Intracom Asia 525756 Wireless 300N Range Extender User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2629720
Application ID	Gga/ocHgoOkGZDkOj2misg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.86kB (523239 bits)
Date Submitted	2015-05-29 00:00:00
Date Available	2015-05-29 00:00:00
Creation Date	2015-05-29 11:16:23
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-05-29 11:17:17
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Open Source Code
WiFi Repeater
User Manual
Package Contents
This product includes software codes developed by third parties. These software
codes are subject to either the GNU General Public License (GPL), Version 2, June
1991 or the GNU Lesser General Public License (LGPL), Version 2.1, February
1999. You can copy, distribute, and/or modify in accordance with the terms and
conditions of GPL or LGPL.
The source code should be complete, if you think our need to provide any additional
source code files under GNU General Public License (GPL), please contact us. We
are committed to meeting the requirements of the GNU General Public License
(GPL) . You are welcome to contact us local office to get the corresponding software
and licenses. Please inform us your contact details and the product code. We will
send you a CD with the software and license for free.
Before you starting to use this router, please check if
there’s anything missing in the package, and contact
your dealer of purchase to claim for missing items:
How to configure the Wi-Fi Repeater
· 1 x Wireless-N Repeater
· 1 x RJ-45 Networking Cable
· 1 x Quick installation Guide
You can configure the Wi-Fi Repeater by connecting it with your computer/laptop with
enclosed RJ45 cable or wirelessly.
Getting Started
Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (as shown below), please do the following:
A. Configure the Wi-Fi Repeater wirelessly.
A1. Plug the Wi-Fi Repeater to a wall socket.
Wireless Repeater Mode
Input:100-240V 50/60Hz 0.3A
You will need WiFi
AP/Router Internet access
Manufacturer:Winstars Technology Limited
Introduction：
KARPRWL11NA
The WiFi Repeater is a combined wired/wireless network connection device
designed specifically for small business, office, and home office networking
requirements. It allows a wireless network to be expanded using multiple access
points without the need for a wired backbone to link them. It also works well with
other 11b/g and 11n protocol wireless products.
Wireless AP Mode
Power Indicator
You will need broadband
Router Internet access
Wireless Indicator
RJ45 Port
WPS Indicator(Optional)
Reset
LAN Indicator
Reset
Note: Please check whether the WiFi-Repeater accord with factory default settings
once you can’t download http://192.168.10.1. If you are still not sure what reasons,
you can reset the WiFi-Repeater, just need to press the reset button for 10 seconds,
then try again.
NOTE: If you need to reset the Wi-Fi Repeater, you need press and hold the reset
button inside the tiny hole for 10 seconds.
A4. The login screen below will appear. Enter the “User Name” and “Password” then
click “OK” to login. The default User name is “admin” and Password is “admin”.
Wireless-N Wifi Repeater
A6. Select your Wireless SSID to continue.
A3. Open web browser and type
http://192.168.10.1 in the browser's address
box. This number is the default IP address for
this device.
Connect the WiFi-Repeater
to your Router/Switch with
RJ-45 Cable
WPS Button(Optional)
01
A2. Click on the network icon (
or
) on
the right bottom of your desktop. You will find
the signal from the Wi-Fi Repeater. Click on
‘Connect’ and wait for a few seconds.
02
Wireless-N Wifi Repeater
B. Configure the Wi-Fi Repeater with RJ45 Cable.
03
Wireless-N Wifi Repeater
4. The following message will be displayed on your web browser:
1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the
Wi-Fi Repeater with enclosed RJ45 Cable.
2. Follow process A3 to A7 to configure your Wi-Fi Repeater.
C. Configure the Wireless AP Mode.
1. Plug the Wi-Fi Repeater into a wall socket.
2. Follow process A3 to A4.
3. Click on ‘AP’ to continue.
A5. After logging in, you will see the web page below: Click on ‘Repeater’ to continue.
A7. When you see below, please do not change any setting but only insert the key
of your network.
SSID
Channel
the "SSID" of your wireless network.
Auto (recommend)
Security type
Setup the wireless security and encryption to prevent from
unauthorized access and monitoring.
Supports 64/128-bit WEP, WPA, WPA2, WPA/WPA2 encryption
methods.
Security key
the "Password" of your wireless network.
Click on ‘Apply’ button, The Repeater will restart.
Wait a few seconds your Wi-Fi Repeater is ready for use.
Click on ‘Apply’ button, The Repeater will restart.
Wait for a few seconds your Wi-Fi Repeater is ready for use.
* The default wireless SSID and Security key of Wi-Fi Repeater is same as your
AP/router.
04
Wireless-N Wifi Repeater
展开尺寸: 3 6 0 x 2 4 0 m m
成品尺寸: 1 20 x 9 0 m m
05
Wireless-N Wifi Repeater
06
Wireless-N Wifi Repeater
07
Wireless-N Wifi Repeater
How to connect your computer/laptop with the
Wi-Fi Repeater
Adding a Wireless computers to the WiFi-Repeater
1. Log on to the computer.
2. Open Connect to a Network by right-clicking
the network icon (
or
) in the otification
area.
3. Choose the wireless network from the list
that appears, and then click Connect.
4. Type the network security key or passphrase
if you are asked to do so, and then click OK.
You'll see a confirmation message when you
are connected to the network.
Adding a Wireless computers to the WiFi-Repeater with WPS Button
1. Log on to the computer.
2. Press the WPS button of the WiFi Repeater directly for 2 - 3 seconds.
3. Press the WPS button of the Wireless Adapter directly for 2 - 3 seconds. Click
Finish to complete the WPS configuration. (Please check your Wireless adapter
Manual with WPS configuration)
4. You should see icons
for the computer you added and for the other
computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the WiFi-Repeater
1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the
Wi-Fi Repeater with enclosed RJ45 Cable.
2. To confirm that you added the computer, do the following:
Open Network by clicking the Start button
, and then clicking Control Panel. In
the search box, type network, and then, under Network and Sharing Center, click
View network computers and devices. You should see icons
for the computer
you added and for the other computers and devices that are part of the network.
5. To confirm that you added the computer, do the following:
Open Network by clicking the Start button
, and then clicking Control Panel. In
the search box, type network, and then, under Network and Sharing Center, click
View network computers and devices. You should see icons
for the computer
you added and for the other computers and devices that are part of the network.
Note : If you don't see icons
file sharing might be turned off.
How to configure your computer/laptop with the
Network IP Address
1.
Log on to the computer.
2. Click the “Start” button (it should be
located at the lower-left corner of your
screen), then click “Control Panel”. Click
“View Network Status and Tasks”, and
then click “Manage Network
Connections”. Right-click “Local Area
Network”, then select “Properties”. When
the “Local Area Connection Properties”
window appears, select “Internet Protocol
Version 4 (TCP/IPv4)” and then click
“Properties”.
3. Setting IP address manually: Type IP
address is 192.168.10.x (x is from 2 to
254), and Subnet mask is 255.255.255.0.
Type the Router’s LAN IP address (the
default IP is 192.168.10.1) into the Default
gateway field.
in the Network folder, then network discovery and
Configuring via Web Browser
Wireless Base Configuration – AP Mode
In AP mode and click “Wireless -> Basic Settings” located at the web management
interface, the following message will be displayed on your web browser:
You could configure the minimum number of Wireless settings for communication,
such as Network Name (SSID) and Channel. The Access Point can be set simply
with only the minimum setting items.
Wireless Enable
SSID
Channel
Wireless On/Off
the "SSID" of your wireless network.
Auto (recommend)
Security type
Setup the wireless security and encryption to
prevent from unauthorized access and monitoring.
Supports 64/128-bit WEP, WPA, WPA2,
WPA/WPA2 encryption methods.
Security key
the "Password" of your wireless network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
08
Wireless-N Wifi Repeater
Wireless Base Configuration – Repeater Mode
In Repeater mode and click “Wireless-> Basic Settings” located at the web management
interface, the following message will be displayed on your web browser:
Wireless Enable
Delete
Repeater ssid
Security type
Security key
09
Wireless-N Wifi Repeater
Change Management password
10
Wireless-N Wifi Repeater
Firmware Upgrade
Default password of Wireless Router is “admin”, and it’s displayed on the login
prompt when accessed from web browser. There’s a security risk if you don’t change
the default password, since everyone can see it. This is very important when you
have wireless function enabled.
The system software used by this router is called as ‘firmware’, just like any
applications on your computer, when you replace the old application with a new one,
your computer will be equipped with new function. You can also use this firmware
upgrade function to add new functions to your router, even fix the bugs of this router.
To change password, please follow the following instructions:
Please click ‘Management -> Password‘ menu on the web management interface,
the following message will be displayed on your web browser:
Please click ‘Management-> Upgrade Firmware’ located at the web management
interface, and then the following message will be displayed on your web browser:
Wireless On/Off
Remove the repeater connection profile
the “SSID” of your repeater wireless network.
Setup the repeater ssid security type.
the "Password" of your repeater wireless network.
Click ‘Browse…’ or ‘Choose File’ button first; you’ll be prompted to provide the
filename of firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your router.
Click ‘Apply’button, The WiFi Repeater will restart.
If you want to keep original password unchanged, click ‘Cancel’.
Click ‘Apply’ button, The WiFi Repeater will log off.
12
Click ‘Apply‘ button, The WiFi Repeater will restart.
Wireless-N Wifi Repeater
13
Wireless-N Wifi Repeater
After a firmware upgrade file is selected, click ‘Upload‘ button, and the router will start
firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser or physically
disconnect your computer from router. If the firmware you uploaded is corrupt, the
firmware upgrade will fail, and you may have to return this router to the dealer of
purchase to ask for help. (Warranty voids if you interrupted the upgrade procedure).
14
Wireless-N Wifi Repeater
11
Wireless-N Wifi Repeater
Factory Default and Settings Backup , Restore
You can backup all Setting of this router to a file, so you can make several copied of
router configuration for security reason.
To backup or restore
router setting, please
follow the following
instructions:
Please click
‘Save/Reload setting’
located at the web
management interface,
then the following
message will be
displayed on your web
browser:
Save Settings
Press ‘Save…’ button, you can please save it as another
filename for different versions, and keep it in a safe place.
Load Settings
Press ‘Browse…’ to pick a previously-saved configuration
file from your computer, and then click ‘Upload…’. After the
configuration is uploaded, the router’s configuration will be
replaced by the file you just uploaded.
Reset Settings
Click this ‘Load default’ button to remove all settings
The socket-outlet shall be installed near the equipment and shall be easily accessible
15
Wireless-N Wifi Repeater
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2015:05:29 11:17:17+08:00
Create Date                     : 2015:05:29 11:16:23+08:00
Metadata Date                   : 2015:05:29 11:17:17+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : WN518N璇存槑涔︿腑鎬?V3.2.cdr
Creator                         : Administrator
Document ID                     : uuid:4cb3ba7b-8b1f-4e10-906b-b9df2c9b57d1
Instance ID                     : uuid:f848a35d-6356-4586-b94c-0628727679ae
Producer                        : Acrobat Distiller 7.0 (Windows)
Has XFA                         : No
Page Count                      : 3
Author                          : Administrator

EXIF Metadata provided by EXIF.tools