Intermec F4 Users Manual

2015-02-02

• Preface
  • Contents
  • Disclaimer
  • Copyright Information
  • Trademarks
  • FCC Notice (United States of America)
  • DOC Notice (Canada)
  • GS Notice (Germany)
  • EU Standard EN 55022 (The European Union)
  • Declaration of Conformity (CE)
• 1. Introduction
  • Description
  • Safety Precvautions
  • Product Labeling
• 2. Installation
  • Unpacking
  • Front View
  • Rear View
  • Media Compartment
  • Print Mechanism
  • Connections
    • Power
    • Computer
  • Controls and Incidactors
    • Control Lamps
    • Display
    • Keyboard
    • Beeper
• 3. Starting Up
• Switching On
• 4. Media Load
  • Tear-Off
  • Tear-Off with Quick-Load
  • Peel-Off
  • External Supply
• 5. Thermal Transfer Printing
  • Ribbon Load
• 6. Setting Up the Printer
  • Description
  • Default Setup
  • Setup Parameters
    • Serial Communication
      • Baud Rate
      • Data Bits
      • Parity
      • Stop Bits
      • Protocol
    • Test/Service
      • Testprint
      • Data Dump
      • Memory Reset
      • Label Rest Dots
      • Form Adj Dots X
      • Form Adj Dots Y
    • Media
      • Media Type
      • Paper Type
      • Label Length
      • Sensitivity
      • Darkness
• 7. Setup Mode
  • Entering Setiup Mode at Installation
  • Navigating in Setup Mode
  • Setup Mode Overview, Part 1
  • Setup Mode Overview, Part 2
  • Setup Mode Overview, Part 3
• 8. Options
  • Introduction
  • DTP Model
  • Side Doors and Megatop
  • Integral Liner Takeup Unit
  • Media Supply Hub
  • 3-inch Adapter
  • Quick-Load Guides
  • Label Taken Sensor
  • Interface Boards
• 9. Troubleshooting
• 10. Maintenance
  • Printhead Cleaning
  • External Cleaning
  • Cleaning the Media Guides
  • Printhead Replacement
• 11. Adjustments
  • Narrow Media Adjsutment
  • Label Stop Sensor Position
  • Printhead Pressure
  • Ribbon Break Shaft
• Appendix 1: Technical Data
• Appendix 2: Media Specifi cations
  • Direct Thermal Media
  • Thermal Transfer Media
  • Media Roll Size
  • Media
    • Non-Adhesive Strip
    • Self-Adhesive Strip
    • Self-Adhesive Labels
    • Tickets with Gap
    • Tickets with Black Mark
  • Transfer Ribbons
  • Setting the Media Sensitivity Number
• Appendix 3:
  • RS-232 Interface
  • IEEE 1284 Parallel Interface Board
  • EasyLAN 100i Interface Board
• Appendix 4: Supported IPL-3 Commands