: mjyun@awoo.co.kr
IN Information System PTD LTD
6th Floor
Daegu Venture Center Bldg 95
Shinchun 3 Dong
Donggu, Daegu City, Korea
E-mail: jmyou@idif.co.kr or korlim@gw.idif.co.kr
Who Should Read This Manual
This manual is written for the person who is responsible for
installing, configuring, and maintaining the 70 Series Mobile
Computer.
This manual provides you with information about the features of the
70 Series mobile computer, and how to install, configure, operate,
maintain, and troubleshoot it.
70 Series Mobile Computer User’s Manual
Before You Begin
Before you work with the 70 Series mobile computer, you should be
familiar with your network and general networking terms, such as IP
address.
Related Documents
This is a list of related Intermec documents.
•
Intermec Settings Command Reference Manual
•
Intermec Developer Library (IDL) Resource Kit Developer’s Guide
The Intermec web site at www.intermec.com contains our
documents (as PDF files) that you can download for free.
To download documents
1 Visit the Intermec web site at www.intermec.com.
2 Click the Products tab.
3 Using the Products menu, navigate to your product page. For
example, to find the CN70 computer product page, click
Computers > Handheld Computers > CN70.
4 Click the Manuals tab.
If your product does not have its own product page, click Support >
Manuals. Use the Product Category field, the Product Family field,
and the Product field to help you locate the documentation for your
product.
70 Series Mobile Computer User’s Manual
xi
Before You Begin
Patent Information
Product is covered by one or more of the following patents:
4882476; 4894523; 4953113; 4961043; 4970379; 4988852; 5019699;
5021642; 5038024; 5081343; 5095197; 5144119; 5144121; 5182441;
5187355; 5187356; 5195183; 5216233; 5216550; 5195183; 5195183;
5218191; 5227614; 5233172; 5241488; 5243602; 5258606; 5278487;
5288985; 5308966; 5322991; 5331136; 5331580; 5342210; 5349678;
5359185; 5371858; 5373478; 5389770; 5397885; 5410141; 5414251;
5416463; 5442167; 5464972; 5468947; 5468950; 5477044; 5486689;
5488575; 5500516; 5502297; 5504367; 5508599; 5514858; 5530619;
5534684; 5536924; 5539191; 5541419; 5548108; 5550362; 5550364;
5565669; 5567925; 5568645; 5572007; 5576529; 5592512; 5594230;
5598007; 5608578; 5616909; 5619027; 5627360; 5640001; 5657317;
5659431; 5671436; 5672860; 5684290; 5719678; 5729003; 5742041;
5761219; 5764798; 5777308; 5777309; 5777310; 5786583; 5793604;
5798509; 5798513; 5804805; 5805807; 5811776; 5811777; 5818027;
5821523; 5828052; 5831819; 5834753; 5834749; 5837987; 5841121;
5842070; 5844222; 5854478; 5862267; 5869840; 5873070; 5877486;
5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906;
5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056;
5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499;
5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379;
6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289;
6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063;
6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053;
6234393; 6234395; 6244512; 6249008; 6328214; 6330975; 6345765;
6356949; 6367699; 6375075; 6375076; 6375344; 6431451; 6435411;
6484944; 6488209; 6497368; 6532152; 6538413; 6539422; 6621942;
6641046; 6681994; 6687403; 6688523; 6732930
There may be other U.S. and foreign patents pending.
xii
70 Series Mobile Computer User’s Manual
1
Using the Computer
This chapter introduces the 70 Series Mobile Computers with
Windows® Embedded Handheld operating system. Use this
chapter to learn about the basic features and functions of each
computer, as well as the available accessories for it.
Chapter 1 — Using the Computer
About the 70 Series Mobile Computers
The ergonomically designed Intermec 70 Series Mobile Computers are
built on the Microsoft® Windows Embedded Handheld operating
system. They are lightweight, easy-to-use, and run most software
developed for the Windows Embedded platform, including
standalone, client-server, and browser-based applications.
The 70 Series family of computers consists of four different models:
the CN70, CN70e, CK70 and CK71. The CN70 and CN70e have the
same features except that the CN70e offers a larger keypad for
data-input intensive applications. The CK70 and CK71 have most of
the same features, but the CK71 offers a choice of imager options and
does not offer a WWAN radio option (phone). Throughout this
manual, all versions of the mobile computer are referred to as 70 Series
unless information is specific to a particular model of computer.
In most of the user’s manual, pictures of the CN70 and CK70 represent
the four models of the 70 Series computers.
CN70 Front View
Cell phone speaker
Good read LED
Battery status LED
On/off button
Notification LED
Scan button
Microphone
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
CN70 Back View
Imager
Camera
Speaker port
Battery
IrDa port
CK70 Front View
Cell phone speaker
Good read LED
Notification LED
Battery status LED
Scan button
On/off button
Microphone
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
CK70 and CK71 Back View
Imager
Camera
Imager
Camera
Left speaker
port
IrDA port
Left speaker
port
IrDA port
Battery
Battery
Overview of 70 Series Features
The 70 Series includes these standard features:
•
•
•
•
•
•
•
•
•
•
EA30 area imager that can read bar codes and capture images
(CK71 only) Choice of EA30, EX25, or EV12 imagers
Multi-processor architecture with 512 MB DRAM and 1G Flash
CDMA or UMTS capability (not available on CK71)
802.11a/b/g/n and Bluetooth® radios
GPS radio on CDMA or UMTS computers (not available on CK71)
5-megapixel auto-focus color camera
Customer-accessible microSD slot for memory cards up to 32 GB
Customer-accessible SIM card slot
IrDA port with speeds up to 4 Mbps
The 70 Series Mobile Computer with an IEEE 802.11a/b/g/n
radio installed is Wi-Fi® certified for interoperability with
other 802.11a/b/g/n wireless LAN devices.
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
About the Status LEDs
Use the following illustrations and table to understand the status
LEDs on your computer. Not every 70 Series computer has all six
status LEDs. For example, the QWERTY versions of the CN70 and
CN70e do not have a Green key status LED.
Location of the CN70 Status LEDs
Good Read and Ready-to-Work
Status LED
Notification LED
Orange key
status LED
Battery status LED
Green key
status LED
Shift key
status LED
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
Location of the CK70 Status LEDs
Notification LED
Good Read and Ready-to-Work
status LED
Orange key
status LED
Battery status LED
Green key
status LED
Shift key status LED
(CK70 alphanumeric
and CK71 function numeric)
Shift key status LED
(CK70 numeric and
CK71 alphanumeric)
Status LED Descriptions
LED
Color
Description
Notification
Amber
This LED is user-programmable.
Good Read
Green
The computer successfully decoded a bar code.
Ready-to-Work Blue
If you have Intermec Terminal Emulator (ITE),
the application is running and connected to the
host. If you do not have ITE, you can configure
the Ready-to-Work indicator to turn on or off to
indicate a healthy state.
Blinking ITE is running but not connected to the host.
blue
See “About Battery Status” on page 12.
Battery
Key Status
Shift
Green
The Green function key is enabled.
Orange
The Orange function key is enabled.
Red
The Shift key is enabled.
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
70 Series Accessories
The 70 Series computer ships with a battery. All other accessories are
sold and ordered separately. For help, contact your local Intermec sales
representative.
70 Series Accessories
Accessory
Description
Audio Snap-On Adapter
Use the audio adapter to connect the
computer to a headset.
CK70/CK71 Battery
This battery provides main power to the
CK70 and CK71.
CK70/CK71 Magstripe Reader
Adapter
Use the magnetic stripe reader to be able
to read magnetic cards with the CK70 and
CK71 computer.
CN70/CN70e Battery
This battery provides main power to the
CN70 and CN70e.
CN70/CN70e Magstripe Reader
Snap-On Adapter
Use the magnetic stripe reader to be able
to read magnetic cards with the CN70
and CN70e computer.
Desktop Stand
Use the desktop stand hold the 70 Series
computer on your desk or a stable
surface.
DEX/UCS Snap-On Adapter
Use this adapter to receive and send serial
communications through a DEX/UCS
connection.
DX1 Desktop Dock with USB
connectivity
Use the desktop dock with the:
• Computer cup to charge the battery
while it is installed in the computer.
• Battery cup to charge the battery.
DX2 Dual Dock and DX4 Quad
Dock. The DX2 and DX4 are
available in charge-only and
Ethernet configurations.
Ethernet Snap-On Adapter
70 Series Mobile Computer User’s Manual
Use these charger bases with the:
• Computer cup to charge batteries
while they are installed in the
computer.
• Battery cup to charge two batteries.
Use the Ethernet adapter to be able to
connect the computer to an Ethernet
network.
Chapter 1 — Using the Computer
Accessory
Description
Handstrap Replacement Kit
You can order and install a replacement
handstrap for the CN70, CN70e, and
CK70/CK71. Each kit contains 5
handstraps.
Holster
Use the holster to store the computer
when you need your hands free.
RS-232 Snap-On Adapter
Use the RS-232 adapter to convert the
connector on the bottom of the computer
to a serial connector.
Scan Handle
Use the scan handle to provide better
ergonomics to the computer for
high-volume scanning applications.
Tethered Stylus Replacement Kit You can order and install a replacement
stylus.
USB Snap-On Adapter
Use this adapter to convert the bottom
connector of the computer to a USB
connector.
Vehicle Dock
Use the vehicle dock to provide power and
hold your computer while you are using it
in a vehicle.
Vehicle Holder
Use the vehicle holder to hold your
computer while you are using it in a
vehicle.
Vehicle Power Adapter
Use the vehicle power adapter to provide
power to the computer from your vehicle.
Vocollect Snap-On Adapter
Use this adapter to be able to use the
Vocollect voice solution in your
warehouse.
About the Battery
The computers use these rechargeable Lithium-ion battery pack as the
main power source:
•
•
3.7 V, 4000 mAH (14.8 Wh) battery for the CN70 and CN70e
3.7 V, 5200 mAH (19.2 Wh) battery for the CK70 and CK71
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
The battery used in this device may present a fire or chemical burn
hazard if it is mistreated. Do not disassemble it, heat it above
100°C (212°F) or incinerate it. Dispose of used batteries
promptly. Keep away from children.
Charging the Battery
You need to fully charge the battery before using your computer for the
first time. Use one of the charging accessories listed in the next table to
charge the battery.
70 Series Charging Accessories
Charging Accessory
Charging Time
Snap-on adapters
Up to 6 hours
DX1, DX2, or DX4 dock
Up to 6 hours
CN70, CN70e, CK70, and CK71 Vehicle Power Adapter Up to 6 hours
Changing the Battery
If your battery power is low, you need to either charge the battery in the
computer, or replace it with a charged battery.
To change the battery:
1 Save your files and close any open applications.
2 Press the Power button and choose Hibernate from the menu to
suspend the computer.
3 Detach the handstrap from the computer.
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
Detaching the Handstrap From a CN70 or CN70e
Detaching the Handstrap From a CK70 or CK71
4 Make sure the computer is hibernate mode and that the screen has
turned off.
5 Remove the battery.
10
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
•
On the CN70 or CN70e, push the battery release toward the
bottom of the computer until the battery releases and then lift
it away from the computer.
•
On the CK70 or CK71, push the battery release toward the top
of the computer until the battery releases and then lift it away
from the computer.
6 Insert the top end of a fully charged battery into the computer, and
press down firmly on the bottom of the battery. Make sure that the
battery release is fully engaged.
70 Series Mobile Computer User’s Manual
11
Chapter 1 — Using the Computer
About Battery Status
Use the battery icon on the Title bar to see the power status of your
battery. If you want more detailed information on your battery such as
usage time or voltage, use the Intermec Dashboard. For more
information on the Dashboard, see “About the Intermec
Dashboard” on page 102.
Understanding the Battery Icon Status
Battery Icon Status
Battery is fully charged.
Battery has a high charge.
Battery has a medium charge. You should be able to work for
several more hours before changing batteries.
Battery is low. You need to charge or replace the battery soon.
Battery is critically low. You need to replace the battery now.
Battery is charging.
The battery is not installed.
12
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
You can also use the battery status LED to see the charging status of
your battery.
Battery status LED
Understanding the Battery Status LED
LED State
Description
Steady green
The computer is connected to a charger and the
battery is more than 95% charged.
Blinking red
The battery is very low. The computer will soon go
into Suspend mode. Charge or replace the battery.
Steady red
The computer is connected to a charger and the
battery is charging.
Blinking red-amber
The battery charging system has encountered an
error. The battery is not charging.
Steady amber
The battery is outside of the allowable charging
temperature range. Charging will resume when the
battery temperature is back in the acceptable range of
0° to 45°C (32° to 113°F).
Off
The computer is not on external power and the
battery is operating normally.
70 Series Mobile Computer User’s Manual
13
Chapter 1 — Using the Computer
About Battery Life and Conservation
Batteries that are stored outside the computer for long periods of time
slowly discharge. Intermec recommends storing the battery in a
charger to maintain battery performance.
Battery Conservation Tips
When You Want To:
Do This to Save Battery Power:
Use the computer and the Low
• Connect the computer to an external
Battery status icon appears or the
power source.
Battery light comes on.
• Or, save your data and press the Power
button and select Hibernate. After the
computer turns off, remove the battery
and insert a fully charged battery.
Stop using the computer for 5
minutes or longer.
Make sure that the low battery icon is not
on the screen and the Battery LED is not
on. Press the Power button and choose
Suspend to suspend the computer.
Store the computer for more than If you are storing the computer for a few
a day.
days, like over the weekend, install a
charged battery or connect the computer
to a power source.
If you are storing the computer for longer,
remove and charge the battery, and then
store both the battery and computer in a
cool location. If you store the battery for
several months, recharge the battery to
keep it at peak performance.
Store the battery outside the
computer.
14
Store the batteries in a charger.
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
About the Keypad
The CN70 comes with either a QWERTY keypad or a numeric keypad.
The CN70e comes with either a QWERTY numeric keypad or numeric
keypad. The computer has an ambient light sensor that detects low
light and turns on the keypad backlight. By default, the keypad
backlight is enabled in low light conditions. You can disable the
keypad backlight to conserve power. Use Intermec Settings to
configure the backlight. For help, see “Using Intermec Settings on
the Computer” on page 62.
CN70 QWERTY Keypad
sym
Esc
Enter
Space
CN70 Numeric Keypad
Esc
Caps
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
Space
70 Series Mobile Computer User’s Manual
Enter
15
Chapter 1 — Using the Computer
CN70e QWERTY Numeric Keypad
Esc
Space
CN70e Numeric Keypad
F6
F7
F1
F2
Esc
F3
Caps
GHI
PQRS
16
F10
F9
F8
ABC
JKL
TUV
F4
F5
DEF
MNO
WXYZ
Space
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
The CK70 comes with either a large alpha or an alphanumeric keypad.
The CK71 comes with either a numeric function keypad or an
alphanumeric keypad. The computer has an ambient light sensor that
detects low light and turns on the keypad backlight. By default, the
keypad backlight is enabled in low light conditions. You can disable
the keypad backlight to conserve power. Use Intermec Settings to
configure the backlight. For help, see “Using Intermec Settings on
the Computer” on page 62.
CK70 Large Alpha Keypad
Esc
Send
End
F1
F4
F7
F6
F9
F10
Space
F8
F5
Enter
F3 sym
F2
\ [
Insert Delete
Ctrl
70 Series Mobile Computer User’s Manual
17
Chapter 1 — Using the Computer
CK70 Alphanumeric Keypad
Esc
Alt
F6
Send
F1
F7
End
Insert
F2
Delete
F8
F3
F9
F4
Enter
F10
F5
F11
F17
F23
18
Ctrl
F12
F18
F13
F19
Space
F14
F20
F15
F21
F16
F22
F24
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
CK71 Numeric Function Keypad
View
Insert
Fld- Fld+
View
SysRq
Return
Page
Fld
Exit
Enter
A PrvScr
D Delete
PA1
Roll
Home
C NxtScr
Roll
PA2
Esc
PA3
Space
Return
F13
F1
F17
F5
F21
F9
F14
Enter
F2
F18
F22
F15
F3
F6
Reset
Attn
Clear
F16
F4
F19
F7
F20
F8
F23
F24
F10 F11 F12
Ctrl
70 Series Mobile Computer User’s Manual
Alt
19
Chapter 1 — Using the Computer
CK71 Alphanumeric Keypad
View
Alt Reset
Page
Fld
Exit
Esc
F6 PA1 PrvScr
F1
F8 PA3 Fld-
Roll
Delete
F9 Autolog
Return
F4
Enter
F10 EEOF
F5
F11 Attn
Ctrl
F12
F13
Space
F14 Dup F15 Erase F16 Find
F17 FldMk F18 Home F19 Hex F20
Clear
Help
Fld+
F3
NxtScr
F7 PA2 Insert
F2
Roll
F23 Menu F24 NewLn Mode
F21Keypd F22
Print
SysRq
Remove
Select
Entering Characters on the QWERTY Keypad
You need to use the orange modifier key b and the Shift key y to
access all characters and functions on the QWERTY keypad.
To type a character:
• Press the key for that character.
To type a character or access a function on the overlay:
•
20
Press b and then press the key for the character or function.
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
To only type characters or access functions on the overlay:
Press b twice to lock the orange modifier key to stay on, and then
press the keys for the characters or functions.
To type a single uppercase letter:
•
• Press y and then the letter key.
To type all uppercase letters:
Press yy to turn on Caps Lock, and then press the letter keys.
You can still type orange modifier characters by pressing b and then
the key for that character.
To turn off Caps Lock, press y.
Entering Characters on the Numeric Keypad
You need to use the orange modifier key b and the green modifier key
c to access all characters and functions on the Numeric keypad.
To type a character or access a function printed in orange on the
overlay:
• Press b and then press the key for the character or function.
To type a character or access a function printed in green on the overlay:
• Press c and then press the key for the character or function.
To type letters in the upper right corner of a key:
Press c and then press the key one to three times depending on the
position of the letter.
For example, in the upper right corner of the 2 key there are the
letters “ABC”:
•
• To type “c”, press c 2 2 2.
• To type “C,” press c 1 and then press c 2 2 2.
To only type letters:
Press c c to lock the green modifier key, and then press the key
one to four times depending on the position of the letter.
While the green modifier key is locked, press 1 to toggle between only
uppercase and lowercase letters.
•
To unlock the green modifier key, press c.
70 Series Mobile Computer User’s Manual
21
Chapter 1 — Using the Computer
Note: If uppercase letters are enabled and you unlock the green
modifier key, you may need to press c 1 to type lowercase letters.
Entering Characters on the CK70 and CK71 Keypads
You need to use the orange modifier key b, the green modifier key c,
and the Shift or Caps Lock key y to access all characters and functions
on the Alpha, Alphanumeric, and Numeric Function keypads.
To type a character or access a function printed in orange on the
overlay or in the upper left corner of a key:
• Press b and then press the key for the character or function.
To type a character or access a function printed in green on the overlay:
• Press c and then press the key for the character or function.
To type a single uppercase letter:
• Press y and then the letter key.
To type all uppercase letters:
Press yy to turn on Caps Lock, and then press the letter keys.
You can still type orange or green modifier characters by pressing b or
c and then the key for that character.
To turn off Caps Lock, press y.
About the Power Button
When you press the Power button, a dialog appears with a list of power
options. If you do not select a power options setting, the currently
selected action (the button outlined in bold) occurs after the timeout.
22
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
The Intermec Power Options Default Screen
Use the following table to understand the Intermec Power Options.
Note: The Real Time Clock (RTC) will persist through all of the power
options as long as it receives power from the Real Time Clock battery.
Intermec Power Options
Option
Description
Hibernate
(battery swap)
High power saving mode. Use this setting only for
swapping the battery. The computer saves the current
system state, registry, and file system and then powers off
all radios and internal devices. You can wake the computer
by pressing the Power button or connecting the computer
to external power.
Suspend
Medium power saving mode. The computer powers off all
radios and internal devices not involved in saving the
system state, but the phone stays on to receive calls. This
option is the default setting. You can wake the computer
by pressing the Power button, pulling the scanner trigger,
receiving a call, scheduling an event such as an alarm, or by
connecting external power.
70 Series Mobile Computer User’s Manual
23
Chapter 1 — Using the Computer
Option
Description
Reboot
The computer does not save the current system state, but
the registry and file systems are saved. The computer shuts
down all running processes and restarts.
Cancel
The Power Options menu is cancelled.
Screen Off
Lowest power saving mode. The screen turns off, but the
phone, all radios, and internal devices stay on. Tap the
screen to turn the screen back on.
Shutdown
Very high power saving mode. The computer turns off
everything. You must press Power or apply external power
to restart the computer.
The Intermec Power Options screen is customizable. You can use
Intermec Settings to determine which options are available to end
users, the timeout until the default choice is selected, the default
action if no option is selected, or to disable the Power Options screen.
For more information on customizing the screen using Intermec
Settings, see “Using Intermec Settings on the Computer” on page
62 or see the Intermec Settings Command Reference Manual.
About the Intermec Dashboard Button
If the Ready-to-Work light blinks, your computer may be experiencing
a problem. Press the Intermec Dashboard button (m) to launch the
Intermec Dashboard application and view troubleshooting and status
information.
You can press the m button at any time to bring up the Intermec
Dashboard. If the computer is not healthy, the current issues are
displayed at the top of the screen. If the device is healthy, you can use
the Dashboard to view device information. For more information, see
“About the Intermec Dashboard” on page 102.
Configuring the Screen Backlight
The display has an ambient light sensor that automatically adjusts the
backlight intensity to conserve power and ensure the display is
readable.
By default, the screen turns off when there is no activity with the
computer. Press a key or tap the screen to resume activity.
24
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
To configure the screen backlight to turn off:
1 Tap Start > Settings > Power.
2 Tap Advanced on the horizontal scroll bar.
3 Select the screen power off settings for when the computer is on
battery power or external power.
To configure the screen brightness:
1 Tap Start > Settings > System > Backlight.
2 Adjust the slider to the desired brightness level.
3 Tap OK.
Adjusting the Volume
You can adjust the computer volume for your needs and your
environment. The volume includes sounds you hear when you tap the
screen or read bar codes with the imager. You can set the volume to off,
very low, low, medium, high, very high (default), or vibrate.
You can also use the buttons on the right side of the computer to
adjust the volume:
• The upper button increases the volume.
• The lower button decreases the volume.
To adjust the volume:
1 Tap the Volume icon at the top of the screen, and then tap the
volume icon on the horizontal scroll menu.
2 Use your stylus or the u and d keys to adjust the volume slider to
the volume you want, select Vibrate, or select Off.
70 Series Mobile Computer User’s Manual
25
Chapter 1 — Using the Computer
Reading Bar Codes
The computer ships with an internal imager. Depending on the imager
model in your computer, you can read 1D and 2D bar code
symbologies, composite symbologies, and postal codes.
You can also connect the computer to:
cordless scanners, such as the SF51 and SR61 through Bluetooth
communications. For help, see “Connecting to a Bluetooth
Scanner” on page 72.
• tethered scanners, such as the SR30, and SR61T through the
RS-232 adapter (Model 1000AA03). For help, see “Connecting to
a Tethered Scanner” on page 76.
Note: When the Pictures & Videos application is running, you cannot
use the imager.
•
To read a bar code:
1 Enable only the bar code symbologies that you need.
2 Use Intermec Settings to choose the predefined imager mode that
best suits your environment:
Predefined Mode
For Scanning
1D
Only 1D labels.
1D and 2D Standard
(Default) All types of bar code labels.
1D and 2D Bright Environment
In high ambient light, such as outdoors in
the sunshine.
1D and 2D Reflective Surface
Glossy labels.
Note: You can also select the imager predefined mode in Profile
Settings by tapping Start > Profile Settings > Scanning.
3 Point the imager window at the bar code label, and hold the
computer steady a few inches from the label.
4 Press the Scan button. The laser pointer and illumination beam or
frame appear.
26
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
Scanning With the EA30 Imager
5 Use the laser pointer as a guide and aim toward the middle of the
bar code. Make sure that the illumination beam or frame covers the
bar code you are trying to decode.
When the computer successfully reads a bar code label, you hear a
high beep, and the Good Read LED turns on briefly.
6 Release the Scan button.
Inserting a microSD Card
You can use a microSD™ card to increase file storage and install
software. The computers support an optional 32 GB maximum
capacity microSD card.
Note: The computer resets when you open the card access door to
insert the microSD card. Make sure you completely close the card
access door before you use your computer.
Installing a microSD Card in a CN70 or CN70e
To install a microSD card on a CN70 or CN70e:
1 Press the Power button to turn off the computer.
2 Remove the battery.
70 Series Mobile Computer User’s Manual
27
Chapter 1 — Using the Computer
3 Remove the two Phillips screws and open the card access door.
4 Slide the SIM card door to the left to unlock it and open the door.
28
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
5 Slide the microSD card door towards the top of the computer to
unlock it and open the door.
6 Slide the microSD card into place.
7 Close the microSD card door and slide it towards the bottom of the
computer to lock it in place.
8 Close the SIM card door and slide it to the right to lock it in place.
9 Close the card access door and replace the two screws.
70 Series Mobile Computer User’s Manual
29
Chapter 1 — Using the Computer
10 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.
11 Press the Power button. The computer cold boots.
Installing a microSD Card in a CK70 or CK71
To install a microSD card on a CK70 or CK71:
1 Press the Power button to turn off the computer.
2 Remove the handstrap.
3 Remove the two screws that attach the interface adapter cover to
the back of the computer.
30
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
4 Slide the SIM card door to the left to unlock it and open the door.
5 Slide the microSD card door towards the top of the computer to
unlock it and open the door.
70 Series Mobile Computer User’s Manual
31
Chapter 1 — Using the Computer
6 Slide the microSD card into place.
7 Close the microSD card door and slide it towards the bottom of the
computer to lock it in place.
8 Close the SIM card door and slide it to the right to lock it in place.
9 Replace the interface adapter cover and attach with the two screws
removed in Step 2.
10 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.
11 Press the Power button. The computer cold boots.
Transferring Files To and From Your PC
You can use Microsoft ActiveSync (Windows XP or earlier) or Windows
Mobile Device Center (Windows Vista or Windows 7) to establish a
connection between your computer and a PC. After you connect to
your PC, you can transfer files, synchronize files, remotely debug, and
perform other device management activities. ActiveSync and Windows
Mobile Device Center are a free applications available from the
Microsoft web site at www.windowsmobile.com/getstarted.
32
70 Series Mobile Computer User’s Manual
Chapter 1 — Using the Computer
To establish an ActiveSync partnership between your computer and a
PC, you need to physically connect your computer to your PC using
these accessories:
• USB snap-on adapter (Model 1000AA07)
• USB cable
To transfer files to and from your PC:
1 Download ActiveSync from the Microsoft web site and install
ActiveSync on your PC.
2 Follow the onscreen instructions to establish a partnership. When
the partnership is established, the Microsoft ActiveSync screen
appears on your PC.
70 Series Mobile Computer User’s Manual
33
Chapter 1 — Using the Computer
34
70 Series Mobile Computer User’s Manual
2
Understanding the User Interface and
Intermec Applications
Use this chapter to learn about the Windows® Embedded
Handheld user interface and how to interact with the screen.
You can also use this chapter to learn about the Intermec
applications on your computer, as well as additional Intermec
applications you can download.
35
Chapter 2 — Understanding the User Interface and Intermec Applications
About the User Interface
The user interface for the Windows® Embedded Handheld 6.5
operating system is different from previous versions of Windows
Mobile. The interface is touch-friendly and easy to navigate. Use the
following sections to understand how to interact with Windows
Embedded Handheld 6.5.
About the Home Screen
When you turn on your mobile computer, the Home screen is the first
screen that appears. The Home screen contains three navigation bars:
the Title bar, the horizontal scroll bar, and the Tile bar.
The Windows Embedded Handheld 6.5 Home Screen
Title bar
Horizontal scroll bar
Tile bar
Use the Title bar icons to view the current status of information such
as signal strength and battery power remaining. For more information
on the Title bar icons, see “Title Bar Status Icons” on page 38 .
36
70 Series Mobile Computer User’s Manual
Chapter 2 — Understanding the User Interface and Intermec Applications
A horizontal scroll bar appears when you tap an icon in the Title bar.
This horizontal scroll bar makes it easy to access the applications
associated with the Tile bar icons. The horizontal scroll bar also
contains a magnifier which improves the touch experience by making
parts of the screen large enough to tap with your finger.
The horizontal scroll bar also replaces tabs within Windows screens
and allows for easier navigation.
Clock & Alarms Screen With Horizontal Scroll Bar
Use the Tile bar to navigate between screens and within applications.
The icons available on the Tile bar change depending on the
application you are using.
Interacting With the Screen
The Windows Embedded Handheld 6.5 interface supports the use of
gestures with the finger or stylus to move around the screen. The table
below explains the supported gestures.
Gesture
Description
Tap
Represents the left click of a mouse.
Double-tap
Represents the left double-click of a mouse.
Hold
Represents the right click of a mouse when you press and hold
on the screen and a context menu appears.
70 Series Mobile Computer User’s Manual
37
Chapter 2 — Understanding the User Interface and Intermec Applications
Gesture
Description
Flick
Initiates scrolling in the direction (horizontal or vertical) the
finger or stylus moves across the screen.
Pan
Press and hold on the screen and then drag in any direction.
Title Bar Status Icons
Tappable icons in the Title bar immediately show you the status of
your network, your phone, the volume, the battery, and the time. Use
the following table to understand what the icons mean.
Title Bar Status Icon Descriptions
Icon
Description
You have a new notification.
You have a new text message.
You have a new e-mail message.
You have a new instant message.
You missed a call.
The speakerphone is on.
The phone is roaming.
An alarm is set.
The microphone is on.
An internet call is in progress.
A Bluetooth headset is detected.
An ActiveSync connection has been established.
There was a problem with the ActiveSync synchronization.
38
70 Series Mobile Computer User’s Manual
Chapter 2 — Understanding the User Interface and Intermec Applications
Icon
Description
An ActiveSync synchronization is in progress over USB.
A UMTS network is available.
Connecting to a UMTS network.
A UMTS connection is active.
A 3G+ network is available.
An EDGE network is available.
Connecting to an EDGE network.
An EDGE connection is active.
A GPRS network is available.
Connecting to a GPRS network.
A GPRS connection is active.
An HSDPA network is available.
Connecting to an HSDPA network.
An HSDPA connection is active.
Bluetooth is on.
Wi-Fi is on but not connected, and no networks are detected.
Wi-Fi is not connected to a network, and other networks are
detected.
Other wireless networks are detected.
Connected to a wireless network.
70 Series Mobile Computer User’s Manual
39
Chapter 2 — Understanding the User Interface and Intermec Applications
Icon
Description
Synchronizing through a Wi-Fi connection.
Connected to a wireless network, and other networks are
detected.
Information about a new wireless network is available.
A network connection is active.
A network connection is inactive.
The phone has maximum signal strength.
The phone has no signal.
The phone capability is off.
The phone has no service.
The phone is searching for service.
Data is being transferred.
A voice call is in progress.
A voice call in on hold.
There is no SIM card present in the computer.
The volume is off and the phone is set to vibrate.
The volume is on.
The volume is off.
The battery has a full charge.
The battery has a high charge.
40
70 Series Mobile Computer User’s Manual
Chapter 2 — Understanding the User Interface and Intermec Applications
Icon
Description
The battery has a medium charge.
The battery has a low charge.
The battery has a very low charge.
The battery is attached to external power and is charging.
No battery is installed in the computer.
Call forwarding is on.
Voice mail is off.
GPS locator is off.
GPS locator is on.
Aligning the Screen
You may need to align your screen if you tap on one area and it
registers in a different part of the screen. Make sure you only use the
stylus to complete the alignment process.
To align the screen:
1 Tap Start (t) > Settings > System > Screen
2 Follow the prompts on the screen to complete the alignment
process.
About Intermec Applications
Intermec provides many useful applications to help you configure,
troubleshoot, and connect your computer to other devices and
networks. You can also download additional applications from the
Intermec web site to help you use all of the features of your computer.
70 Series Mobile Computer User’s Manual
41
Chapter 2 — Understanding the User Interface and Intermec Applications
Applications Available on the Mobile Computer
Use this table to understand some of the Intermec applications
available on your computer.
Intermec Applications Available on the Mobile Computer
Icon
Application
Description
Bluetooth
Audio
Use the Bluetooth Audio application to connect to a
Bluetooth headset or hands-free device. For more
information, see “Connecting to a Bluetooth
Audio Device” on page 75.
iGPS
You can use the iGPS application to improve the
performance of GPS on your computer. For more
information, see “Improving GPS Performance
on the Computer” on page 59. iGPS is only
available on computers with phone capability.
Intermec
Settings
Use Intermec Settings to configure your computer.
You can use Intermec Settings to individually
configure a computer or you can use it through
SmartSystems to configure all of your computers.
For more information, see “Using Intermec
Settings on the Computer” on page 62.
ISpyWiFi
Use ISpyWiFi to check your 802.11 status and
diagnose what is wrong with the connection. For
more information, see “Checking 802.11 Network
Status” on page 105.
Profile Settings Use Profile Settings to easily configure the
computer for a specific use. You can choose
predefined values for the Camera, Power, and
Scanning.
To apply a profile setting:
• Tap the Profile Setting you want to use.
You will see a message that changes are saved and a
check mark appears next to your choice.
For more information on modifying Profile Settings
options, see “Configuring Profile Settings With
Intermec Settings” on page 68.
Wireless
Center
42
Use the Wireless Center to turn radios (Wi-Fi,
Bluetooth, phone) on and off and configure settings
for each radio.
70 Series Mobile Computer User’s Manual
Chapter 2 — Understanding the User Interface and Intermec Applications
Icon
Application
Description
Wireless
Printing
Use the Wireless Printing application to connect to
a Bluetooth printer. For more information, see
“Connecting to a Bluetooth Printer” on page 74.
Wireless
Scanning
Use the Wireless Scanning application to connect to
a Bluetooth scanner. For more information, see
“Connecting to a Bluetooth Scanner” on page 72.
Applications You Can Download to the Mobile Computer
You can download several Intermec applications from the web site that
extend the capabilities of your 70 Series computer. All of the
applications listed below are available from the Intermec web site.
Some of the applications require the purchase of a license to run. To
find the application you want, go to www.intermec.com > Support >
Downloads and then enter the information to find your 70 Series
computer.
About eMDI
Intermec Enhanced Mobile Document Imaging Application (eMDI) is
a professional document capture application that enables you to
capture images of full page documents (8.5 x 11 or A4 paper sizes) with
the camera. You can transfer the images from your mobile computer
to a PC or server. For more information, see the Intermec Enhanced
Mobile Document Imaging User’s Guide. You can download and use
eMDI for a 30-day evaluation period. After the evaluation period
expires, you will need to purchase a license.
About Features Demo
Intermec Features Demo provides a simple way to explore the key
features of your mobile computer. You will find applications that
demonstrate scanning, document imaging, image capture, printing,
GPS functionality, and the digital compass. Many of the applications
that are part of Features Demo also have separate full-featured
versions that you can download and license for your computer.
70 Series Mobile Computer User’s Manual
43
Chapter 2 — Understanding the User Interface and Intermec Applications
About Image Capture
The Intermec Image Capture application is provided for use on the 70
Series computers with an EA30 imager. Image capture provides a way
for users to capture a high quality grayscale image with a mobile
computer. Image Capture also allows you to change settings to provide
the best image possible for the conditions present. You do not need to
license Image Capture.
About Intermec Browser
Intermec Browser is a locked-down web application for your computer
that is compatible with Microsoft™ Internet Explorer. You can
configure Intermec Browser for your specific application requirements
and design your own web pages. You can download and use Intermec
Browser for a 60-day evaluation period. After the evaluation period
expires, you will need to purchase a license.
About Intermec Connection Manager
Intermec Connection Manager is a software application and API
interface that provides seamless network roaming for Intermec mobile
computers configured with one or more wired or wireless technologies
(Ethernet, 802.11, GPRS, CDMA). Intermec Connection Manager
works in the background to automatically establish and maintain
connections. You can download and use Intermec Connection
Manager for a 60-day evaluation period. the evaluation period expires,
you will need to purchase a license.
About Intermec Launcher
Intermec Launcher 1.01 is a Microsoft® Windows® application,
designed for Intermec mobile computers, that provides a platform
from which other applications may be launched while attempting to
provide a locked-down environment. You can configure Intermec
Launcher for your specific application requirements. You can
download and use Intermec Launcher for a 60-day evaluation period.
After the evaluation period expires, you will need to purchase a license.
44
70 Series Mobile Computer User’s Manual
Chapter 2 — Understanding the User Interface and Intermec Applications
About Intermec Terminal Emulator (ITE)
Intermec Terminal Emulator (ITE), part of Intermec Client Pack (ICP),
is the next generation of Intermec’s popular terminal emulation client
designed for enterprise-level data collection. It provides a consistent
user interface and a common menu structure to simplify the use and
management of applications running on Intermec mobile and wireless
computers.
ITE is packed with enhancements that improve productivity, reduce
errors, and deliver fast return on investment. It supports multiple
emulation protocols in a single client and has new features such as
session persistence, remote management and configuration, and offers
a maintenance plan to keep you up-to-date with the latest releases and
upgrades. You can download and useITE for a 60-day evaluation
period. After the evaluation period expires, you will need to purchase a
license and maintenance plan.
About SmartSystems Foundation
SmartSystems™ Foundation is an easy-to-use software platform that
provides IT Administrators and Integrators a single, integrated portal
for hands-free provisioning, deployment, and management of
Intermec devices minimizing the effort spent on software upgrades,
equipment monitoring, maintenance and troubleshooting.
SmartSystems Foundation provides a consistent way to manage
Intermec devices including mobile computers, RFID readers, printers
and bar code scanners, located on-site or remote, to make the most of
limited IT resources, and lower the total cost of ownership for
Intermec data collection equipment. SmartSystems Foundation can
be downloaded at no charge from the Intermec web site. For more
information, visit www.intermec.com\SmartSystems.
70 Series Mobile Computer User’s Manual
45
Chapter 2 — Understanding the User Interface and Intermec Applications
46
70 Series Mobile Computer User’s Manual
3
Using the Phone
You can use the phone feature to make and receive telephone
calls, as well as transmit data through cellular wide-area
networks (WANs).
47
Chapter 3 — Using the Phone
About the Phone
The 70 Series mobile computer supports two types of cellular
technology:
• CDMA
• UMTS
Phone features on the computer include a speaker and a microphone.
You can also use a Bluetooth headset or hands-free kit. The phone
feature is enabled by default on WWAN-equipped mobile computers.
After you turn on the phone and activate service with your wireless
carrier, you can customize the phone features and network settings.
For more information, see the online help on your mobile computer.
Activating the UMTS Phone
You use a SIM card to activate the UMTS phone on your computer.
You can purchase the SIM card from your network provider.
To install the SIM card and activate the UMTS radio:
1 Press the Power button to turn off the computer.
2 On the CN70 or CN70e:
a Push the battery release tab forward until the battery releases,
and lift the battery away from the computer.
b Remove the two Phillips screws and open the card access door.
48
70 Series Mobile Computer User’s Manual
Chapter 3 — Using the Phone
3 On the CK70, remove the two screws and lift the card access door
away from the computer.
4 Slide the SIM card door to the left to unlock it and open the door.
5 Slide the SIM card into the slot in the card access door.
6 Close the SIM card door and slide it to the right to lock it in place.
7 Close the card access door and replace the two screws.
70 Series Mobile Computer User’s Manual
49
Chapter 3 — Using the Phone
8 Install the battery. Press down firmly on the bottom of the battery,
and make sure that the battery release tab is fully engaged.
9 Press the Power button. The computer cold boots.
Activating the CDMA Phone
To activate the CDMA radio module in your mobile computer, you
need to contact your wireless carrier and set up an account for each
mobile computer. The following table lists the carriers that Intermec
currently supports. If your carrier is not listed in the table, please
contact Intermec product support to see if it is now supported.
Currently Supported Carriers
Country
Carriers
United States
Sprint, Verizon
The carrier will require the Electronic Serial Number (ESN) to start the
activation process. You can find the ESN:
on a label located in the upper right corner of the battery
compartment.
• on the outside of the computer shipping box.
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Intermec representative can guide
you through the process.
•
After you supply the ESN to your carrier, they will respond with values
that you must enter using the Windows Mobile Activation Wizard (if
required). Some of the supported carriers do not require you to enter
any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate your
phone.
50
70 Series Mobile Computer User’s Manual
Chapter 3 — Using the Phone
Values Required for CDMA Phone
Carrier
Activation Method
Activation Values You Need
Sprint
Activation Wizard
• Master Subsidy Lock (MSL) or activation code
• MDN
• Mobile Station Identifier (MSID)
Verizon
• Dial *22899
• Activation Wizard
None. All parameters are automatically
transferred wirelessly.
After activation, the settings are permanently stored in the CDMA
module. Changing the OS or SSPB loads will not affect any of the
settings or activation parameters stored in the WAN modem.
Starting the Activation Wizard
Depending on your wireless carrier, you may need to use the Windows
Mobile Activation Wizard to activate your phone.
To start the activation wizard:
1 Tap Start > Phone, or tap the Phone button on the Tile bar.
The phone application starts.
2 Tap Menu > Activation Wizard.
Turning the Phone On and Off
Before you can start using your phone, you need to enable it. You can
use Wireless Center to enable and disable your phone, as well
Bluetooth and Wi-Fi communications.
To turn on the phone using Wireless Center:
1 Tap Start > Settings > Connections > Wireless Center.
2 Tap Phone to turn on the Phone
3 (Optional) To configure the phone, tap Menu in the tile bar at the
bottom of the screen.
4 Tap OK when you are done configuring the options.
5 Tap OK to close Wireless Center.
70 Series Mobile Computer User’s Manual
51
Chapter 3 — Using the Phone
Making a Phone Call
After you activate your phone, you are ready to start making phone
calls.
To make a phone call:
1 Press Phone.
2 Tap the keys to enter the telephone number you want to call, and
tap Talk.
Making an Emergency Phone Call
You can use the UMTS phone to make an emergency phone call even
if the SIM card is missing. When the SIM card is not installed, the
phone will show that you have no service. However, if you dial certain
emergency numbers (such as 112, 911, 000, 08, 118, 119, and 999) the
call will go through.
52
70 Series Mobile Computer User’s Manual
4
Using the Camera
You can use the color camera to take pictures and record
videos.
53
Chapter 4 — Using the Camera
About the Color Camera
The camera and flash are located on the back of the computer. You run
the Pictures & Videos application to access the camera features. In this
application, you can:
take, view, and edit pictures.
record and launch video clips stored on the computer or a microSD
card.
• configure camera options.
You can also send pictures and video clips to others or save an image
as the background on the Home screen. If you download the eMDI
application, it uses the camera to capture images.
•
•
Note: While the Pictures & Videos application is running, you cannot
use the imager.
Taking a Picture
You can take photos in high, normal, or low quality, with image sizes
up to 2048 x 1536 pixels. When you take a picture, the image is saved
as a .jpg file and stored in the /My Documents/My Pictures folder.
To take a picture:
1 Tap Start > Pictures & Videos.
2 Tap the Camera icon in the grid or the Camera button on the Tile
bar, or press Enter.
3 Using the screen as a viewfinder, move the camera until you have
the image you want to take a picture of.
4 Press Enter to take and save the picture. If you choose to save your
pictures to Main memory, they are saved to permanent storage on
your mobile computer.
54
70 Series Mobile Computer User’s Manual
Chapter 4 — Using the Camera
Recording a Video
You need to switch to video mode to record video. When you record
video, the video is saved as an .mp4 file and stored in the /My
Documents/My Pictures folder.
To switch to Video mode and record video:
1 Tap Start > Pictures & Videos.
2 Tap the Camera icon in the grid or the Camera button on the Tile
bar, or press Enter.
3 Tap Menu > Video.
In the lower right, the camera icon turns into a video camera. On
the Tile bar, the Record button replaces the Take Pic button.
4 Using the screen as a viewfinder, move the video camera until you
see the scene you want to video record.
5 Press Enter to start recording.
6 When you are done, tap Stop or press Enter to stop recording and
save the video.
If you choose to save your videos to Main memory, they are saved to
permanent storage on the computer.
Saving Pictures and Videos to an SD Card
Pictures and videos are automatically saved to the main memory on
your computer. You can save your pictures and video to an SD card to
easily transport them to another device.
To save picture and video files to an SD card:
1 Install a microSD card. For help, see “Inserting a microSD Card”
on page 27.
2 Tap Start > Pictures & Videos.
3 Tap the camera icon.
4 Tap Menu > Options.
5 From the Save files to list, select SD card, and tap OK.
70 Series Mobile Computer User’s Manual
55
Chapter 4 — Using the Camera
56
70 Series Mobile Computer User’s Manual
5
Using GPS
The 70 Series computer comes equipped with an integrated
Global Positioning System (GPS) receiver if your computer has
phone capability (WWAN radio). The GPS receiver can deliver
standards-based National Marine Electronics Association
(NMEA) data strings to GPS applications.
57
Chapter 5 — Using GPS
About the Integrated GPS on Your Computer
Intermec recommends that you use the GPS Intermediate Driver
(GPSID) instead of directly accessing the GPS hardware. The GPSID is
a Microsoft software component that interacts between applications
and the GPS hardware.
As a Microsoft software component, the GPSID:
•
•
allows multiple applications to simultaneously access the GPS data
stream.
provides access to GPS data without requiring applications to
recognize and parse NMEA syntax.
Using the GPSID Installed on the Computer
To use the GPSID installed on your mobile computer, you need to
configure the GPSID settings.
To configure your GPSID settings:
1 Tap Start > Settings > System > External GPS. The GPS Settings
screen appears with Programs selected.
58
70 Series Mobile Computer User’s Manual
Chapter 5 — Using GPS
2 Select the COM port that you want your programs to use to get
GPS data from your computer.
3 Tap Access in the horizontal scroll bar and select the Manage GPS
automatically check box.
4 Tap OK.
Improving GPS Performance on the Computer
Use the iGPS application to improve the performance of the GPS on
your CN70, CN70e, or CK70 computer. The integrated GPS module
has three operating modes:
• Standalone
• MS Assisted
• gpsOneXTRA™
In Standalone mode, the GPS module relies solely on GPS satellites to
determine position.
70 Series Mobile Computer User’s Manual
59
Chapter 5 — Using GPS
In MS Assisted mode, the computer can determine position without
receiving GPS signals directly from satellites; instead, the computer
receives GPS signals and information provided by the cellular network.
Even when the computer can receive a satellite signal, MS Assisted can
improve position accuracy and reduce the time to determine initial
position (Time-To-First-Fix). Check with your cell phone carrier for
availability and pricing for MS Assisted service.
Qualcomm’s gpsOneXTRA Assistance technology provides enhanced
operation for Standalone GPS. This option enables the UMTS-enabled
computer to automatically download a small assistance data file from
the XTRA servers through a brief internet access session.
Another option you can configure with iGPS is the fix interval. The fix
interval defines how often the GPS should provide new information.
Larger intervals use less power, but many applications require small
intervals to work correctly. The default for fix interval is 4.
Note: Anytime you change the GPS settings, the phone module will
reset automatically. It will not affect the functionality of the computer.
To improve GPS performance:
1 Go to Start > Settings > System > iGPS.
2 In the Fix Interval tab, enter a value for the fix interval. The default
setting is 4 and should be optimized for most applications.
3 Tap the Fix Type tab and select one of these options: Standalone
(1), MS assisted (2), or Enable gpsOneXTRA (check box).
4 Tap OK.
60
70 Series Mobile Computer User’s Manual
6
Configuring the Computer
Use this chapter to learn about the available methods for
configuring your mobile computer and how to use Intermec
Settings. You can also use this chapter to learn how to
configure network communications and wireless security.
61
Chapter 6 — Configuring the Computer
How to Configure the Computer
You can configure many parameters on the computer such as the bar
code symbologies it decodes or the network settings. The values you
set for these parameters determine how the computer operates.
There are several ways to configure the computer:
•
Directly on the computer. You can use Intermec Settings directly
on the computer to change only the settings on that computer. For
more information, see “Using Intermec Settings on the
Computer” on page 62.
•
Remotely using Intermec SmartSystems Foundation. When you
use SmartSystems, you can remotely configure all of your 70 Series
mobile computers as well as other SmartSystems-enabled Intermec
computers and peripherals. For more information, see “Using
Intermec Settings Remotely With SmartSystems Foundation”
on page 70.
You can use a third-party device management product that
supports the computer and Intermec Settings, such as Soti
MobiControl or Wavelink Avalanche. For more information, visit
the Device Management page on the Intermec web site.
You can also configure the computer with configuration bundles that
you create using SmartSystems Foundation. For more information,
see the SmartSystems Foundation online Help.
•
Using Intermec Settings on the Computer
Use Intermec Settings to configure parameters for Intermec
applications on the computer as well as some device-specific
parameters like volume. You can configure parameters for important
functions like data collection and communications.
62
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Starting Intermec Settings
Intermec Settings is located on the System screen.
To start Intermec Settings:
• Tap Start > Settings > System > Intermec Settings.
The Intermec Settings Main Menu appears.
About the Structure of Intermec Settings
Use the tables below to help find the parameters in Intermec Settings
that you want to configure. Each table contains the parameters for one
of the Intermec Settings Main Menu options.
If you see > next to a menu option, there are more screens available in
the next level. If you see ... next to a menu option, there is only one
more screen available.
Most parameters are saved as soon as you tap OK. Some settings such
as the Serial Port Switch require you to reboot the computer for the
changes to take effect.
70 Series Mobile Computer User’s Manual
63
Chapter 6 — Configuring the Computer
Data Collection Menu
Data Collection Options
Parameters You Can Configure
Internal Scanner
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bluetooth Scanner
Dock Tethered Scanner
Camera
Symbologies
Scanner settings
Imager settings
Decode security
Symbologies
Scanner settings
Imager settings
Decode security
Symbologies
Scanner settings
Scanner port settings
Imager settings
Decode security
Symbologies
Scanner settings
Camera settings
Decode security
BT-Configure on Connect
Bluetooth-configure on connect
Magstripe Reader
• Enable magstripe reader
• Reader model (read-only)
Communications Menu
Communications Options
Parameters You Can Configure
Device Name
Device name
802.11 Radio
• Security choice (supplicant)
• Security settings (includes Wi-Fi
settings such as enable/disable radio)
• IP settings
• Certificates
64
Ethernet Adapter
IP settings
Bluetooth
Bluetooth settings (power, discoverable,
connectable, and so on)
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Communications Options
Parameters You Can Configure
WWAN Radio
•
•
•
•
Serial Port Switch
Serial port switch settings (IrDA, docking
connector, and back interface)
Add WWAN connection
Edit WWAN connections
Manage WWAN radio
WWAN information
Device Settings Menu
Device Settings Options
Parameters You Can Configure
Date and Time
Date and time settings
Good Read
• Internal scanner
• Dock tethered scanner
• Bluetooth scanner
Volume
Volume settings (beeper and voice,
headset beeper, and vibrate mode)
Backlight
Backlight settings (display backlight,
keypad backlight, and light level)
Screen
Screen rotation
Keypad
Scan button remapping
Power Management
• Power button
• Battery power
• External power
Compass Settings
Compass settings (magnetic declination
and magnetic inclination)
Sensors
• Data streaming
• Screen rotation
• Device off
USB Connections
USB connections
System Component Versions
System component versions (read-only)
IDL Runtime Versions
ITC50 (read-only)
Profile Settings Application
Whether these parameter options appear
in Profile Settings:
• Camera
• Power
• Scanning
70 Series Mobile Computer User’s Manual
65
Chapter 6 — Configuring the Computer
Device Settings Options
Parameters You Can Configure
Features Disabled by Policy
None (read-only)
Printer Menu
Printer Options
Parameters You Can Configure
Printer (if connected through
Bluetooth)
Printer settings (Auto detect printer,
memory, display, and so on)
Note: The Printer menu displays settings for Bluetooth connected
printers. The settings that appear in the menu are dependent on the
printer that is paired with the device.
GPS Menu
GPS Options
GPS
Bread crumbing settings
SmartSystems Information Menu
SmartSystems Information Options Parameters You Can Configure
Identity
Identity information (hardware
version, firmware version, OS version,
and so on) (read-only)
Administrator
Administrator settings (name, phone,
and email)
Location
Location settings (country, state, city,
campus, and detail)
Information
Device Notes (read-only)
Virtual Wedge Menu
66
Virtual Wedge Options
Parameters You Can Configure
Enable Virtual Wedge
Enable virtual wedge
Bar Code Scanner Wedge
Bar code scanner wedge settings (bar code
scanner grid and label encoding)
Magstripe Reader Wedge
Magstripe Reader Grid
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Core Messaging Service Menu
Core Messaging Service Options
Parameters You Can Configure
Server IP
Server IP (read-only)
Associated Server IP
Associated server IP
Broadcast Name
Broadcast name
Port
Port (read-only)
Keep Alive Ping Interval
Keep alive ping interval
Device Monitor Menu
Device Monitor Options
Parameters You Can Configure
Device Health Controls
•
•
•
•
Device Health Screen Captures
Device health screen capture settings
(directory and screen capture allowed)
Disabled Executables
None (read-only)
Device Wipe
Device wipe settings (enable wipe and
interval)
Enable health data collection
Enable Blue light
Set rule file location
Set data refresh periods
License Manager Menu
License Manager Options
Parameters You Can Configure
About
About settings (read-only)
License Vault
None (displays applications that are
licensed)
Location Services Menu
Location Services Options
Parameters You Can Configure
Server
Server settings (port and enable server)
Virtual GPS
Virtual GPS settings
For more information on all parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
70 Series Mobile Computer User’s Manual
67
Chapter 6 — Configuring the Computer
Navigating in Intermec Settings
You can easily navigate through the screens in Intermec Settings to
find the parameter you need to configure.
To move down a level in Intermec Settings:
•
Tap the menu item in the list.
To move back a level in Intermec Settings:
•
Tap Back or Cancel on the Tile bar.
To save a parameter setting:
•
Tap OK.
To exit Intermec Settings:
•
Tap Menu > Exit or OK.
Configuring Profile Settings With Intermec Settings
A profile is a set of predefined values that you can easily apply to the
computer to ensure optimal performance in a specific scenario. The
end user does not need to figure out the “right” settings because we
have already done that work for you. Profile Settings is available from
the Start menu so you can make it available to the end user for easy
configuration.
Use Intermec Settings to determine the profiles you want the end user
to see in the Profile Settings application.
To configure the profile information an end user can access:
1 Go to Device Settings > Profile Settings Application.
2 Select Camera, Power, or Scanning.
3 From the Camera, Power, or Scanning submenu, check or clear the
Display check box for the settings you want to have available to the
end user.
4 Click OK to save your selection.
68
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Restoring Default Settings
You can easily restore a menu to its default settings or all of the
Intermec Settings parameters to their default settings if necessary.
To restore menu defaults:
1 Navigate to the menu that you want to restore to defaults.
2 Tap Menu > Restore Menu Defaults.
3 When prompted, tap Yes to restore the menu default settings.
4 If prompted to refresh the computer, tap Yes.
To restore all defaults:
1 Tap Menu > Restore All Defaults. The applications asks if you are
sure you want to restore all defaults.
2 Tap Yes.
After several minutes, all of the default settings are restored.
Hiding Menu Items in Intermec Settings
You can hide items in the Intermec Settings menus if you do not want
to have them available for other users to access. Hidden items are not
saved when you back up your settings in the SmartSystems console.
On the mobile computer, you can:
•
hide menu items by tapping and holding the item, and then
choosing Hide Menu Item from the popup list. When asked if you
want to hide the menu, tap Yes.
•
restore hidden items in a single menu, by tapping and holding the
menu bar where the item was hidden, and then choose Restore
Item Default from the popup list.
•
restore all hidden items in all menus, by tapping Menu > Unhide
All Items.
Note: When you restore default settings in Intermec Settings, only the
settings for visible items are restored to defaults. The settings for
hidden menu items are not affected.
70 Series Mobile Computer User’s Manual
69
Chapter 6 — Configuring the Computer
Using Intermec Settings Remotely With
SmartSystems Foundation
Your mobile computer is SmartSystems-enabled, which lets you open
Intermec Settings from the SmartSystems console to remotely
configure all of your mobile computers. For more information on
SmartSystems, see “Managing the Computer Using SmartSystems”
on page 92.
To open Intermec Settings from the SmartSystems console:
1 In the SmartSystems console, select a mobile computer and
right-click.
2 From the menu, select Intermec Settings.
3 Configure the settings you need to change. As you choose
parameters from the tree structure, help for each parameter
appears in the upper right pane of Intermec Settings.
4 When you are done making changes, choose File > Save Settings.
For help using Intermec Settings, click Help > Contents. For
information on all of the parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
About Network Communications
You can easily add the mobile comptuer to your wireless or wired data
collection network. You can connect your computer using:
•
802.11a/b/g/n radio communications.
•
Ethernet communications.
•
Bluetooth communications.
•
USB and serial communications.
Configuring 802.11a/b/g/n (Wi-Fi) Radio Communications
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.
70
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
The mobile computer contains an 802.11 radio to transfer data using
wireless communications and to support the TCP/IP network
protocols. This section of the manual assumes that your wireless
network is set up, including your access points.
By default, the 802.11 radio is disabled. Use the following procedure to
enable the Wi-Fi radio using Intermec Settings. If you would like to use
ScanNGo bar codes to easily enable the radio and set the default
security settings, see Appendix C “ScanNGo Wi-Fi Configuration
Bar Codes” on page 163.
To enable the Wi-Fi radio on your computer and configure
communications:
1 Tap Start > Settings > System > Intermec Settings.
2 From the Intermec Settings main menu, tap Communications >
802.11 Radio > Radio Enabled.
3 Select the Radio Enabled check box and tap OK. By default, the
computer uses Funk security and enables DHCP.
4 Use Intermec Settings to configure any other parameters you need
to use for communication with your network.
5 Configure 802.11 security. For help, see “About Wireless
Security” on page 79.
Configuring Ethernet Communications
To configure Ethernet communications, connect your mobile
computer to your Ethernet network using the Ethernet Snap-On
Adapter (Model 1000AA01) or an Ethernet dock.
To configure Ethernet communications:
1 Connect the Ethernet snap-on adapter to your mobile computer.
2 Connect the Ethernet cable from your network to the snap-on
adapter or dock.
Ethernet communications are automatically enabled on your
mobile computer.
3 Make sure that your computer is communicating with the network.
The network connection icon ( ) should appear on the title bar.
70 Series Mobile Computer User’s Manual
71
Chapter 6 — Configuring the Computer
Configuring Bluetooth Communications
Your mobile computer is Bluetooth™-enabled, which lets you connect
to other Bluetooth devices, such as scanners, printers, or audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
To turn on the Bluetooth radio and configure Bluetooth settings:
1 Tap Start > Settings > Bluetooth > Mode.
2 Select the Turn on Bluetooth check box.
3 (Optional) If you want your computer to be visible to other
Bluetooth devices, choose Make this device visible to other
devices.
4 Tap OK.
The Bluetooth radio maintains its state through a reboot or cold
boot and maintains virtual COM ports. But, if you clean boot your
computer you need to recreate pairings to devices.
Connecting to a Bluetooth Scanner
You can connect the computer to an Intermec Bluetooth scanner, such
as the SF51 or SR61.
72
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
To connect to an Intermec Bluetooth scanner:
1 Tap Start > Settings > System > Wireless Scanning.
2 Tap Add Device.
3 Select Quick Connect, Search, or Manual. Follow the onscreen
instruction to add a wireless scanner.
70 Series Mobile Computer User’s Manual
73
Chapter 6 — Configuring the Computer
Connecting to a Bluetooth Printer
To configure your computer for Bluetooth wireless printing, you need
to:
create an application that opens the wireless printing COM port on
your computer. For help, see the Bluetooth Resource Kit, which is
part of the Intermec Developer Library (IDL), available from the
Intermec web site at www.intermec.com/idl.
• select the current wireless printer on your computer. For help, see
the next procedure.
Note: You can also print wirelessly using Microsoft APIs with
Bluetooth extensions for Winsock and Bluetooth virtual COM ports.
For help, see the Bluetooth Resource Kit documentation.
•
To select the current wireless printer:
1 Tap Start > Settings > System > Wireless Printing.
2 Tap Search to find a printer, or tap Manual to enter a device
address. Follow the onscreen instructions to select the current
wireless printer.
3 (Optional) Tap Print Test Page. The printer prints out a test page.
74
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Connecting to a Bluetooth Audio Device
Use the Bluetooth Audio enabler to discover, activate, and connect to
Bluetooth audio devices such as a headset. This enables system sounds
to be monitored through the headset.
To connect to a Bluetooth audio device:
1 Tap Start > Settings > System > Bluetooth Audio.
2 Tap Search to find your Bluetooth headset or hands-free device.
3 Select your device from the list and configure any settings.
4 Click OK when you are done.
About Serial and USB Communications
You can use these 70 Series accessories to transmit data to and receive
data from another device through serial or USB communications:
• RS-232 Snap-On Adapter (Model 1000AA03)
• USB Snap-On Adapter (Model 1000AA07)
For more information about these accessories and how to order them,
see “70 Series Accessories” on page 7.
70 Series Mobile Computer User’s Manual
75
Chapter 6 — Configuring the Computer
Connecting to a Tethered Scanner
Use this procedure to connect your mobile computer to an SR30,
SR61T, or ASCII tethered scanner and enable RS-232
communications.
To connect the computer to a tethered scanner:
1 Tap Start > Settings > System > Intermec Settings >
Communication s > Serial Port Switch.
2 Select Standard docking and IrDA and tap OK.
3 Tap Back to return to the Main Menu.
4 Tap Data Collection > Dock Tethered Scanner > Enable
scanner auto-detect.
5 Select the Enable scanner auto-detect check box and tap OK.
6 Perform one of these items based on the type of scanner you are
connecting:
•
For an SR30 or SR61T scanner, tap Scanner Settings, select SR
Intermec Scanner, and then tap OK.
•
For an ASCII scanner, tap Scanner Settings, select ASCII, and
then tap OK. Set up the appropriate COM port settings by
selecting Scanner Port Settings.
7 Connect the RS-232 snap-on adapter with the attached scanner to
the bottom of the mobile computer.
Creating an ISP Connection
You can create an Internet Service Provider (ISP) connection to send
and receive e-mail messages using Messaging (Outlook E-mail) and
view web pages using Internet Explorer Mobile. You need to get your
ISP dial-up access telephone number, a user name, and a password
from your ISP.
To create an ISP Connection:
1 Tap Start > Settings > Connections > Connections.
2 Under My ISP, tap Add a new modem connection.
3 Enter a name for the connection, such as “ISP Connection.”
76
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
4 If you are using an external modem connected to your mobile
computer with a cable, select Hayes Compatible on COM1 from
the Select a modem list.
5 Tap Next.
6 Enter the access phone number and then tap Next.
7 Enter the User name, Password, and Domain (if provided by an
ISP or your network administrator).
8 Tap Finish.
9 On the Connections screen, tap Advanced on the horizontal scroll.
10 Tap Dialing Rules.
11 When the Enable Dialing Rules box appears, tap OK.
12 Tap Edit.
13 In the Name field, enter your phone type (Home, Mobile, or
Work).
14 Tap OK until you exit the Connections screen.
70 Series Mobile Computer User’s Manual
77
Chapter 6 — Configuring the Computer
Creating a VPN Server Connection
You can create a Virtual Private Network (VPN) connection to securely
connect to servers, such as a corporate network, through the Internet.
Before you can create a VPN connection, you need this information
from your network administrator:
• User name
• Password
• Domain name
• TCP/IP settings
• Host name or IP address of the VPN server
To create a VPN server connection:
1 Tap Start > Settings > Connections > Connections.
2 Under My Work Network, tap Add a new VPN server
connection.
3 Step through the screens to set up your VPN connection.
78
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
About Wireless Security
The computer provides four types of security for your wireless
network:
•
Wi-Fi Protected Access 2 (WPA2™)
•
Wi-Fi Protected Access (WPA)
•
802.1x
• WEP
This section explains how to configure wireless security on your
mobile computer. Intermec recommends that you implement WPA2
security using PSK (Personal) or 802.1X (Enterprise) key management
as appropriate.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section, “Choosing
Between Microsoft and Funk Security.”
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this
section also assumes that your authentication server and
authenticators are properly configured.
Note: Your security choice does not depend on your authentication
server. For example, you can choose Funk security if you use Microsoft
Active Directory® to issue certificates.
Choosing Between Microsoft and Funk Security
The computer supports both Funk and Microsoft security, which
dynamically select wireless networks based on your preferences. The
option you choose depends on your network security needs.
•
If you are using the computer in a static environment that requires
a high level of security, you should use Funk security, which offers
CCX v4.0 compliance, support for LEAP and TTLS, and
configuration for up to four profiles.
To use Funk security, you need to select a profile. For help, see the
next section, “Selecting a Funk Security Profile.”
70 Series Mobile Computer User’s Manual
79
Chapter 6 — Configuring the Computer
•
If you are primarily using the computer to connect to Wi-Fi
hotspots, you may want to use Microsoft security.
To use Microsoft security, you need to select it as your security
choice. For help, see “Selecting Microsoft as Your Security
Choice” on page 84.
Selecting a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles
let your computer communicate in different networks without having
to change all of your security settings. For example, you may want to
set up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile 1.
Selecting a Funk Security Profile
Use the following procedure to select a Funk security profile.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Choose a profile. A list of configurable settings appears.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Set an active profile by choosing it in the Active Profile list.
8 Save your settings.
Configuring WPA or WPA2 Enterprise (802.1x) Security With
Funk
Use these procedures to set WPA-802.1x or WPA2-802.1x security on
your comptuer with Funk security.
1 Make sure the communications and radio parameters on your 70
Series are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
80
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2. Encryption
automatically defaults to TKIP or AES, respectively.
7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
8 If you choose TTLS, EAP-FAST, or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
b Enter a User Name and User Password.
For Validate Server Certificate, choose Yes.
Note: The correct date must be set on your computer when you enable
Validate Server Certificate.
9 If you choose TLS:
a Load a user and root certificate on your computer. For help, see
“Loading a Certificate” on page 88.
b Enter a User Name and Subject Name.
For Validate Server Certificate, choose Yes.
Configuring WPA or WPA2 Personal (PSK) Security With Funk
Use the following procedure to configure WPA-PSK or WPA2-PSK
with Funk security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2.
7 For 8021x, choose None.
70 Series Mobile Computer User’s Manual
81
Chapter 6 — Configuring the Computer
8 For Pre-Shared Key, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the 70 Series internally converts it to
a pre-shared key. This value must match the passphrase on the
authenticator.
9 Save your settings.
Configuring 802.1x Security With Funk Security
Use the following procedure to configure 802.1x-WEP security with
Funk security. Intermec recommends that you use WPA2-802.1x
instead of 802.1x-WEP if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open.
7 For Encryption, choose WEP.
8 For 8021x, choose TTLS, PEAP, or TLS.
9 If you chose TTLS or PEAP:
a Enter a User Name.
b For Prompt for Credentials, choose Enter credentials now.
Enter a User Password.
d For Validate Server Certificate, choose Yes.
10 If you choose TLS:
a Load a user and root certificate on your computer. For help, see
“Loading a Certificate” on page 88.
b For Validate Server Certificate, choose Yes.
82
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Enter a User Name and Subject Name.
11 Save your settings.
Configuring Static WEP Security With Funk Security
Use the following procedure to configure static WEP security with
Funk. Intermec recommends that you use WPA2-PSK instead of WEP
if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open.
7 For Encryption, choose WEP.
8 For 8021x choose None.
9 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5- byte value for
64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be
preceded by 0x and contain 5 or 13 hex pairs.
10 For Transmit key, choose the key you want to use for transmitting
data.
11 Save your settings.
Using Open (No Security) Associations with Funk
Use the following procedure to configure your mobile computer for
open security using Funk.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Select the active profile you are using.
70 Series Mobile Computer User’s Manual
83
Chapter 6 — Configuring the Computer
4 For Association, choose Open.
5 For Encryption, choose None.
6 Tap OK. Your settings are saved.
Selecting Microsoft as Your Security Choice
The default security setting is Funk. If you want to use Microsoft
Wireless Zero Configuration (WZC) security, you need to select it as
your security choice. After you select Microsoft as your security choice,
you will be prompted to save your settings and reset the computer for
your change to take effect.
With Microsoft as your security choice, you can configure:
•
WPA
•
802.1x
•
Static WEP
Selecting Microsoft Security
Use the following procedure to select Microsoft security.
1 Start Intermec Settings. For help, see “Configuring the
Computer” on page 61.
2 Choose Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security. An alert
box appears telling you that you must save your settings and reboot
the computer for the new security choice to take effect.
4 Choose Yes. The computer resets and starts with Microsoft
Security as the Security Choice.
Configuring WPA or WPA2 Enterprise (802.1x) Security With
Microsoft
Use these procedures to set WPA-802.1x security on your computer
with Microsoft security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
84
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA or WPA2. Data
Encryption automatically defaults to TKIP.
6 For 802.1x Authentication, choose either TLS, or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and Domain and press Enter.
8 If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box appears.
b Choose Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
9 Save your settings.
Enabling WPA or WPA2 Personal (PSK) Security With Microsoft
Use the following procedure to enable WPA-PSK With Microsoft
Security.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
70 Series Mobile Computer User’s Manual
85
Chapter 6 — Configuring the Computer
6 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the computer internally converts it to
a pre-shared key.
7 Save your settings.
Configuring 802.1x Security with Microsoft
Use the following procedure to configure 802.1x security with
Microsoft security. Intermec recommends that you use WPA2-802.1x
instead of 802.1x-WEP if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose Open.
6 For Data Encryption, choose WEP.
7 For 802.1X Authentication, choose TLS or PEAP.
8 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box appears.
b Choose Select.
Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
9 If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box appears.
b Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the domain.
86
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
e Press Enter.
10 For Network Key Setting, choose Automatic.
11 Save your settings.
Configuring Static WEP Security With Microsoft
Use the following procedure to configure static WEP security with
Microsoft security. Intermec recommends that you use WPA2-PSK
instead of WEP if possible.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Network Authentication, choose Open.
5 For Data Encryption, choose WEP.
6 For Network Key Setting, choose Enter Key and Index.
7 For Network Key Value, enter an ASCII key or a hex key that is
either 5 bytes or 13 bytes long depending on the capability of the
radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit
WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex
pairs.
8 For Network Key Index, select the key you want to use for data
transmission.
9 Save your settings.
Using Open (No Security) Associations With Microsoft
Use the following procedure to configure your mobile computer for
open security using Microsoft WZC.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Microsoft Security.
3 For Network Authentication, choose Open.
70 Series Mobile Computer User’s Manual
87
Chapter 6 — Configuring the Computer
4 For Data Encryption, choose Disabled.
5 Tap OK. Your settings are saved.
Loading a Certificate
To use transport layer security (TLS) with WPA or 802.1x security, you
need a unique client certificate on the computer and a trusted root
certificate authority (CA) certificate. Certificates are pieces of
cryptographic data that guarantee a public key is associated with a
private key. They contain a public key and the entity name that owns
the key. Each certificate is issued by a certificate authority.
To import a certificate chain:
1 Start Intermec Settings.
2 Go to Start > Settings > System > Intermec Settings.
3 Tap Communications > 802.11 Radio > Certificates. The
Certificates screen appears.
4 To import a certificate chain:
a Tap Import Certificates to install the selected certificate.
b In the CertImportUI screen, tap the <<< button next to the
Select pfx to import text field.
88
70 Series Mobile Computer User’s Manual
Chapter 6 — Configuring the Computer
Select the root certificate from the list.
d Tap Import Certificate.
5 To import user and root certificates from a Microsoft IAS server:
a Tap Import Certificates.
b Tap Web Enrollment.
Enter the User, Password, and Server (IP address) to log into
the server.
d Tap OK. A dialog box appears asking if you want to load the
root certificate.
e Tap OK. The Enrollment Tool message box appears telling you
that the certificate has been added.
Tap OK to close the message box.
70 Series Mobile Computer User’s Manual
89
Chapter 6 — Configuring the Computer
90
70 Series Mobile Computer User’s Manual
7
Managing the Computer
Use this chapter to learn how to remotely update, configure,
and monitor your Intermec mobile computers. You will also
find information on installing and developing software
applications as well as how to upgrade the system software.
91
Chapter 7 — Managing the Computer
Managing the Computer in Your Network
When you have multiple mobile computers and peripherals in your
network, it is essential to have an easy way to manage updates,
configure all of the devices, and remotely troubleshoot problems.
Intermec provides a free device management software platform called
SmartSystems™ Foundation to help you manage your devices. You
can also purchase third-party device management software through a
vendor.
Managing the Computer Using SmartSystems
Intermec's SmartSystems Foundation is a software platform that lets
you manage all of your SmartSystems-enabled devices simultaneously
from a central server. The SmartSystems Foundation console displays
all SmartSystems-enabled computers and peripherals in your network.
Intermec SmartSystems Foundation Console
Through the Console, you can:
•
92
drag-and-drop configuration bundles, operating system updates,
and firmware upgrades to multiple computers.
70 Series Mobile Computer User’s Manual
Chapter 7 — Managing the Computer
save configuration settings from a single device and deploy those
settings to many devices simultaneously.
• remotely change settings on SmartSystems-enabled computers and
peripherals.
The SmartSystems Foundation console can report on asset locations
and battery status, making it easier to manage your mobile devices.
•
With a Provisioning license, SmartSystems Foundation can
automatically push software, configuration settings, and other files to
connected mobile computers. The license also enables ScanNGo,
which makes connecting additional mobile computers to your wireless
network as easy as reading bar codes. You can download SmartSystems
Foundation from the Intermec web site at no charge. For more
information, visit www.intermec.com\SmartSystems. To purchase a
Provisioning license, contact your local Intermec sales representative.
Managing the Computer Using Third-Party Software
You can use third-party software such as Wavelink Avalanche to
centrally manage your Intermec devices. Device management software
enables you to update software, increase security, track your assets,
and troubleshoot devices remotely. You can download the Wavelink
Enabler for the mobile computer from the Wavelink web site. For more
information, visit the Intermec web site and search for Wavelink
Avalanche or visit www.wavelink.com to download the enabler.
Developing and Installing Applications
Use the Intermec Resource Kits to develop applications to run on the
mobile computer. The Resource Kits are a library of C++, .NET, Java,
and web components grouped by functionality that you can use to
create applications for the computer. The Resource Kits are part of the
Intermec Developer Library (IDL), and can be downloaded from the
Intermec web site at www.intermec.com/idl.
For more information, see the Intermec Developer Library Resource Kit
Developer’s Guide.
70 Series Mobile Computer User’s Manual
93
Chapter 7 — Managing the Computer
Packaging Your Application
For very simple applications, the executable file may be the only file
you need to deploy. More typically, you will have a set of files to install.
Intermec recommends using .cab files to install your applications. The
computer uses standard Windows Mobile .cab files and will install
third-party .cab files.
Choosing a Target Location
You can have your .cab file place your application in any of these
memory locations on the mobile computer:
The ObjectStore.
The optional microSD card. Depending on available disk space,
you may want to consider installing your application files on the
microSD card. Using a card creates the Storage Card folder on the
computer.
• The non-volatile Flash File Store. Applications and data in the
Flash File Store will persist through a clean boot.
Note: The Flash File Store is erased if you reflash the operating system
image.
•
•
Files copied to any of these locations are safe when you cold boot the
computer as long as the AutoRun system is installed in the appropriate
location. When AutoRun is installed on the computer, all .cab files in
the CabFiles folder are automatically extracted after a cold boot. For
more information about AutoRun, see the Intermec Developer
Library Resource Kit Developer’s Guide.
Installing Applications Using SmartSystems Foundation
Console
You can use the SmartSystems console to drag-and-drop Intermec
applications onto your mobile computer. The console is part of
SmartSystems Foundation.
To install applications using SmartSystems Foundation Console:
1 Download your application file from the Intermec web site and
unzip it on your desktop PC.
94
70 Series Mobile Computer User’s Manual
Chapter 7 — Managing the Computer
2 Double-click the application file to install it. The application file
should appear in the Software Vault.
3 From the SmartSystems console in the Software Vault,
drag-and-drop the application onto each mobile computer in your
network, or drop the application on a group of computers
contained in a folder.
Installing Applications Using Microsoft ActiveSync
When you only have a few computers to update with applications, you
can copy files using Microsoft ActiveSync. This procedure assumes
that Microsoft ActiveSync is installed on your PC and is up and
running.
1 Connect to the mobile computer via ActiveSync.
2 Copy the .cab files from your development PC to the computer.
3 Reboot or cold boot the computer.
4 After the boot process is finished, browse to the .cab files and tap
the files to install them.
Installing Applications Using a Storage Card
Use a storage card to install applications on one computer at a time or
if you have no network connection.
To install applications using a storage card:
1 Copy your application file to the storage card.
2 Install the storage card in the mobile computer.
3 On the mobile computer, browse to the Storage Card folder and
run your application.
Launching Applications Automatically
There are two ways to launch an application automatically on a cold
boot:
•
Set up your .cab file to place a shortcut to the application in the
\Windows\StartUp directory at install time.
70 Series Mobile Computer User’s Manual
95
Chapter 7 — Managing the Computer
Use AutoRun.exe to start your application at boot time. AutoRun
ships on the computer and automates other operations.
At boot time, AutoRun executes any commands found in its data file,
AutoRun.dat. Follow the next procedure to create this data file for
your mobile computer.
•
For more information on AutoRun, see the Intermec Developer
Library Resource Kit Developer’s Guide.
To configure AutoRun:
1 In Notepad, create a file called AutoUser.dat.
2 Write this command in the file:
RUN “Path\AppName.exe” arg1, arg2, arg3
where:
Path is the path to the directory where the application resides.
AppName.exe is the application name.
arg1, arg2, and arg3 are optional command line arguments.
For example, to launch MyProgram.exe located in the Flash File
Store, the command is:
EXEC “Flash File Store\Apps\MyProgram.exe”
Because AutoRun handles quoted file names for the first
parameter, you can specify path names or file names containing
white spaces. AutoRun only supports one set of quotes per
command.
3 Copy AutoUser.dat to the \Windows\Startup directory on the
mobile computer.
Updating the System Software
The mobile computer uses Image Update to update the operating
system (OS) and the system software. Image Update uses incremental
packages to allow for smaller and faster updates because the contents
are stored in flash ROM.
96
70 Series Mobile Computer User’s Manual
Chapter 7 — Managing the Computer
Update packages persist through a cold or clean boot and cannot be
removed by the end user. The Image Update process also provides
strengthened security because all packages are signed. Image Update
packages (.pkg or .pks files) may contain elements such as .dll,
executable (.exe), and .cab files.
You can use either of these methods to update your mobile computer:
You can update multiple computers at the same time using the
SmartSystems Console. For help, see the next section, “Updating
Multiple Computers Using SmartSystems Console”.
• You can update individual computers by transferring the packages
to the mobile computer and then installing them from the mobile
computer.
If you are using SmartSystems Foundation to update the computer,
you can purchase a Provisioning License to send the Image Update
silently. For more information, see “Sending the Image Updates
Silently” on page 98.
•
Updating Multiple Computers Using SmartSystems Console
You can use the SmartSystems console to update the operating system
or system software on your mobile computer. The console is part of
SmartSystems Foundation and is available from the Intermec web site
through the Intermec Developer Library (IDL). Before you can update
your mobile computer, you need:
SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/idl and open the Device
Management page.
• the SmartSystems bundles you want to install. The SmartSystems
bundle contains the Image Update package file. These
SmartSystems bundles are available from the Intermec web site at
www.intermec.com. Go to Support > Downloads.
• a Provisioning license.
To update the mobile computer using SmartSystems Foundation:
•
1 Open the SmartSystems console.
2 Make sure the SmartSystems console and the mobile computer are
on the same subnet and they are connected wirelessly or through
Ethernet.
70 Series Mobile Computer User’s Manual
97
Chapter 7 — Managing the Computer
3 Make sure the mobile computer is in a powered dock or that power
management is disabled.
4 Download the SmartSystems bundle to your PC.
5 Double-click the SmartSystems bundle on your PC to extract the
update files to the software vault.
6 From the SmartSystems console, locate the bundles to install and
drag them to each mobile computer (or group in a folder) you want
to update. The SmartSystems console installs the update on your
mobile computers.
After the download is complete, your mobile computer begins the
update process and automatically performs a cold boot. The
computer then boots into a special Update Loader mode where the
computer has no network connections and is completely unusable.
This process can take anywhere from 30 seconds to 15 minutes
depending on the update.
After the update is complete, the computer boots again.
7 When a confirmation dialog box appears requesting user input,
dismiss it.
Note: The SmartSystems console indicates that your mobile
computer is offline, by displaying a red stop symbol, until the
computer reboots and reconnects to the system.
Sending the Image Updates Silently
If you want to automatically download and send update packages to
your mobile computers, you can purchase a Provisioning license. The
silent updates do not require any user intervention and begin when
you choose to have the update process start. SmartSystem Foundation
users are notified when update packages are released so that they can
download them and update their Intermec computers. For more
information, see the SmartSystems Foundation Help.
98
70 Series Mobile Computer User’s Manual
Chapter 7 — Managing the Computer
Updating Individual Mobile Computers
You can download update packages from your PC to the mobile
computer using Microsoft ActiveSync or any other file transfer
method you choose. If you need to download ActiveSync or the
Windows Mobile Device Center, go to
www.windowsmobile.com/getstarted.
To update an individual mobile computer:
1 Download the Image Update packages you want to install from the
Intermec web site at www.intermec.com. Go to Support >
Downloads.
2 Transfer the Image Update package from your PC to the mobile
computer.
3 On your mobile computer, tap Start > Programs > File Explorer
and navigate to the location of the Image Update package.
4 Double-tap the package to start the installation. Your mobile
computer begins the update process and automatically performs a
cold boot.
The computer then boots into a special Update Loader mode where
the computer has no network connections and is completely
unusable. This process can take anywhere from 30 seconds to 15
minutes depending on the update. After the update is complete,
the mobile computer boots again.
5 When a confirmation dialog box appears requesting user input,
dismiss it.
70 Series Mobile Computer User’s Manual
99
Chapter 7 — Managing the Computer
100
70 Series Mobile Computer User’s Manual
8
Troubleshooting and Maintaining the
Computer
If you encounter any problems while using the 70 Series
computer, look in this chapter to find a possible solution. You
will also find information on routine maintenance.
101
Chapter 8 — Troubleshooting and Maintaining the Computer
About the Intermec Dashboard
The Intermec Dashboard is designed to provide proactive monitoring
of your mobile computers to prevent downtime. You can easily see the
health of the device and can help pinpoint the source of a problem to
determine if it is hardware or software related.
Intermec Dashboard displays information such as the status of
network connections, battery usage, storage space, and internal
devices. It also provides system information such as the operating
system, firmware, and hardware configuration.
To launch the Intermec Dashboard:
•
Press the Intermec Dashboard button (m) on the computer keypad.
Intermec Dashboard Main Screen
Intermec Dashboard is highly integrated with SmartSystems
Foundation. You can use SmartSystems Foundation to remotely
monitor the health of your computers. For more information, refer to
the SmartSystems online help.
102
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
Troubleshooting Your Mobile Computer
Use the troubleshooting tables in this section to fix problems with the
Wi-Fi connection, 802.1x security, the imager, or general problems
with operating the mobile computer.
If you send the computer in for service, it is your responsibility to save
the computer data and configuration. Intermec is responsible only for
ensuring that the hardware matches the original configuration when
repairing or replacing the computer.
Troubleshooting the Wi-Fi Connection
Use this troubleshooting table to help solve problems with your
802.11 radio connection.
Problems With the Wi-Fi Connection
Problem
Solution
When you turn on the computer after it
was suspended for a while (10 to 15
minutes or longer), it can no longer send
or receive messages over the network.
Host may have deactivated or lost current terminal
emulation session. In a TCP/IP direct connect network,
turn off the “Keep Alive” message from host to
maintain the TCP session while the computer is
suspended.
The computer is connected to the network Move closer to an access point or to a different location
and you move to a new site to collect data. to reestablish communications until you reconnect
with the network.
Your computer now shows you are not
connected to the network.
The computer appears to be connected to
the network, but you cannot establish a
terminal emulation session with the host
computer.
There may be a problem with the host computer, or
with the connection between the access point and the
host computer. Check with the network administrator
to make sure the host is running and allowing users to
log in to the system.
The computer appears to be connected to
the network, but the host computer is not
receiving any information from the 70
Series computer.
There may be a problem with the connection between
the access point and the host computer. Check with the
network administrator or use your access point user’s
manual.
70 Series Mobile Computer User’s Manual
103
Chapter 8 — Troubleshooting and Maintaining the Computer
Problem
Solution
A network connection icon appears in the The computer may not be communicating with the
toolbar, but then disappears.
intended access point. Make sure the network name
matches the access point network name. Default
network name is “INTERMEC.”
The access point may not be communicating with the
server. Ensure the access point is turned on, properly
configured, and has 802.1x security enabled.
Troubleshooting 802.1x Security
Use the following table to troubleshoot problems with your 802.1x
security that will prevent you from connecting to your network, such
as a missing WEP key value or an incorrect password.
Problems With 802.1x Security
Problem
Solution
The computer indicates it is not
authenticated.
Make sure that:
• the User Name and Password parameters on the computer
must match the user name and password on authentication
server. You may need to reenter the password on both the
computer and authentication server.
• on your authentication server, the user and group are
allowed and the group policy is allowed to log into the
server. For help, see the documentation that shipped with
your authentication server software.
• the IP address and secret key for access point must match the
IP address and secret key on the authentication server. You
may need to reenter the IP address and secret key on both
your access point and authentication server.
• the authentication server software is running on the server
PC.
You receive a message saying “The Date and time are not saved when you perform a clean boot.
server certificate has expired or Reenter the date and time, and then save your changes.
your system date is incorrect”
after you perform a clean boot on
the computer.
104
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
Checking 802.11 Network Status
If you have trouble connecting to your 802.11 wireless network:
Make sure you have correctly set network parameters on the
computer.
• Check your wireless security settings.
Follow the next procedure to verify available access points and
networks, check signal strength, and view other diagnostics. If you
need to contact Intermec Product Support, this information can be
helpful in troubleshooting wireless network connection issues.
•
To verify the network status:
1 Tap Start > iSpyWiFi. The ISpyWiFi application launches.
The ISpyWiFi tab shows:
•
MAC address and IP address of the 802.11 radio.
•
network association status, including the SSID and MAC
address of the access point.
•
security configuration.
• radio transmit power and signal strength information.
2 Tap the Scan tab to view a list of available 802.11 networks. The list
includes the signal strength, channel, and MAC address for each
network.
• Tap Scan to refresh the screen.
3 Tap the Supp tab to view radio supplicant information, including
a list of supplicant events and authentication status.
•
To verify the settings for the currently active security profile, tap
Configure Profile. Intermec Settings launches for you to
configure 802.11 Radio settings.
•
To try reconnecting to the network, tap Reconnect.
•
To delete the events in the list, tap Clear Events.
70 Series Mobile Computer User’s Manual
105
Chapter 8 — Troubleshooting and Maintaining the Computer
4 Tap the Ping tab to run a ping test to the host.
To run a ping test:
a In the Host field, enter the IP address of the host.
b From the Repetitions list, choose the number of times the
computer will ping the host.
Tap Ping. The graph shows the amount of time it takes for the
host to return the ping. Tap List to see this information in a list
format.
5 Tap the RSSI tab to view the received signal strength of the host
signal.
The information box includes the current signal strength, host
SSID name, MAC address, data rate, and transmit power.
• Tap Mark to place an arrow marker above the graph.
6 Tap the Conf tab to set up a log file that lists RSSI history.
This screen includes the 802.11 radio driver version and available
radio modes.
To create a log file:
a Check the Log to File check box.
b (Optional) Change the sample period and number of samples
displayed.
Tap Log File. The Save As screen appears.
d (Optional) Change the name of the saved log file, the folder to
which the file will be saved, the content type (log or text), and
the location.
e Tap OK.
106
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
Troubleshooting Reading Bar Codes
Use this section to troubleshoot problems that may prevent you from
being able to read a bar code such as the symbology not be enabled.
Problems Reading Bar Codes
Problem
Solution
You cannot see the illumination • You may be too far away from the bar code label. Try moving
beam or frame from the imager
closer to the bar code label and scan it again.
when you press the Scan button • You may be reading the bar code label “straight on.” Change
and aim the imager at a bar code
the reading angle and try again.
label.
• The imager hardware trigger might be disabled in Intermec
Settings. To check the setting go to Start > Settings >
Systems > Data Collection > Scanner Settings. Hardware
trigger should be checked.
When you release a Scan button The Good Read light will remain on if you configure the
or handle trigger, the Good Read computer to use continuous/edge triggering. If you configure
light does not turn off.
the computer for level triggering and the Good Read light
remains on, there may be a problem. Press one of the Scan
buttons or pull the trigger again without scanning a bar code
label. If the light is still on, contact your local Intermec
representative.
The scanner will not read the bar • Aim the scanner beam to cross entire bar code label in one
code label.
pass. Vary the scanning angle.
• Check the quality of the bar code label, Scan a bar code label
that you know will scan. Compare the two bar code labels to
see if the bar code quality is too low. You may need to replace
the label that you cannot scan.
• Make sure the bar code symbology is enabled and
configured correctly. Use Intermec Settings to check the
symbologies. Expand Data Collection > Symbologies
beneath devices listed (scanner, virtual wedge) to check and
enable symbologies, then scan the bar code label again.
• Make sure the computer application is expecting input from
a bar code. You may need to type this information instead.
The scanner does not read the bar The scanner window may be dirty. Clean the window with a
code labels quickly, or the
solution of ammonia and water. Wipe dry. Do not allow
scanning beam seems to be faint abrasive material to touch the window.
or obscured.
70 Series Mobile Computer User’s Manual
107
Chapter 8 — Troubleshooting and Maintaining the Computer
Problem
Solution
You scan a valid bar code label to
enter data for your application.
The data decoded by the scan
module does not match the data
encoded in the bar code label.
The computer may have decoded the bar code label in a
symbology other than the label’s actual symbology. Try
scanning the bar code label again. Make sure you scan the
entire label.
The input device attached to the Set the Scanner Model command to the specific attached input
computer does not work well or device. Check enabled bar code symbologies and enable only
read bar code labels very quickly. the symbologies being used.
Troubleshooting Operating the Computer
Use this section to troubleshoot problems that may prevent you from
being able to operate the computer.
Problems Operating the Computer
Problem
Solution
You press the Power button and Try the following solutions:
nothing happens.
• Replace or charge the battery. The battery may be completely
drained.
• Remove the battery and press the Reset button to perform a
cold boot. For help, see“Cold Booting the Computer” on
page 110.
The computer appears to be
locked up and you cannot enter
data.
• Press the Power button and select Suspend from the Power
Options menu. Press the Power button to turn the screen
back on.
• Press the Power button and select Reboot from the Power
Options menu.
• Remove the battery and press the Reset button to perform a
cold boot. For help, see“Cold Booting the Computer” on
page 110.
• Try reloading the firmware. For help, see “Updating the
System Software” on page 96.
• If the computer does not boot or reset, contact your
Intermec representative for help.
You tap the screen and nothing
happens.
Align your screen. For help, see “Aligning the Screen” on page
41.
You cannot type a character on
the keypad or you can only type
uppercase or lowercase letters.
You may have locked a modifier key on the keypad. Press the
necessary key sequence to unlock the key. For help, see “About
the Keypad” on page 15.
108
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
Calling Product Support
If you cannot find the answer to your problem in the
“Troubleshooting the Computer” section, you can visit the Intermec
technical knowledge base (Knowledge Central) at
intermec.custhelp.com to review technical information or to request
technical support. If you still need help after visiting Knowledge
Central, you may need to call Product Support.
To talk to an Intermec Product Support representative, call:
1-800-755-5505
Before you can call Intermec Product Support, make sure you have the
following information ready:
Configuration number
Serial number
Operating system version
SmartSystems Platform Bundle (SSPB) version
If you are using security, know the type (Funk or Microsoft) and the
full set of parameters
• Power management settings
• If you are using Intermec terminal emulation (ITE), know the
version and protocol. If you are not using ITE, know the language
your custom application was written in and the tools you used to
create it.
You can find most of the information listed above in Intermec
Settings. Consult your application developer for information on your
custom application.
•
•
•
•
•
Finding Your Configuration Number
Use the following procedure to help you find the configuration
number of your computer.
•
Look at the label on the back of the computer.
70 Series Mobile Computer User’s Manual
109
Chapter 8 — Troubleshooting and Maintaining the Computer
Finding Your Operating System Version
Use the following procedure to find the OS version of your mobile
computer.
1 Press the Intermec Dashboard (m) button to launch the
Dashboard.
2 Tap the Information bar. The Information Details page appears
and displays information such as the firmware version and the OS
version.
Resetting the Computer
If the computer does not resume after pressing the Power button, or if
the computer or an application locks up, you may need to reset the
computer. The computer uses the configuration currently saved in
flash memory during the boot process. There are three ways to reset the
computer:
•
•
•
Reboot
Cold boot
Clean boot
Rebooting the Computer
You may need to reboot the computer to correct conditions where an
application stops responding to the system.
To reboot the computer:
•
Press the Power button and select Reboot from the menu.
The computer systematically shuts down, restarts, and goes
through the initialization process.
Cold Booting the Computer
In some cases where the computer completely stops responding, it may
be necessary to perform a cold boot or hard reset. Because cold booting
may result in data loss, use this method only if all other recovery
methods have failed.
110
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
Note: Cold booting the computer does not guarantee that cached disk
data will be saved, so transactional data may be lost during the reset.
All other data, such as configuration and network settings, is
preserved.
To cold boot the mobile computer:
1 Press the Power button to suspend the computer.
2 Remove the handstrap and the battery pack.
3 Press the Reset button in the battery compartment on the back of
the computer.
4 Replace the battery and the handstrap. The mobile computer
boots. When the cold boot is complete, the Home screen appears.
Location of CN70/CN70e Reset Button
Reset button
Location of CK70/CK71 Reset Button
Reset button
70 Series Mobile Computer User’s Manual
111
Chapter 8 — Troubleshooting and Maintaining the Computer
Clean Booting the Computer
A clean boot erases the memory in the mobile computer,
including all applications and data files , with the exception of
those found in the Flash File Store, or any removeable storage.
If the computer seems to be locked up, try cold booting it. If this
process does not work, use a clean boot to get the computer up and
running for further troubleshooting. You can clean boot using the
mobile computer, or you can clean boot using the SmartSystems
Console:
•
To clean boot the mobile computer:
Remove the battery pack from the back of the computer.
2 With a stylus, press the Reset button in the battery cavity.
3 Insert the battery back into the computer, and immediately
press and hold the Power button and Volume Down button
(the lower button on the right side).
4 Continue to hold the Power button and the Volume Down
button down until you are prompted to release them.
5 Press the Volume Up button on the right side to start the clean
boot.
6 Wait for the computer to load files from its ROM.
•
To clean boot the computer using the SmartSystems Console, right
click on the 70 Series computer and select Intermec Power Tools
> Clean Boot Device.
Cleaning the Computer
To keep the computer in good working order, you may need to clean
the imager window, color camera window, and the touch screen. Clean
the windows and the touch screen as often as needed for the
environment in which you are using the computer. To clean the
computer, use a solution of ammonia and water.
112
70 Series Mobile Computer User’s Manual
Chapter 8 — Troubleshooting and Maintaining the Computer
There are no user-serviceable parts inside the 70 Series computer.
Opening the computer will void the warranty and may cause
damage to the internal components.
To clean the image window, camera window, and touch screen:
1 Press the Power button and choose to suspend the computer.
2 Dip a clean cloth towel in the ammonia solution and wring out the
excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
70 Series Mobile Computer User’s Manual
113
Chapter 8 — Troubleshooting and Maintaining the Computer
114
70 Series Mobile Computer User’s Manual
A
Specifications and Default Settings
115
Appendix A — Specifications and Default Settings
Physical and Environmental Specifications
CN70 Physical Dimensions
Dimensions 16.9 x 8.0 x 3.4 cm (6.66 x 3.14 x 1.35 in)
Weight
450 g (15.2 oz) with battery
CN70e Physical Dimensions
Dimensions 19.5 x 8.0 x 3.4 cm (7.66 x 3.14 x 1.35 in)
Weight
491 g (16.6 oz) with battery
CK70 Physical Dimensions
Dimensions 23.7 x 8.0 x 4.3 cm (9.33 x 3.16 x 1.69 in)
Weight
562 g (19 oz) with battery
CK71 Physical Dimensions
Dimensions 23.7 x 8.0 x 5.0 cm (9.33 x 3.16 x 1.98 in)
Weight
584 g (19.75 oz) with battery
Environmental Specifications
Operating temperature
-20°C to 60°C (-4°F to 140°F)
Storage temperature
-30°C to 70°C (-22°F to 158°F)
Charging temperature
0°C to 45°C (32°F to 113°F)
Relative humidity (operating)
5% to 95% non-condensing
Environmental rating
IP67 compliant
Drop Specifications
All corners and sides from 1.8 m (6 ft) per
MIL-STD 810F
Power and Electrical Specifications
Battery type
116
Rechargeable Lithium-ion (Li-ion) battery
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Battery capacity
CN70/CN70e: 3.7 V, 4000 mAh (14.8 Wh)
CK70/CK71:
3.7 V, 5200 mAh (19.2 Wh)
Electrical rating x 4.37/4.8 V; 2/1,5 A
Operating System
Microsoft Windows Embedded Handheld.
Hardware
Main processor
TI OMAP3, 600 MHz
Memory
512 MB RAM
Persistent storage
1 GB Flash
Removable storage
up to 32 GB user-accessible microSD card slot
Keypad
CN70: QWERTY, Numeric
CN70e: QWERTY Numeric, Numeric
CK70: Large Alpha, Alphanumeric
CK71: Numeric Function, Alphanumeric
Imaging options
5 megapixel color camera and EA30 area imager
(all), EV12 (CK71 only), or EX25 (CK71 only)
Back Accessory Interface Pin-outs
The back accessory interface provides power for peripheral devices out
the back of the CK70 and CK71 computers.
Pin
Pin Name
I/O
Description
OTB_PWR
Output
Power supply for peripheral
GND
OTB_RX
Input
DTE Data Receive
OTB_TX
Output
DTE Data Transmit
OTB_I/O_Voltage
Input
I/O Voltage Level
OTB_ID
BiDir
One Wire Bus for ID
OTB_RTS
Output
DTE Ready do Send
OTB_CTS
Input
DTE Clear to Send
70 Series Mobile Computer User’s Manual
117
Appendix A — Specifications and Default Settings
Touch Screen Specifications
Transmissive VGA display with high-durability touch screen; 480 x
640 pixels; 8.9 cm (3.5 in) diagonal active area; LED backlight and
ambient light sensor.
Standard Communications
•
•
•
•
•
•
UMTS (not available on CK71)
CDMA (not available on CK71)
GPS (not available on CK71)
802.11a/b/g/n
Bluetooth
USB high speed 2.0 OTG©
Wireless LAN
Standards compliant IEEE 802.11a/b/g/n (2.4 GHz and 5 GHz), Single
Stream
Data rates
up to 72Mbps
Security
802.11i, WPA, 802.1a/b/g/n, WEP
(EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST
Certifications
WPA2™ (Enterprise, Personal), WPA™ (Enterprise,
Personal), Wi-Fi, WMM®, WMM Power Save, Cisco
Compatible Extensions (CCX 4.0)
Regulatory Approvals
FCC, CE, cULus Listed, DEMKO
118
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Bar Code Symbologies
The imagers support all of the bar code symbologies listed in the next table.
Supported Bar Code Symbologies
AustraliaPost*
GS1 DataBar Omni-Directional
Aztec*
Infomail
BPO*
Interleaved 2 of 5
Canada Post
Japan Post*
China Post
KoreanPost
Codabar
Matrix 2 of 5
Codablock A
Maxicode*
Codablock F
Micro PDF417*
Code 11
MSI
Code 39
PDF417*
Code 93
Planet*
Code 128/GS1-128
Plessey
DataMatrix*
Postnet*
Dutch Post*
QR Code*
EAN/UPC
Standard 2 of 5
GS1 Composite*
SwedenPost
GS1 DataBar Expanded
Telepen
GS1 DataBar Limited
TLC 39
* These symbologies are not supported with the EV12 imager in the
CK71.
Imager Reading Distances
Typical reading distances are done in an office environment using
office lights (4 lux). Minimum distances are measured in the dark (0
lux). Both reading distances are provided in respective scan engine
integration guides. Contact your local Intermec representative for
more information.
70 Series Mobile Computer User’s Manual
119
Appendix A — Specifications and Default Settings
Below are the typical and minimum standard reading distances for the
70 Series computer built with an EA30 imager. Also included are
typical and minimum standard reading distances for the CK71 with an
EV12 or EX25 imager.
Note: Minimum distances depend on the length of the bar code.
EA30 Area Imager Minimum Reading Distances
Minimum distances are measured in the dark (0 lux).
0"
4"
8"
12"
16"
20"
24"
28"
in
12"
30
Data Matrix 10 mils
8"
20
PDF417 10 mils
4"
10
0"
4"
10
0.125mm/5 mils
EAN/UPC
8"
20
0.5 mm / 20 mils
12"
30
1 mm / 40 mils
cm
120
10
20
30
40
50
60
70
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
EA30 Minimum Reading Distances
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.1 mm (4 mils)
0.1250 mm (5 mils)
0.5 mm (20 mils)
1 mm (40 mils)
9.5 cm (3.74 in)
8 cm (3.15 in)
7 cm (2.76 in)
9.5 cm (3.74 in)
10.5 cm (4.13 in)
14 cm (5.51 in)
45 cm (17.72 in)
62 cm (24.41 in)
UPC/EAN 100%
0.33 mm (13.0 mils)
6 cm (2.36 in)
31.5 cm (12.4 in)
Data Matrix
0.18 mm (7 mils)
0.25 mm (10 mils)
0.38 mm (15 mils)
8 cm (3.15 in)
6.5 cm (2.56 in)
5.5 cm (2.17 in)
15.5 cm (6.1 in)
21.5 cm (8.46 in)
31.5 cm (12.4 in)
PDF417
0.25 mm (10 mils)
038 mm (15 mils)
5.5 cm (2.17 in)
7 cm (2.76 in)
25 cm (9.84 in)
34 cm (13.39 in)
EA30 Area Imager Typical Reading Distances
Typical distances are measured in an office environment (250 lux).
0"
4"
8"
12"
16"
20"
24"
28"
32"
36"
in
12"
30
Data Matrix 10 mils
8"
20
PDF417 10 mils
4"
10
0"
4"
10
0.125mm/5 mils
EAN/UPC
8"
20
0.5 mm / 20 mils
12"
30
1 mm / 40 mils
cm
10
70 Series Mobile Computer User’s Manual
20
30
40
50
60
70
80
90
121
Appendix A — Specifications and Default Settings
EA30 Typical Reading Distances
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.1 mm (4 mils)
0.125 mm (5 mils)
0.5 mm (20 mils)
1 mm (40 mils)
9.5 cm (3.74 in)
8 cm (3.15 in)
6.5 cm (2.56 in)
9.5 cm (3.74 in)
11.5 cm (4.53 in)
14.5 cm (5.71 in)
50 cm (19.69 in)
75 cm (29.53 in)
UPC/EAN 100%
0.33 mm (13.0 mils)
6 cm (2.36 in)
34 cm (13.39 in)
Data Matrix
0.18 mm (7 mils)
0.25 mm (10 mils)
0.38 mm (15 mils)
7.5 cm (2.95 in)
6 cm (2.36 in)
5.5 cm (2.17 in)
16.5 cm (6.5 in)
23 cm (9.06 in)
34.5 cm (13.58 in)
PDF417
0.25 mm (10 mils)
0.38 mm (15 mils)
5.5 cm (2.17 in)
6.5 cm (2.56 in)
26 cm (10.24 in)
37 cm (14.57 in)
122
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
EV12 Linear Imager Minimum Reading Distances
The illustration below does not include the 0.12 cm (0.05 in) setback
for the CK71. Minimum reading distances are measured in the dark (0
lux).
0"
in
2"
4"
8"
6"
10"
12"
14"
16"
8"
20
7"
6"
15
EAN/UPC 100%
5"
4"
10
3"
2"
1"
0"
1"
2"
3"
0.125 mm / 5 mils
10
4"
0.25 mm / 10 mils
5"
6"
15
0.5 mm / 20 mils
7"
1 mm / 40 mils
20
8"
cm
10
15
20
25
30
35
40
EV12 Miniumum Reading Distances With 0.12 cm (0.05 in) Setback
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.15 mm (6 mils)
0.25 mm (10 ils)
0.5 mm (20 mils)
1 mm (40 mils)
9.6 cm (3.8 in)
7.1 cm (2.9 in)
6.1 cm (2.5 in)
8.1 cm (3.2 in)
17.9 cm (7.1 in)
20.9 cm (8.3 in)
26.9 cm (10.6 in)
33.9 cm (13.4 in)
EAN/UPC
0.33 mm (13 mils)
6.1 cm (2.5 in)
22.9 cm (9.1 in)
70 Series Mobile Computer User’s Manual
123
Appendix A — Specifications and Default Settings
EV12 LInear Imager Typical Reading Distances
The illustration below does not include the 0.12 cm (0.05 in) setback
for the CK71. Typical reading distances are measured in an office
environment (200 lux).
0"
in
4"
8"
12"
16"
20"
24"
28"
32"
36"
16"
40
14"
12"
30
10"
EAN/UPC 100%
8"
20
6"
10
4"
2"
0"
2"
10
4"
6"
0.125 mm / 5 mils
20
8"
0.25 mm / 10 mils
10"
12"
30
0.5 mm / 20 mils
14"
1 mm / 40 mils
40
16"
cm
10
20
30
40
50
60
70
80
90
EV12 Typical Reading Distances With 0.12 cm (0.05 in) Setback
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.15 mm (6 mils)
0.25 mm (10 ils)
0.5 mm (20 mils)
1 mm (40 mils)
9.6 cm (3.8 in)
6.1 cm (2.5 in)
5.1 cm (2.1 in)
7.1 cm (2.9 in)**
19.9 cm (7.9 in)
24.9 cm (9.8 in)
34.9 cm (13.8 in)
50.9 cm (20.1 in)
EAN/UPC
0.33 mm (13 mils)
5.1 cm (2.1 in)
27.9 cm (11.0 in)
** Minimum distance depends on bar code width and scan angle.
124
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
EX25 Near-Far Range Imager Minimum Reading
Distance
Minimum reading distances are measured in the dark (0 lux). The
following graphic does not include the 0.24 cm (0.09 in) setback for
the CK71.
0”
16”
32”
48”
64”
80”
96”
128”
112”
144”
160”
176”
in
80”
200
64”
160
100% EAN contrast UPC
48”
120
32”
80
16”
40
0”
16”
40
32”
80
0.25 mm/10 mils
48”
120
0.5 mm/20 mils
1 mm/40 mils
64”
160
1.4 mm/55 mils
200
80”
cm
50
100
150
200
250
300
350
400
450
EX25 Minimum Reading Distances With 0.24 cm (0.09 in) Setback
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.08 mm (3 mils)
0.1 mm (2.8 mils)
0.25 mm (10 mils)
0.5 mm (20 mils)
1 mm (40 mils)
1.3 mm (51 mils)
15 cm (5.91 in)
15 cm (5.91 in)
15 cm (5.91 in)
16 cm (6.30 in)
25 cm (9.84 in)
40 cm (15.75 in)
35 cm (13.78 in)
45 cm (17.72 in)
115 cm (45.28 in)
210 cm (82.68 in)
310 cm (122.05 in)
310 cm (122.05 in)
EAN 100%
0.33 mm (13 mils)
15 cm (5.91 in)
145 cm (57.09 in)
70 Series Mobile Computer User’s Manual
125
Appendix A — Specifications and Default Settings
EX25 Near-Far Range Imager Typical Reading Distance
Typical reading distances are measured in an office environment (200
lux). The following graphics do not include the 0.24 cm (0.09 in)
setback for the CK71.
EX25 Near-Far Range Imager 1D Typical Reading Distances
0”
40”
80”
120”
160”
200”
240”
280”
320”
360”
400”
440”
480”
in
160”
400
128”
320
100% EAN
contrast UPC
96”
240
64”
160
32”
80
0”
32”
80
0.25 mm
10 mils
160
64”
0.5 mm/20 mils
240
1 mm/40 mils
96”
128”
320
2.5 mm/100 mils
400
160”
cm
100
200
300
400
500
600
700
800
900
1000
1100
1200
EX25 1D Symbologies Typical Reading Distances With 0.24 cm (0.09
in) Setback
Symbology
Density
Minimum Distance
Maximum Distance
Code 39
0.25 mm (10 mils)
0.5 mm (20 mils)
1 mm (40 mils)
1.4 mm (55 mils)
2.5 mm (100 mils)
15 cm (5.91 in)
16 cm (6.30 in)
25 cm (9.84 in)
40 cm (15.75 in)
**
135 cm (53.15 in)
280 cm (110.24 in)
550 cm (216.54 in)
720 cm (283.46 in)
1200 cm (472.44 in)
Code 128
retro-reflective
2.5 mm (100 mils)
**
1300 cm (511.81 in)
EAN 100%
0.33 mm (13 mils)
15 cm (5.91 in)
160 cm (62.99 in)
126
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
** Minimum distance depends on bar code width and scan angle.
EX25 Near-Far Range Imager 2D Typical Reading Distances
0”
40”
80”
120”
160”
200”
240”
280”
320”
360”
400”
440”
480”
in
160”
400
128”
320
96”
240
64”
160
32”
80
0”
32”
80
0.25 mm
10 mils
160
64”
0.76 mm/30 mils
240
1.4 mm/55 mils
96”
128”
320
2.5 mm/100 mils
400
160”
cm
100
200
300
400
500
600
700
800
900
1000
1100
1200
EX25 2D Symbologies Typical Reading Distances With 0.24 cm (0.09
in) Setback
Symbology
Density
Minimum Distance
Maximum Distance
DataMatrix
0.25 mm (10 mils)
0.76 mm (30 mils)
1.4 mm (55 mils)
2.5 mm (100 mils)
7.5 mm (300 mils)
15 cm (5.91 in)
25 cm (9.84 in)
**
**
20 cm (7.87 in)
90 cm (35.43 in)
310 cm (122.05 in)
450 cm (177.17 in)
1100 cm (433.07 in)
1524 cm (600 in)
** Minimum distance depends on bar code width and scan angle.
70 Series Mobile Computer User’s Manual
127
Appendix A — Specifications and Default Settings
Default Configuration
The following tables list the default values of the configuration
settings supported on the mobile computer. If you restore the mobile
computer to factory default settings, the mobile computer uses these
values.
The settings are grouped by function and reflect the organization of
Intermec Settings. Not all of the configuration settings are listed in
this appendix. For detailed information on most of the settings, see the
Intermec Settings Command Reference Manual.
Data Collection Settings
Use data collection settings to configure the imager and to configure
the bar codes that you want the imager to be able to read.
Data Collection Settings
Data Collection Setting
Default Value
Enable Scanner/Camera Port
On
BT-Configure On Connect
Overwrite with computer
settings
Enable Magstripe Reader
Disable
Symbology Settings
Symbology
128
Default Value
AustraliaPost
Disable
Aztec
Disable
BPO
Disable
CanadaPost
Disable
Codabar
Disable
Codablock A
Disable
Codablock F
Disable
Code 11
Disable
Code 39
Enable
Code 93
Disable
Code 128/GS1-128
Enable
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Symbology
Default Value
DataMatrix
Enable
DutchPost
Disable
EAN/UPC
Enable UPC A, UPC E, EAN
8, EAN 13
GS1 Composite
Disable
GS1 DataBar Expanded
Disable
GS1 DataBar Limited
Disable
GS1 DataBar Omni-Directional
Disable
Infomail
Disable
Intelligent Mail
Disable
Interleaved 2 of 5
Disable
JapanPost
Disable
Matrix 2 of 5
Disable
Maxicode
Disable
Micro PDF417
Disable
MSI
Disable
PDF417
Enable
Planet
Disable
Plessey
Disable
Postnet
Disable
QR Code
Disable
Standard 2 of 5
Disable
SwedenPost
Disable
Telepen
Disable
TLC 39
Disable
Symbology Option Settings
Symbology Option Settings
Default Value
Preamble
None (Disabled)
Postamble
None (Disabled)
Symbology Identifier
Disable
Multicode
Disable
70 Series Mobile Computer User’s Manual
129
Appendix A — Specifications and Default Settings
Scanner Settings
Scanner Settings
Default Value
Trigger Predefined Modes
Level
Trigger Mode
Level
Aimer Mode
Typical aimer
Hardware Trigger
Enable
Trigger Timeout (sec)
Aiming Duration (msec)
500
Turn Off After Good Read
Enable/One-shot
Imager Settings
Imager Settings
Default Value
Predefined Modes
1D and 2D Standard
Image File Location
\My Documents\MDI
Signature Image Capture
Disable
Document Imaging
Disable
Image Capture
Output Compression
Output Compression Quality
Edge Enhancement
Noise Reduction
Subsampling
Image Rotation
Image Lighting Correction
JPEG
60
None
None
None
Disable
Decode Security Settings
Decode Security Settings
130
Default Value
Consecutive Data Validation
Identical Consecutive Timeout
300 ms
Different Consecutive Timeout
Center Decoding
Disable
Center Decoding Tolerance
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Communications
Use communications settings to configure how the mobile computer
communicates with the network.
Communications Settings
Communications Setting
Default Value
Device Name
IntermecCXXX (where XXX
indicates the model of
mobile compuer)
802.11 Radio Settings
802.11 Radio Setting
Default Value
Security Choice
Funk
Allow Security Changes
Enabled
Active Profile
Profile 1
DHCP
Enabled
Import Root Certificates
False
Import User Certificates
False
Import Pac Files
False
Radio Bands
a/b/g (2.4 and 5.0 GHz)
Radio Enabled
Off
Ethernet Adapter Settings
Ethernet Adapter Setting
Default Value
DHCP
Enabled
Bluetooth Settings
Bluetooth Setting
Default Value
Bluetooth Power
Off
WWAN Radio Settings
WWAN Radio Setting
Default Value
WWAN Radio Enabled
Disable
70 Series Mobile Computer User’s Manual
131
Appendix A — Specifications and Default Settings
Serial Port Switch
Serial Port Switch Setting
Default Value
Serial Port Switch
Standard Docking and IrDA
Device Settings
Use device settings to configure settings on the mobile computer.
Device Settings
Device Setting
Default Value
Date
Null
Time
Null
Beeper and Voice
Medium
Headset Beeper
Very Low
Vibrate Mode Intensity
1 Strong Pulse
Good Read Settings
Good Read Setting
Default Value
Internal Scanner Good Read Beep
One Beep
Dock Tethered Scanner
One Beep
Bluetooth Scanner Good Read Beep
One Beep
Backlight Settings
Backlight Setting
Default Value
Display Backlight Adjustment
Normal
Keypad Backlight
On Based on Light Level
Light Level
Low
Screen Settings
132
Screen Setting
Default Value
Screen Rotations
Portrait 0 Degrees
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Keypad Settings
Keypad Setting
Default Value
Scan Button Remapping
Scanner
Power Management Settings
Power Management Setting
Default Value
Enable Power Button Screen
On
Screen Options Displayed
Hibernate, Suspend, Reboot
Screen Timeout (Seconds)
Power Button Behavior
Suspend
Device Turns Off After (Battery Power)
5 minutes
Screen Turns Off After (Battery Power)
Disabled
Device Turns Off After (External Power)
Disabled
Screen Turns Off After (External Power)
Disabled
Compass Settings
Compass Setting
Default Value
Magnetic Declination
Use defaults
Magnetic Inclination
Use defaults
Sensors Settings
Sensors Setting
Default Value
Screen Rotation
Disabled
Device Off
Disabled
Profiles Settings Application
Profiles Settings
Default Value
Camera
Disable Camera Scan
Enable Camera Scan
Show Option in Profile Settings
Show Option in Profile Settings
Power
Always On
Maximize Battery Life
Normal
Show Option in Profile Settings
Show Option in Profile Settings
Show Option in Profile Settings
70 Series Mobile Computer User’s Manual
133
Appendix A — Specifications and Default Settings
Profiles Settings
Default Value
Scanning
1D Bar Codes Optimized
Bright Sunlight
Reflective Labels
Standard
Show Option in Profile Settings
Show Option in Profile Settings
Show Option in Profile Settings
Show Option in Profile Settings
GPS Settings
Use GPS settings to configure how the mobile computer
communicates with the GPS network.
GPS
GPS Setting
Default Value
Enable Bread Crumbing
Disable
Core Messaging Service Settings
Use core messaging service settings to configure the .
Core Messaging Service
Core Messaging Service Setting
Default Value
Associated Server IP
Null
Broadcast Name
INTERMEC
Port
62241
Keep Alive Ping Interval
30 Seconds
Device Monitor Settings
Use device monitor settings to configure how the mobile computer
monitors the network.
Device Health Controls
134
Device Health Setting
Default Value
Enable Health Data Collection
On
Enable Device Health Application
On
Enable Blue Light
Off for Ready-to-Work
Set Rule File Location
\SmartSystems\HealthRules.txt
70 Series Mobile Computer User’s Manual
Appendix A — Specifications and Default Settings
Device Health Setting
Default Value
System Device Health Refresh (seconds) 90
Network Device Health Refresh (seconds) 45
Device Health Screen Captures
Device Health Screen Captures Setting
Default Value
Directory
\SmartSystems\ScreenCapture
Screen Captures Allowed
Device Wipe
Device Wipe Setting
Default Value
Enable Wipe
Disabled
Interval (in days)
Null
Virtual Wedge Settings
Use virtual wedge settings to configure the virtual wedge.
Virtual Wedge Setting
Setting
Default Value
Virtual Wedge
Enable
Bar Code Scanner Grid
Null
Label Encoding (Code Page)
1252
Magstripe Reader Grid
Null
70 Series Mobile Computer User’s Manual
135
Appendix A — Specifications and Default Settings
136
70 Series Mobile Computer User’s Manual
B
Keypads and Keystrokes
137
Appendix B — Keypads and Keystrokes
Standard Characters
Use the following tables to learn how to enter standard and other
available characters and functions with the keypad. If there is no
sequence of keystrokes for a particular character or function, it is only
available through the soft input panel (SIP), which you can access by
tapping the keyboard icon on the touch screen.
CN70 Keypads and Keystrokes
CN70 Alphanumeric Characters
Character
Numeric Keypad
QWERTY Keypad
c2
c22
c222
c3
c33
c333
c4
c44
c444
c5
c55
c555
c6
c66
c666
138
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Keypad
c7
c77
c777
c7777
c8
c88
c888
c9
c99
c999
c9999
c12
c122
c1222
c13
c133
c1333
c14
c144
c1444
c15
yA
yB
yC
yD
yE
yF
yG
yH
yI
yJ
70 Series Mobile Computer User’s Manual
139
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Keypad
c155
c1555
c16
c166
c1666
c17
c177
c1777
c17777
c18
c188
c1888
c19
c199
c1999
c19999
yK
yL
yM
yN
yO
yP
yQ
yR
yS
yT
yU
yV
yW
yX
yY
yZ
b,
bY
bU
bI
bH
140
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Keypad
bJ
bK
bB
bN
bM
CN70 Characters and Functions
To Enter
Numeric Keypad
QWERTY Keypad
@ (at symbol)
N/A
& (ampersand)
N/A
* (asterisk)
: (colon)
N/A
, (comma)
N/A
$ (dollar)
N/A
! (exclamation)
N/A
- (hyphen)
% (percent)
N/A
. (period)
b#
bQ
bS
bC
bD
bX
bE
bO
bG
bR
bT
bV
bA
bZ
+ (plus)
# (pound)
? (question mark)
N/A
‘ (apostrophe)
N/A
70 Series Mobile Computer User’s Manual
141
Appendix B — Keypads and Keystrokes
To Enter
Numeric Keypad
QWERTY Keypad
Forward Tab
c1
b|
b or c
c0
b m or c m
yy
bP
b or y
bm
Backspace
Up Arrow
Down Arrow
Left Arrow
Right Arrow
CapsLock
Enter
ok
Shift
Space
Start (Windows)
Esc
Talk
End Call
Intermec Dashboard
142
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
CN70e Keypads and Keystrokes
CN70e Alphanumeric Characters
Character
Numeric Keypad
QWERTY Numeric Keypad
c2
c22
c222
c3
c33
c333
c4
c44
c444
c5
c55
c555
c6
c66
c666
c7
c77
c777
c7777
70 Series Mobile Computer User’s Manual
143
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Numeric Keypad
c8
c88
c888
c9
c99
c999
c9999
c12
c122
c1222
c13
c133
c1333
c14
c144
c1444
c15
c155
c1555
c16
c166
yA
yB
yC
yD
yE
yF
yG
yH
yI
yJ
yK
yL
yM
yN
144
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Numeric Keypad
c1666
c17
c177
c1777
c17777
c18
c188
c1888
c19
c199
c1999
c19999
yO
yP
yQ
yR
yS
yT
yU
yV
yW
yX
yY
yZ
70 Series Mobile Computer User’s Manual
145
Appendix B — Keypads and Keystrokes
Character
Numeric Keypad
QWERTY Numeric Keypad
CN70e Characters and Functions
To Enter
Numeric Keypad
QWERTY Numeric Keypad
@ (at symbol)
N/A
& (ampersand)
N/A
* (asterisk)
: (colon)
N/A
, (comma)
N/A
$ (dollar)
N/A
! (exclamation)
N/A
- (hyphen)
% (percent)
N/A
. (period)
b#
bQ
bU
bI
bE
bO
bR
b#
bY
bW
+ (plus)
# (pound)
? (question mark)
N/A
‘ (apostrophe)
N/A
Forward Tab
Backspace
Up Arrow
Down Arrow
146
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
To Enter
Numeric Keypad
QWERTY Numeric Keypad
Left Arrow
c1
b|
b or c
c0
b m or c m
yy
b|
b or y
bm
Right Arrow
CapsLock
Enter
ok
Shift
Space
Start (Windows)
Esc
Talk
End Call
Intermec Dashboard
CK70 Keypads and Keystrokes
CK70 Alphanumeric Characters
Character
Large Alpha Keypad
Alphanumeric Keypad
70 Series Mobile Computer User’s Manual
147
Appendix B — Keypads and Keystrokes
Character
Large Alpha Keypad
Alphanumeric Keypad
yA
yA
148
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Large Alpha Keypad
Alphanumeric Keypad
yB
yC
yD
yE
yF
yG
yH
yI
yJ
yK
yL
yM
yN
yO
yP
yQ
yR
yS
yT
yU
yV
yB
yC
yD
yE
yF
yG
yH
yI
yJ
yK
yL
yM
yN
yO
yP
yQ
yR
yS
yT
yU
yV
70 Series Mobile Computer User’s Manual
149
Appendix B — Keypads and Keystrokes
Character
Large Alpha Keypad
Alphanumeric Keypad
yW
yX
yY
yZ
bP
bD
bE
bF
bG
bH
bI
bK
bL
bM
yW
yX
yY
yZ
CK70 Characters and Functions
To Enter
Large Alpha Keypad
Alphanumeric Keypad
@ (at symbol)
bS
bW
bO
bJ
cJ
N/A
& (ampersand)
* (asterisk)
: (colon)
; (semicolon)
150
bU
b0
b2
b5
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
To Enter
Large Alpha Keypad
Alphanumeric Keypad
, (comma)
bT
cS
cW
cX
cO
bX
bQ
cQ
cT
bY
cY
cN
bN
bV
cV
cX
$ (dollar)
! (exclamation)
- (hyphen or minus)
% (percent)
. (period)
+ (plus)
# (pound)
? (question mark)
‘ (apostrophe)
= (equals)
_ (underscore)
> (greater than)
< (less than)
[ (left square bracket)
] (right square bracket)
{ (left curly brace)
N/A
} (right curly brace)
N/A
~ (tilde)
N/A
\ (backslash)
cU
bU
/ (forward slash)
70 Series Mobile Computer User’s Manual
N/A
N/A
cs
N/A
bs
c0
cY
bY
bS
cX
cV
bV
bT
cT
bU
cU
bW
c8
b8
151
Appendix B — Keypads and Keystrokes
To Enter
Large Alpha Keypad
Alphanumeric Keypad
“ (quotes)
N/A
bZ
( (left parenthesis)
bR
cR
bZ
cZ
bs
N/A
) (right parenthesis)
Insert
Delete
Sym
¦ (broken vertical bar)
̀ (grave)
Forward Tab
Backspace
Up Arrow
Down Arrow
Left Arrow
Right Arrow
CapsLock
Enter
ok
Shift
Space
Start (Windows)
Esc
152
N/A
N/A
yy
cm
b m or c m
N/A
b4
b6
N/A
cS
cW
yy
cm
b m or c m
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
To Enter
Large Alpha Keypad
Alphanumeric Keypad
Alt
N/A
Alt
Ctrl
Ctrl
Ctrl
Send Call
bA
bC
c1
c3
To Enter
Large Alpha Keypad
Alphanumeric Keypad
F1
cD
cE
cF
cG
cH
cI
cK
cL
cM
cP
¡
¢
£
¤
¥
b¡
b¢
b£
b¤
b¥
bA
bB
bC
bD
bE
End Call
Intermec Dashboard
CK70 Function Keys
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
N/A
N/A
N/A
N/A
N/A
70 Series Mobile Computer User’s Manual
153
Appendix B — Keypads and Keystrokes
To Enter
Large Alpha Keypad
F16
Alphanumeric Keypad
bF
bG
bH
bI
bJ
bK
bL
bM
bN
N/A
F17
N/A
F18
N/A
F19
N/A
F20
N/A
F21
N/A
F22
N/A
F23
N/A
F24
N/A
CK71 Keypads and Keystrokes
CK71 Alphanumeric Characters
Character
Numeric With Function Keys Keypad
Alphanumeric Keypad
b7
b8
b9
b4
b5
b6
b1
b2
b3
154
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Numeric With Function Keys Keypad
Alphanumeric Keypad
b0
bb¡
b¢
b£
b¤
b¥
b¦
b§
b¨
b©
bª
b«
b¬
bm
b Ctrl
b Alt
by7
by8
by9
by4
yA
yB
yC
yD
70 Series Mobile Computer User’s Manual
155
Appendix B — Keypads and Keystrokes
Character
Numeric With Function Keys Keypad
Alphanumeric Keypad
by5
by6
by1
by2
by3
by0
byby¡
by¢
by£
by¤
by¥
by¦
by§
by¨
by©
byª
by«
by¬
bym
b y Ctrl
yE
yF
yG
yH
yI
yJ
yK
yL
yM
yN
yO
yP
yQ
yR
yS
yT
yU
yV
yW
yX
yY
156
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
Character
Numeric With Function Keys Keypad
Alphanumeric Keypad
b y Alt
yZ
CK71 Characters and Functions
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
: (colon)
cs
; (semicolon)
N/A
b8
b5
cX
, (comma)
$ (dollar)
! (exclamation)
- (hyphen or minus)
. (period)
+ (plus)
N/A
cS
cW
N/A
70 Series Mobile Computer User’s Manual
N/A
N/A
cs
bs
157
Appendix B — Keypads and Keystrokes
To Enter
‘ (apostrophe)
= (equals)
_ (underscore)
> (greater than)
< (less than)
[ (left square bracket)
] (right square bracket)
Numeric With Function Keys Keypad
N/A
N/A
cN/A
N/A
N/A
N/A
{ (left curly brace)
N/A
} (right curly brace)
N/A
~ (tilde)
N/A
\ (backslash)
c Alt
c Ctrl
/ (forward slash)
“ (quotes)
N/A
Insert
bl
c4
Delete
¦ (broken vertical bar)
̀ (grave)
Forward Tab
Backspace
Up Arrow
Down Arrow
158
N/A
N/A
Alphanumeric Keypad
bY
bS
cX
cV
bV
bT
cT
bU
cU
bW
c2
b2
bZ
b4
b6
cS
cW
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
Left Arrow
yy
cm
b m or c m
yy
cm
b m or c m
b|
Right Arrow
CapsLock
Enter
ok
Shift
Space
Start (Windows)
Esc
Alt
Alt
Ctrl
Ctrl
Ctrl
Intermec Dashboard
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
F1
¡
¢
£
¤
¥
¦
§
¡
¢
£
¤
¥
b¡
b¢
CK71 Function Keys
F2
F3
F4
F5
F6
F7
70 Series Mobile Computer User’s Manual
159
Appendix B — Keypads and Keystrokes
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
F8
¨
©
ª
«
¬
c¡
c¢
c£
c¤
c¥
c¦
c§
c¨
c©
cª
c«
c¬
b£
b¤
b¥
bA
bB
bC
bD
bE
bF
bG
bH
bI
bJ
bK
bL
bM
bN
F9
F10
F11
F12
F13
F14
F15
F16
F17
F18
F19
F20
F21
F22
F23
F24
160
70 Series Mobile Computer User’s Manual
Appendix B — Keypads and Keystrokes
CK71 Intermec Terminal Emulation (ITE) Keys
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
Attention
c0
Autolog
N/A
Clear
b6
Duplicate
N/A
EEOF
N/A
Erase
N/A
cA
c¤
c6
cD
c¥
cE
cF
c1
c1
cG
b3
cI
cH
cK
cM
cO
cN
b9
c¡
c¢
Find
Field +
Field Fieldmark
Help
Hex
Home
Keypad
Menu
Mode
New Line
Next Screen
PA1
PA2
N/A
cx
bx
N/A
N/A
N/A
c.
N/A
N/A
N/A
N/A
c9
c1
c2
70 Series Mobile Computer User’s Manual
161
Appendix B — Keypads and Keystrokes
To Enter
Numeric With Function Keys Keypad
Alphanumeric Keypad
PA3
c3
cd
c£
cd
cP
c7
cR
c|
ce
c5
c8
cQ
bd
Page
Print
N/A
Previous Screen
c7
Remove
N/A
Reset
c|
ce
c5
c8
br
Return
Roll Down
Roll Up
System Request
View
View Down
View Up
162
N/A
bd
bu
N/A
N/A
70 Series Mobile Computer User’s Manual
C
ScanNGo Wi-Fi Configuration Bar Codes
You can use the ScanNGo Wi-Fi configuration bar codes to
quickly configure the 802.11 radio in your computer.
163
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
Radio Configuration Bar Codes
Use the following ScanNGo bar codes to enable the 802.11 radio and
set the defaults for either Funk or Microsoft Wireless Zero
Configuration security. After you scan the bar codes, you will still need
to use Intermec Settings or another configuration program to set
network-specific settings on your computer and to configure the
wireless security.
The CN70, CN70e, and CK70 are available with the EA30 imager only.
The CK71 has three imager options: the EA30, EX25, or EV12 imager.
If your CK71 has an EA30 or EX25 imager, use the 2D configuration
bar codes to configure the radio. If your CK71 has an EV12 imager, use
the 1D configuration bar codes to configure the radio. You can find
out what imager is in your CK71 by opening Intermec Settings and
tapping Data Collection > Internal Scanner > Scanner Settings.
The following ScanNGo bar codes were created using SmartSystems
Foundation. For more information on SmartSystems Foundation, see
“Managing the Computer Using SmartSystems” on page 92.
2D Configuration Bar Codes
Follow these directions to configure the computer with a 2D imager
(EA30 or EX25):
1 Scan the appropriate bar code from the table and wait for the
program to start.
2 Follow any instructions on the device.
164
70 Series Mobile Computer User’s Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
2D Imager Radio Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi - set Funk defaults
Enable Wi-Fi radio - set Microsoft WZC defaults
1D Configuration Bar Codes
Follow these directions to configure the computer with a 1D imager
(EV12):
1) Scan the START HERE bar code from the table and wait for the
program to start.
2) Scan the bar code labeled 1/13 or 1/20 depending of the wireless
security you want to use.
3) Scan the rest of the bar codes in any order.
4) Follow any instructions on the device.
70 Series Mobile Computer User’s Manual
165
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
1D Imager Radio Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi - set Funk defaults
166
70 Series Mobile Computer User’s Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi - set Funk defaults
(continued)
70 Series Mobile Computer User’s Manual
167
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi - set Funk defaults
(continued)
Enable Wi-Fi radio - set Microsoft
WZC defaults
168
70 Series Mobile Computer User’s Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi radio - set Microsoft
WZC defaults (continued)
70 Series Mobile Computer User’s Manual
169
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi radio - set Microsoft
WZC defaults (continued)
170
70 Series Mobile Computer User’s Manual
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
To Configure These Settings:
Scan This Bar Code
Enable Wi-Fi radio - set Microsoft
WZC defaults (continued)
70 Series Mobile Computer User’s Manual
171
Appendix C — ScanNGo Wi-Fi Configuration Bar Codes
172
70 Series Mobile Computer User’s Manual
I
Index
173
Index
Symbols
.cab files, using to install
applications 94
Numerics
70 Series
computer models 2
features 4
802.11 communications,
configuring 71
802.11 network status
troubleshooting 105
802.11 radio, default settings 131
802.1x security
configuring with Funk 82
configuring with Microsoft 86
troubleshooting 104
with Funk 82
accessories, described 7
activation wizard, starting 51
ActiveSync
downloading 99
establishing a partnership 33
using to install applications 95
aligning the screen 41
alpha with numeric keypad
illustrated 17
keypresses, listed 147–154
alphanumeric keypad
illustrated 17
keypresses, listed 147–162
applications
developing with Intermec
Resource Kits 93
installing with a storage card 95
installing with ActiveSync 95
installing with Console 94
Intermec 42
Intermec, available for download
43
Intermec, available on computer
42
launching automatically 95
packaging 94
troubleshooting 110
174
ASCII scanner, connecting 76
audio device, connecting with
Bluetooth 75
audio snap-on adapter, described 7
AutoRun, description 94
AutoRun.exe, using to start
application 95
back accessory interface pin-outs
117
backlight
configuring screen 24
keypad behavior 17
bar code
default symbology settings 128
reading 26
reading, troubleshooting 107
symbologies 119
bar codes, radio configuration 164
battery
about 8
battery icons, described 12
charging 9
charging accessories 9
checking the status 12
conserving battery life 14
descriptions 7
status LED 13
Bluetooth
audio device, connecting to 75
printer, connecting to 74
scanner, connecting to 72
Bluetooth Audio application
description 42
Bluetooth communications,
configuring 72–75
calling product support 109
camera
description 54
CDMA phone
activating 50
carriers 50
certificate, loading 88
changing the battery 9
70 Series Mobile Computer User’s Manual
Index
characters
entering on CK70/CK71 keypad
22
entering on numeric keypad 21
entering on QWERTY keypad 20
entering with keystrokes 138
charging accessories, battery 9
charging the battery 9
CK70
keypads, illustrated 17
status LEDs 5, 6
CK70/CK71
battery, described 7
entering characters on keypad
22
magstripe reader adapter,
described 7
CK71
keypads, illustrated 17
status LEDs 6
clean boot, performing 112
cleaning computer 112
CN70
keypads, illustrated 15
status LEDs 5
CN70/CN70e
vehicle dock, described 8
vehicle holder, described 8
CN70/CN70e battery, described 7
cold boot, performing 110
communications
802.11, configuring 71
Bluetooth, configuring 72–75
default settings 131
Ethernet, configuring 71
serial 75
USB 75
configuration number, finding 109
configuring parameters 62
conserving battery life 14
Console
using to install applications 94
Console, using to install
applications 94
contact information, Intermec ii
Dashboard
about the button 24
button, using 102
description 102
70 Series Mobile Computer User’s Manual
illustration 102
launching 24
default settings
bar code symbologies 128
communications 131
imager 130
listed 128–135
restoring Intermec Settings 69
scanner 130
desktop stand, described 7
DX1 desktop dock, described 7
DX2 dual dock, described 7
DX4 quad dock, described 7
EA30 area imager, reading
distances 120
electrial specifications 116
eMDI, description 43
emergency phone call, making with
computer 52
Enhanced Mobile Document
Imaging (eMDI) application,
description 43
environmental specifications 116
Ethernet
communications, configuring
71
snap-on adapter, described 7
EV12 linear imager, reading
distances 123
EX25 imager, reading distances 125
Features Demo, description 43
features of 70 Series 4
files, transferring to and from PC
32
fix interval, configuring with iGPS
60
flick, screen gesture described 38
Funk security
802.1x 82
configuring 802.1x 82
configuring static WEP 83
configuring WPA Enterprise
(802.1x) 80
configuring WPA Personal (PSK)
81
configuring WPA2 Enterprise
(802.1x) 80
175
Index
Funk security (continued)
configuring WPA2 Personal
(PSK) 81
profile, choosing 80
using open (no security)
associations 83
gestures, supported 37
Good Read LED
description 6
troubleshooting 107
GPS
configuring 58
GPSID, overview 58
improving performance 59
GPSID (GPS Intermediate Driver)
overview 58
gpsOneXTRA, description 59
handstrap replacement kit,
described 8
hard reset, performing 110
health, monitoring computer 102
Hibernate (battery swap),
description 23
holster, described 8
Home screen, understanding 36
horizontal scroll bar
description 36
illustration 36
IDL (Intermec Developer Library)
93
iGPS
application description 42
using to improve performance
59
Image Capture, description 44
Image Update
silently updating system
software 98
using to update system software
97
imager
default settings 130
reading distances 119–127
Intermec Browser, description 44
Intermec Connection Manager,
description 44
176
Intermec Dashboard, about 102
Intermec Developer Library (IDL)
93
Intermec Launcher, description 44
Intermec Resource Kits
described 93
downloading 93
Intermec Settings
application, description 42
command reference manual link
67
described 62
hiding menu items 69
main menu illustration 63
menu options 63–67
navigating in 68
restoring default settings 69
restoring menu items 69
starting 63
understanding structure 63
using remotely with
SmartSystems 70
using to configure Profile
Settings 68
Intermec, contact information ii
Internet Service Provider (ISP)
connection, creating 76
ISpyWiFi
application description 42
diagnosing Wi-Fi status 105
Key status LED, description 6
keypad
backlight behavior 15, 17
keystrokes for entering
characters 138
keypads
illustrated 15
troubleshooting keys 108
Knowledge Central web site 109
launching applications
automatically 95
LEDs
battery status, described 13
status descriptions 6
locked computer, troubleshooting
108
70 Series Mobile Computer User’s Manual
Index
magstripe reader adapter, described
magstripe reader snap-on adapter,
description 7
memory, computer 117
microSD card
about 27
installing in a CK70/CK71 30
installing in a CN70/CN70e 27
Microsoft security
choosing 84
configuring 802.1x 86
configuring static WEP 87
configuring WPA Enterprise
(802.1x) 84
configuring WPA Personal (PSK)
85
configuring WPA2 Enterprise
(802.1x) 84
configuring WPA2 Personal
(PSK) 85
using open (no security)
associations 87
models of 70 Series computers 2
MS Assisted mode, description 59
network connection,
troubleshooting 103
Notification LED, description 6
numeric function keypad,
illustrated 17
numeric keypad
entering characters on 21
illustrated 15
keypresses, listed 138–147
numeric with function keys keypad
keypresses, listed 154–162
open associations, configuring with
Funk 83
open associations, configuring with
Microsoft WZC 87
operating system
finding version 110
version 2
70 Series Mobile Computer User’s Manual
pan, screen gesture described 38
phone
CDMA, activating 50
features 48
making a call 52
making an emergency call 52
turning on and off 51
UMTS, activating 48
physical specifications 116
picture
saving to an SD card 55
storage location 54
taking with camera 54
pin-outs, back accessory interface
117
Power button, description of
behavior 22
power options
customizing 24
setting 22
power specifications 116
predefined imager mode, choosing
26
printer, connecting with Bluetooth
74
problems, troubleshooting 108
processor, computer 117
product support
calling 109
Knowledge Central web site 109
product support, calling 109
Profile Settings
application description 42
configuring with Intermec
Settings 68
profile, choosing Funk security 80
QWERTY keypad
entering characters on 20
illustrated 15
keypresses, listed 138–147
reading bar codes 26
reading distances
EA30 area imager 120
EV12 linear imager 123
EX25 imager 125
177
Index
Ready-to-Work LED, description 6
reboot
performing 110
power option description 24
recording a video 55
regulatory approvals 118
Reset button, location 111
reset, performing 110
RS-232 snap-on adapter, described
scan handle, described 8
scanner
Bluetooth, connecting to 72
default settings 130
supported tethered and cordless
26
tethered scanner, connecting 76
troubleshooting 108
ScanNGo radio configuration bar
codes 164
screen
aligning 41
backlight, configuring 24
brightness, configuring 25
gestures 37
no response, troubleshooting
108
specifications 118
Screen Off, power option
description 24
SD card, using to save pictures and
videos 55
security, wireless
802.1x with Funk 82
choosing Funk or WZC 79
serial communications, about 75
settings, default, listed 128–135
Shift status LED, description 6
Shutdown, power option
description 24
silently updating system software
98
SIM card, installing 48
SmartSystems Foundation
console, illustration 92
Console, using to install
applications 94
description 45
178
downloading 45, 93
monitoring computer health
102
ScanNGo description 93
updating system software 97
using the Console to install
applications 94
using to manage computer 92
using with remote Intermec
Settings 70
specifications, physical and
environmental 116
status icons, Title bar 38
status LEDs
CK70 5
CN70 5
descriptions 6
storage card, using to install
applications 95
storage, computer 117
Suspend, power option description
23
symbologies, supported 119
system software
updating with SmartSystems
Foundation 97
updating 97
terminal emulation,
troubleshooting 103
tethered scanner, connecting 76
tethered stylus replacement kit,
described 8
Tile bar
description 36
illustration 36
Title bar
description 36
illustration 36
status icon descriptions 38
transferring files, to and from PC
32
troubleshooting 103–108
802.11 network status 105
802.1x security 104
operation 108
reading bar codes 107
Wi-Fi connection 103
turning on or off phone 51, 52
70 Series Mobile Computer User’s Manual
Index
UMTS phone, activating 48
update packages, installing
individual 99
USB communictions, about 75
USB snap-on adapter, described 8
vehicle dock accessories, described
vehicle holder, described 8
video
recording 55
saving to an SD card 55
Virtual Private Network (VPN)
connection, creating 78
volume, adjusting 25
Wavelink Avalanche, downloading
the enabler 93
WEP
static, configuring with Funk 83
static, configuring with
Microsoft 87
WiFi communications
supported 4
Wi-Fi radio, enabling 71
Wi-Fi, troubleshooting 103
Windows Embedded Handheld,
user interface 36
Windows Mobile Device Center
downloading 99
wireless connectivity,
troubleshooting 103
Wireless Center application
description 42
Wireless Printing application
description 43
70 Series Mobile Computer User’s Manual
Wireless Scanning application
description 43
wireless security 79–89
802.1x with Funk 82
certificate, loading 88
choosing Funk or WZC 79
configuration bar codes 164
Wireless Zero Configuration
(WZC), selecting security
choice 84
WPA
Enterprise (802.1x) security,
configuring with Funk 80
Enterprise (802.1x) security,
configuring with
Microsoft 84
Personal (PSK) security,
configuring with Funk 81
Personal (PSK) security,
configuring with
Microsoft 85
WPA2
Enterprise (802.1x) security,
configuring with Funk 80
Enterprise (802.1x) security,
configuring with
Microsoft 84
Personal (PSK) security,
configuring with Funk 81
Personal (PSK) security,
configuring with
Microsoft 85
www.intermec.com
Knowledge Central 109
manuals, downloading ix, xi
Product Support 109
warranty information ix
179
Index
180
70 Series Mobile Computer User’s Manual
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2011 Intermec Technologies
Corporation. All rights reserved.
70 Series Mobile Computer User’s Manual
*935-038-001*
P/N 935-038-001

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2011:02:28 15:43:51-08:00
Modify Date                     : 2011:02:28 15:49:44-08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2011:02:28 15:49:44-08:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:b3932296-b10c-4057-938b-3d4f330d2547
Instance ID                     : uuid:f7ddb52f-7d92-4888-b19e-b95b2863213f
Page Count                      : 194
EXIF Metadata provided by EXIF.tools
FCC ID Filing: EHA-1000CP01CX2

Navigation menu