Intermec Technologies PB42 PB42 Printer User Manual 074580
Intermec Technologies Corporation PB42 Printer 074580
Contents
- 1. User Manual Supplement 1 of 2
- 2. User Manual Supplement 2 of 2
- 3. Users Manual
User Manual Supplement 2 of 2
Important PB42 Information!
For Users in the United States and Canada
Place this supplement in your manual.
Federal Communications Commission Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that can cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. It generates, uses, and can radiate radio
frequency energy. If not installed and used in accordance with the instruction manual, it may cause
interference to radio communications. If this equipment causes interference, the user will be required
to correct the interference at the user’s own expense.
Note: In order to maintain compliance with FCC Rules, the input/output (I/O) cables
that interconnect between the device and any peripheral must be as specified by Intermec.
Changes or modifications not expressly approved by Intermec could void the user’s
authority to operate this equipment.
Industry Canada Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel
brouilleur du Canada.
Safety Agency Approvals
This device is UL and cUL Listed (UL 60950/C22.2#60950) and UL GS Licensed (EN 60950) for
safety.
Battery Recycling Information
This product uses lithium ion (Li-ion) main batteries. When the batteries reach the end
of their useful life, the spent batteries should be disposed of by a qualified recycler or
hazardous materials handler. Do not mix these batteries with the solid waste stream.
Contact your Intermec Technologies Service Center for recycling or disposal
information.
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
Important PB42 Information!
*074580-001*
P/N 074580-001
Note: In the U.S.A., the EPA does not consider spent Li-ion batteries as hazardous waste.