Intermec Technologies WN-5MP01 WN-5MP01 User Manual Exhibit J
Intermec Technologies Corporation WN-5MP01 Exhibit J
User Manual
Exhibit J: User Manual FCC ID: HN2WN-5MP01 Part No. 072869-001 Important WN-5MP01 Information! Place this supplement in your manual. For Users in the United States and Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Federal Communications Commission Compliance This equipment is intended for operation in a commercial environment, in compliance with the requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be used in a residential environment. It generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the interference at the user’s own expense. Operation Warning To comply with the FCC’s RF exposure requirements and minimize health hazards: The user shall stay at least 20 cm (8 in) away from the antenna of this device, when the device is in use. The operation of this device is restricted to indoors only for the 5.1505.350 GHz configuration with integral antenna. No such restriction is placed on the 5.250-5.350 GHz configuration with removable antennas. This device will automatically discontinue transmission in case of either absence of information to transmit or operational failure. Installation Warning To comply with the FCC’s RF exposure requirements and minimize health hazards: Access points must be installed in such a way that the user will be at least 20 cm (8 in) away from the antenna, when the device is in use. The installers should not forget that the burden of maintaining this distance is on the installer and not the user. The antennas should be installed in a manner that will comply with this requirement. Changes or modifications not expressly approved by Intermec could void the user’s authority to operate this equipment. To maintain compliance with FCC Rules, the input/output (I/O) cables that interconnect between the device and any peripheral must be as specified by Intermec. Industry Canada Compliance This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This device requires a radio license, unless it is used totally inside a building. (The user must obtain this license.) Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil exige une license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir cette license.) Agency Approvals This device is UL and cUL listed (UL 1950/C22.2 #950) for safety when powered by an Intermec power supply. Part No. 072869-001 *072869-001* *072869-001* 6001 36th Avenue West Everett, WA 98203 U.S.A. www.intermec.com © 2002 Intermec Technologies Corp. All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:08:09 19:46:01Z Modify Date : 2002:08:29 14:09:00-06:00 Page Count : 3 Creation Date : 2002:08:09 19:46:01Z Mod Date : 2002:08:29 14:09:00-06:00 Producer : Acrobat Distiller 5.0 (Windows) Author : Vicki Albertson Metadata Date : 2002:08:29 14:09:00-06:00 Creator : Vicki Albertson Title : Microsoft Word - Exhibit J User Manual.doc Has XFA : NoEXIF Metadata provided by EXIF.tools