Intermec Technologies 1000CP01F 1000CP01F9, 1000CP02F9, 1001CP01F9 User Manual Compliance Insert
Intermec Technologies Corporation 1000CP01F9, 1000CP02F9, 1001CP01F9 Compliance Insert
Contents
- 1. User Manual
- 2. Compliance Insert
- 3. QSG
Compliance Insert
CN70 RFID, CN70e RFID Mobile Computer Compliance Insert
Models 1000CP01F9, 1000CP02F9
Caution: This marking indicates that the user should read all included
documentation before use. Retain this supplement for future reference.
Users of this product are cautioned to use accessories and peripherals approved by Intermec
Technologies Corporation. The use of accessories other than those recommended, or changes
to the product that is not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
Caution: For use with Intermec battery pack Model(s) 1000AB01 and
1000AB02 only. See battery instructions. For Power Supply use Intermec
Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge
only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using
1002UC01 or 1002UD01 adapters. Use of incorrect charger may present a
risk of fire or explosion.
Battery Recycling Information
This product contains or uses a lithium ion (Li-ion) main battery. When
the battery reaches the end of its useful life, the spent battery should be
disposed of by a qualified recycler or hazardous materials handler. Do
not mix this battery with the solid waste stream. Contact your Intermec
Technologies Service Center for recycling or disposal information.
802.11 Radio Precaution Statement
Caution: Users are responsible for configuring the channels of operation that
comply with their country regulatory standards. A Wireless Network
Administrator should review the operating restrictions detailed within the
Access Point installation manual.
Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-
Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications
Commission Office of Engineering and Technology (OET) Bulletin 65, Canada
RSS-102, and European Committee for Electrotechnical Standardization
(CENELEC) limits for exposure to radio frequency (RF) radiation.
If a body worn accessory is not purchased from Intermec, the accessory must contain
no metal and provide a 1.2 cm (0.5 in.) space between the device and the body.
To find RF exposure information, go to www.intermec.com > Products > Computers
(e.g.) > Handheld Computers (e.g.) > CN70 (e.g.) > Manuals tab and scroll down to
Regulatory Information.
Laser Compliance and Precaution
The 1000CP01F9 and 1000CP02F9 are registered with the CDRH as a Class 2
LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum
output of 1 mW at 630-670 nm.
Caution: There are no user serviceable parts inside the 1000CP01F9 and
1000CP02F9. Use of controls or adjustments, or performance of procedures
other than those specified herein, may result in hazardous laser light exposure
of up to 1 mW at 630-670 nm.
Note: There are no controls or adjustments provided for routine operation or
maintenance of the 1000CP01F9 and 1000CP02F9.
*Insert English LASER label here * Contact the product graphics department for label
content.
U.S.A. Digital Emissions Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1. Reorient or relocate the radio or television receiving antenna.
2. Increase the separation between the computer equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
radio or television receiver is connected.
4. Consult the dealer or an experienced radio television technician for help.
Canadian Compliance
This device complies with Industry Canada license-exempt RSS standards. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
802.11a Radio Precaution Statement
• 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 – 48)
is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite
System (MSS) operations.
• The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall comply with the e.i.r.p. limit.
• The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply
with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as
appropriate.
• Be advised that high-power radars are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
For Users in Canada (fr)(Translate to French)
Caution: This marking indicates that the user should read all included
documentation before use. Retain this supplement for future reference.
Users of this product are cautioned to use accessories and peripherals approved by Intermec
Technologies Corporation. The use of accessories other than those recommended, or changes
to the product that is not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user’s authority to operate the
equipment.
Caution: For use with Intermec battery pack Model(s) 1000AB01 and
1000AB02 only. See battery instructions. For Power Supply use Intermec
Model 9001AE02 or Model 9002AX02. No user-serviceable parts. Charge
only with bases 1002UU01, 1002UU03, 1002UU04 or 1002UU05 using
1002UC01 or 1002UD01 adapters. Use of incorrect charger may present a
risk of fire or explosion.
Battery Recycling Information
This product contains or uses a lithium ion (Li-ion) main battery. When
the battery reaches the end of its useful life, the spent battery should be
disposed of by a qualified recycler or hazardous materials handler. Do
not mix this battery with the solid waste stream. Contact your Intermec
Technologies Service Center for recycling or disposal information.
802.11 Radio Precaution Statement
Caution: Users are responsible for configuring the channels of operation that
comply with their country regulatory standards. A Wireless Network
Administrator should review the operating restrictions detailed within the
Access Point installation manual.
Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-
Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications
Commission Office of Engineering and Technology (OET) Bulletin 65, Canada
RSS-102, and European Committee for Electrotechnical Standardization
(CENELEC) limits for exposure to radio frequency (RF) radiation.
If a body worn accessory is not purchased from Intermec, the accessory must contain
no metal and provide a 1.2 cm (0.5 in.) space between the device and the body.
Tech Com will assign the appropriate path ):
To find RF exposure information, go to www.intermec.com > Products > Computers
(e.g.) > Handheld Computers (e.g.) > CN70 (e.g.) > Manuals tab and scroll down to
Regulatory Information.
Laser Compliance and Precaution
The 1000CP01F9 and 1000CP02F9 are registered with the CDRH as a Class 2
LASER Product (21 CFR Subchapter J, Part 1040). This product has a maximum
output of 1 mW at 630-670 nm.
Caution: There are no user serviceable parts inside the 1000CP01F9 and
1000CP02F9. Use of controls or adjustments, or performance of procedures
other than those specified herein, may result in hazardous laser light exposure
of up to 1 mW at 630-670 nm.
Note: There are no controls or adjustments provided for routine operation or
maintenance of the 1000CP01F9 and 1000CP02F9.
Digital Emissions Compliance
This device complies with Industry Canada license-exempt RSS standards. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
CAN ICES-3 (B)/NMB-3 (B)
802.11a Radio Precaution Statement
• 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 34 – 48)
is restricted to indoor operations to reduce harmful interference to co-channel Mobile Satellite
System (MSS) operations.
• The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-
5725 MHz shall comply with the e.i.r.p. limit.
• The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply
with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as
appropriate.
• Be advised that high-power radars are allocated as primary users (i.e. priority users) of the
bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.