Intermec Technologies IM10 IM10, IM10G User Manual 296D6BDB tmp

Download:
Mirror Download [FCC.gov]
Document ID	1398252
Application ID	42Z+WX6EAuTM2hUCwTHLug==
Document Description	Compliance Insert
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.83kB (135421 bits)
Date Submitted	2010-12-29 00:00:00
Date Available	2010-12-29 00:00:00
Creation Date	2010-12-29 16:56:41
Producing Software	AFPL Ghostscript 8.53
Document Lastmod	2010-12-29 16:56:41
Document Title	Microsoft Word - 296D6BDB.tmp
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	frydave

IF2 Network Reader and IM10 radio, 900 MHz Compliance Insert
Model 1009FF01
Retain This Supplement / General Warning
Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for
future reference.
Caution: Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies
Corporation. The use of accessories other than those recommended, or changes to the product that is not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s
authority to operate the equipment..
Power Supply Information
Caution: For Power Supply use Intermec Model AE15 (P/N 851-061-408). Alternatively this product may be powered by a
Power-Over-Ethernet network compliant with IEEE 802.3at. If using POE users are cautioned to select a POE power
source which complies with all of the safety and EMC regulations in the country of use. No user-serviceable parts.
For Users Within North and South America
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can
cause undesired operation.
Caution: FCC Compliance
Intermec RFID systems require professional installation.
Antennas: The users of this product are cautioned to use antennas and accessories approved by Intermec Technologies Corporation. The use of
antennas and accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies
Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE
C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102,
and CENELEC limits for exposure to radio frequency (RF) radiation.
Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures
beyond the limits established for this equipment.
When installing and using this product, a 25.4 cm (10 in.) passing distance must be maintained from the body or head of
the user or nearby persons and the antenna. The antenna must not be touched during transmitter operation.
This product is intended for business and industrial environments and should not be used by children.
Conservez ce supplément / Mise en garde générale
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse. Conservez ce
supplement pour référence future.
Attention: Utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec
Technologies Corporation. L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui
ne sont pas approuvés par Intermec Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au
droit qu’a l’usager d’utiliser l’équipement.
Information sur l'Alimentation
Attention: Pour l’alimentation, utiliser le modèle Intermec AE15 (P/N 851-061-408). Alternativement, ce produit peut être
alimenté par un réseau Power-Over-Ethernet conforme à la norme IEEE 802.3. Si vous utilisez POE les utilisateurs sont
informés de choisir une source d'alimentation POE, qui est conforme à toutes les réglementations de sécurité et EMC dans
le pays d'utilisation. Il ne contient aucune pièce réparable par l’utilisateur.
À l’attention des utilisateurs en Amérique du Nord et du Sud
Ce dispositif est conforme à la partie 15 des règlements du FCC et à la norme RSS-210 d’Industrie Canada. L’utilisation est assujettie aux deux
conditions suivantes : (1) Ce dispositif ne doit pas causer d’interférence dommageable et (2) Ce dispositif doit tolérer toute interférence, incluant
l’interférence pouvant causer un fonctionnement indésirable.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
Énoncé sur l'exposition aux radiations
Avertissement : Ce matériel est conforme à la Commission internationale de protection contre les rayonnements non
ionisants (ICNIRP), IEEE C95.1, Federal Communications Commission Bureau d'ingénierie et de technologie (OET)
Bulletin 65, Canada RSS-102 et CENELEC les limites d'exposition aux rayonnements de radiofréquences (RF).
Utilisation des antennes et des accessoires non autorisés peut-être invalider la conformité de ce produit et peut entraîner
l'exposition RF au-delà des limites établies pour ce matériel.
Lorsque l'installation et l'utilisation de ce produit, un 25,4 cm (10 po) en passant à distance doit être maintenue dans le
corps ou la tête de l'utilisateur ou à proximité de personnes et de l'antenne. L'antenne ne doit pas être touchée lors
d'opération de l'émetteur.
Ce produit est destiné aux entreprises et des environnements industriels et ne doit pas être utilisé par des enfants.
Approved Antenna List
This device has been designed to operate with the antennas listed in the next table. Each of these antennas has a maximum effective gain
(antenna gain minus cable loss) of 6 dB. Antennas not included in this list or having an effective gain (antenna gain minus cable loss) of greater
than 6 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that permitted for successful communication.
Gain figures are linear dBi (decibels over isotropic). Antenna polarization is described as LP (linear polarized), CP (circular polarized), LCP
(left circular polarized), or RCP (right circular polarized).
Liste d'antennes approuvées
Cet appareil a été conçu pour fonctionner avec les antennes listées au tableau suivant. Ces antennes ont un gain apparent maximal de 6 dB (gain
de l'antenne moins la perte du câble). Il est strictement prohibé d'utiliser avec cet appareil les antennes qui ne sont pas sur cette liste ou celles
ayant un gain apparent de plus de 6 dB (gain de l'antenne moins la perte du câble). L'impédance requise pour l'antenne est de 50 ohms.
Afin de réduire le risque de perturbation radioélectrique pour les autres utilisateurs, le type et le gain de l'antenne doivent être choisis de maniére
ce que la puissance isotrope rayonnée Équivalente (p.i.r.e.) ne dépasse pas ce qui est nécessaire pour établir la communication.
Les valeurs de gains sont dBi linéaires (décibels isotropes). La polarisation de l'antenne est décrite comme Étant PL (polarization linéaire), PC
(polarisation circulaire), PCG (polarisation circulaire gauche) ou PCD (polarisation circulaire droite).
Approved Antenna List - Liste d'antennes approuvées
Intermec P/N
N/P Intermec
Intermec M/N, Supplier P/N Intermec
N/M, Fournisseur N/P
Description Description
Gain (dBi)*
Gain (dBi)*
805-609-001
IA33A, Cushcraft SP9028PC156RSM
Patch CP - Plaque PC
4.0
805-622-002
IA39A, Kathrein 25-178
Patch CP - Plaque PC
6.5
2.4
805-623-002
IA39D, Kathrein 25-278
Patch CP - Plaque PC
5.0
2.4
805-626-001
IA36B, Kathrein 25-578
Patch LP - Plaque PL
6.0
2.4
805-629-001
IA33C, Mobile Mark PN10-915RCPI
Patch CP - Plaque PC
7.0
2.4
805-654-001
IA33G, Huber Suhner 84024995
Panel RCP - Panneau PCD
5.5
2.4
805-654-002
IA34A, Huber Suhner 84024996
Panel LCP - Panneau PCG
5.5
2.4
805-655-001
IA33H, Huber Suhner 84024999
Panel RCP - Panneau PCD
7.0
2.4
805-655-002
IA34B, Huber Suhner 84025000
Panel LCP - Panneau PCG
7.0
2.4
805-816-002
IA33E, Cushcraft S9026XR1RRN
Patch CP - Plaque PC
3.0
2.4
- , Huber Suhner 1309-57-0087-X
Panel RCP - Panneau PC
7.0
2.4
- , Huber Suhner 1309-56-0001-X
Panel RCP - Panneau PC
8.0
3.4
- , Mobile Mark PN7-915I-FL
Panel RCP - Panneau PC
4.0
2.4
- , Mobile Mark EDN 191-1550
Panel RCP - Panneau PC
4.0
2.4
- , Kathrein 520 10087
Panel RCP - Panneau PC
7.5
2.4
- , Kathrein 520 10073
Panel RCP - Panneau PC
5.2
2.4
- , Kathrein 520 10092
Patch CP - Plaque PC
-30.0
2.4
- , Huber Suhner 1307.17.0089-X
Panel RCP - Panneau PC
4.5
2.4
- , Huber Suhner 1309.17.0085-X
Patch LP - Plaque PL
8.0
2.4
- , NeWave Wave-N7
7ft. Multi-Axis Dipole
5.5
2.4
- , NeWave Wave-N5
5ft. Multi-Axis Dipole
4.5
2.4
- , NeWave Wave-N3
3ft. Multi-Axis Dipole
3.0
2.4
- , Mobile Mark BP6-915RCPI
Panel RCP - Panneau PCD
2.5
2.4
- , Laird S9025P
Panel RCP - Panneau PC
2.5
2.4
* Gain, dBi + 3 = dBiC, Circular Polarized antenna gain - gain Polarisée Circulaire d’antenne
-X = quantity price code - code des prix de quantité
Cable Loss (dB)
Perte du Câble (dB)
For Users Outside of North and South America (Languages needed: English, Simplified
Chinese, Korean, and Hebrew)
RF Radiation Exposure Statement
Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE
C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102,
and CENELEC limits for exposure to radio frequency (RF) radiation.
Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures
beyond the limits established for this equipment.
When installing and using this product, a 25.4 cm (10 in.) passing distance must be maintained from the body or head of the
user or nearby persons and the antenna. The antenna must not be touched during transmitter operation.
This product is intended for business and industrial environments and should not be used by children.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Producer                        : AFPL Ghostscript 8.53
Create Date                     : 2010:12:29 16:56:41
Modify Date                     : 2010:12:29 16:56:41
Title                           : Microsoft Word - 296D6BDB.tmp
Creator                         : PrimoPDF http://www.primopdf.com
Author                          : frydave

EXIF Metadata provided by EXIF.tools