Intermec Technologies RM182-24 2.4 GHz FHSS Limited Module Approval User Manual

Intermec Technologies Corporation 2.4 GHz FHSS Limited Module Approval RM182 Manual Supplement

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

Contents

Revised User Manual

P/N XXXXXX-001Important RM182  Information!ContentsFor Users in the United States and Canada....................................................................................2For Users Outside of the United States or Canada........................................................................4Français.............................................................................................................................................5Deutsch...............................................................................................................................................6Italiano...............................................................................................................................................7Español .............................................................................................................................................8
2RM182 Manual SupplementFor Users in the United States and CanadaPlace this supplement in your manual.This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) This device must accept anyinterference received, including interference that can cause undesiredoperation.Federal Communications Commission ComplianceThis equipment is intended for operation in a commercial environment, incompliance with the requirements for a Class A digital device, pursuant to Part15 of the FCC Rules, and it must not be used in a residential environment;however, it has also been tested and found to comply with the more stringentrequirements for a Class B device, pursuant to Part 15 of the FCC Rules. Itgenerates, uses, and can radiate radio frequency energy. If not installed andused in accordance with the instruction manual, it may cause interference toradio communications. If this equipment causes interference, the user will berequired to correct the interference at the user’s own expense.Note: In order to maintain compliance with FCC Rules, the input/output (I/O) cablesthat interconnect between the device and any peripheral must be as specified byIntermec.Operators Warning:To comply with the FCC’s RF exposure requirements and minimize healthhazards:The user shall not touch the antenna of this device, when the device is in usein handheld and vehicle mount terminals, where low gain antennas are used.In some products (Models 2415 and 6400), the antena is inside the product. Inother products the antenna is a small dipole usually attached to the side or tothe top of the product.With handheld devices, the user shall ensure that the device is at least 20 cm (8inches) away from their body, when the transceiver is in use.The user shall stay at least 20 cm (8 inches) away from the antenna of thisdevice, when the device is in use in access points and other hosts , wherehigher gain antennas may be used.
Download:
Mirror Download [FCC.gov]
Document ID98895
Application IDzgpjYSRbtZcPXi92ZbtZfw==
Document DescriptionRevised User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.81kB (72606 bits)
Date Submitted2000-05-04 00:00:00
Date Available2000-05-15 00:00:00
Creation Date2000-05-03 13:46:29
Producing SoftwareAcrobat PDFWriter 3.02 for Windows NT
Document Lastmod2000-05-03 13:47:35
Document TitleRM182 Manual Supplement.PDF
FCC ID Filing: HN2RM182-24

Navigation menu