Intermec Technologies RM182-24 2.4 GHz FHSS Limited Module Approval User Manual RM182 Manual Supplement

Intermec Technologies Corporation 2.4 GHz FHSS Limited Module Approval RM182 Manual Supplement

Contents

Revised User Manual

P/N XXXXXX-001Important RM182  Information!ContentsFor Users in the United States and Canada....................................................................................2For Users Outside of the United States or Canada........................................................................4Français.............................................................................................................................................5Deutsch...............................................................................................................................................6Italiano...............................................................................................................................................7Español .............................................................................................................................................8
2RM182 Manual SupplementFor Users in the United States and CanadaPlace this supplement in your manual.This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) This device must accept anyinterference received, including interference that can cause undesiredoperation.Federal Communications Commission ComplianceThis equipment is intended for operation in a commercial environment, incompliance with the requirements for a Class A digital device, pursuant to Part15 of the FCC Rules, and it must not be used in a residential environment;however, it has also been tested and found to comply with the more stringentrequirements for a Class B device, pursuant to Part 15 of the FCC Rules. Itgenerates, uses, and can radiate radio frequency energy. If not installed andused in accordance with the instruction manual, it may cause interference toradio communications. If this equipment causes interference, the user will berequired to correct the interference at the user’s own expense.Note: In order to maintain compliance with FCC Rules, the input/output (I/O) cablesthat interconnect between the device and any peripheral must be as specified byIntermec.Operators Warning:To comply with the FCC’s RF exposure requirements and minimize healthhazards:The user shall not touch the antenna of this device, when the device is in usein handheld and vehicle mount terminals, where low gain antennas are used.In some products (Models 2415 and 6400), the antena is inside the product. Inother products the antenna is a small dipole usually attached to the side or tothe top of the product.With handheld devices, the user shall ensure that the device is at least 20 cm (8inches) away from their body, when the transceiver is in use.The user shall stay at least 20 cm (8 inches) away from the antenna of thisdevice, when the device is in use in access points and other hosts , wherehigher gain antennas may be used.
3RM182 Manual SupplementFor Users in the United States and CanadaInstallers Warning:To comply with the FCC’s RF exposure requirements and minimize healthhazards:Host devices with higher gain antennas such as access points must be installedin such a way that the user will be at least 20 cm (8 inches) away from theantenna, when the device is in use.The installers should not forget that the burden of maintaining this distance ison the installer and not the user. The antennas should be installed in a mannerthat will comply with this requirement.CautionChanges or modifications not expressly approved by Intermec could void theuser’s authority to operate this equipment.Industry Canada ComplianceThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.This device requires a radio license, unless it is used totally inside a building.(The user must obtain this license.)Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur lematériel brouilleur du Canada.Cet appareil exige une license radio à moins d’être entièrement installé dans unbâtiment. (L’utilisateur doit obtenir cette license.)Additional EMI/RFI ComplianceThis device meets the Class B limit requirements of CISPR 22.Agency ApprovalsThis device is UL Listed and CSA Certified.
4RM182 Manual SupplementFor Users Outside of the United States or CanadaPlace this supplement in your manual.This product complies with ETS 300 328, ETS 300 826 and EN 60950 as requiredby the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the LowVoltage Directive 73/23/EEC as amended by 93/68/EEC.Agency ApprovalsUL Listed, CSA certified. The power supply is TÜV GS licensed and NYCEcertified for safety.Additional EMI/RFI ComplianceThis device meets the Class B limit requirements of CISPR 22.AttentionPlease note the following important precautions:•Do not operate or store the unit outside the specified temperature range.•Do not operate the unit without an antenna and do not operate the unitwith any uncertified external peripherals (e.g., high gain antenna, amplifier,etc.). Using peripherals not certified by Intermec will violate the typeapproval conditions.•Operate the unit only with a valid type approval label for your country.Use of an incorrect country configuration may violate your nationalfrequency allocation.For additional information regarding the utilization of Intermec’s wirelessproducts or type approvals in your country, please contact the Intermec dealeror sales office from which you purchased this product.You may receive a copy of the current type approval certificate for this productby calling your local Intermec representative.Operating Temperature0°C to +55°CStorage Temperature-40°C to +65°C
5Supplément au manuel du modèle RM182Pour les utilisateurs en dehors du Canada et desEtat-unisVeuillez placer ce supplément dans votre manuel.Déclaration de conformité européenneCe produit est conformé aux normes ETS 300 328, ETS 300 826 et EN 60950 telqu’exigé par la directive de l’EMC nº 89/336/CEE amendée par l’article92/31/CEE et par la directive sur la basse tension nº 73/23/CEE amendée parl’article 93/68/CEE.Homologations reconnuesSur la liste d’homologation UL, a une certification CSA et NYCE. Le blocd’alimentation a obtenu un permis de TÜV GS pour la sécurité.Conformité additionelle à la norme EMI/RFICet appareil respecte les limites imposées pour la Classe B par le CISPR 22.Attention!Lisez avec attention et suivez les précautions d’emploi suivantes:•Ne pas utiliser, ou stocker les matériels à des températures hors des limitesspécifiées.•Ne pas utiliser le matériel sans l’antenne connectée, ou relie à unpériphérique non certifié (Antenne grand gain, amplificateur, etc.).L’utilisation de périphériques non certifiés se ferait en violation de lacertification Intermec.•N’utiliser le matériel que s’il est étiqueté avec le logo d’homologation.L’utilisation d’un matériel non configuré pour un autre pays, violerait lesallocations de fréquences.Pour plus d’information, sur l’utilisation des matériels à transmission radio, oudu certification relatif à votre pays, contacter le Service Commerical Intermec,ou le revendeur chez lequel vous avez acheté le produit.Vous pouvez vous procurer une copie du certificat d’homologation encontactant votre représentant local des vertes d’Intermec.Température d’utilisation0°C à +55°CTempérature de stockage-40°C à +65°C
6RM182 Ergänzung zum HandbuchFür Benutzer außerhalb von Kanada oder denVereinigten StaatenLegen Sie diese Ergänzung in Ihr Handbuch.Europäische ÜbereinstimmungserklärungDieses Produkt entspricht ETS 300 328, ETS 300 826, und EN 60950 inÜbereinstimmung mit der EMC-Richtlinie 89/336/EWG, abgeändert durch92/31/EWG, und der Richtlinie für Niederspannung 73/23/EWG, abgeändertdurch 93/68/EWG.Zulassungen der AgenturDieses Produkt ist in die UL-Liste aufgenommen und zugelassen durch CSAund NYCE. Das Netzanschluß ist vom TÜV GS gemäß der Sicherheitsnormlizenziert.Zusätzliche Elektromagnetische Störung-ÜbereinstimmungDieses Gerät entspricht den Grenzbestimmungen der Klasse B von CISPR 22.AchtungBitte beachten Sie folgende wichtige Hinweise:•Lagern oder betreiben Sie die Geräte niemals außerhalb der angegebenenTemperaturbereiche.•Betreiben Sie die Geräte niemals ohne Antenne oder mit irgendwelchennicht zugelassenen Zusatzeinrichtungen. (z.B. Richtantenne, Verstärkeretc.). Der Einstaz von Zusatzeinrichtungen, die nicht von Intermeczugelassen sind, verstoßen gegen die Typenzulassung.Für weitere Fragen bezüglich Einsatz von kabellosen Geräten oderTypenzulassungen in Ihrem Land rufen Sie bitte den nächsten IntermecHändler oder die Vertriebsorganisation, bei der Sie die Geräte erworbenhaben, an.Sie können eine Kopie der aktuellen Zulassungsurkunde erhalten, indem Siesich mit lhrem örtlichen Intermec-Vertreter in Verbindung setzen.Betriebstemperatur0°C zu +55°CLagertemperatur-40°C zu +65°C
7RM182 Supplemento al manuale Per gli utenti al difuori del Canada o degli Stati UnitiSi prega di collocare questo supplemento nel manuale`.Dichiarazione europea di conformitàQuesto prodotto è conforme a ETS 300 328, ETS 300 826, e EN 60950 comerichiesto dalla Direttiva EMC 89/336 CEE, modificata dalla 92/31/CEE e dallaDirettiva sulla bassa tensione 73/23/CEE, modificata dalla 93/68/CEE.OmologazioneApprovato dalla UL e munito di certificazione CSA e NYCE. L’alimentatore èautorizzato da TÜV GS per le misure di sicurezza.Ulteriore conformità con EMI/RFIQuesto dispositivo soddisfa i requisiti concernenti i limiti della Classe B diCISPR 22.AttenzioneSi prega di osservare le seguenti precauzioni:•Azionare e conservare il dispositivo soltanto nei limiti delle temperatureminime e massime indicate.•Non azionare il dispositivo senza antenna. Non azionare il dispositivo conperiferiche esterne (ad esempio, antenna a guadagno elevato, amplificatoreecc.) senza certificazione Intermec. L’utilizzo di periferiche senzacertificazione Intermec rappresenta una violazione dei termini diomologazione.•Azionare il dispositivo soltanto se dotato dell’etichetta di omologazionevalida per il paese in questione. L’utilizzo di una configurazione che nonsia quella prevista per il paese può risultare nella violazione delle normeche regolano l’utilizzo delle frequenze a livello nazionale.Per ulteriori informazioni sull’omologazione o sull’utilizzo dei prodottiwireless della Intermec nel paese in questione, rivolgersi al rivenditore o agliuffici commerciali Intermec presso i quali è stato acquistato il prodotto.Per ottenere una copia dell’attuale certificato di omologazione relativo a questoprodotto, rivolgersi al rappresentante Intermec della zona.Temperatura di azionamento0°C ÷ +55°CTemperature limite di magazzinaggio-40°C ÷ +65°C
8Suplemento del manual del producto RM182Para usuarios fuera de Canada o de los EstadosUnidosPor favor, coloque este suplemento dentro de su manual.Declaración de conformidad europeaEste producto cumple con las normas ETS 300 328, ETS 300 826, y EN 60950, deacuerdo a lo establecido por la  directiva de EMC 89/336/CEE corregida por92/31/CEE y por la directiva referente al bajo voltaje 73/23/CEE corregida por93/68/CEE.CertificationesRegistrada por UL, certificada  por CSA y NYCE. El alimentador cuenta con lalicencia de seguridad TÜV GS.Conformidad adicional con EMI/RFIEste dispositivo cumple con los límites requeridos para la Clase B de CISPR 22.AtenciónPor favor observe las siguientes precauciones importantes:•No opere ni guarde la unidad fuera de la gama de temperaturasespecificada.•No opere la unidad sin antena ni con dispositivos periféricos externos nocertificados, tales como antenas de alta amplificación, amplificadores, etc. Eluso de dispositivos periféricos no certificados por Intermec violará lascondiciones de tipo de uso.•Opere la unidad únicamente si ésta cuenta con un rótulo de tipo de usoválido para su país. El uso de una configuración de país incorrecta puedeviolar la asignación de frecuencia de su país.Para obtener información adicional acerca del uso de los productosinalámbricos de Intermec o sobre la aprobación de los tipos para su país,comuníquese con su representante de Intermec o con la oficina de ventasdonde adquirió este producto.Puede recibir una copia del certificado de tipo de uso actual para este productollamando a su representante local de Intermec.Temperaturas de operaciónDe 0°C a +55°CGama de temperaturas para almacenajeDe -40°C a +65°C
9P/N XXXXXX-002

Navigation menu