Intermec Technologies 1802-900 Wireless Scanner User Manual User Information

User Information

Manual Supplement

For Users in the United States and Canada

Place this supplement in your manual.

This device complies with Part 15 of the FCC Rules and with RSS-210 of

Industry Canada. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that can cause

undesired operation.

Federal Communications Commission Compliance

This equipment is intended for operation in a commercial environment, in

compliance with the requirements for a Class A digital device, pursuant to

Part 15 of the FCC Rules, and it must not be used in a residential

environment; however, it has also been tested and found to comply with

the more stringent requirements for a Class B device, pursuant to Part 15

of the FCC Rules. It generates, uses, and can radiate radio frequency

energy. If not installed and used in accordance with the instruction

manual, it may cause interference to radio communications. If this

equipment causes interference, the user will be required to correct the

interference at the user’s own expense.

Note: In order to maintain compliance with FCC Rules, the input/output

(I/O) cables that interconnect between the device and any peripheral must

be as specified by Intermec.

Industry Canada Compliance

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

This device requires a radio license, unless it is used totally inside a

building. (The user must obtain this license.)

Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouilleur du Canada.

Cet appareil exige une license radio à moins d’être entièrement installé

dans un bâtiment. (L’utilisateur doit obtenir cette license.)

Caution

Changes or modifications not expressly approved by Intermec could void the

user’s authority to operate this equipment.