Intex Development FLS625 FLOATING POOL SPEAKER WITH LED LIGHT User Manual Rev 1

Download:
Mirror Download [FCC.gov]
Document ID	3511347
Application ID	HWbFR9vguHl2lnKTDfGjNg==
Document Description	User Manual_Rev 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.5kB (1918718 bits)
Date Submitted	2017-08-15 00:00:00
Date Available	2017-08-16 00:00:00
Creation Date	2017-07-25 08:59:07
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-08-14 16:21:25
Document Title	User Manual_Rev 1
Document Creator	Adobe InDesign CS6 (Windows)

(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
INTEX® OWNER'S MANUAL
FLOATING POOL SPEAKER WITH LED LIGHT
Model FLS625 IPX7
337
PO
READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
WARNING
• This product is not a toy, keep away from children.
• Do not dispose of batteries in regular trash, municipal waste stream or by fire
as battery may leak or explode.
• Do not stare directly at the light emitted by this product.
• This product is resistant to water, but it is not designed to be completely
submerged. Submersion could cause water to enter the product causing
damage to the electronics.
• Do not sit, straddle, step or exert pressure on the product.
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY
DAMAGE OR OTHER INJURY.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
�
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
Page 1
337-*PO-R0-1807
(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
MPE Reminding
To satisfy FCC RF exposure requirements, a separation distance of 20 cm
or more should be maintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations at closer than this distance is not
recommended.
General Information and Maintenance Instructions:
•
•
•
•
•
•
•
•
•
•
Bluetooth open air transmission range: 25-30 m (82-98 ft).
This product operates on three (3) AA size batteries (not included).
Alkaline batteries are recommended. Rechargeable batteries are okay to use.
Remove batteries if speaker is not to be used for an extended period of time.
Do not mix old and new batteries. Do not mix alkaline, standard (Carbon Zinc), or rechargeable (Nickel - Cadmium) batteries.
Dry any water on the product prior to battery installation. Remove used
batteries promptly. Replace all 3 batteries at the same time.
Always purchase the correct size and grade of battery most suitable for the
intended use. Ensure batteries are installed correctly with regard to polarity
(+ and -). Clean the battery contacts and also those of the device prior to
battery installation.
To clean the product, use only a damp cloth. Avoid strong cleaner, excessive
water and abrasive brush.
Do not use needle or any sharp object to clean the speaker mesh surface as
this will damage the waterproof layer.
Store the product indoors when not in use.
©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains
pays sous licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen
verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex
Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach,
CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión
Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal
– The Netherlands
www.intexcorp.com
SAVE THESE INSTRUCTIONS
Page 2
337-*PO-R0-1807
(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
Parts reference:
QTY.
SPARE PART NO.
SPEAKER BODY
12553
BATTERY HOUSING
12401
HOUSING COVER
12400
REF. NO.
DESCRIPTION
Due to a policy of continuous product improvement, Intex reserves the right to
change specifications and appearance, which may result in updates to the
instruction manual without notice.
To install or replace the batteries:
1. Dry product completely. Unscrew the housing cover (3) and take out the battery
housing (2) (see Fig 1).
2. Insert 3 AA size batteries following the orientation shown on the battery housing (2)
(see Fig 2).
3. Reinstall the battery housing (2) and securely tighten the housing cover (3) by
hand only (see Fig 3).
Fig 1
Fig 2
Fig 3
Note: When the batteries are low in power, the device will flash a red light
for about 10 seconds and then switch off automatically. Replace the batteries
promptly.
SAVE THESE INSTRUCTIONS
Page 3
(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
Operation instructions:
1. Turn ON: Press
button for 2 seconds, the
device will emit a sound and flash a blue light
for 1 second. For first time after purchase, a
blue light will flash indicating the speaker is in
pairing mode. See below “Pairing and
Connecting” section for details.
Turn OFF: Press
button for 2 seconds, the
device will emit a sound and flash a red light for 1 second.
2. Pause / Play:
When the speaker is playing the music, press
button once to pause the music, press
again to continue playing the music.
3. Volume adjustment:
Press and hold
button to increase the volume.
Press and hold
button to decrease the volume.
4. Changing song:
When the speaker is playing the music, short press
button to switch to the "last"
song, short press
button to switch to the "next" song.
5. Pairing and connecting with a Bluetooth device:
Pairing is required to mutually register the information on Bluetooth devices. It is
necessary to pair a device with the speaker to be able to make a Bluetooth connection
for the first time. The speaker can be paired with one Bluetooth device only. Before
operating the speaker do the following:
• Place the Bluetooth device within 1 m (3 ft) of the speaker.
• Make sure the speaker’s batteries are new and stop playback on the Bluetooth device.
• Prepare the operating instructions supplied with the Bluetooth device for reference.
a) Turn on the speaker. When the speaker is turned on for the first time after purchase,
a blue light will begin to flash and the speaker goes into pairing mode automatically
by just turning on the speaker.
b) Perform the pairing procedure on the Bluetooth device; it will display a list of detected
devices, select “FLS625”.
c) The Bluetooth device will make the Bluetooth connection, when the connection is
established the speaker flashing blue light will go away and the multi-color changing
lights will light up.
Note:
•
•
•
Whenever the speaker is turned on, the speaker tries to make a Bluetooth connection
with the last connected Bluetooth device. If the device is nearby and its Bluetooth
function is on, the Bluetooth connection is established automatically and the multi-color
changing light is lit.
When you want to connect another Bluetooth device, terminate the current Bluetooth
connection by operating the currently connected Bluetooth device.
If the Bluetooth connection is not established within 10 minutes, the speaker will turn off
automatically.
SAVE THESE INSTRUCTIONS
Page 4
(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
Troubleshooting guide:
Q. What should I do if the product does not light up?
A. 1. Check the battery housing to ensure 3 AA batteries are installed correctly
with regard to polarity (+ and -).
2. Check that the battery housing is snug (hand tightened).
3. Replace the batteries.
Q. What should I do if the light emitted by this product is too weak?
A. 1. Clean outside surface of the shade using mild soapy solution.
2. Replace all batteries with 3 new AA batteries.
Q. What should I do if the device is flashing red light?
A. Replace the batteries.
Q. What should I do if the speaker sound is blurry, not as loud and clear as
before?
A. 1. Make sure the speaker mesh surface is clean and dry, use a dry cloth to
wipe out any water.
2. Check and adjust the volume and sound settings on your Bluetooth device.
Q. Why my Bluetooth device no longer connects to the speaker automatically after
the speaker is turn on?
A. Activate the Bluetooth on your device. Make sure the speaker (FLS625)
information is stored in your Bluetooth device, if deleted repeat the “Pairing
and connecting with a Bluetooth device” steps.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAN ICES-005 (B)/NMB-005 (B)
SAVE THESE INSTRUCTIONS
Page 5
(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
Limited Warranty
Your FLOATING POOL SPEAKER WITH LED LIGHT has been manufactured using the
highest quality materials and workmanship. All Intex products have been inspected and
found free of defects prior to leaving the factory. This Limited Warranty applies only to the
FLOATING POOL SPEAKER WITH LED LIGHT.
The provisions of this Limited Warranty apply only to the original purchaser and is not
transferable. This Limited Warranty is valid for a period of one (1) year from the date of the
initial retail purchase. Keep your original sales receipt with this manual, as proof of purchase
will be required and must accompany warranty claims or the Limited Warranty is invalid.
If a manufacturing defect is found within this one (1) year period, please contact the
appropriate Intex Service Center listed in the separate “Authorized Service Centers” sheet.
The Service Center will determine the validity of the claim. If the Service Center directs you to
return the product, please carefully package the product and send with shipping and
insurance prepaid to the Service Center. Upon receipt of the returned product, the Intex
Service Center will inspect the item and determine the validity of the claim. If the provisions of
this warranty cover the item, the item will be repaired or replaced at no charge.
Any and all disputes regarding the provisions of this Limited Warranty shall be brought before
an informal dispute settlement board and unless and until the provisions of these paragraphs
are carried forth, no civil action may be instituted. The methods and procedures of this
settlement board shall be subject to the rules and regulations set forth by the Federal Trade
Commission (F.T.C.). IMPLIED WARRANTIES ARE LIMITED TO THE TERMS OF THIS
WARRANTY AND IN NO EVENT SHALL INTEX, THEIR AUTHORIZED AGENTS OR
EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER PARTY FOR DIRECT OR
CONSEQUENTIAL DAMAGES OR LIABILITIES. Some states, or jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
This Limited Warranty does not apply if the product is subject to negligence, abnormal use
or operation, accident, improper operation, improper voltage or current contrary to operating
instructions, or to damage by circumstances beyond Intex’s control, including but not limited
to, ordinary wear and tear and damage caused by exposure to fire, flood, freezing, rain, or
other external environmental forces. This Limited Warranty applies only to those parts and
components sold by Intex. The Limited Warranty does not cover unauthorized alterations,
repairs or disassembly by anyone other than Intex Service Center personnel.
DO NOT GO BACK TO THE PLACE OF PURCHASE FOR RETURN OR REPLACEMENT.
IF YOU ARE MISSING PARTS OR NEED ASSISTANCE, PLEASE CALL US TOLL-FREE
(FOR U.S. AND CANADIAN RESIDENTS): 1-800-234-6839.
Proof of Purchase must accompany all returns or the warranty claim will be invalid.
SAVE THESE INSTRUCTIONS
Page 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Create Date                     : 2017:07:25 08:59:07+08:00
Metadata Date                   : 2017:08:14 16:21:25+08:00
Modify Date                     : 2017:08:14 16:21:25+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:d1fc6185-7b7f-40c4-84ab-275ba28b8d49
Original Document ID            : xmp.did:A582C033683BE1118D128BD9F357D7F4
Document ID                     : xmp.id:D74F2D76D470E711BDA9D8D6DA684426
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:34DAAC8A4F70E711B1D4F5ACCF713381
Derived From Document ID        : xmp.did:C8F343772841E711A442B01E784B913F
Derived From Original Document ID: xmp.did:A582C033683BE1118D128BD9F357D7F4
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:07:25 08:59:07+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 6
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools