Intermec Technologies PB42 PB42 Printer User Manual pb42 qsg color cover ai

Download:
Mirror Download [FCC.gov]
Document ID	515838
Application ID	94rlPTAH+FzdmgPCgXMXDw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.24kB (228027 bits)
Date Submitted	2005-02-16 00:00:00
Date Available	2005-02-16 00:00:00
Creation Date	2004-10-28 10:48:54
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-01-13 14:10:11
Document Title	pb42 qsg color cover.ai
Document Creator	PScript5.dll Version 5.2
Document Author:	NWojack

Quick Start Guide
PB42 Printer
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided
solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without
written permission of Intermec.
Information and specifications contained in this document are
subject to change without prior notice and do not represent a
commitment on the part of Intermec Technologies Corporation.
© 2004 by Intermec Technologies Corporation. All rights
reserved.
The word Intermec, the Intermec logo, Norand, ArciTech,
CrossBar, Data Collection Browser, dcBrowser, Duratherm,
EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder,
Fingerprint, i-gistics, INCA (under license), InterDriver,
Intermec Printer Network Manager, IRL, JANUS, LabelShop,
Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,
Precision Print, PrintSet, RoutePower, TE 2000, Trakker
Antares, UAP, Universal Access Point, and Virtual Wedge are
either trademarks or registered trademarks of Intermec
Technologies Corporation.
Throughout this manual, trademarked names may be used.
Rather than put a trademark (™ or ®) symbol in every
occurrence of a trademarked name, we state that we are using
the names only in an editorial fashion, and to the benefit of the
trademark owner, with no intention of infringement.
There are U.S. and foreign patents pending.
What is the PB42 Printer?
The PB42 printer is a rugged receipt printer designed for use
with the CK60 computer. The PB42 provides:
• Print resolution of 203 dpi
• Print speeds up to 8.5 cm (3.3 inches) per second
• Serial or Bluetooth™ communication options
Installing and Charging the Batteries
The PB42 ships with two batteries. You need to fully charge the
batteries before you can use the printer. You can charge the
batteries inside the PB42 printer or in the CK60 battery charger.
To charge the batteries in the PB42 printer, you need an AC
power adapter (P/N 851-076-001) and a power cord.
Use Intermec battery pack P/N 318-015-001 only.
Use of another pack may present a risk of fire or
explosion.
Employez le bloc-batterie d’Intermec P/N 318015-001 seulement. L’utilisation de tout autre
bloc-batterie présente un risque d’incendie ou
d’explosion.
The battery pack used in this device may present a
fire or chemical burn hazard if mistreated. Do not
recharge, disassemble, heat above 100 C (212 F) or
incinerate.
Le bloc-batterie utilisé dans cet appareil peut
présenter un risque d’incendie ou de brûlure
chimique en cas de mauvais traitement. Ne
rechargez pas, ne désassemblez pas, ne chauffez pas
à une température supérieure à 100 C (212 F) et
n’incinérez pas ce bloc-batterie.
Dispose of used battery pack promptly. Keep away from
children.
It takes about 4 hours to charge the batteries inside the PB42.
PB42 Printer Quick Start Guide
To install the batteries
1 Pull the battery cover latch towards the front of the printer
and lift up on the battery cover.
Battery cover
latch
Battery cover
2 Insert batteries into the two battery slots until they lock in
place. The contact side of the battery faces the media cover.
Battery cover
Media cover
Batteries
PB42 Printer Quick Start Guide
3 Close the battery cover.
4 Connect the AC power adapter to the DC power connector
on the printer.
5 Connect one end of the power cord to the AC power adapter
and then plug other end into an AC outlet.
Loading Media
DC power
connector
You can use roll or fanfold receipt media with the PB42 printer.
The PB42 ships with a sample roll of media that you can use the
first time you unpack the shipping box and verify that the
printer is working correctly.
The media you use in the PB42 must meet these specifications.
Specification
Dimensions
Receipt roll core (ID)
1.9 cm (.75 inch)
Receipt roll maximum diameter
6.7 cm (2.65 inches)
Media maximum width
11.2 cm (4.40 inches)
To load media
1 Slide the media cover release button to the unlocked (left)
position.
2 Press the media cover release button to open the media cover.
PB42 Printer Quick Start Guide
Media cover
Media cover
release
3 Insert the media between the two media supports. Make sure
you load the media clockwise so that it pulls off the core from
the bottom of the printer.
Media
supports
4 Pull out a few inches of the media.
PB42 Printer Quick Start Guide
5 Close the media cover until it latches.
6 Slide the media cover release button to the locked (right)
position.
Understanding the Control Panel
The PB42 control panel contains two buttons and three lights.
Radio button
Battery lights
Ready-to-Work
Feed button indicator
Button or LED
Function
Radio button
Turns the radio on and off.
Blinks fast green when the radio is receiving
data.
Blinks slow green when the radio is on.
Battery lights
Indicates whether the battery is charging
(red), low (red blinking), or fully charged
(green).
Ready-to-Work™
indicator
Indicates a connection to the host if on
solid blue. If the blue light blinks, the
printer is open or there is a hardware error.
Feed button
Press to advance media. Press and hold to
advance media at 2 inches per second (ips).
PB42 Printer Quick Start Guide
Performing a Test Print
After you have loaded the media in the printer, you are ready to
print the configuration test information. Use this information
for reference when installing your PB42 printer and for verifying
proper printer operation.
To perform a test print
• Press and hold the Feed and Radio buttons for 5 seconds.
Loading New Firmware
You can upload firmware on your PB42 from the CK60
handheld computer. To upgrade your firmware, you need to
send a .upg file to the PB42 printer:
• PB42xxxxx.upg
Where xxxxx is the version number of the firmware.
To load new firmware
1 On the CK60, go to My Device > Program Files > Intermec
and start FWUpgrade.
2 Select the Settings tab.
3 Select COM6 for the COM port and select the “Use Remote
DCB” check box.
4 Select the Printer Flash Update tab.
5 Click Choose Update. A browser window opens.
6 Browse to your .upg file, select it, and click OK. The browser
windor closes and you return to the Printer Flash Update
tab.
7 Select Send Update.
8 Wait for the Upgrade Done message on the CK60. The
PB42 beeps twice when it is done receiving information.
PB42 Printer Quick Start Guide
Specifications
Physical Dimensions
Depth:
7.87 cm (3.1 inches)
Height:
18.03 cm (7.1 inches)
Width:
16.82 cm (6.62 inches)
Weight:
less than 1.23 kg (2.7 lb) with battery packs and
receipt paper.
Power Specifications
AC power adapter:
50 Watt
Voltage range:
12V ± 5%
Operating:
Rechargeable 7.2V 2.4 Ah lithium-ion
batteries
Temperature and Humidity Specifications
Operating temperature:
-20°C (-4°F) to 50°C (122°F)
Non-operating temperature:
-30°C (-22°F) to 70°C (158°F)
Relative humidity:
10% to 90% non-condensing
Bar Code Symbologies
Interleaved 2 of 5, Codabar, EAN-128, PDF417, UPC-A,
Code 128, EAN-13, EAN-8, Code 39, New GTIN
PB42 Printer Quick Start Guide
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
© 2004 Intermec Technologies Corp.
All Rights Reserved
PB42 Printer Quick Start Guide
*074572-001*
074572-001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 10
Page Layout                     : SinglePage
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2cb9fc7a-3452-4c7c-82d9-1398ad2b5f93
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2004:10:28 10:48:54-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2005:01:13 14:10:11-08:00
Metadata Date                   : 2005:01:13 14:10:11-08:00
Document ID                     : uuid:8c2a7723-6d76-4168-abac-343fd6a62d1f
Format                          : application/pdf
Title                           : pb42 qsg color cover.ai
Creator                         : NWojack
Author                          : NWojack

EXIF Metadata provided by EXIF.tools