Intermec Technologies DRCB DRCB User Manual 578 100 138B CN2B
Intermec Technologies Corporation DRCB 578 100 138B CN2B
Contents
Compliance Insert
Compliance Statement Insert CN2B Device Name: Data Collection Computer Model Number: The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the radio or television receiving antenna. Increase the separation between the computer equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. Consult the dealer or an experienced radio television technician for help. 15.19(a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canadian Digital Apparatus Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Radio Wave Exposure and Specific Absorption Rate (SAR) Information for Model CN2B The Model CN2B Mobile Computer has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate or SAR. Tests for SAR are conducted using standardized methods with the device transmitting at its highest certified power level. While there may be difference between the SAR levels of various products, they are all designed to meet the relevant guidelines for exposure to the radio waves. This radio has been tested and meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines. The highest SAR value for the CN2B Mobile Computer, as tested by Compliance Certification Services, for single or collocated configuration is 0.442 W/kg. Compliance Battery Recycling Information This product contains a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. NiMH This product contains a Nickel Metal Hydride (NiMH) backup battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. NiMH Note: In the U.S., the EPA does not consider spent Li-ion or NiMH batteries as hazardous waste. Caution: The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100°C (212°F) or incinerate. Dispose of used battery pack promptly. Keep away from children. Use Intermec battery pack Model number 074201 only. Use of another pack may present a risk of fire or explosion. Vorsicht: Der in diesem Gerät verwendete Akkusatz kann bei Missbrauch eine Brand- oder Verätzungsgefahr darstellen. Nicht zerlegen, über 100 °C erwärmen oder verbrennen. Den gebrauchten Akkusatz sofort entsorgen. Von Kindern fern halten. Nur Intermec-Akkusatz, Modellnummer 074201 verwenden. Bei Verwendung eines anderen Akkusatzes besteht Brand- oder Explosionsgefahr. 578-100-138 Revision B *578-100-138B* *578-100-138B* Page 1 of 2 DECLARATION OF CONFORMITY (According to ISO/IEC Guide 22 and EN 45014) PAGE ONE OF ONE THE PRODUCT HEREWITH COMPLIES WITH THE REQUIREMENTS OF : THE LOW-VOLTAGE DIRECTIVE 73/23/EEC. THE EMC DIRECTIVE 89/336/EEC. THE R&TTE DIRECTIVE 1999/05/EC. Manufacturer’s Name: Intermec Technologies Corporation 6001 36th Avenue West Everett, WA 98203 European Representative: Intermec International Incorporated Sovereign House, Vastern Road Reading, Berkshire RG1 8BT England Declares that the product listed below: Product Type: ITE/Residential, Commercial, and Light Industrial Product Name: CN2B Model Number: CN2B Options: All Beginning Serial Number: All Date Issued: December 23, 2005 Conforms to the following product specifications: Safety: IEC 60950-1 / EN 60950-1 IEC 60825-1 / EN 60825-1 Class 1 LED Product EMC: EN 55022 : 1998 / CISPR Publication 22 : 1997, Class B Limits and Methods EN 55024 : 1998 (CISPR 24) Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement EN61000-3-2 : 1995 + A1 : 1998 + A2 : 1998 + A14 : 2000 – Harmonic Current Emissions EN61000-3-3 : 1994 – Voltage Fluctuation and Flicker ETSI EN 301 489-17 Radio: ETSI EN 300 328-2 I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s). Company Official: Michael Abel Signature: Signed Copy on File Position: Vice President Date: _23-DEC-2005_______ European Contact: Intermec International Incorporated, Sovereign House, Vastern Road, Reading, Berkshire, RG1 8BT England; Phone INT+44 118 987 9400; Fax INT+44 118 987 9401 578-100-138 Revision B *578-100-138B* *578-100-138B* Page 2 of 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:5a1ff4a3-12f9-4cb6-9b5d-5b8b28d53ce5 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2006:01:25 16:20:27-08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2006:01:26 08:08:42-06:00 Metadata Date : 2006:01:26 08:08:42-06:00 Document ID : uuid:d4551645-8b4d-481d-a0a1-aebaeaa1b9db Instance ID : uuid:acea05e0-bf17-4d01-ad7a-19ca4d4a0608 Format : application/pdf Creator : kmolina Title : Microsoft Word - 578-100-138B_CN2B.doc Author : kmolinaEXIF Metadata provided by EXIF.tools