Intermec Technologies 1555-900 Hand Held Reader User Manual Resend Operations Manual

Download:
Mirror Download [FCC.gov]
Document ID	125472
Application ID	Kqsv/4+JPe56eoYb5dNMfg==
Document Description	Resend Operations Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.77kB (909572 bits)
Date Submitted	2000-11-14 00:00:00
Date Available	2001-01-26 00:00:00
Creation Date	2000-08-22 10:43:27
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-08-22 10:43:27
Document Title	Resend Operations Manual

Operator’s Guide
P/N x-xxxx49-00
Sabre 1555 Laser Scanner
& RFID Reader/Programmer
Guía del Usuario
Guide de l'Opérateur
Bedieneranleitung
Guida dell'operatore
Guia do Utilizador
RFID reader/programmer operation
"beep"
Sabre 1555
2450 MHz
"beep"
Sabre 1555
915 MHz
RFID reader/programmer reading distance
Sabre 1555
2450 MHz
1 cm - 60 cm
(0.4" - 24")
Sabre 1555
915 MHz
2.5 cm - 200 cm
(1" - 80")
Scanner operation
"beep"
Scanner reading distance
Sabre 1555
Standard Range
6 cm - 34 cm
(2.5" - 13.5")
Sabre 1555
Long Range
28 cm - 100 cm
(11" - 39")
Laser warnings
The Sabre 1555 has a maximum laser output of 1mW at 630-680 nm and complies with the following safety
standards:
USA: CDRH - Class II Laser Product (CFR 21 Subpart J)
IEC 825-1 EN 60825-1 - Class 2 Laser Product
Fix these warning labels onto the product if they are not already present.
Collez les étiquettes d’avertissement sur votre produit.
Cole as etiquetas de precaução no equipamento.
Bringen Sie Warnetiketten auf dem Produkt an.
Un’etichetta di avviso per il laser è da applicare sul prodotto.
Fije la etiqueta de advertencia en el producto.
CAUTION – Use of controls or adjustments or performance of procedures other than those specified herein result in
hazardous laser light.
VORSICHT – Bei einer anders als hier beschriebenen Verwendung der Bedienelemente oder Veränderungen oder
einer anderen Ausführung der Arbeitsabläufe entsteht gefährliches Laserlicht.
ATTENTION – L’utilisation de contrôles/commandes ou de réglages ou l’exécution de procédures autres que ceux
précisés par le présent document provoquent une lumière laser dangereuse.
Regulatory statements
USA & Canada: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This
device requires a radio license, unless it it used totally inside a building. (The user must obtain this license.)
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil exige une
license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir cette license.)
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant
to part 15 of the FCC Rules and it must not be used in a residential environment; however, it has also been tested and found to comply with the more
stringent requirements for a class B device, pursuant to Part 15 of the FCC rules. It generates, uses, and can radiate radio frequency energy. If
not installed and used in accordance with the instructions, it may cause interference to radio communications. If this equipment causes interference,
the user will be required to correct the interference at the user’s own expense.
To maintain compliance with the FCC Rules, the I/O cables that interconnect between the device and any peripheral (such as a reader) must be
as specified by Intermec.
This product complies with the American National Standards Institute NCIT 256-1999 standard for RFID Item Management.
Operator Warning: FCC regulations limit exposure to radio frequency (RF) radiation. To comply with these regulations, the operator of this
device must maintain a distance of at least 4 cm (2 inches) from the front part of the device to any bystanders under normal operating conditions.
While the device is on, the operator’s body and parts of the body, such as eyes, hands, or head, must be 4 cm (2 inches) or farther
from the front of the device.
This device is UL listed (UL 1950/C22.2 No. 950) for safety when powered by a host system or by one of the following external Intermec power
supplies: Catalog No. and P/N 043230 ~100V, 50/60 Hz or Catalog No. and P/N 047793 ~120V, 60 Hz. This device is CSA certified.
Intermec hereby declares that the Sabre 1555 has been tested and found compliant with the below listed standards as required by
the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage Directive 73/23/EEC as amended by 93/68/EEC:
EN55022, EN50082-2, EN60950
This device is TÜV GS licensed (EN 60950 and EN 60825-1) for safety when powered by a host system or by the following external Intermec power
supply: Catalog No. and P/N 047795 ~230V, 50 Hz. For 240V applications use the power supply: Catalog No. 047794 (P/N 5014UK) ~240V, 50
Hz. The device is CSA certified.
Australia-New Zealand: This equipment has been tested and found to conform to the Australian EMC framework
concerning Class
standard AS/NZS 3548.
digital
devices,
prescribed
by
the
Australian
and
New-Zealand
N309
Mexico: Este equipo cumple con la certificatión NOM.
The information contained in this document is for informational purposes only and is subject to change without notice. No part of this document
may be copied or reproduced in any manner without the prior written permission of Intermec Technologies Corporation.
Sabre products are covered by patents issued or pending in the USA and other countries.
The word Intermec, the Intermec logo, Sabre and EasySet are either trademarks or registered trademarks of Intermec.
Throughout this document, trademarked names may be used. Rather than put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention
of infringement.
Caution
Changes or modifications not expressly approved by Intermec could void the user's authority to operate this equipment.
North America / Asia Pacific / Latin America • 6001 36th Avenue West, PO Box 4280, Everett, WA 98203-9280
Tel: +1 425 348 2600 • Fax: +1 425 348 2833 • U.S. service and technical support, tel: 1.800.755.5505 • Canadian
service and technical support, tel: 1.800.688.7043
Europe / Middle East / Africa • Sovereign House, Vastern Road, Reading RG1 8BT, England
Tel: +44 118 987 9420 • Fax: +44 118 987 9416
Internet: http://www.intermec.com
E-mail: info@intermec.com
Support: http://datacapture.intermec.com
© 09/2000 Intermec Technologies Corporation.
All rights reserved.
Edition
1.0
6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:08:22 10:43:27
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:08:22 10:43:27-06:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools