Intermec Technologies F4-915-LP RFID Bar Code Printer User Manual

Intermec Technologies Corporation RFID Bar Code Printer Part 1

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

Contents

User Manual Part 3

Intermec EasyCoder F4 – Installation & Operation Ed. 278 Chapter 11    MaintenancePrinthead Cleaning, cont'd.Wait for approx. 30 seconds to allow the cleaning fl uid to dissolve the residue. Insert most of the cleaning card under the printhead (1). Close the printhead (2).9Allow the cleaned parts to dry before loading any paper.Pull out the cleaning card. If necessary, repeat the process with a new cleaning card.8710
Intermec EasyCoder F4 – Installation & Operation Ed. 2   79 Chapter 11    Maintenance1External CleaningAlways remove the power cordbefore cleaning! Wipe external surfaces with a soft cloth slightly moistened with water or a mild detergent.3Never use any sharp tools for removing stuck labels. The printhead and rollers are delicate.Never spray the printer. Protect it from water when cleaning the premises.24
Download:
Mirror Download [FCC.gov]
Document ID100729
Application IDL0AaVhOqbSIa8MynWalMyg==
Document DescriptionUser Manual Part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize109.43kB (1367839 bits)
Date Submitted2000-05-17 00:00:00
Date Available2000-06-19 00:00:00
Creation Date2000-05-02 15:43:03
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2000-05-02 15:44:10
Document TitleUser Manual Part 3
FCC ID Filing: HN2-F4-915-LP

Navigation menu