Intermec Technologies ABTM3 User Manual Info

Download:
Mirror Download [FCC.gov]
Document ID	165078
Application ID	MJ/P4s4HCzURzSCgzOpHug==
Document Description	Manual insert with compliance statements
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.4kB (17518 bits)
Date Submitted	2001-08-17 00:00:00
Date Available	2001-10-23 00:00:00
Creation Date	2001-08-15 17:22:17
Producing Software	Acrobat PDFWriter 4.0 for Windows
Document Lastmod	2001-08-16 08:26:38
Document Title	Info.PDF
Document Creator	Microsoft Word
Document Author:	Intermec User

Compliance Statement Insert
Device Name: Pen Tablet Computer
Model Number: Model 700 (710 & 720 Configurations)
The responsible party for the compliance of this device is:
Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203 USA
(425) 348-2600
CAUTION: See users guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can result in
personal injury, fire, or battery explosion.
This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by
Intermec Technologies Corporation. The use of accessories other than those recommended or changes to this product that are not approved
by Intermec Technologies Corporation may void the compliance of this product and may result in the loss of the users authority to operate the
equipment.
This device complies with part 15 of the FCC and Industry Canada Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the radio or television receiving antenna.
Increase the separation between the computer equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Radio Frequency Exposure Compliance for ABTM3 radio, FCC ID: EHAABTM3 CANADA: XXXXXXXX
This equipment has been tested and found to comply with the limits for products using radio transmitters used by the general public.
578-100-056 Revision A
*578-100-056*
578-100-056
Page 1 of 2
DECLARATION OF CONFORMITY
(According to ISO/IEC Guide 22 and EN 45014)
PAGE ONE OF ONE
THE PRODUCT HEREWITH COMPLIES WITH THE REQUIREMENTS OF :
THE LOW-VOLTAGE DIRECTIVE 72/32/EEC.
THE EMC DIRECTIVE 89/336/EEC.
Manufacturer’s Name:
Intermec Technologies Corporation
6001 36th Avenue West
Everett, WA 98203
European Representative:
Intermec International Incorporated
Sovereign House, Vastern Road
Reading, Berkshire
RG1 8BT England
Declares that the product listed below:
Product Type: ITE/Residential, Commercial, and Light Industrial
Product Name: Model 700
Model Number: Model 700
Options: All
Beginning Serial Number: All
Date Issued: February 26, 2001
Conforms to the following product specifications:
Safety: IEC 950 / EN 60950
EMC: EN 55022 : 1994 + A1 : 1995 + A2 : 1997 / CISPR Publication 22 : 1993, Class B Limits and Methods
EN 50024 : 1998 (CISPR 24) Information Technology Equipment – Immunity Characteristics –
Limits and Methods of Measurement
EN 61000-4-2 : 1995 – Electrostatic Discharge
EN 61000-4-3 : 1995 – Radiated RF Field
EN 61000-4-4 : 1995 – Electrical Fast Transients
EN 61000-4-5 : 1995 – Voltage Surge
EN 61000-4-6 : 1996 – Conducted RF Field
EN 61000-4-11 : 1994 – Voltage Dips, Short Interruptions, and Variations
EN61000-3-2 : 1995 + A1 : 1998 + A2 : 1998 + A14 : 2000 – Harmonic Current Emissions
EN61000-3-3 : 1994 – Voltage Fluctuation and Flicker
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and
Standard(s).
Company Official: Arvin Danielson
Signature:
Signed Copy on File
Position: Vice President
Date: February 26, 2001
European Contact: Scott Mercer, Intermec International Incorporated, Sovereign House, Vastern Road, Reading, Berkshire,
RG1 8BT England; Phone INT+44 118 987 9400; Fax INT+44 118 987 9401
578-100-056 Revision A
*578-100-056*
578-100-056
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : Microsoft Word
Create Date                     : 2001:08:15 17:22:17
Title                           : Info.PDF
Author                          : Intermec User
Producer                        : Acrobat PDFWriter 4.0 for Windows
Modify Date                     : 2001:08:16 08:26:38-07:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools