Intermec Technologies F4-915-LP RFID Bar Code Printer User Manual

Intermec Technologies Corporation RFID Bar Code Printer Part 1

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

Contents

User Manual Part 2

Intermec EasyCoder F4 – Installation & Operation Ed. 2   37 Chapter 5    Paper LoadPeel-Off, cont'd.Thread the backing paper around the tear-off edge and back under the print mechanism and guide shaft.Insert the end of the backing paper under the lip of the rewinder, then rotate the rewinder counter-clockwise a few turns. 78This diagram shows the path of the label web.9 10Turn the printhead lift knob counter-clockwise to lower the printhead
Intermec EasyCoder F4 – Installation & Operation Ed. 238 Chapter 5    Paper LoadPeel-Off, cont'd.Adjust the position of the green paper guide so the paper is guided with a minimum of play.11 12Close the side door.13Adjust the paper feed by pressing the Feed key.
Download:
Mirror Download [FCC.gov]
Document ID100728
Application IDL0AaVhOqbSIa8MynWalMyg==
Document DescriptionUser Manual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize103.61kB (1295176 bits)
Date Submitted2000-05-17 00:00:00
Date Available2000-06-19 00:00:00
Creation Date2000-05-02 15:45:13
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2000-05-02 15:45:52
Document TitleUser Manual Part 2
FCC ID Filing: HN2-F4-915-LP

Navigation menu